CC Marine 2013-14 Catalogue_Seating

CLASSIFICATIONS

A Few Notes about ABYC and H-31…The American Boat and Yacht Council has recommendedseating standards for the marine industry. These standards helpclassify pedestal applications into two separate categories.These are:CLASS ASeat designed for occupancy while the boat is under way at anyspeed.CLASS BSeat designed for occupancy only at boat speeds not exceedingfive miles per hour.

Within each of these classifications all pedestals must pass aseries of tests, (horizontal and vertical impacts, torque andstatic load test). There are also two types of Class A seats.Those are:CLASS A PASSENGERSeat mount must resist 30 foot pounds of torque.

CLASS A DRIVERSeat Mount must incorporate a “mechanical interference lock”and resist 150 foot pounds of torque.

AP

AD

A

B SEATING&TABLES

602

BOAT SEATS

FEATURES:• High-impact injection molded seat frame• Aluminum hinges• 28 oz. marine vinyl• High compression foam padding• 6 year warranty on frame• 3 year warranty on upholstery

Dimensions: Width: 16-1/2"Depth: 18"Height: 22"

FEATURES:• High impact plastic frame• Concave back for lumbar support• Compression foam padding• Plastic sealed to resist moisture• Heavy duty 28 oz. marine grade vinyl• UV treated to resist mildew & fading• Dacron thread• No-pinch aluminum hinges• Less swivel• 6 year warranty on frame• 3 year warranty on upholstery

Dimensions: Width: 16-1/2"Depth: 18"Height: 22"

Cuddy Marble Grey /Cuddy Charcoal /

Cuddy White870-12280

Cuddy Marble Grey /Cuddy Midnight Blue /

Cuddy Charcoal870-12281

Cuddy Marble Grey /Cuddy Red /

Cuddy Charcoal870-12282

Cuddy Midnight Blue /Cuddy Marble Grey /Cuddy Charcoal870-12283

Cuddy Red /Cuddy Charcoal /Cuddy White870-12284 For more information see: www.wiseseats.com

ORDER NO. Mfr. No. DESCRIPTION

870-12280 WD1228-1020 Marble Grey/Charcoal/White870-12281 WD1228-1021 Marble Grey/Midnight Blue/Charcoal870-12282 WD1228-1022 Marble Grey/Red/Charcoal870-12283 WD1228-1023 Midnight Blue/Marble Grey/Charcoal870-12284 WD1228-1024 Red/Charcoal/White

WD 1103 SERIES WITHOUT SWIVEL

Cuddy Marble Grey /RDM Navy870-11031

Cuddy Marble Grey /Dark Red

870-11032

Cuddy Marble Grey /Charcoal

870-11033

Charcoal/Dark Red870-110371

Khaki/Rock Salt870-110391

Charcoal/Marble Grey870-110361

Charcoal/Marble Grey870-110381


870-11031 WD1103LS-1014 Cuddy Marble Grey/RDM Navy870-11032 WD1103LS-1013 Cuddy Marble Grey/Dark Red870-11033 WD1103LS-1015 Cuddy Marble Grey/Charcoal870-110361 WD1103LS-1016 Charcoal/Marble Grey870-110371 WD1103LS-1017 Charcoal/Dark Red870-110381 WD1103LS-1018 Charcoal/Marble Grey870-110391 WD1103LS-1019 Khaki/Rock Salt

WD 1228 SERIES WITHOUT SWIVEL

603

CASTING DECK PRO SEATSWD112BP PRO SEAT W/ EMBOSSED PATTERNHeight: 5.25”Width: 15”Depth: 11”Seat Depth: 8.5”

ORDER NO. Mfr. No. Colour870-112711 WD112BP-711 Navy870-112712 WD112BP-712 Red870-112715 WD112BP-715 Sand870-112716 WD112BP-716 Brown870-112717 WD112BP-717 Grey870-112720 WD112BP-720 Charcoal

FEATURES:• State-of-the-Art, High-Impact Plastic Frames• Heavy-Duty 28 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• Mounting Screws Included• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery

FEATURES:• Mounts on Any StandardPedestal or Swivel

• State-of-the-Art, High-ImpactPlastic Frames

• Compression Foam Padding• Heavy-Duty 26 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery

FISHING SEATS

MOLDED FISHING BOAT SEATSINJECTED MOLDED EXTERNAL PLASTIC FRAME

870-734660

870-112711

WD746PLS PROMOTIONALLOW BACK SEATINJECTED MOLDED PLASTIC FRAMEDIMENSIONS:Height: 18.75”Width: 15.75”Depth: 18.5”Seat Depth: 14”ORDER NO. Mfr. No. Colour870-734660 WD734PLS-660 Grey/Navy870-734661 WD734PLS-661 Grey/Red870-734662 WD734PLS-662 Sand/Brown870-734664 WD734PLS-660 Grey/Charcoal

WD140LS MOLDED PLASTIC BUCKET SEATHeight: 16”Width: 17”Depth: 19”

ORDER NO. Mfr. No. Colour870-140710 WD140LS-710 White870-140713 WD140LS-713 Green870-140717 WD140LS-717 Grey

WD138LS FOLDING PLASTIC SEATWITHOUT SWIVEL & CUSHION PADS

Height: 15.25”Width: 20.25”Depth: 18.5”Seat Depth: 15.5”

ORDER NO. Mfr. No. Colour870-138713 WD138LS-713 Green870-138717 WD138LS-717 Grey

WD139LS CUSHOINED FOLDING PLASTIC SEATWITHOUT SWIVEL

Height: 15.75”Width: 20.25”Depth: 19.7”Seat Depth: 15.5”

ORDER NO. Mfr. No. Colour870-139040 WD139LS-040 Grey Seat with Red Cushion Pads870-139041 WD139LS-04 White Seat with Navy Cushion Pads870-139717 WD139LS-717 Grey Seat with Grey Cushion Pads

870-734662

870-140713 870-138713

870-139040

870-112712

For more information see:www.wiseseats.com

604For more information see www.springfieldgrp.com

BOAT SEATS

NEW-26

SPORT BUCKET CHAIRS W/FLIP-UP BOLSTER

• Marine grade vinyl• Frame is bent aluminum tube• Aluminum rail base with starboard support• Flip-Up Bolster Dimensions: 15"W x 6"D x 4"H• Overall Dimensions: 23"W x 22"D x 20"H• Bolt mounting pattern: 9.5" x 9.5" or 9.5" x 11"

CLASSIC FOLDING DECK CHAIR – CLASS B

• Durable and weather resistant• High density foam cushions covered with heavy-duty marine grade vinylthat is mildew resistant and UV treated• Aluminum with bright dip finish• Double tubes for extra sturdiness• Folds flat for compact storage• Seating Area: 20"W x 16"D x 16"H

ORDER NO. Mfr. No. Colour

104-35010 1043501 White

104-35120 1043512 Blue/White

104-35130 1043513 Tan/White


104-06230 1040623 Grey

104-06290 1040629 White

SOLID COLOURS


104-16030 1041603 Grey

104-16060 1041606 White

MULTI COLOURS


104-16310 1041631 Blue/Grey

104-16330 1041633 Charcoal/Grey

104-16350 1041635 Red/Grey

FISH PRO 100 CHAIRS – FOLDING

• Plush padding• Durable upholstery with hand stitched seams• High back for added support and comfort• Centre pivot comfort fold down• Rigid plastic injection molded frame• Built-in Dry Storage deep pocket with Velcro flap• Threaded T-Nuts and stainless steel screws for easy installation• Dimensions: 19”W x 16.5”D x 21”H

LOW BACK FOLDING COACH BOAT SEATS - ECONOMYwith Standard Hinge

• Plush padding• Durable upholstery• Rigid plastic injection molded frame• Retention strap with snap• Threaded T-Nuts and stainless steel screws for easy installation• Dimensions: 16.5"L x 9.5"W x 16"H


010-80021 Mfr. No. 1080021 White

104-16350 104-16030

104-06290

104-06230

104-35120

104-35010

010-80021

104-35130

Flip-upBolster

605

DELUXE LOUNGE SEATS


870-707710 WD707P1-710 White Lounge Seat, 10" Plastic KD Base870-707715 WD707P1-715 Sand Lounge Seat, 10" Plastic KD Base870-707717 WD707P1-717 Grey Lounge Seat, 10" Plastic KD Base870-707718 WD707P1-718 Light Blue Lounge Seat, 10" Plastic KD Base


870-521710 WD521P1-710 White Lounge Seat, 8" Plastic KD Base870-521712 WD521P1-712 Red Lounge Seat, 8" Plastic KD Base870-521715 WD521P1-715 Sand Lounge Seat, 8" Plastic KD Base870-521717 WD521P1-717 Grey Lounge Seat, 8" Plastic KD Base870-521718 WD521P1-718 Light Blue Lounge Seat, 8" Plastic KD Base

For more information see:www.wiseseats.com

DELUXE PONTOON SERIES

FEATURES:• State-of-the-Art, High-Impact Plastic Frames• Vinyl Finish Molded Plastic Base• Scuff & Mar Resistant• Compression Foam Padding• Removable Seat Cushion for Storage on Jump Seats• Heavy-Duty 26 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery

WD 707P SERIES LOUNGE SEAT – 10" Base HeightDIMENSIONS:

Seat Height: 28”Width: 17.5”Depth: 14.25”Upright Length: 45.5”Extended Length: 64.5”Base Height: 10”Width: 13.5"

WD 521P SERIES LOUNGE SEAT – 8" Base HeightDIMENSIONS:

Seat Height: 25.5”Width: 18”Extended Length: 64.5”Base Height: 8”Width: 13.5”Depth: 36.25”

ORDER NO. Mfr. No. COLOUR

870-1001011 WD100-1011 Grey/Navy/Blue870-1001012 WD100-1012 Grey/Red/Charcoal

870-707718

870-521710

870-0951011

870-1001012

870-521712 870-521715

WD100 37" BENCH AND BASEHeight: 29.25”Width: 37”Depth: 24”Seat Depth: 17.25”

WD95 28" BENCH AND BASEHeight: 29.25”Width: 28”Depth: 24”Seat Depth: 17.25”

FEATURES:• State-of-the-Art, High-Impact Plastic Frames• Vinyl Finish Roto-molded Plastic Base• Scuff and Mar Resistant• Compression Foam Padding• Removable or Lift UpSeat Cushion for Storage• Heavy-Duty 28 oz.Marine Grade Vinyl• Mildew Resistant & UV Treated• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery



606

DELUXE PONTOON SERIES

For more information see: www.wiseseats.com

FEATURES:• State-of-the-Art, High-ImpactPlastic Frames• Vinyl Finish Roto-molded Plastic Base• Scuff and Mar Resistant• Compression Foam Padding

• Removable or Lift Up Seat Cushionfor Storage• Heavy-Duty 28 oz. Marine Grade Vinyl• Mildew Resistant & UV Treated• 6 Year Warranty on Frame• 3 Year Warranty on Upholstery

WD105 ARM REST - SQUARE






870-1201011 WD120LS-1011 Grey/Navy/Blue870-1201012 WD120LS-1012 Grey/Red/Charcoal


870-1251011 WD125FF-1011 Grey/Navy/Blue870-1251012 WD125FF-1012 Grey/Red/Charcoal


870-1050221 WD105-221 Grey

WD125FF FLIP FLOP BENCH SEAT & BASEHeight: 32.25”Depth: 27.5”Width with Base Brackets: 36.5”Width without Base Brackets: 32.5”

• Two position back rest• Anodized aluminum arms• Hinged seat cushion for storage

WD120LS BUCKET SEATHeight: 23”Width: 24.25”Depth: 22.25”Seat Depth: 16.5”

WD115 STEERING CONSOLEWITH TWO CUP HOLDERSHeight: 29.25”Width: 26”Depth: 18”

WD133 RADIUSCORNER SECTION AND BASEHeight: 29.25”Width: 25.375”Depth: 32.75”Seat Depth: 23”

607

MARINE SEATING HARDWARE & ACCESSORIES

• Used worldwide for commercial andindustrial applications• Extra-thick co-polymer constructionwall will not warp from sun, cold, orrough handling• Unique MOLDED-IN retainers to stackboxes on top of one another• Hand-laid lid gasket seals the insidefrom moisture to protect gearfrom damage

• Strong reinforced steel pin hingesystem never fails• Heavy-duty steel bar latch systemwith locking feature keeps gear safeand secure• True square inner side walls allowgear to stack tight without shifting• Beefy carrying handle stores within lid

WD10 BALL BEARING SWIVEL6" SWIVEL• Black, powder coated steel• Swivels 360°• 5-1/4” hole pattern fits most seats

ORDER NO. Mfr. No. Description870-00010 WD10 6" Swivel Only

QUICK DISCONNECT SEAT MOUNTS• Durable molded plastic• Steel rail frame, stainless steel spring

ORDER NO. Mfr. No. Description870-00016 WD16 Quick Disconnect Seat Mount for 7" Swivel870-00017 WD17 Quick Disconnect Seat Mount for 6" Swivel

SURE MOUNT BRACKET KITS• All aluminum

ORDER NO. Mfr. No. Description870-00070 WD70 Sure Mount Bracket Kit 15" Rail Length870-00073 WD73 Sure Mount Bracket Kit 33" Rail Length

5601 SMALL UTILITY DRY BOXOutside: Width 15”, Length 7.75”, Depth 6.5”, Height 14”Inside: Width 12”, Length 6”, Depth 4.75”

ORDER NO. Mfr. No. Description816-56010 5601 Boaters Dry Box, Small

5602 TALL UTILITY DRY BOX- TRAYS INCLUDEDOutside: Width 15”, Length 7.75”, Depth 11.5”, Height 22”Inside: Width 12”, Length 6”, Depth 9.75”

ORDER NO. Mfr. No. Description816-56020 5602 Boaters Dry Box, Tall

5604 LARGE UTILITY DRY BOX- DIVIDER INCLUDEDOutside: Width 15”, Length 8.5”, Depth 9.5”, Height 18”Inside: Width 13”, Length 7.75”, Depth 7.5”

ORDER NO. Mfr. No. Description816-56040 5604 Boaters Dry Box, Large

For more informationsee:

WISE HARDWARE FEATURES A 3 YEAR WARRANTY

WISE HARDWARE FEATURES A 3 YEAR WARRANTY

BOATERS DRY BOXES

870-00016870-00070

870-00073

870-01250870-01251

816-56040

816-56010

WD14 BOAT SEAT CLAMP WITH SWIVEL• Adjusts from 8" to 20 1/2"• Mounts on all flat surfaces• Steel and plastic construction• Plastic coated grippers

ORDER NO. Mfr. No. Description870-00014 WD14 Boat Seat Clamp with Swivel

BLACK STEEL PEDESTALS• Wise Hardware features a 3 Year Warranty• 5-1/4" Hole Pattern• Black Powder Coated Steel

ORDER NO. Mfr. No. Description870-01251 WD1251 7" Boat Seat Pedestal870-01250 WD1250 13" Boat Seat Pedestal

870-00010

608For more information see: www.attwoodmarine.com

Medium GreyORDER NO. 099-71005

White 099-71001 Off-White 099-71002

Seat shell only.Cushions not available.

ORDER NO. Mfr. No. Description099-71001 97100-001-2 Venture Folding Fishing Seat, White099-71002 97100-002-2 Venture Folding Fishing Seat, Off-White099-71005 97100-005-2 Venture Folding Fishing Seat, Medium Grey

PROFORM BOAT SEAT - MOLDED SEAT WITH UPHOLSTERED BACK & SEAT PAD

Attwood's new Venture™ folding fishing seat is designed to satisfy the widest possible range of boaters and boat builders. Mounts in anylocation on bass boats, aluminum fishing boats, fish 'n ski, pontoon and deck boats. Its advanced styling distinguishes it from all other seats on themarket, and its upholstery possibilities let you customize it for a unique look to any boat design, user preference or price point.• Support & Comfort - Ergonomic contours support 90% of all body sizes. Seat back angle and pan contour help prevent excessive pressure and evenly

distribute weight. Side-to-side contour helps stabilize the body in the seat. • Ventilated - Seat back and pan are ventilated to allow pass-through of airand water for increased comfort. • Simple Lock - Simple push button automatically locks seat back in the upright sitting position or in the foldedposition for transport.

• Tough and Durable - Underbody ribs meet ABYC H-31 seating requirements. Injection molded construction using glass-filled polypropylene for ruggeddurability and attractive appearance. • Universal Fit - Molded-in mounting holes with T-nuts. Fits standard pedestal seat mounts.

DIMENSIONS: 17" H x 19" W x 19" L

A new level of marine seating sophistication is now available to boat builders with the Proform Seating System from Attwood. More than a seat,Proform is a complete, flexible system designed to suit the needs of boat builders through a range of upholstery options, trim levels, add-onfeatures, and price points.The result of extensive research with boat owners, builders, and seat designers, Proform is a precise balance of comfort and flexibility. Itsergonomic design ensures comfort and support because it’s contoured to fit the human body. Rugged, molded construction provides durabilityand water-resistance that make Proform ideal for marine use. The versatile shell serves as a platform for a variety of custom applications.Application - Fold-down, pedestal mounted seat design exclusively for bass boats, aluminum fishing boats, fish ’n ski, pontoon and deck boats.Suitable as a fore and aft pedestal mounted seat or as a helm/cockpit seat; for a variety of installations including: mounting to a standard

pedestal pin mount, swivel, seat slider, quick-disconnect mechanism or fixed mount.

Blue / Off-WhiteORDER NO. 099-98305

Grey / Off-WhiteORDER NO. 099-98306

Burgundy / Off-WhiteORDER NO. 099-98307

These attractively patterned Mid-Back Centric SAS spring suspension seats aretrimmed out with backrest upholstered onsert, for deep tuck styling, andmolded polyurethane foam with stapled-in-place upholstery. All upholstery ismarine grade vinyl. Seats include corrosion-resistant T-nuts for attachmentto seat pedestals.Centric SAS™Centric SAS offers outstanding value and performance in a folding seat. Itincorporates all of the ergonomically tuned comfort surfaces of the Centricseat with the added comfort of the SAS shock absorbing system. In roughseas and tight maneuvers, the side bolsters and SAS suspension help to keepthe boater centered in the seat.• Compact Turning Diameter • Concealed Hinge Patented pinch-proof hinge

molded into the shell.• Lock-Down detent secures seat in the down position at speeds up to 70 mph.

DIMENSIONS: Mid-Back: 22.80" H x 18.50" W x 20.50" L

Dimensions

Seat comes with 4-T Nuts installed.Seat back rest can be locked in downposition. Swivel not included.

CENTRIC SAS™ FULLY UPHOLSTERED SEATS

VENTURE™ FOLDING FISHING SEAT

ORDER NO. Mfr. No. Description107-12404 7012-004-4 Light Grey / Signal Blue Back & Seat Pads107-12114 7012-101-4 White / White Back & Seat Pads107-12144 7012-104-4 Light Grey / Red Back & Seat Pads107-12544 7012-504-4 Light Grey / Grey Back & Seat Pads

BOAT SEATS

609For more information see: www.attwoodmarine.com

ORDER NO. Mfr. No. Colour099-98361 98361-2 Tan/Beige099-98362 98362-2 Grey/Smoke099-98363 98363-2 Blue/White099-98365 98365-2 Red/White

Beige / Off-WhiteORDER NO. 099-98403

Blue / Off-WhiteORDER NO. 099-98402

Off-WhiteORDER NO. 099-98401

Cutaway Bolster UpOrder No. 099-98402

Off-WhiteORDER NO. 099-98421

Blue / WhiteORDER NO. 099-98423

Beige / WhiteORDER NO. 099-98425

Saltwater WhiteORDER NO. 099-98427

Bolster Up

DIMENSIONS Mid-Back - Height: 23.87" Width: 24.80" High Back - Height: 27.89" Width: 24.80"

DIMENSIONS Mid-Back - Height: 22.80" Width: 18.5" - Length: 20.5" High Back - Height: 25.3" - Width: 18.5" - Length: 20.5"

Avenir Sport contains all of the break-through features of the Avenir (SAS shock absorbing suspension system and integral flip-up bolster) butwith more compact, low profile, sporty styling. It’s ideal for smaller cockpits or any application in which size and boater comfort are important.Avenir Sport with Flip-up Bolster is ideal for applications where the boater needs the additional 7" of seat height for better visibility during slowspeed manoeuvring when the boat is off plane, making it difficult to see over the bow

DIMENSIONS Height: 21-7/8" Width: 26 5/8" Length: 24"

AVENIR™ SEATINGAvenir is the world's first bolster seat with the award winning, patented SAS shock absorbing system. These attractively patterned SASspring suspension seats are trimmed out with backrest upholstered onsert, for deep-tuck styling, and molded polyurethane foam withstapled-in place upholstery. The arm contour has a stylish curve to support the arms in a natural, comfortable position. The side cutawayprovides ventilation at the lower back for cool comfort. All upholstery is marine grade vinyl. Seats include corrosion-resistant T-nuts forattachment to seat pedestals.

• Seat shell and molded foam provide ergonomic comfort and spinal support• Flip-up bolster. Bolster down creates rounded edge at front of seat and exceeds ABYC H-31 Type A Driver requirements.

Detent holds bolster up at 102º angle with 7" height. Provides elevated seating for improved visibility when docking or manoeuvring.• Spring grid flexes with the coil springs and supports the seat foam. Continually adjusts for circulation and comfort.• Quad spring suspension provides comfort and 3" travel for shock absorption. Prevents rider from "bottoming out".• Recessed bottom angle and rounded corners minimize the bottom "footprint". Allows seat to swivel in confined spaces.• No exposed hinges. No ugly brackets or fasteners to colour-match, pinch or abrade.

CENTRIC CONTOUR SEATINGCentric Contour is the perfect solution for value-driven boat interiors... and boater’s who want attractive styling and comfort.These high -back Centric seats are trimmed out with deep-tuck upholstered backrests, and new upholstery patterns. All upholsteryis marine grade vinyl. Seats include corrosion-resistant T-nuts for attachment to seat pedestals.

AVENIR™ FULLY UPHOLSTERED SEATS WITH FLIP-UP BOLSTERS

AVENIR™ SPORT

CENTRIC CONTOUR UPHOLSTERED SEATS

BOAT SEATS

610

HI-LO 3 PIECE PACKAGEThis is a unique 2-position, 3-part system that allows full uprightseating while fishing.Package Includes:• 11" standard post, satin finish• Hi-Lo swivel, e-coat finish• 7" x 7" standard base, satin finish• Below the deck mount, requires a 2-1/2" hole in deck• Depth of cup: 3

ORDER NO.161-54310Mfr. No. 1615431

REMOVABLE PEDESTAL SYSTEMS

STANDARD OFFSET POST• 1-3/4" diameter 13" post• Mild steel with E-Coat pin• Provides a full 5" of offset extension• Use with any Kingpin™ seat mount (Sold Separately)• Use with any standard Kingpin™ bases (Sold Separately)

ORDER NO. 161-04131Mfr. No. 1610413-OSS

7"X 7" SWIVEL SEAT MOUNT• Unintentional detachment, to comply with ABYC• 7" x 7" swivel seat mount, with spring• E-Coat finish• Rotates 360°• Use with any KingPin™ post (Sold Separately)

ORDER NO. 161-52010Mfr. No. 1615201-EC

MANUAL ADJUSTABLE PEDESTAL

Adjustable for Control and Comfort• Adjusts from 22" to 31"• Posi-Lock lever secures post at desired height• Allows swivel to rotate 360°• Satin finish• Use with any KingPin™ seat mount (Sold Separately)• Use with any standard KingPin™ base (Sold Separately)

ORDER NO. 161-34020Mfr. No. 1613402-S

STANDARD FIXEDHEIGHT POSTS• Hefty 1-3/4″ diameter post andreinforcement ring• Satin finish• Use with any KingPin™ seat mount oroffset bracket• Use with any standard KingPin™ base

ORDER NO. Mfr. No. Post Length161-04110 1610411-S 11"161-04130 1610413-S 13"161-04150 1610415-S 15"161-04250 1610425-S 25"

For more information see: www.springfieldgrp.com

KINGPIN™ SERIES

POWER-RISE ADJUSTABLE PEDESTAL

Adjustable for Control and Comfort• Adjust height to be used as seat or leaning post• Rotates 360°• Satin finish• Use with any standard KingPin™ base (Sold Separately)

B

B

BB

B

Cutaway view of Kingpin™pedestal post in base

ORDER NO. Mfr. No. Adjustable Height161-24010 1612401-S 16" to 22-3/4"161-24020 1612402-S 22-1/2" to 29-1/2"

B

CLASSIFICATIONS

See Page 619for Class descriptions

B

611

DECK RINGThis above-deck ring strengthens themounting of 9'' dia. pedestal bases.Quality cast.ORDER NO. 158-00070

POWDER-COAT BASEExceptional value! Better corrosion resistance than stainless steel atless cost!BLACKSIZE: 7" x 7"ORDER NO. 162-00180 Mfr. No. 1620018

ALUMINUM DECK BASEExceptional value! Strong yet light aluminum basesoffer choice of scratch-proof textured finish orbrushed satin.BRUSHED SATIN FINISHSIZE: 7" x 7"ORDER NO. 162-00160 Mfr. No. 1620016

No. 1620001 No. 1620003 No. 1620004

SIZE Mfr. No. ORDER NO.(A) 7'' x 7'' BASE 1620001 162-00010(B) 7'' x 7'' BASEOFFSET SOCKET 1620003 162-00030

(C) 6'' x 8'' BASE 1620004 162-00040

SPLIT UNDER-DECK RING (8" AND 9")Easy-to-install ring provides solid below-deck mounting support for 8''to 9'' pedestal bases. Two-piece ring requires 4-1/2'' hole in the deck.Cast aluminum. Recommended for taller pedestals thatare used in rough water application.

ORDER NO. 158-00030 - 8''ORDER NO. 158-00040 - 9''

(A) (B) (C)

DECK BASES

For more information see: www.springfieldgroup.com

MOUNTING PLATES

STAINLESS STEEL DECK BASES

PEDESTALMOUNTING PLATEOne-piece mounting plate boltsflush to deck. Ideal for situationswhere under deck access isrestricted. Works on 9'' bases.Anodized aluminum.ORDER NO. 158-00060

SEAT SWIVEL• 360° ball bearing seat swivel.• E-coated for rust and corrosion resistance.• 6-7/8'' square; 4-hole pattern

JON BOAT SEAT CLAMP• Fits a wider variety of boat seats• Clamp adjusts from 8” to 20-1/2”• Includes 7” x 7” swivel

ORDER NO. Mfr. No.110-00070 1100007

ORDER NO. Mfr. No.110-04010 1104010

REMOVABLE 7" X 7"SEAT BRACKET• E-coated for rust and corrosion resistance.

ORDER NO. Mfr. No.110-00150 1100015

BOAT SEAT ACCESSORIES

612


Adjustable for Control & Comfort• Adjusts from 13-1/2" – 20"• Rotates 360°• Use with any Taper-Lock™ base (Sold Separately)

2-Piece set includes:• Taper-Lock™ 13" polished post• Trac-Lock swivel (locking or non-locking)• Use with any Taper-Lock™ base (not included)

Post with Seat Mount• Adjusts from 22-1/2" to 29-1/2"• 2" post• Brite Dip finish• Use with any Taper-Lock™ base (Sold Separately)

POWER-RISE ADJUSTABLE PEDESTAL

TAPER-LOCK™ SERIES

B

B

Adjustable and Secure for Control and Comfort• Adjusts from 13-1/2" to 20"• 2-3/8" post• Rotates 360°• Cam prevents free spinning while trailering• Use with any Taper-Lock™ base (Sold Separately)

ORDER NO. 160-10021Mfr. No. 1601002-L

Order No.Non-Locking

Mfr. No.

APPost Dia.

Order No.Locking

Mfr. No.Post Dia

160-06350 1600635 2” N/A – –

160-06070 1600607 2-3/8” 160-06071 1600607-L 2-3/8”

ORDER NO. Mfr. No. Post Dia.

160-20110 1600201 2”

ORDER NO. Mfr. No. Post Dia.

160-20240 1602024 2”

ORDER NO. Mfr. No. Adjusts

160-38250 1603825 13” to 16”

160-38240 1603824 21” to 31”

B

13” PEDESTAL & SWIVEL PACKAGE

B

2-Piece set includes:• 2-3/8" manual adjustable post (with posi-lock system)• Trac-Lock non-locking swivel (Order No. 110-00310)• Use with any Taper-Lock™ base (Sold Separately)

POWER-RISE with LOCKING HANDLE 13" FIXED HEIGHT POST

• 13" Post• Use with 2-3/8" Trac-Lock, non-locking swivel (Order No. 110-00310)(Sold Separately)

• Use with any Taper-Lock™ base (Sold Separately)

ORDER NO. Mfr. No. Post Finish

160-06150 1600615 2” Anodized

160-06100 1600610 2-3/8” Polished

AP


160-20240

MANUAL ADJUSTABLE PEDESTAL with SEAT MOUNT

POWER-RISE STAND-UP POST & MOUNT

AD

613

PEDESTALS & ACCESSORIES


REMOVABLE PEDESTALS

TAPER-LOCK™ HI-LO PACKAGE

• Swivel adds 4" to height of post• E-Coat finish• Use with any taper-lock hi-lo post(Sold Separately)

ORDER NO. 160-02050Mfr. No. 16004205

ORDER NO. Mfr. No. Diameter Description160-04090 1600409 2-3/8" 9" Post, Polished Finish160-04140 1600414 2" 13.5" Post, Anodized Finish160-04060 1600406 2-3/8" 13" Post, Polished Finish

• Polished finish• Use with hi-lo seat mount, (Order No. 160-02050)(Sold Separately)

• Use with any Taper-Lock™ base (Sold Separately)

ECONOMY ADJUSTABLE PEDESTAL• 7" x 7" square base and seat mount• Rugged, all steel construction with E-Coat protection• Adjusts from 12" to 18" (In 2" Increments)• For use with standard boat seats

ORDER NO. 156-11070Mfr. No. 1561107

NON-REMOVABLE PEDESTAL

CLASSIFICATIONS


ADAP

This 2-position, 2-part system allows upright seating while fishing, or compactstorage and increased driver visibility while the boat is underway.

2-Piece set includes:• Taper-Lock™ Hi-Lo Polished 2 Post (Order No. 160-04140)• Taper-Lock™ Hi-Lo Swivel (Order No. 160-02050)• 16" from deck to top of swivel• Use with any Taper-Lock™ Base (Sold Separately)

(A)

Satin - No. 1600003 No. 1600005 No. 1600008 No. 1600010( 8" Hole Pattern)

(B) (C) (D)

ORDER NO. Mfr. No. Fig. Description160-00080 1600008 C 9” x 4.5” Double Flat,

Brushed Satin160-00100* 1600010 D 9” Surface Mount,

Brushed Satin*Does not require a hole in the deck

ORDER NO. Mfr. No. Fig. Description160-00030 1600003 A 9" Round, Brushed Satin160-00050 1600005 B 9" Flat, Brushed Satin

160-04140TAPER-LOCK™ HI-LO POST TAPER-LOCK™ HI-LO SWIVEL

TAPER-LOCK™ BASES

ORDER NO. 160-04270Mfr. No. 1600427

614


For more information see www.springfieldgrp.com

SWIVEL• E-Coat finish to resist corrosion• Use with any Spring-Lock post

ORDER NO. 164-02020Mfr. No. 1640202

9” Round Base• High-strength aluminum• Satin finish• Below the deck mount, requires a 4" hole in deck• Use with any Spring-Lock™ post (Sold Separately)

ORDER NO. 164-00020Mfr. No. 1640002

7” x 7” Square Base• Mild steel• Powder coat finish• Below the deck mount, requires a 4" hole in deck• Use with any Spring-Lock™ post (Sold Separately)

ORDER NO. 164-00070Mfr. No. 1640007

FIXED HEIGHT POSTS• Hefty 1-3/4" diameter stainless steel• Use with any Non-Locking Spring-Lock™ seat mount(Sold Separately)• Use with any Non-Locking Spring-Lock™ base (Sold Separately)

ORDER NO. Mfr. No. Post Length164-04040 1640404 13-1/2”164-04030 1640403 15-1/2”164-04250 1640425 25”

POWER RISEADJUSTABLESTAND-UP PEDESTAL

BB

STAINLESS STEELREMOVABLE PEDESTAL SYSTEM

SPRING-LOCK™ SERIES

NON-LOCKING BASES

POWER RISEADJUSTABLE PEDESTAL

Adjustable for Control & Comfort

• Air-Powered height adjustment• Adjusts from 13-1/2" to 20"• Rotates 360˚• Stainless steel post• Polished finish• Use with any Non-Locking Spring-Lock™ base

Power cylinder is protected by a stainless steel sleeve.

ORDER NO. 164-20050Mfr. No. 1642005

Post with Seat Mount

• Adjusts from 22-1/2" to 29-1/2"(unless noted)• Rotates 360˚• Stainless steel post• Polished finish• Use with any Non-Locking Spring-Lock™ base

Power cylinder is protected by a stainless steel sleeve.

ORDER NO. 164-20080Mfr. No. 1642008

CLASSIFICATIONS


ADAP

B B

B B

615

SNAP-LOCK™ 1.77" PRODUCTSLocked in Quality.

For high performance seating, all it takes is Swivl-Eze Snap-Lock pedestal systems.• All Snap-Lock components “Snap” together for safety • Sturdy bright anodized Aluminum posts

• E-Coated seat mounts • For quality, reliability and ease-of-use, it’s a lock.

LOCK’N-PIN™ 3/4" PIN PRODUCTSThe #1 Supplier Of 3/4” Pin Products

• Economical seating system • Proven Design • Products designed to “lock” together inaccordance with ABYC H31.6.1 • Engineered to PREVENT UNINTENTIONAL DETACHMENT.


For more information see: www.attwoodmarine.com

BASE PLATE

102-19000Seat Mount

102-67904Base Plate

ORDER NO. Mfr. No. ABYCCode **

InstalledHeight Description

102-19000 SP-19000 AN ** 2" Seat Mount, 3º Tilt, Black E-Coat Steel


Req. Dia.Mount Hole Description

102-67904 SP-67904 AO ** 2.5" Base Plate, 9" Round, Aluminum

SEAT MOUNT

FIXED HEIGHT POSTS

ORDER NO.Pin Type

Mfr. No.Pin Type

ABYCCode ** Description

102-29110 SP-29110 B ** 11" Clear Anodized Post

102-29130 SP-29130 B ** 13" Clear Anodized Post

LOCK’N-PIN™ 3/4" PIN FIXED HEIGHT POSTS

LOCK’N-PIN™ 3/4" PIN SEAT MOUNT

102-10020Seat Mount

102-67729Base Plate

Fixed Height Post

Pro PostAdjustableHeight,Pin Type


Req.Dia. Description

102-67729 67729 B ** 2.75" 7" x 7" Base Plate, Non-Threaded Nylon Bushing

102-67729-1 67729-T B ** 2.75" 7" x 7" Base Plate, Threaded Nylon Bushing


InstallHeight Description

102-10020 SP-1002 B ** 2" Seat Mount, 3º Tilt, with spring, Zinc Plated Steel

ORDER NO.Pin Type

Mfr. No.Pin Type

ORDER NO.Threaded

Mfr. No.Threaded


102-21140 SP-2114 102-21141 SP-2114-T B ** 11" Alum. / 1.50" Dia, Post - Brushed102-21340 SP-2134 102-21341 SP-2134-T B ** 13" Alum. / 1.50" Dia, Post - Brushed

NOTE:For Total Height,add installed height measurementof seat mounts to post height.Height is measuredfrom the boat deck.DEPTH REQUIRED BELOWDECK SURFACE:

Non-Threaded Base = 2.75"Threaded Base - 4.0"

LOCK’N-PIN™ 3/4" PIN BASE PLATES - ZINC PLATED STEEL

LOCK’N-PIN™ 3/4" PIN ADJUSTABLE HEIGHT PRO POSTS - MANUAL

FixedHeightPost,

Thrteaded

NOTE: For Total Height, add installed height measurement of seat mounts to post height.Height is measured from the boat deck.DEPTH REQUIRED BELOW DECK SURFACE: 3.5”

ABYC H31 Codes ** AO - Type A: Operator (Used at the helm / driver position)AN - Type A: Non-Operator (Not to be used at the helm / driver position)

B - Type B: (Not to be used at helm / driver position)

NOT Recommended to interchange with other manufacturers’ products

ORDER NO.Pin Type

Mfr. No.Pin Type

ORDER NO.Threaded

Mfr. No.Threaded


102-22440 SP-2244-ADJ 102-22441 SP-2244-ADJ-T B ** 25" - 31" Alum. / 1.50" Dia,

Post - Brushed

616

(2-3/8" only)

B

For more information see www.springfieldgrp.com

POWER-RISE AIR-RIDE PEDESTAL

Post with seat mount• High-strength aluminum• Adjusts from 13-1/4" to 17-1/4"• Trac-Lock locking Air-Ride swivel (Order No. 110-00311)• Fits any 2-3/8" Plug-In™ base (Sold Separately)

ORDER NO. Mfr. No. Description130-06010 1300601 Power-Rise Pedestal

ORDER NO. Mfr. No. Post Length130-07090 1300709-HL 9"130-07120 1300712-HL 12"130-07150 1300715-HL 15”

ORDER NO. Mfr. No. Description130-07510 1300751-1 Plug-In Base Only

HI-LO 3-PIECE PACKAGE

This is a unique 2-position, 3-part system that allows full upright seating whilefishing or remove the pedestal and insert the seat mount into the base forcompact storage.3-Piece set includes the following:

• Plug-In™ Hi-Lo swivel seat mount• Plug-In™ Hi-Lo post (see sizes below)• Plug-In™ 9" diameter base (Order No. 130-07510)

B

AD

MANUAL ADJUSTABLE PEDESTAL W/SEAT MOUNT

Adjustable for Control and Comfort• Adjustable pedestal• Can be locked in position to prevent rotating or unlocked to rotate freely• Provides safe, stable seating• Fits any 2-3/8″ Plug-In™ base (Sold Separately)

ORDER NO. Mfr No. Adjustable Height130-09010 1300901 14-3/4" – 21"130-09020 1300902 22-3/4" – 29-1/2"

ORDER NO. Mfr. No. Post Length130-04012 1304012-HL 12"130-04015 1304015-HL 15"

HI-LO POST

• High-strength aluminum post with anodized finish• Use Plug-In™ Hi-Lo swivel seat mount (Sold Separately)• Use with any 2-3/8" Plug-In™ Hi-Lo base (Sold Separately)

2-3/8” PEDESTAL BASES

9" Round Hi-Lo Base• 8" hole pattern• High-strength aluminum• Satin finish• Below the deck mount (Requires a 3-3/4" hole in deck)• Use with any 2-3/8" Hi-Lo post (Sold Separately)

B

PLUG-IN™ SERIES 2-3/8"


617

For more informationsee:www.attwoodmarine.com


Fixed HeightExtension Post *

102-38608 238608-1 AO ** 8” Height102-38609 238609-1 AO ** 9” Height102-38610 238610-1 AO ** 10” Height102-38611 238611-1 AO ** 11” Height102-38612 238612-1 AO ** 12” Height102-38613 238613-1 AO ** 13” Height102-38614 238614-1 AO ** 14” Height102-38615 238615-1 AO ** 15” Height102-38625 238625-1 AO ** 25” Height102-38630 238630-1 B ** 30” Height

FixedHeight

ExtensionPost

AdjustableHeight PowerPedestal

Fixed Height Bell Pedestal

238 SERIESPEDESTAL &

EXTENSION POSTS

238-SERIES SOCKET BASE


Req. Dia.Mounting Hole Description

102-38312 238312-1 AO ** 3” Aluminum, 9” Round

102-38322 238322-1 AO ** 3” Aluminum, 9” D-Shape

102-38333 238333-1 AO ** 3” Stainless Steel, Powder Coated,7” x 7”, Square,Centered Hole

102-38162 238162-1 AO ** Seat Mount, Plated Steel with Slider 3º, Right Handle

ORDER NO. Mfr. No. ABYCCode ** Description Degree of Tilt

102-38141 238141-1 AO ** Seat Mount, 2-3/8” Stainless Steel 3º, Left Handle

102-38142 238142-1 AO ** Seat Mount, 2-3/8” Stainless Steel 3º, Right Handle

102-38143 238143-1 AO ** Seat Mount, 2-3/8” Stainless Steel 3º, Forward Handle

102-38152 238152-7 AO ** Seat Mount, 2-3/8” Plated Steel 3º, Right Handle

102-38153 238153-7 AO ** Seat Mount, 2-3/8” Plated Steel 3º, Forward Handle

Seat Mount w/o Slider 102-38141

Seat Mount w/ Slider 102-38162

102-38322102-38312


Fixed HeightBell Pedestal *

102-38908 238908SM4 AO ** 8” Height102-38912 238912SM4 AO ** 12” Height102-38915 238915SM4 AO ** 15” Height


Adjustable HeightPower Pedestal *

102-38512 238512-4 AO ** 13” - 16-1/2”102-38522 238522-4 AO ** 19-1/2” - 23”102-38542 238542-1 B ** 32-1/2” - 36”

238 SERIES SEAT MOUNT WITHOUT SLIDER

238 SERIES SEAT MOUNT WITH ALUMINUM SLIDER

FIXED HEIGHT BELL PEDESTALS*(Height measured from deck to top of seat mount)

ADJUSTABLE HEIGHT POWER PEDESTAL*(Height measured from deck to top of seat mount)

ABYC H31 Codes **

AO - Type A: Operator(Used at the helm / driver position)

AN - Type A: Non-Operator(Not to be used at helm / driver position)

B - Type B:(Not to be used at helm / driver position)

238 SERIES PRODUCTSCorrosion Resistant • Smooth Movement Without Wobble• Design Simplicity and Style

• Tubes are hard-anodized aluminum • Springs are stainless steel• Bases are bead-blasted and clear-coated• E-Coated seat mounts

• For quality, reliability and ease-of-use, it’s a lock.• Not recommended to interchange with other manufacturers’ products

FIXED HEIGHT EXTENSION POST*(Height measured from deck to top of seat mount)

* Height is measured from deck to top of seat mount

NOT Recommended to interchange with other manufacturers’ products


618

NON-REMOVABLE PEDESTALS

Package includes:• 2-3/8" post with 9" round base, anodized finish• Adjusts from 12" to 15"• Air-Powered Height Adjustment• Includes locking Trac-Lock swivel

• 2-3/8" adjustable post with 9" base• Adjusts in 1" increments, 12-1/2" to 15-1/2"• Anodized post and satin base• Includes locking Trac-Lock swivel

ORDER NO. 125-30320Mfr. No. 1253032-l

• Use as a seat or a leaning post• Upright for enhanced lower back support• Angled to take the pressure off your legs• Rotates with your changing casting angles• Corrosion resistant power rise pedestal with up/down lever• Height adjustment from 28-1/2" to 35-1/2"

104-103520104-103510

• Adjustable Post/10" Base/Seat mount• Adjusts from 13" to 17" (Easy grip handles)• Rotates 360°• Fits standard boat seats• Corrosion-resistant powder-coat finish

ORDER NO. 144-02480Mfr. No. 1440248

ORDER NO. Mfr. No. Description104-03500 104350-SL Springlock Pro Seat, Charcoal104-03510 104351-SL Springlock Proseat, Mica104-03520 104352-PIC Plug-in Univ. Adj. Ped. 28-1/2" to 35-1/2", Charcoal104-03530 104353-TLC Taper-Lock Univ. Adj. Ped. 28-1/2" to 35-1/2", Charcoal104-03530-1 104353-TLM Taper-Lock Univ. Adj. Ped. 28-1/2" to 35-1/2", Mica104-03550 104355-KPC Kingpin Univ. Adj. Ped. 28-1/2" to 35-1/2", Charcoal104-03550-1 104355-KPM Kingpin Univ. Adj. Ped. 28-1/2" to 35-1/2", Mica

Package includes:• 2-3/8" post with 9" round base, anodized finish• Air-powered height adjustment from 14" to 20"• Includes locking Trac-Lock swivel

Package includes:• 2-7/8" post, anodized finish• 9" satin base• Locking Trac-Lock swivel (Order No. 410-00211)

CONTROL POST- ADJUSTABLECUSTOM COMFORT SEATING SYSTEM & PRO FISHING STATION

EXPLORER POSI-LOC ADJUSTABLE SPRINGFIELD BELLE ADJUSTABLE

REGULAR MAINSTAY SET

LOW PROFILE MAINSTAY SET

EXPLORER PEDESTAL SET AD

AD


MANUAL ADJUSTABLE PEDESTALS

PEDESTAL SETS

ORDER NO. ORDER NO.Non-Locking Mfr. No. Post Length Locking Mfr. No. Post Length125-05350 1250535 12" 125-05351 1250535-L 12"125-05400 1250540 18" 125-05401 1250540-L 18"

ORDER NO. 125-01001Mfr. No. 1250100-L

ORDER NO. 125-02001Mfr. No. 1250200-L

125-05350

125-01001 125-02001

AD

CLASSIFICATIONS

ADSee Page 619

for Class descriptions

AD

619

CLASSIFICATIONS

A Few Notes about ABYC and H-31…The American Boat and Yacht Council has recommended seatingstandards for the marine industry. These standards help classifypedestal applications into two separate categories.These are:CLASS ASeat designed for occupancy while the boat is under way at anyspeed.CLASS BSeat designed for occupancy only at boat speeds not exceedingfive miles per hour.

Within each of these classifications all pedestals must pass aseries of tests, (horizontal and vertical impacts, torque andstatic load test). There are also two types of Class A seats.Those are:CLASS A PASSENGERSeat mount must resist 30 foot pounds of torque.

CLASS A DRIVERSeat Mount must incorporate a “mechanical interference lock”and resist 150 foot pounds of torque.

AP

AD

SLIDES & SWIVELS

• Large 7-1/4" x 13" x 2" high, 0-degree platform• High-strength aluminum• Travels 4-1/2" forward and backward

The Trac-Lock is one of the most popular swivels available. Functional,dependable and easy to use. Used by itself or combined with any of theTrac-Lock slides, the Trac-Lock swivel is a great value.

• High-strength aluminum with powder coated finish• 2-3/8" or 2-7/8" post mount (see chart) with bushing for snug fit• Rotates 360°• Available as locking or non-Locking (see chart)• Adds 3/4" height to the pedestal

Trac-Lock slide units combine the Trac-Lock swivel and all its greatfeatures with the sturdy function and handsome details of the Trac-Lockslides to offer a wide selection of versatile, full-function slide/swivel unitsthat are easy to use.

• Trac-Lock swivel• Available as either locking or non-locking (see chart)• Centrally located locking handles• Large 7-1/4" x 13" seat mounting platform• Travels 5-1/4" forward and backward on self-lubricating pads• Adds 1-1/4" height to the pedestal

ORDER NO. Mfr. No. Post Dia. Description/Class110-05310 1100531-1 2-3/8" Non-Locking110-05311 1100531-L1 2-3/8" Locking110-05210 1100521-1 2-7/8" Non-Locking110-05211 1100521-L1 2-7/8" Locking

ORDER NO. Mfr. No. Post Dia. Description/Class110-00310 1100031-1 2-3/8" Non-Locking110-00311 1100031-L1 2-3/8" Locking410-00210 1100021-1 2-7/8" Non-Locking410-00211 1100021-L1 2-7/8" Locking

SLIDES

ORDER NO. 110-03000Mfr. No. 1100300

AD

AP

AD

AP

AD

AP

AD

AP

AD

TRAC-LOCK SERIES

SWIVELS

UNIVERSAL TRAC-LOCK SLIDE

For more information see: www.springfieldgroup.com

620


Built to Handle the Big Water!These heavy duty 2-7/8" posts and 9" diameter machined bases are engineered for strength

and safety in harsh off-shore conditions.NOT RECOMMENDED TO INTERCHANGE WITH OTHER MANUFACTURERS’ PRODUCTS

Seat Mount

Seat Mountwith Locking Handle

SEAT MOUNTORDER NO. Mfr. No. ABYC Code** Installed height Description

818-64100 818641 AO ** 5/8" Seat Mount, 3º Tilt, Alum.,w/ Friction Control

NOTE:For Total Height, add installed height measurement of seat mounts to post height.Height is measured from the boat deck.

SEAT MOUNT WITH SLIDERORDER NO. Mfr. No. ABYC Code** Description828-66100 828661 AO ** Seat Mount, Aluminum, w/ Friction Control,

3º Tilt, w/ Locking Handle

325 PEDESTAL SYSTEM PINNACLE SERIESStrong, Stable & Corrosion Resistant• Features a 3-1/4" anodized tube diameter for both stability and strength• Tube and base are anodized cast aluminum for corrosion protection.• To increase support, the seat mount slide is wider and can accommodate larger seats, up to 24"• Offers 6" of forward/aft travel• The X-glide design in the slide extrusion, increases the stability with weight

Easy to reach handlesThe slide and swivel are both activated by cables that can be mounted under the seat at the front or side foreasy access. This is convenient, comfortable, and gives the user a satisfying sense of control.Just pull a contoured handle to unlock the slide or swivel mechanism, release to lock in current position.

ORDER NO. Mfr. No. ABYC Code** Description889-12010 8891201B AO ** 12" Height, Anodized Base and Tube, Black Trim Ring

NOTE:All fixed height posts, without seat mounts,come with forward positive locking hole punchedin the top of post.They can be used for AN or AO applications.

For more information see: www.attwoodmarine.com

Fixed HeightBell Pedestal

SEASPORT 2-7⁄8" FIXED HEIGHT BELL PEDESTALS• Engineered for strength and safety in harsh off-shore conditions• Satin Finish Post• Satin 9" Round Powder coated Machine Base• Type “A” Operator Models

ORDER NO. Mfr. No. Description860-60100TP 860601-TP 6" Height Post- Replaces 860601-TA860-80100TP 860801-TP 8" Height Post – Replaces 860801-TA861-00100TP 861001-TP 10" Height Post- Replaces 861001-TA861-55100TP 861551-TP 15.5" Height Post – Replaces 861551-TA861-75100TP 861751-TP 17.5" Height Post – Replaces 861751-TA

Fixed Height Bell Pedestal

ABYC H31 Codes ** AO - Type A: Operator (Used at the helm / driver position)AN - Type A: Non-Operator (Not to be used at the helm / driver position)

B - Type B: (Not to be used at helm / driver position)

SEASPORT 2-7/8” PRODUCTS

SEASPORT MEANS STRENGTH, SAFETY, AND USABILITY• Ergonomic positive-locking handles with stainless steel components• PowerLock™ Multi-Action handle controls both swiveling and height adjustment. No more wondering which handle does what• TwinGlide™ Bushing ensures smooth operation and maximum stability at any height position• EZ-Lock™ CAM-Action makes seat removal simple. When engaged, seat mount is posi-locked to the post and swivels freely

621

SEAT ACCESSORIES & REPLACEMENT PARTS

D

E

CA

B

A B

C

HANDLE ASSEMBLY REPLACEMENT PARTS

F

D

A


TRAC-LOCK SERVICE PARTS

A B

C

Fig. ORDER NO. DescriptionA. 217-10000 2-3/8” dia. BushingB. 217-10010 2-7/8” dia. BushingC. 217-10060 Slide Pads

Fig. ORDER NO. DescriptionA. 210-00580 Seat Mount SpringB. 210-00550 Deck Base Bushing (Plastic)

Fig. ORDER NO. DescriptionA. 210-00300 Power Pedestal HandleB. 210-00690 Mainstay Seat AssemblyC. 210-00280 2-7/8" Adjust. Handle Assy.D. 210-00340 2-3/8" Adjust. Handle Assy.E. 210-00330 Seat Mt. Handle Assy.Not shown 210-00710 Mainstay handleNot shown 210-00950 Unilock handle w/pinNot shown 210-00980 Unilock handle 2-7/8" pinNot shown 210-00990 Unilock handle 2-3/8" pin

Fig. ORDER NO. DescriptionA. 217-10030 Seat Swivel BushingB. 217-10040 Post Bushing (Not shown)C. 210-00320 KingPinTM AdapterD. 217-10350 2" Hi-Lo BushingE. 217-10320 2-3/8" Hi-Lo BushingF. 210-00310 Power Pedestal Bearing Repair Kit

Fig. ORDER NO. DescriptionA. 210-00100 Seat Mount BushingB. 210-00110 Replacement Locking LatchC. 210-00120 End CapD. 210-00310 Power Pedestal Bearing Repair Kit

TAPER-LOCKTM REPLACEMENT PARTS

B

A

B

D

E

C

REPLACEMENT PARTS

SPRING-LOCKTM REPLACEMENT PARTS

KINGPINTM REPLACEMENT PARTS FOR SEAT MOUNT AND DECK BASES

622For more information see: www.garelick.com

ORDER NO. Mfr. No.459-75007 75007

ORDER NO. Mfr. No.459-75020 75020

• Accepts standard boat seats, fits tank or bench tops• Durable – All metal construction• Quick mounting & dismounting,includes 360° swivel• Vinyl covered clamps

• Rotates 360° Fits most standard seat hole patterns• Self-lubricated, non-corrosive poly swivel bearings• Plated steel to resist corrosion

• Heavy duty for offshore market• 304 Stainless steel with stainless center rivet• Rotates 360˚ – Fits most standard hole patterns• Self lubricated non-corrosive poly swivel bearings• 7" x 7" (18 x 18 cm)

75007 – 8" to 18" Adjustable

Standard75016

Removable75019

UNIVERSAL BOAT SEAT SWIVELS ADJUSTABLE SEAT SWIVEL CLAMP

STAINLESS STEEL BOAT SEAT SWIVEL

TOGGLER BRAND STAINLESS STEEL TOGGLE BOLT ANCHORS

ORDER NO. Mfr. No. Description459-75016 75016 "Standard" - 6" x 6" (15 x 15 cm)459-75019 75019 "Removable" - Quick release mechanism

allows seat to slide out thru plastic tracksmounted to boat

FOR USE WITH ANY GARELICK OR BELL TYPE PEDESTAL SEAT BASE

• Positively secures seats and table bases to decks or any accessory to cabin walls.• Made of 304 Stainless Steel• Saves time and labor – Provides added strength• For deck or cabin thickness from 3/8" to 3-5/8" (1-9cm), requires ½" (13mm) holes

Pedestal Mounting Kit1/4" - 20 size anchors only for mounting any model Pedestal Seat Base.Poly bag and header card.

ORDER NO. Mfr. No. Description459-21022 21022 1 pair459-21026 21026 6 pack


623

ORDER NO. Mfr. No.100-14080 1001408-L

ORDER NO. Mfr. No.100-02050 1000205-L

This all-weather chair with comfortable arm rests comes with a9" heavy-duty die-cast aluminum base. The swivel rotates360-degrees and the easy-grip handle can lock from right or left.Additional features include:• Turning radius of 12"• Recessed bottom. (Strengthens chair)• Width: 19.5", Depth: 17.25", Height: 18"• Slotted back for hand grip• Anodized 15" post, 2-7/8" diameter• Adjustable 0° or 3° angled seat mount• Cushions available

This popular chair package provides the boater withthe stability needed to land the "big ones". Consider theTrac-Lock chair slide with 5" fore and aft travel, the 9"heavy-duty cast aluminum anodized base, the 360° lockingswivel and much more:• Turning radius of 12-3/4"• Width: 20.5", Depth: 17", Height: 20"• Anodized 17" post, 2-7/8" diameter• Adjustable 0° to 3° angled seat mount• Easy grip handle can lock from left to right• Plush foam padding• Non-seamed cushion that won't trap water• Textilene Mesh Underliners (Permits cushion to dry)• Marine grade vinyl

This well made, well matched unit starts with our Bluewaterchair shell for any size boater. Then we pair it with ourMainstay Power Pedestal that not only provides instant heightadjustment but also acts as a shock absorbing pedestal.Cushions made with marine grade vinyl, plush foam padding;Textilene mesh underliners permit cushion to dry. Unit alsoincludes Uni-Lock chair slide. Anodized for saltwater use.Includes Mainstay Pedestal with 14-1/2" to 19-1/2" adjustment.

Specifications:Base: 9" ; 8" hole pattern.Post (lower) 2-7/8"; (upper) 2-3/8" diameterSeat Dimensions: 18"W x 20"D x 19.5"H

• All weather chair with arm rests• Height adjusts 13-1/2" - 16-3/4"• 2-3/8" Trac-Lock Slide/Swivel (non-locking)• Marine Grade Vinyl• Adjustable polished base and post• Comes with CushionsSeat Dimensions: 19.5"W x 16"D x 17.75"H

ORDER NO. Mfr. No.110-01204 1001204-L

ORDER NO. Mfr. No.106-01000 1060100


CLASS ASeat designed for occupancywhile the boat is underwayat any speed.

CLASS BSeat designed foroccupancy only at boatspeed not exceeding fivemiles per hour

CLASS APASSENGERSeat mount must resist30 foot pounds of torque

CLASS ADRIVERSeat mount mustincorporate a "mechanicalinterference lock" andresist 150 pounds of torque

THE ADMIRAL

NEWPORT CHAIR PACKAGE

THE COMMODORE

DELUXE BLUEWATER PACKAGE

AD

AD

A

B

AP

AD

B

AD

YACHT CHAIR PACKAGES

624

BOAT SEATS

490 ULTIMATE SPORTFISHING / HELM CHAIR & PEDESTALCLASSIC ARM CHAIR COMFORT• All weather white seat support frame with ladder back• Ideal at fly bridge, helm station, or fishing• High density, white polyethylene seat and back, thick, removablewhite cushions snap to frame, thru-bolted hardware; tough anodized aluminumextrusions, stainless steel fasteners

SPECIFICATIONSSeat with 15” (38 cm) high anodized base.Width: 26.5” (97 cm), Depth: 17.5” (44 cm), Height: 20” (51 cm)ORDER NO. Mfr. No. Description459-48490 48490 Ultimate sportfishing helm chair w/ pedestal - White

400 ROTO MOLDED SEATSEAT WITH CUSHIONS• Compact dimensions, beautiful styling, makes this seat perfect for center consoleor dual seat applications• Made for easy maintenance• Rotationally molded of tough UV resistant white polyethylene, marine grade white quilted vinylcovers, snap on removable cushions, tee-nut bottom inserts. Anodized support rails make seatcompatible with most pedestals, swivel and fore & aft seat slides.

SPECIFICATIONSSeat with cushions - Width 20" (51 cm), Depth, 23" (58 cm), Height: 19" (48 cm)ORDER NO. Mfr. No. Description459-48400 48400-02 400 Molded seat w/ cushions - White

406 VALUE SEAT/PEDESTAL PACKAGE

ADD COMFORT AND STYLE TO YOURPONTOON OR RUNABOUT• Deep bucket styling, updates many pilot seat applications• Sized to match the scale and style of pontoons and runabouts• Roto-cast shell frame, marine grade vinyl, firm resilient foam

SPECIFICATIONSWidth 23.5” (60 cm), Depth 22.5” (57 cm), Height 19” (48 cm)ORDER NO. Mfr. No. Description459-49000 49000-1 Contour Captain’s chair,

White with grey trim

For more information see www.garelick.com

490 CONTOUR CAPTAINS CHAIR

COMPLETE VALUE CHAIR PACKAGE• Compact design makes it ideal for most applications• Affordable upgrade or replacement• Made for easy maintenance• Rotationally molded of tough UV resistant white polyethylene• Marine grade white vinyl, snap on removable cushions• Anodized aluminum pedestal base, 360˚ locking aluminum swivel casting,9" (23 cm) diameter support base

SPECIFICATIONSSeat with cushions - Width 20" (51 cm), Depth, 23" (58 cm), Height: 19" (48 cm)ORDER NO. Mfr. No. Description459-48406 48406-02 Value Chair Package - White

625

BOAT SEATS/FOOT RESTS

For more information see: www.garelick.com

• All weather white seat support frame- Classic arm chair comfort and ladder back design backrest

• Made for easy maintenance

SPECIFICATIONSHigh density, white polyethylene seat and back, thick, removable white cushions snap toframe, thru-bolted hardware; tough anodized aluminum extrusions, stainless steel fasteners.

420 COMPACT ROTO MOLDED SEATMOLDED-IN CONTOUR STYLING FEATURES

• Perfect for any boating activity• Ideal for center console or fish boat replacement seating• Compact Ergonomic Design helps give great comfort and support with or without cushions• Dual Grab Handles provide convenient place to hold on in rough water• Front waterfall taper edges give added thigh comfort• Natural center drain eliminates water

SPECIFICATIONSRotationally molded of tough UV resistant white polyethylene,marine grade waterproof molded vinyl,snap-on removable cushions, tee-nut bottom inserts.

Colour: WhiteWidth: 26.5" (67 cm)Depth: 17.5" (44 cm)Height: 20" (51 cm)

Colour: WhiteWidth: 17.5" (44 cm)Depth: 18.5" (47cm)Height: 17" (43 cm)

450 ULTIMATE POLYMER SEAT

OPTIONAL REINFORCEMENT PLATE• For use on roto-cast seats such as this when a fore and aft seat slide is not used.Accepts 99023 and 99235 swivels.

SPECIFICATIONS13” x 7.875” x 3/16” (33 x 20 x 64 cm) thick aluminum plate,mounting hole pattern 12.5” x 5” (32 x 13 cm)

ORDER NO. Mfr. No. Description459-75004 75004 Aluminum Casting

ORDER NO. Mfr. No. Description459-48420 48420 Seat with cushions only

ORDER NO. Mfr. No. Description459-48450 48450 Seat only

ADJUSTABLE FOOT REST• Modern Styling – 15" width.• Provides added comfort for multiple users at helm.• 4 positions provide 5" of vertical height adjustment.• Angled 18 degrees down for more comfort when resting on stepping surface• Traction grooved step surface with teak inserts.• Rounded corner design helps eliminate scraping ankles.

Heavy duty wrap around aluminum extrusion with brushed anodized aluminumfinish and teak treads.

SPECIFICATIONS7.5" H x 15" W x 8.25" D (19 x 38 x 21 cm)

ORDER NO. Mfr. No.459-27516 27516

ORDER NO. Mfr. No. Description459-99070 99070 Optional re-inforced plate

SWIVEL STANCHION FOOT RESTS• Eliminates dangling feet – Adds comfort at helm• Aluminum casting fits all fixed height 2-7/8" dia. stanchion• Traction grooved stepping surface• Fits all 2-7/8" Garelick / EEz-In seat bases• 14" (35cm) Wide, 11.3" (28cm) Deep

UP DOWN

626

SWIVEL MOUNT TOP360° Positive Lock Swivel Spider Mount AnodizedAluminum Finish• 4 prong spider swivels 360° and locks positively• Fits all Garelick 2-7/8" (7cm) diameter stanchionpedestal seat bases• High tensile aluminum and all stainless hardware• Anodized aluminum finishORDER NO. 459-99023 Mfr. No. 99023

PEDESTAL OPTIONSADJUSTABLE HEIGHT STANDARD FRICTION LOCK• Seat raises or lowers, locks at desired height• 2-7/8" (7cm) diameter stanchion tube, 9" (23cm)diameter base plate• Anodized protective finish helps prevent saltwatercorrosion and weathering

2.875" PEDESTAL DIAMETERSMOOTH STANCHION SERIES SEAT HARDWARE


MILLENIUM SERIES

SEAT SLIDE SYSTEM360° Positive Lock Swivel Spider Mount w/Black E-coat Finish• Fits all smooth 2-7/8” diameter fixed height stanchion pedestal bases• Smooth positive lock action slide – convenient spring loaded lock andergonomic release lever – Wobble Free when locked• Internal socket bearing engages for positive gear lock in 15° increments• Spring loaded positive quick auto lock engages immediately• Positive stop slide lock seat slide cam

FIXED OVERAL HEIGHT• Compatible with Garelick hardware• Provides solid base of support for a variety ofseat hardware• Accepts Garelick fore and aft seat slides and 360° swivel spidercombinations• 2-7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm) diameter6 hole base plate

Specifications:Accepts Seat Slides: 459-22000, 459-75080, 459-75081, 459-75083Accepts Swivels: 459-99023, 459-99036

SEAT SLIDE SYSTEMPositive Lock Slider & Spider Combination Left Hand Lever, Silver Powder Coat Finish• Low profile design allows 360° of rotation and 6" of smooth, wobble-free foreand aft travel• Heavy duty anodized aluminum slide plate has standard 5"x12" hole pattern toaccommodate standard seat mounting holes• Positive Lock Spider – rotates 360°, internal cup engages in 10° increments forpositive stop lock (Secondary twist control offers variable drag adj. and can betightened to lock in place)• Internal Delrin cup provides smooth, gall-free operation.• Available in either left- or right-hand operation• Meets ABYC-H31, Type A Standards & Garelick performance standards• Silver powder coated finish• Includes retaining hardware (99302)SLIDE: High tensile aluminum profile extrusion 13.75" x 8" (35cm x 20cm) plate,mounting hole pattern 5" x 12" (13cm x 30cm), Fore and Aft travel 6" (15cm).SWIVEL: High tensile aluminum 2-7/8" (7cm) diameter, plastic internal cup.All stainless hardware.ORDER NO. 459-22000 Mfr. No. 22000

SWIVEL SEAT MOUNT TOP360° Positive Lock Swivel Spider Mount Silver Powder Coat Finish• Low profile design allows 360° of rotation• Heavy duty anodized aluminum slide plate has standard 5"x12"hole pattern to accommodate standard seat mounting holes• 360° rotation is regulated by dual locking devices - lift thepositive lock lever to rotate. Drop the lever to lock in place in10° increments. Secondary twist control offers variable dragadjustment and can be tightened down to lock in place.• Internal Delrin Bearing Cup provides smooth, gall-free operation• Silver powder coated finish• Meets ABYC-H31, Type A Standards & Garelickperformance standardsORDER NO. 459-99036 Mfr. No. 99036

ORDER NO. Mfr. No. Adjustable Height459-75431 75431 9" (23 cm)459-75430 75430 12" (30 cm)459-75415 75415 15" (38 cm)459-75432 75432 18" (46 cm)459-75433 75433 24" (61 cm)459-75434 75434 30" (76 cm)

STANDARD SERIES

• Meets ABYC-H31, Type A Standards & Garelick performance standards• High tensile aluminum, co-polymer internal socket bearing• Includes retaining hardware (99302)• Adds 1" (2.54cm) to Pedestal heightSWIVEL: High tensile aluminum 2-7/8" (7cm) diameter, plastic internalcup. All stainless hardware.*When seated right hand operates slide lever.ORDER NO. 459-23021Mfr. No. 23000-21

ORDER NO. Mfr. No. Adjustable Height459-75436 75436 12" - 17" (30 - 43 cm)459-75437 75437 18" - 23" (46 - 58 cm)

LOW PROFILE PEDESTAL• One piece casting for mounting seats as low as possible (4.75" Overall Height)• Compatible with Garelick Hardware• Provides solid base of support for a variety of seat hardware• 2-7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm) diameter 6 hole base plate

Specifications:Accepts Seat Slides: 459-22000, 459-75080,459-75081, 459-75083Accepts Swivels: 459-99023, 459-99036ORDER NO. 459-75404 Mfr. No. 75404

EVOLUTION SERIES

STANDARD SERIES – SEAT SLIDE AND SWIVELORDER NO. 459-75083 Mfr. No. 75083 See Pages 828 & 830

459-99036459-22000

PEDESTAL SYSTEMS

627

SWIVEL SEAT MOUNT TOP360° Positive Lock Swivel Spider Mount Silver Powder Coat Finish• Low profile design allows 360° of rotation• 360° rotation is regulated by dual locking devices - lift the positivelock lever to rotate. Drop the lever to lock in place in 10°increments. Secondary twist control offers variable dragadjustment and can be tightened down to lock in place.• Internal Delrin Bearing Cup provides smooth, gall-free operation• Silver powder coated finish• Meets ABYC-H31, Type A Standards & Garelick performancestandards

ORDER NO. 459-99026 Mfr. No. 99026

ADJUSTABLE HEIGHT STANDARD FRICTION LOCK• Seat raises or lowers, locks at desired height• 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate• Anodized protective finish helps prevent saltwater corrosion and weathering.• 2-7/8" (7cm) diameter ribbed stanchion tube,9.25" (23cm) diameter 6 hole base plate

FIXED OVERALL HEIGHT• Compatible with Garelick hardware• Provides solid base of support for a variety of seat hardware• Accepts Garelick fore and aft seat slides and 360° swivelspider combinations• Accepts Seat Slides : 459-22000, 459-75080, 459-75081, 459-75083• Accepts Spiders : 459-99023,459-99036• 2-7/8" (7cm) diameter smooth stanchion tube, 9.25" (23cm)diameter 6 hole base plate

SEAT SLIDE AND SWIVEL• Provides smooth fore and aft travel and 360° seat rotation• Adds comfort and stability for any swivel boat seat• Mounts underneath seat and on top of pedestal stanchion• Compatible with any 2-7/8" (7cm) diameter tube• Convenient handles provide solid locking at any position• Meets ABYC-H31, Type A Standards & Garelick performance standards• Anodized aluminum for added protection from saltwater corrosionand weathering• Includes retaining hardware (99300) to prevent inadvertent detachment

SPECIFICATIONS:Adds 1 5/8" (4cm) to height. Hole Pattern: 5" x 12" (13x30cm).7" (18cm) Fore and Aft Travel 8.5" W x 13" L (22cm x 33cm) Requiredon Roto molded Seat Models (Includes 459-75081 & 459-99023)

ORDER NO. 459-75083 Mfr. No. 75083

SWIVEL MOUNT TOP360° Positive Lock Swivel Spider Mount Anodized Aluminum Finish• 4 prong spider swivels 360° and locks positively• Fits all Garelick 2-7/8" (7cm) diameter stanchion pedestal seat bases• High tensile aluminum and all stainless hardware• Anodized aluminum finish

ORDER NO. 459-99023 Mfr. No. 99023

459-75535


SEAT SLIDE SYSTEMPositive Lock Slider & Spider Combination Left Hand Lever• Low profile design allows 360° of rotation and 6" of smooth, wobble-free fore and aft travel• Heavy duty anodized aluminum slide plate has standard 5"x12" holepattern to accommodate standard seat mounting holes• Positive Lock Spider – rotates 360°, internal cup engages in 10°increments for positive stop lock (Secondary twist control offersvariable drag adjustment and can be tightened to lock in place)• Internal Delrin cup provides smooth, gall-free operation.• Available in either left- or right-hand operation• Meets ABYC-H31, Type A Standards & Garelick performance standards• Includes retaining hardware (99302)• Silver powder coated finishSLIDE: 13.75" x 8" (35x20cm) slide plate, 5" x 12" (13x30cm)

mounting hole pattern , 6" (15cm) travelSWIVEL: 2-7/8" (7cm) diameter.

ORDER NO. 459-21000 Mfr. No. 21000

STANDARD SERIES

2.875" PEDESTAL DIAMETERRIBBED STANCHION SERIES SEAT HARDWARE

MILLENIUM SERIES

459-75530

ORDER NO. Mfr. No. Adjustable Height459-75535 75535 12” - 17” (30 - 43cm)459-75528 75528 18” - 23” (46 - 58cm)

ORDER NO. Mfr. No. Overall Height459-75531 75531 9” (23cm)459-75530 75530 12” (30cm)459-75515 75515 15” (38cm)459-75532 75532 18” (46cm)459-75533 75533 24” (61cm)

PEDESTAL OPTIONS

PEDESTAL SYSTEMS

628

PEDESTAL SYSTEMS


ADJUSTABLE HEIGHT STANDARD FRICTION LOCK

• Seat raises or lowers, locks at desired height• 2-7/8" (7cm) diameter stanchion tube, 9" (23cm) diameter base plate• Anodized protective finish helps prevent saltwater corrosion and weathering.• 2-7/8" (7cm) diameter ribbed stanchion tube, 9.25" (23cm) diameter 6 hole base plate

ORDER NO. Mfr. No. Adjustable Height459-75535 75535 12" - 17" (30 - 43cm), Anodized Tube459-75528 75528 18" - 23" (46 - 58cm), Anodized Tube

FIXED HEIGHT• Mounts any seat securely• 4 prong spider swivels 360˚ and locks positively

Specifications:2-7/8" (7 cm) diameter smooth stanchion tube,9.25" (23 cm) diameter base plate

ADJUSTABLE HEIGHT• Seat raises or lowers, locks at desired height• 4 prong spider swivels 360˚ and locks positively• PolishedSpecifications:2-7/8" (7 cm) diameter smooth stanchion tube,9.25" (23 cm) diameter base plate

COMPLETE SYSTEM - SMOOTH SERIES

2.875" FIXED & ADJUSTABLE HEIGHT SEAT BASES

ORDER NO. Mfr. No. Description459-75028 75028 18" - 24" Height, Polished

BLUE WATER ADJUSTABLE HEIGHT SEAT BASE- Positive Pin Type Lock

• Pin secures base at specific height in 1" increments• Stainless steel lock pin locates securing hole easily• Positive lock spider, rotates 360˚. Fluted bearing cup fits onto matching ribbed stanchion profile• Wobble free design

ORDER NO. Description459-75435 12” - 17” (31 - 43cm)459-75428 18” - 23” (46 - 58cm)

ORDER NO. Mfr. No. Description459-75031 75031 9" Polished459-75030 75030 12" Polished459-75032 75032 18" Polished459-75033 75033 24" Polished

COMPLETE SYSTEM - RIBBED SERIES

OFFERS BOATERS NEW LEVELS OF COMFORT AND SAFETY INALL WEATHER AND WATER CONDITIONS

• Active Seat Suspension System absorbs and minimizes up to 75% of the shock, jolt, and vibration transmitted tothe passenger from the forces of roll, pitch, and yaw.• Active Seat Suspension Systes reduces the feelings of seasickness and nausea by absorbing excessive movementwith 1" of damped vertical travel.• This system is CAD designed, FEA proven, and precision engineered and tooled.• Components are saltwater spray tested and UV stable; to help endure harsh marine environments.• Made from rugged, high-tensile, anodized aluminum with stainless steel hardware.

Pedestal Base Mounting Options:• Standard bolt hole pattern allows for mounting on top of pedestal and beneath any individual seat• Features heavy duty forward hinge system allowing shock absorption to occur in the vertical plane only, eliminates sway and side tipping• U.S. PATENT #6,042,093• Includes provisions for mounting seats with 6" center hole pattern.• Easily mounts to almost any current seat.

Floor and Deck Mounting Options:• Standard bolt hole pattern allows for easy mounting beneath seat to the deck, a box,or the floor of a boat• Perfect for mounting beneath seat greater than 20" (51cm)• Includes provisions for mounting seats with 6" center hole pattern

SPECIFICATIONS:77000: Compact size and low profile design adds only 2" (5cm) of height.The outline is 13" x 7" (33 x 18cm) with standard 5" x 12 1/8" (13 x 31cm) slotted mounting hole pattern

SEAT HARDWARE


Compatible with fluted tube stanchion seat bases

Adjustable CompressionFeature easily fine tuned

with NO tools

International Patents Pending

SPECIFICATIONS:75080: Standard Size for wood or plastic seats.

6” (15cm) Fore and Aft Travel 8.5” W x 8” L x 1.63” H(22cm x 20cm x 4cm)

75081: Full Length Size for roto-molded seats.7” (18cm) Fore and Aft Travel 8.5” W x 13” L x 1.63” H(22cm x 33cm x 4cm)For use where additional travel and any seat needing reinforcementunderneath. Required on all Roto molded seats.

ORDER NO. 459-77000Mfr. No. 77000

ORDER NO. Mfr. No.459-75080 75080459-75081 75081

LOW PROFILE SEAT SLIDE

ACTIVE SEAT SUSPENSION SYSTEM

459-77000H-31ABYC

Features two movablemicro-cellular urethanefoam seat shocks

• Allows helm or boat seats to adjust fore and aft• Slide mounts under seat in between seat and pedestal base• Convenient handle provides solid locking at any position• Compatible with most 360° spiders• Wobble-Free Design/Operation• Anodized aluminum with stainless steel hardware• Spider swivel casting (459-99023,459- 99036) not included

Pedestal Base Mounting77000 Active Seat Suspension System

459-75080

459-75081

629

630

SLIDES/SWIVELS/PEDESTALS


• 3.5" Diameter Stanchion for Mid-Size (30 Ft.+) Boats• Proportionately to Scale for added Strength and Styling• Design accommodates all Garelick EEz-In Seat Slide and Swivel Spiders• Popular Heights Available – 3 Fixed Heights and 2 Adjustable Heights• Meets ABYC, H-31 Type A Standards• 3.5" (9 cm) diameter smooth stanchion tube, stanchion base casting 10.5" (27 cm) diameter6 hole, 3/8" mounting holes.

• Polished and Anodized aluminum components

SEAT SLIDE SYSTEMPositive Lock Slider & Spider Combination Left Hand Lever, Silver Powder Coat Finish• Low profile design allows 360° of rotation and 6" of smooth, wobble-free fore and aft travel• Heavy duty anodized aluminum slide plate has standard 5"x12" hole pattern to accommodate standard seatmounting holes

• Positive Lock Spider – rotates 360°, internal cup engages in 10° increments for positive stop lock (Secondary twistcontrol offers variable drag adj. and can be tightened to lock in place)

• Internal Delrin cup provides smooth, gall-free operation.• Available in either left- or right-hand operation• Meets ABYC-H31, Type A Standards & Garelick performance standards• Includes retaining hardware (99302)SLIDE: 13.75" x 8" (35x20cm) slide plate, 5" x 12" (13x30cm)

mounting hole pattern , 6" (15cm) travelSWIVEL: 2-7/8" (7cm) diameter. ORDER NO. 459-21000 Mfr. No. 21000

MID-RANGE SEAT HARDWARE

MILLENIUM SERIES

STANDARD SERIES

SEAT SLIDE AND SWIVEL• Provides smooth fore and aft travel and 360° seat rotation• Adds comfort and stability for any swivel boat seat• Mounts underneath seat and on top of pedestal stanchion• Compatible with any 2 7/8"(7cm) diameter tube• Convenient handles provide solid locking at any position• Meets ABYC-H31, Type A Standards & Garelick performance standards• Anodized aluminum for added protection from saltwater corrosionand weathering

• Includes retaining hardware (99300) to preventinadvertent detachment

SPECIFICATIONS:Adds 1 5/8" (4cm) to height. Hole Pattern: 5" x 12" (13x30cm).7" (18cm) Fore and Aft Travel 8.5" W x 13" L (22cm x 33cm)Required on Roto molded Seat Models(Includes 459-75081 & 459-99023)ORDER NO. 459-75083 Mfr. No. 75083

SWIVEL SEAT MOUNT TOP360° Positive Lock Swivel Spider Mount Silver Powder Coat Finish• Low profile design allows 360° of rotation• Heavy duty anodized aluminum slide plate has standard 5"x12" holepattern to accommodate standard seat mounting holes

• 360° rotation is regulated by dual locking devices - lift the positive locklever to rotate. Drop the lever to lock in place in 10° increments.Secondary twist control offers variable drag adjustment and can betightened down to lock in place.

• Internal Delrin Bearing Cup provides smooth, gall-free operation• Silver powder coated finish• Meets ABYC-H31, Type A Standards & Garelick performance standards

ORDER NO. 459-99036 Mfr. No. 99036

SWIVEL MOUNT TOP360° Positive Lock Swivel Spider Mount AnodizedAluminum Finish• 4 prong spider swivels 360° and locks positively• Fits all Garelick 2-7/8" (7cm) diameter stanchionpedestal seat bases

• High tensile aluminum and all stainless hardware• Anodized aluminum finishORDER NO. 459-99023 Mfr. No. 99023

459-99036

459-99023

459-75083

ORDER NO. Mfr. No. Height459-78515 78515 15" (38 cm)459-78524 78524 24" (61 cm)

FIXED HEIGHT PEDESTAL OPTIONS

631For more information see: www.garelick.com

DECK CHAIRS & TABLES

Specifications:

RECTANGULAR TOP:50400: Table is 16" x 24" (41 x 61cm) and16" (41cm) high50405: Table is 16" x 32" (41 x 81cm) size21.5" (55cm) high

ROUND TOP:50410: Table is 24" (61cm) round16" (41cm) high

Order No. Mfr. No.459-50400 50400-01459-50405 50405-01459-50410 50410-01

• Anodized frame resists the elements• Beautiful sewn cushions and arm rests• HDPE seat and back substrates resist rot and warpage• Eight legged frame provides extra stability• Firm resilient 3.5” (9 cm) thick foam• Marine grade vinyl• Durable 1” (3 cm) aluminum double leg frame• Chair folds for stowage, dual locks preventfolding during use

Anodized Aluminum Frame• Lightweight, sturdy and very comfortable• One piece canvas back with 24” (61 cm) high frame• 1” thick foam padded back and thigh support for added comfort• Double leg and front cross bar frame for stability, easy to stow• Beautiful sewn olefin woven fabric, tastefully appointed withembroidered code flag design and contrasting accent trim

• 1” (3 cm) diameter, corrosive resistant foldinganodized aluminum tube frame, poly tips

• Varnished hardwood arms

Specifications:Overall Width: 26" (66 cm)Seat Width: 19" (48 cm) Depth: 15.5" (39 cm)Colour: White

ORDER NO. 454-81061Mfr. No. 48106-61

Specifications:Seat Height: 16" (41 cm)Colours: 62 - Navy Blue w/ Red Trim

ORDER NO. 453-50292Mfr. No. 35029-62

PREMIUM CHAIR TIPS• For 1" chair legs and tube ends • Reinforced, Non-marking, Durable.

ORDER NO. Mfr. No. Description459-76010 76010-01 Premium Chair Tips - White Poly - Package of 4459-76011 76011-01 Premium Chair Tips - Rubber - Package of 4459-76012 76011-02 Premium Double Leg Chair Tips - White Poly - Package of 2

FOLDING DECK TABLES – MELAMINE TOP SERIES

MARINER CHAIR WITH WEATHERPROOF SEWN CUSHIONS

DESIGNER SERIES PADDED DECK CHAIR

Compact size is ideal for decks, inside cabins, or picnics ashore!• Durable hard Finish Top is sealed watertight• Top: Thermofused, white melamine is permanently bonded to core on bothsides, edge finished with molded sea lip.

• Legs: Rugged 7/8” diameter aluminum, folds flat, plastic tips

459-50410459-50400

632

27"

459-75650

459-75640

TABLE PACKAGES

459-75320 459-75321

ORDER NO. Mfr. No. Description459-75650 75650 Includes complete system 75640 and 15" x 28"(38 x 71cm) rectangular white polymer table top

and two recessed cup holders459-75320 75320 Includes complete system 75640 and 18" x 30"(46cm x 76cm) oval, acrylic-coated ABS plastic table top

with two recessed cup holders459-75321 75321 Includes complete system 75640 and 16" x 32"(41cm x 81cm) rectangular, ABS plastic table top with

four recessed cup holders459-75640 75640 Complete system includes: deck ring, socket base, table mounting socket, 25.5" stanchion tube

• Springfield is now offering the same high quality componentsin complete table packages• Springfield table packages are made of components designed andmanufactured to offer years of satisfactory service• These table packages are available with round or oval table tops• The tops are constructed of high quality injection molded plastic anddesigned for lasting strength and durability• All packages are approximately 27" in height• Round Table - 24" diameter• Oval Table - 18" x 30"• Table Pedestals - Base: 7" diameter,5-3/4” hole pattern extends 2" below deck, 3-1/2" diameter hole in deck• Table Pedestals - Uni-Lock Series Base: 7" diameter,5-3/4" hole pattern extends 2" below deck, 3-1/2" diameter hole in deck

169-01060Thread LockOval Table Package

169-01020Thread LockRound Table Package

... Add a Table to your Boat, Deck, or Patio with ease. No difficult hole to cut in the deck.

ORDER NO. Mfr. No. Description169-01020 1690102 Thread Lock Table Package - Round169-01060 1690106 Thread Lock Table Package - Oval169-02020 1690202 Stowable Anodized Table Package - Round169-02060 1690206 Stowable Anodized Table Package - Oval169-03020 1690302 Uni-Lock Value Package - Round169-03060 1690306 Uni-Lock Value Package - Oval

• Patented, revolutionary table hardware system• Quick release levers allow effortless take-down of table system for storage• Simple to use, simple to install• Low-Profile deck ring creates minimal interference when table is stowed• No large centre hole in deck as is common with othertable hardware systems• Marine grade polymer components resist corrosion• 2-1/4" ribbed Anodized aluminum stanchion is tapered at both ends• 9-1/4" and 13" stanchion posts available for converting dinette into bunk use• Individual components available if additional mounting locations are desired

Model No. 75640 PedestalORDER NO. 459-75640

QUICK RELEASE TABLE PEDESTAL SYSTEM

COMPLETE TABLE PACKAGES

For more information see: wwwgarelick.com

Thread LockPost

StowawayAnodized Post

Uni-LockPost


633

ORDER NO. Mfr. No. Description Overall Height

459-75350* 75350 Flush Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)

459-75351 75351 Surface Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)

459-75355* 75355 Flush Mount Taper Socket Base Only

459-75356 75356 Surface Mount Taper Socket Base Only

459-75357** 75357 Fluted Taper Stanchion Post Only 30" (76 cm)

459-75358*** 75358 Fluted Taper Stanchion Post Only 28.75" (73 cm)

459-75446 75446 Fluted Taper Stanchion Post Only 28" (71 cm)

TABLE HARDWARE

459-75355Flush Mount

459-75356Surface Mount

459-75345Flush Mount

459-75346Surface Mount

*Flush mount bases require drilling into deck and extend 2.75” below deck**For use with # 459-75355 (75355) type bases ***For use with # 459-75356 (75356) type bases

*Flush mount bases require drilling into deck and extend 2.75” below deck**For use with # 459-75345 (75345) type bases ***For use with # 459-75346 (75346) type bases

459-75350

459-75340

Table Pedestals for Smaller Boats:2.25" Post & 7" Dia. Base

• Provides salon areas and pontoon decks with removable dinette tables• Engineered for marine use• 3 piece, all-aluminum provides solid table base• Fluted profile stanchion with protective anodized finish• Quick stowage• Tapered on both ends for snug/no wobble fit

The Latest in Innovative Engineering for Optimal Performance

• Provides adjustable height in salon/cabin areas.• Self-standing, 19" Square base 3/8" thick, with 9" X 13" table top support 1/4" thick.• Ultra smooth gas powered operation adjustable 20" to 29" height.• Polished and anodized finish to resist saltwater corrosion.• 40 Lb. Gas spring• Patent PendingORDER NO. 459-75460 Mfr. No. 75460Specifications: 3/8" thick anodized aluminum plate with 3.5" stanchion tube, twist lock T-handle

GAS RISE YACHT TABLE BASE

STOWABLE MARINE TABLE HARDWARE

Table Pedestals for Larger Boats:2.875" Post & 9-1/4" Dia. Base

• Provides salon areas and pontoon decks with removable dinette tables• Engineered for marine use• 3 piece, all-aluminum provides solid table base• Fluted profile stanchion with protective anodized finish• Quick stowage• Tapered on both ends for snug/no wobble fit

For more information see:www.garelick.com

ORDER NO. Mfr. No. Description Overall Height

459-75340* 75340 * Flush Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)

459-75341 75341 Surface Mount Base w/ Fluted Anodized Tube (3 PC Set) 30" (76 cm)

459-75345* 75345 * Flush Mount Taper Socket Base Only

459-75346 75346 Surface Mount Taper Socket Base Only

459-75347** 75347 ** Fluted Taper Stanchion Post Only (Flush Mount) 30" (76 cm)

459-75348*** 75348 *** Fluted Taper Stanchion Post Only (Surface Mount) 28.75" (73 cm)

634

TABLE KITContains # 121-10300 white octagonal table top,# 121-12200 table leg and # 121-12700 flushmount table receptacle.ORDER NO. 121-10800- Octagonal Table Kit

TABLE TOPOctagonal - Measures 20" across and comes with fourlarge molded-in recesses to accommodateinsulated cup holders.Installed table height is 27". Colour: WhiteORDER NO. 121-10300- Octagonal Table Top Only

TABLE LEGPolished Stainless Steel Leg - 2" diameter tube measure26" in length. Made of corrosion resistant304 stainless steel.ORDER NO. 121-12200- Table Leg - Stainless steel

304 Stainless Steel

Detmar’s marine and RV Removable Table System permits quickand easy setup in virtually any boat or RV camper. Octagonal(8-sided) shape molded from high impact plastic for durability andcorrosion resistance to sun, salt water and solvents. The tablerequires no maintenance. Cleanup can be done with soap and water.

For easy installation and removal the table has a molded-inunderside receptacle to fit 2" diameter table legs.

Rail Tube FastenerORDER NO. Mfr. No. Description Height O.D.422-54106 / ea. 254106-1 6" Stud Mount Hand Rail 2" 3/4" 5/16" x 18422-54112-1 / ea. 254112-1 12" Stud Mount Hand Rail 2" 3/4" 5/16" x 18

REMOVABLE MARINE / RV TABLE

RECEPTACLES

STUD MOUNT HAND RAILS

FLOOR RECEPTACLESRecessed Flush Mount - Molded of high-impactplastic, receptacle mounts flush to floor. Basemeasures 6-1/2" in diameter with a 1-5/8" recess.Table leg hole has molded-in plug eliminating needto cap hole when leg is not in place. Molded toaccept # 10 x 1-1/4" oval head SM screws.Fits 2" diameter legsORDER NO. 121-12700- Receptacle - Flush Mount, Black

TABLE RECEPTACLESurface Mount - Molded of high-impact plastic thisreceptacle mounts flush to underside of table or tofloor. Base measures 6-1/2" in diameter. Molded toaccept # 10 x 1" pan head screws.Fits 2” diameter legsORDER NO. 121-13100- Surface Mount Table Receptacle, Black

Floor Receptacle Table Receptacle

For more information see: www.detmarcorp.com

For more information see: www.sea-dog.com

TABLE & ACCESSORIES/HANDRAILS

CC Marine 2013-14 Catalogue_Seating

Documents

Transcript of CC Marine 2013-14 Catalogue_Seating