CC Marine 2013-14 Catalogue_Fuel System
description
Transcript of CC Marine 2013-14 Catalogue_Fuel System
![Page 1: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/1.jpg)
FUELSYSTEM&HOSE
![Page 2: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/2.jpg)
18-800-1120 18-801-1120 18-802-1120
Style Hose I.D. Thread ORDER NO.
Straight Male 1-1/2" 1-1/2" MP 18-800-1120
Straight Female 1-1/2" 1-1/2" FP 18-801-1120
90º Male 1-1/2" 1-1/2" MP 18-802-1120
90º Female 1-1/2" 1-1/2" FP 18-803-1120
Hose Tee 1-1/2" N/A 18-806-1120
I.D. O.D Ply VacRating
Length /Package
ORDER NO.
1" 1-21/64" 2 28 50 ft. Coil 116-105-1000
1-1/2" 1-27/32" 2 28 50 ft. Coil 116-105-1120
I.D. BendRadius
VacRating Length / Package ORDER NO.
5/8" 3 28 50 ft. R/O Carton 116-146-0586
3/4" 3 28 50 ft. R/O Carton 116-146-0346
1" 3 28 50 ft. R/O Carton 116-146-1006
1-1/8" 4 28 50 ft. R/O Carton 116-146-1186
1-1/2" 4 28 50 ft. R/O Carton 116-146-1126
I.D. O.D Ply BurstPressure
ORDER NO.Sold per Foot
1-1/2" 1-55/64” 2 150# 101-11201
I.D. BendRadius
VacRating Length/Package ORDER NO.
1-1/2" 5 28 25 ft. Coil 148-11250
1-1/2" 5 28 50 ft. Coil 148-11201-50
1-1/2" 5 28 100 ft. Coil 148-11200
89418-803-1120
SHIELDS VAC EXTRA HEAVY DUTY/INDUSTRIAL GRADE HOSE• Bilge pump intake and discharge• Drains - sink, shower, scupper• Potable water tank fill• Livewell intake and drain• Sanitation - intake, vent, pump outSmooth cover clear FDA formula PVC with white vinyl helix.Rated for full vacuum. Resistant to: Mild chemicals, salt water.Do not use ethylene glycol based antifreeze in hose.For below waterline connections.Do not use in pressurized water systems.
SHIELDS VAC EXTRA HEAVY DUTY/FDASmooth white FDA grade PVC with vinyl helix. Rated for full vacuum.Resistant to: Mild chemicals, salt water, permeation.• Sanitation - Toilet to holding tank-self-draining lines, intake, vent, pump out• Bilge Pump intake and discharge• Resistant to: Odour permeation• Drains - Sink, shower, scupper• Potable water tank fill• Livewell intake and drainDo not use glycol based antifreeze in hose. Do not use in pressurized water systems.
SHIELDS SANITATION HOSEEPDM tube & cover, wire reinforced, two fabric plies. Kink resistant and flexible.Resistant to: Toilet chemicals, odour permeation, ozone, salt water, heat.• Toilet to holding tank• Holding tank pump out• Maximum resistance to odour permeation
SHIELDS POLY-X SANITATION HOSEThe ultimate sanitation hose. Lifetime warranty against odour permeation. Combines theflexibility of a rubber hose with the ultimate permeation resistance of Polyurethane.Poly X can easily be slipped over most fittings.Polyurethane cover is very abrasion resistant.Glossy cover for easy clean up.• Head to holding tank• Holding tank pump out
SANITATION HOSE FITTINGSFiberglass reinforced nylon fittings designed to fit Series 101, Series 105,Series 144 and 148 hoses without heating or special tools.For use in sanitation systems, deck drain systems and water tank fill.Fittings are durable, chemical and fuel resistant, will not rustor cause electrolysis.
I.D. BendRadius
VacRating
Length/Package
ORDER NO.
3/4" 3/4" 20 6'/Bag 120-03410
3/4" 3/4" 20 9'/Bag 120-03430
3/4" 3/4" 20 50'/Box 120-03460
1-1/8" 1" 20 6'/Bag 120-11810
1-1/8" 1" 20 9'/Bag 120-11830
1-1/8" 1" 20 50'/Box 120-11860
1-1/2" 2” 20 Sold Per Foot 120-11201
SHIELDS BILGEFLEXSingle layer corrugated polyethylene.Resistant to: Mild chemicals, saltwater. Clamping cuff every foot• Bilge pump discharge• Available in blackDo not attach to thru hullfitting below the water line.
For more information see:www.teleflexmarine.com/products/hose
CONSTRUCTION:Tube: Smooth, white EPDM, chemicals and detergent
resistant.Reinforcement: 2 textile fabric plies with one steel wire.Cover: Smooth, POLYURETHANE, heat, weather, ozone
and abrasion resistant, glossy cover.
BILGE/SANITATION HOSE
18-806-1120
![Page 3: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/3.jpg)
895For more information see: www.teleflexmarine.com/products/hose
I.D. O.D Ply ORDER NO.12-1/2 ft. Length
ORDER NO.Sold per Foot
5/8" 1-1/32" 2 N/A 200-058013/4" 1-9/64" 2 N/A 200-034017/8" 1-17/64" 2 116-200-0784 N/A1" 1-3/8" 2 116-200-1004 N/A
1-1/4" 1-45/64" 2 N/A 200-114011-1/2" 1-15/16" 2 N/A 200-112011-3/4" 2-13/64" 2 116-200-1344 N/A2" 2-31/64" 2 116-200-2004 N/A
2-1/2" 3" 2 116-200-2124 N/A3" 3-9/16" 2 116-200-3004 N/A
3-1/2" 4-3/32" 2 116-200-3124 N/A4" 4-17/32" 4 116-200-4004 N/A
ALL CLEAR PVC TUBING POLYESTER REINFORCED(Red-Tracer)Polyester braid reinforcement - 250 psi burst pressure.Clear heavy wall FDA formula vinyl.• Pressurized Water System Supply - Hot Or Cold• Drain Lines - Sink, Shower, Ice Box• Wash Down Pump Connections• Head Intake
I.D. O.D. BurstPressure
ORDER NO.Sold per Foot
1/2" 23/32" 250# 162-012015/8" 27/32" 250# 162-058013/4" 31/32" 250# 162-03401
I.D. O.D. BurstPressure
ORDER NO.Sold per Foot
1/2" 11/16" 250# 164-012015/8" 13/16" 250# 164-058013/4" 15/16" 250# 164-03401
PVC TUBING-CLEAR• Non-pressurized Potable Water System Supply• Drain Lines - Sink, Shower, Ice BoxSingle layer FDA formula vinyl.Not for hot water or pressurized water systems
CLEAR WHITE PVC TUBING POLYESTER REINFORCED(Blue-Tracer)White FDA formula vinyl tube. Clear vinyl cover.Polyester braid reinforcement - 250 psi burst pressure.• Pressurized Water System Supply - Hot Or Cold• Drain Lines - Sink, Shower, Ice Box• Wash Down Pump Connections• Head Intake
SHIELDSFLEX II MARINE WATER/EXHAUST HOSE(w/Wire)Black synthetic rubber tube and cover. Reinforced with wire helix imbedded betweenplies of HD synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals,antifreeze, salt water. Abrasion resistant. Odour permeation resistant.• Engine Intake• Wet Exhaust Connections - Use Where Bends Or Long Lengths Required• Bilge Pump Intake/ Discharge• Scupper Lines• Toilet Intake, Discharge• Holding Tank Vent, Pump OutTemperature range:-20° F to +200° F continuous, +250° F intermittent
Meets SAE J2006 Type R2Meets ISO 13362:2004 - Type 1 - Class B
I.D. Wall BurstPressure 70˚
ORDER NO.Sold per Foot
1/2" .110 45# 150-012015/8" .110 40# 150-058013/4" .110 35# 150-03401
SHIELDS MARINEEXHAUST/WATER HOSE (No Wire)Black heavy walled synthetic rubber. Reinforced with 2 or 4 plies ofsynthetic cord. Resistant to: Engine heat, exhaust fumes, ozone, mildchemicals, antifreeze, salt water.• Straight Connections In Wet Exhaust Systems• Engine Water Circulation LinesTemperature range: -20° F to +200° F continuous +250° F intermittentMeets SAE J2006 Type R1Meets ISO 13362:2004 - Type 2 - Class B
I.D. O.D. *ORDER NO.2-1/2" 2-7/8" 250-212413" 3-7/16" 250-30041
3-1/2" 4" 250-312414" 4-5/8" 250-40041
I.D. O.D. ORDER NO. Pre Cut Length5/8" 61/64" 250-05801-12 12-1/2 Ft.3/4" 1-1/16" 250-03401-12 12-1/2 Ft.1" 1-5/16" 250-01001-12 12-1/2 Ft.
1-1/4" 1-19/32" 250-11441-12 12-1/2 Ft.1-1/2" 1-53/64" 250-11241-12 12-1/2 Ft.1-5/8" 2" 250-15841-12 12-1/2 Ft.1-3/4" 2-1/8" 250-13441-12 12-1/2 Ft.2" 2-31/64" 250-20041-12 12-1/2 Ft.5/8" 61/64" 250-05801-25 25 Ft.3/4" 1-1/16" 250-03401-25 25 Ft.1" 1-5/16" 250-01001-25 25 Ft.
1-1/4" 1-19/32" 250-11441-25 25 Ft.1-1/2" 1-53/64" 250-11241-25 25 Ft.5/8" 61/64" 250-05801-50 50 Ft.3/4" 1-1/16" 250-03401-50 50 Ft.1" 1-5/16" 250-01001-50 50 Ft.
1-1/4" 1-19/32" 250-11441-50 50 Ft.1-1/2" 1-53/64" 250-11241-50 50 Ft.1-5/8" 2" 250-15841-50 50 Ft.1-3/4" 2-1/8" 250-13441-50 50 Ft.2" 2-13/32" 250-20041-50 50 Ft.
PRE CUT LENGTHS
IMPROVEDNOW DOUBLE THE OZONE RESISTANCE
REQUIRED BY SAE J2006
WATER/EXHAUST HOSE
![Page 4: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/4.jpg)
896
SHIELDS SERIES 368 LOW PERMEATIONMARINE FUEL HOSEFuel Feed - Gasoline up to 85% ethanol blended fuels/diesel/Bio=diesel all blends.Complies with EPA and CARB very low permeation requirements.Meets USCG Type A1-15Requirements for pleasure boats.• Plastic barrier veneer with NBR outer layer tube to limit permeation.• Polyester reinforced.• Weather / UV resistant NBR/PVC cover.• Temperature range: -20° F to 212° FMeets SAE J1527 Type A1-15, ISO 7840 Type A1 NMMA/CE Type Accepted
I.D. O.D. Colour Length ORDER NO.
3" 3-1/8" Black 50' 116-420-3000
4" 4-1/8" Black 50' 116-420-4000
SHIELDS EXTRA HEAVY DUTY VINYLVENTBLOWER VENT HOSE• Venting Of Bilge FumesExtra heavy PVC wall. Supported by vinyl coatedhelical wire. Resistant to: ozone, UV, corrosion.Flame resistant: Meets UL 94V standard.
SHIELDS 400/402 VINYLVENTPVC supported by anodized wire helix. Resistant to UV and ozone.• Venting of Bilge Fumes.
SILVERADO 4000 OUTBOARD FUEL LINEMeets SAE J1527 Type B1-15 and ISO 8469• Ultra low permeation – meets EPA & CARB standards• For use in above deck primer bulb assemblies• Resistant to ethanol blend fuels• 2 year replacement warranty• For pleasure boats only
I.D O.D Colour Length/Package
ORDER NO.
3" 3-1/8" White Sold per foot 400-300003" 3-1/8" White 50'/Box 400-330003" 3-1/8" Black 50'/Box 400-330014" 4-1/8" White Sold per foot 400-400004" 4-1/8" White 50'/Box 400-440004" 4-1/8" Black 50'/Box 400-44001
I.D O.D. Ply BurstPressure
Length/Package
ORDER NO.
5/16" 19/32" 2 175# 50'/Box 337-05660
5/16" 11/16" 2 250# 50'/Box 337-05660
5/16" 19/32" 2 175# Sold per foot 337-05601
3/8" 21/32" 2 175# 50'/Box 337-03860
3/8" 21/32" 2 175# Sold per foot 337-03801
I.D O.D. Ply BurstPressure
Length/Package
ORDER NO.
5/8" 29/32" 2 175# 50'/Box 315-05860
5/8" 29/32" 2 175# Sold per foot 315-05801
SHIELDS FUEL FILL HOSEResists gasoline/alcohol blends. Compounded for low permeation.Reinforced with wire helic imbedded between plies of HD synthetic cord.Abrasion resistant. Imported.• Fuel Fill - Gas Or Diesel• For pleasure boats only
Meets SAE J1527 Type A2, ISO 7840 Type A2NMMA and CE type accepted
I.D. O.D. ORDER NO.12-1/2 ft. Length
5" 5-9/16" 116-252-5004
6" 6-9/16" 116-252-6004
8" 8-11/16" 116-252-8004
I.D O.D. Ply BurstPressure
Length/Package
ORDER NO.
1-1/2" 1-57/64" 2 90# 10'/Box 355-11230
1-1/2" 1-57/64" 2 90# Sold per foot 355-11201
1-1/2" 1-57/64" 2 90# 50'/Coil 355-11201-50
Temperature Range:-20˚ F to + 200˚ F Continuous
+ 250˚ F Intermittent
SILVERADO 2000 OUTBOARD FUEL FILL HOSEResistant to gasoline/alcohol blends. Remains flexible at lowtemperatures. UV resistant. Temperature range: -5°F to 180°F.EPA regulations do not allow use of this product in new detachablefuel line assemblies. Meets SAE J1527 Type B2
For more information see: www.teleflexmarine.com/products/hose
IMPROVEDNOW DOUBLE THE OZONE RESISTANCE
REQUIRED BY SAE J2006
SHIELDSAUST- CBlack synthetic rubber tube and cover.Reinforced with double wire helix imbedded between plies of synthetic cord.Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water.Abrasion resistant.• Wet Exhaust Connections With Significant Bends• Engine Intake• Scupper LinesMeets SAE J2006 Type R2
2 YEAREMISSION
PERFORMANCEWARRANTY
I.D. O.D. Ply BurstPressure
Length/Package
ORDER NO.
1/4" 19/32" 2 250# 50'/Box 368-01460
1/4" 19/32" 2 250# Sold per foot 368-01401
1/2" 19/32" 2 250# 50'/Box 368-01260
5/16" 11/16" 2 250# 50'/Box 368-05660
5/16" 11/16" 2 250# Sold per foot 368-05601
3/8" 11/16" 2 250# 50'/Box 368-03860
3/8" 11/16" 2 250# Sold per foot 368-03801
5/8" 1-1/32" 2 175# 50'/Box 369-05860
5/8" 1-1/32" 2 175# Sold per foot 369-05801
WATER/EXHAUST/FUEL/BLOWER VENT HOSE
![Page 5: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/5.jpg)
897
HOSE ACCESSORIES
SILICONE SINGLE / DOUBLE HUMP COUPLERSBlue silicone cover with smooth finish for easy clean up.Stable at elevated temperatures.Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water.• Provides Angular And Longitudinal Vibration Absorption In Wet Exhaust Systems• Corrects Slight Offset In PipesTemperature range: -20° F to +350° FMeets SAE J2006 Type R1
I.D. Length Lbs. ORDER NO.
4" 6" 2 116-272-4000
I.D. Length Lbs. ORDER NO.
6" 14" 3 116-274-6000
8" 14" 3 116-274-8000
Single Hump
Double Hump
HOSE CLAMPSAll Components Are Manufactured From Marine Grade 316 StainlessSteel. These Clamps Are Designed To Fit Many Applications.
Hose Clamps are made entirelyof marine grade stainless steelincluding the screw, band, andhousing for durabilityand longevity in the marineenvironment.
Size Hose Clamp ORDER NO.
7/32" - 5/8" 5/16" Band 530-01500*
7/16" - 25/32" 5/16" Band 530-02500
7/16" - 25/32" 1/2" Band 530-04500*
9/16" - 1-1/16" 1/2" Band 530-06500*
13/16" - 1-1/2" 1/2" Band 530-08500*
13/16" - 1-3/4" 1/2" Band 530-09500*
1-1/16" - 2" 1/2" Band 530-10500*
1-13/16" - 2-3/4" 1/2" Band
1-916" - 3-1/2" 1/2" Band
530-12500*
530-14500*
Note:* Denotes items on Display
STAINLESS STEELHOSE CLAMP DISPLAYDisplay consists of 10 Each of8 Items- Merchandiser of 8 most popular
sizes ofSS Hose clamps
- Clamp, screw and housing allmade of non-magnetic marinegrade stainless steel.
- Sizes displayed on header foreasy selection and reordering.
ORDER. NO. 980-04900
EXHAUST HOSE CLAMPST-BOLT BAND CLAMPSBand: 316 stainless steel, .025 thick by .75 wideHardware: 316 stainless steel, 1/4" bolt, nylon inset locknut.Extra long bolt for maximum adjustment.Torque to 75 inch pounds maximum.• Exhaust Hose Clamp• Intake Hose Clamp - Any Below Water Line Application• Works With Corrugated Exhaust Hose• Full 360° Clamping Surface• Corrosion Resistant 316 Stainless SteelDesigned to fit Shields series 200, 201, 210, 250, 252.
Clamp No. Nominal Size Min.Dia Max Dia ORDER NO.
# 6 3/8" 3/8" 26/32" 104-46806
# 10 5/8" 8/18" 1-1/8" 104-46810
# 16 1" 5/8" 1-1/2" 104-46816
# 28/30 1-3/4" 1-7/16" 2-3/8" 104-46828
# 36 2-1/4" 1-13/16" 2-3/4" 104-46836
# 52 3-1/4" 2-13/16" 3-3/4" 104-46852
Hose I.D. Diameter Range ORDER NO.2" 2.31 - 2.69 118-720-2000
2-1/2" 2.68 - 3.34 118-720-21203" 3.10 - 3.76 118-720-3000
3-1/2" 3.59 - 4.25 118-720-31204" 4.18 - 4.84 118-720-4000
4-1/8" 4.25 - 4.95 118-720-41804-1/2" 4.75 - 5.41 118-720-4120
5" 5.30 - 5.96 118-720-50005-1/2" 5.75 - 6.41 118-720-5120
6" 6.38 - 7.04 118-720-60008" 8.42 - 9.08 118-720-8000
BULK TOPSIDE FUEL LINE HOSE• Fuel line hose for fuel system rigging• Designed to be used above the deck• Sold in 100’ Reel Box
ORDER NO. Mfr. No. Size615-34375 07492 3/8" I.D.615-34313 07493 5/16" I.D.
615-34313
MARINE GRADE SS HOSE CLAMPS - 10 BOX
For more information see: www.sceptermarine.com
For more information see: www.teleflexmarine.com/products/hose
For more information see: www.handimanmarine.com
![Page 6: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/6.jpg)
PORTABLE/ABOVE DECK FUEL TANKS
For more information see www.sceptermarine.comFor more information see: wwwwww.dockedge.com
22.7L
11.4 L
12 L
25 L
OEM’S CHOICE TANKS• The OEM’s choice in lightweight, non-corroding portable fuel tanks.• Includes a universal 1/4 NPT fuel pick-up adapter.• Fulfills all your large or small outboard engine needs.• ISO and CSA certifiedORDER NO. Mfr. No. Capacity Dimensions080-12000 03780 3.2 Gal. 14.25"L x 10.25"W x 9"H
12 Litre 362mmL x 260mmW x 228mmH080-25000 03781 6.6 Gal 21.25"L x 14"W x 9.75"H
25 Litre 546mmL x 355mmW x 225mmH
DINGHY MATE• Made of lightweight, high strength cross-linked polyethylene.• Simple mounting on the transom under the outboard motor of yourinflatable boat or dinghy.
• Patented design.• ISO and CSA certified.ORDER NO. Mfr. No. Capacity Dimensions080-00003 04156 3 Gal. 23"L x 6.5"W x 12.75"H
11.4 Litre 584mmL x 165mmW x 323mmH080-00006 04157 6 Gal. 26"L x 8"W x 14.75"H
22.7 Litre 660mmL x 203mmW x 374mmH
ORDER NO. Mfr.No. Description615-08266 08266 MaxFlo Flo n’ Go Universal Hand Pump
At-the-handle pump control allows for auto shut off and re-start as well asclean hassle free siphon control.Superior filling convenience – For best results use gravity mode.One way valve – Meets EPA requirements,convenient pump holder handle• Fits all branded plastic gas cans• Ideal for automotive, lawn tractors, boat engines, jetski’s, ATV’s, etc.• Delivers a flow rate of over (7.5L per/min.)• Included rubber cones fit most neck openings• Rubber cone design doesn’t rely on us neck finish sizes• Completely drains fuel from tank with no messy funnels, spills orsplashing
• Includes child safety lock• 2 metre hose included• Environmentally friendly
EPAAPPROVEDFlon’go Maxflo FUEL SIPHON
– HIGH FLOW MODELAt-the-handle pump control allows for auto shut off and re-start as wellas clean hassle free siphon control.Superior filling convenience – For best results use gravity mode.One way valve – Meets EPA requirements,convenient pump holder handle• No Lifting - No Spills - No Overfills• Ideal for automotive, lawn tractors, boat engines, jetski’s, ATV’s, etc.• Fits all branded plastic gas cans• Delivers a flow rate of over 2 gallons per/min (7.6L)when used in siphon mode
• EPA Approved• Environmentally friendly
PUMP & FILL PRESSURIZEDFUEL PUMP WITHFILL NOZZLEThe PUMP & FILL pressurized system pumpsfluids as much as 4 times the rate of siphonsystems. Reduce the danger of over fills, costly spills,expensive clean ups, damaged property, and dangerousincidents of fire and explosion. Flow rate of up to2-1/4 U.S. gallons (8.5 Litres) per minute.ORDER NO. 440-91700Mfr. No. 91700F
Flon’go Maxflo UNIVERSAL SIPHON PUMP14 GALLON (53 LITRE)WHEELED FUEL TRANSPORT• Flo n’ Go LE (06799) Hand Pump is Included!!• Whether your fueling needs include water craft,hunting, camping, generator, backyard powerequipment, etc., the wheeled fuel transportmakes refueling a snap!
• Dual shut-off valves• Use with gasoline, diesel or kerosene• Quickly refuels• UL approved, mechanically vented fill cap.• Allows fuel to be pumped in any direction - even upward!• Ergonomically designed, heavy-duty top handle with extra deep baseunit handholds for transport.
• Meets D.O.T. & UN transportation requirements.• Sturdy 6" (152mm) wheels eases maneuvering over uneven terrainORDER NO. 080-67920
ORDER NO. Mfr.No. Description080-83380 08338 MaxFlo Flo n’ Go Fuel Siphon
898
![Page 7: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/7.jpg)
PORTABLE/ABOVE DECK FUEL TANKS
899For more information see: www.sceptermarine.com
11.4 L
22.7 L
Model No. 08190
Model No. 08189
Model No. 08191Low Profile
FUEL TANKSLooks and performs better than any other fuel tanks available• Mechanically vented fuel cap ensures easy gripping with exclusiveribbed design that floats• Features 90˚, 1/4NPT fuel withdrawal elbow• Includes mechanical direct-sight gauge with easy-to-read indicator• Manufactured from high-density polyethylene with UV-stabilized resin• Specifically designed for use in Boston Whalers®, Carolina Skiff® andKey West® bench style, center console, pontoon, deck and jon boat designs
• Tested to CSA standards
GAS WALKER• Weight Empty: 44 Ibs. (20 kgs.)• Weight Full: 223 Ibs. (102 kgs.)• Approximate Gravity Feed Rate: 7.5 Litre / 2 Gallon / min• Fuel Line: 3m (10') x 3/4" (19mm) hose• Pump handle construction: Aluminum• Rotary pump available• Approximate Rotary Pump Feed Rate: 15.1 Litre / 4 Gallon /min• Durable cross-linked polyethylene with UV inhibitors construction• Built-in handle makes maneuvering a fully loadedGas Walker to the dock easy!
• Brass shut-off valve safely controls fuel flow• Padlock access on 110 liter (29 Gallon) handle preventsunauthorized fuel discharge
• Manually vented fuel cap has easy-to-grip ribs• Molded-in hose storage compartment helps keep your storage areaneat and safe
• Electric static discharge grounding wire is included
• DOT Approved• UN Approved• Grounding cables supplied• Recessed wheels• Extra strong built-in handle• Safe for use with gasoline,diesel & kerosene - Do Not Mix!
• Meets requirements fortransporting gasoline
• Red in colour
ORDER NO. Mfr. No. Capacity Dimensions615-08189 08189 9 Gal. 23"L x 14.25"W x 11.75"H
34 Litre 582mmL x 364mmW x 299mmH615-31112 08190 12 Gal. 23"L x 14.25"W x 13.60"H
45 Litre 582mmL x 364mmW x 346mmH615-31212 08191 12 Gal. 24.25"L x 18"W x 10.75"H
45 Litre 617mmL x 460mmW x 273mmH
ORDER NO. Mfr. No. Capacity Dimensions615-08413 08413 29 Gal. 19.5"L x 19.5"W x 43.25"H
110 Litre 50cmL x 50cmW x 110cmH
ORDER NO. Mfr. No. Capacity Dimensions080-03333 04158 3 Gal 16.75"L x 10.75"W x 8"H
11.4 Litre 431mmL x 266mmW x 203mmH080-06666 04921 6 Gal. 20.50"L x 12.75"W x 10.5"H
22.7 Litre 520mmL x 330mmW x 254mmH
NEPTUNE FUEL TANKS• Non-corrosive “Neptune” tanks are tough and lightweight with baffled,manually vented closure caps and a universal 1/4" NPTfuel pick-up adapter.
• ISO and CSA certified.
![Page 8: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/8.jpg)
Scepter Continues to Set the Standard for the Way You Flo n’ Go
Always the leader in portable fuel can technology, Scepter developed the original plasticJerry Can and changed the industry forever. For almost half a century Scepter has
continued to set the standard with evolving product features that are breaking new ground inaway-from-the-pump fuel transport and transfer like our new Child Resistant Closures(CRC’s) available on our full line.
• Scepter Jerry Cans are virtually indestructible, manufacturerd from high-density,unbreakable polyethylene that is rustproof, crush-resistant and non-corroding.
• Self-Venting Jerry Cans feature a reversible self-venting spout – no need to worry aboutseparate vent closures
• All sizes easily attach to the patented Flo n‘ Go™ hand pump.• Extra Large, durable, molded-in handle provides superior comfort, pouring
and carrying ability.
SCEPTER REPLACEMENT FUEL CAPSManually Vented Fuel Cap (use with CSA / UL Products)- for use with 04158, 04921, 03780, 03781.ORDER NO. 080-00018 Mfr. No. 08935
Fuel Cap with Built-in Gauge - use with 03780.ORDER NO. 080-00019 Mfr. No. 09051
Fuel Cap with Built-in Gauge - use with 03781.ORDER NO. 080-00020 Mfr. No. 08936
Gasket for 04081 and 04079.ORDER NO. 080-00017 Mfr. No. 09086
Fuel Pick-up assembly - Use with M25 (Old style tank).ORDER NO. 080-00014 Mfr. No. 09092
Fuel Pick-up assembly - Use with M12 (Old style tank).ORDER NO. 080-00016 Mfr. No. 09089
FUNNELS• Made from tough, high-density polypropylene• Won’t rust, dent, or crack, no drips & leaks• Stabilizing handle allows for smooth steady pouring
ORDER NO. Mfr. No. DESCRIPTION080-03588 03588 4" (100mm) Funnel080-03589 03589 6" (150mm) Funnel080-03587 03587 8" (200mm) Funnel080-03590* 03590 3 Funnel Assortment080-03606 03603 18" Flex Funnel
*Includes 4", 6" and 8" funnels
Mfr. No. 03603
Mfr. No. 03587
Child ResistantClosure
FUEL FILTER FUNNELYour Tool For Pure FuelRemoves water from gasoline and diesel fuel.• Non-Stick coated steel filter• Anti-Static funnel body• Simple, portable and self-cleaning• No replacement parts• Filters gasoline, diesel, heating oil, keroseneand 2-cycle mixed gas
ORDER NO. Mfr.No. Height Diameter Flow Rate962-00030 SIF3C 9" 5.5" 3.5 gpm962-00080 SIF8C 10" 8.5" 5.0 gpm962-00150 SIF15C 10" 8.5" 12 gpm
For more information seewww.shurhold.com
ORDER NO. Mfr. No. Capacity Description080-07081 07081 5 Litre Self Venting Jerry Can w/ CRC1.25 Gal.080-07079 07079 10 Litre Self Venting Jerry Can w/ CRC 2.5 Gal.080-07539 07539 25 Litre Self Venting Jerry Can w/ CRC 6.6 Gal.080-07622 07622 20 Litre Self Venting Jerry Can w/ CRC 5. Gal.
080-04933 04933 20 Litre Manual Venting Water Jerry Can(Light Blue) 5.3 Gal
REPLACEMENT PARTS080-03583 03853 Parts Kit (Contains: Yellow Vent Cap/Stopper,
& Screw Cap)080-03629 03629 Flexible Spout
All parts are made from high-density polyethylene
PORTABLE FUEL - JERRY CANS
PARTS IN KITFLEXIBLE SPOUT
FUEL TANK POURING SPOUTFuel tank pouring spout adapter kit.Dimensions: 8.90" L x 2.63" W x 2.63" HORDER NO. 615-09036 Mfr. No. 09036
900
JERRY CANS & FUEL TANK ACCESSORIES
For more information see: www sceptermarine.com
![Page 9: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/9.jpg)
PERMANENT FUEL TANKS
CUSHION STRIPS
BETWEEN
TANK AND HULL
Permanent Fuel Tank Hold Down Kit Four Brackets Per KitORDER NO.615-35710 Mfr. No.07147
Strap type hold-down kits include 72" of nylon strapand 4 hold downs. (Not shown) Tank Depth: 6-24"ORDER NO.615-35711 Mfr. No.07148Diesel Conversion Kit (Not shown)ORDER NO.615-35724-10 Mfr. No.035724-10
ORDER NO. Mfr. No. Capacity Dimensions615-32512 07116 12 Gal. 24.5"L x 18.5"W x 7.25"H615-32612 07117 12 Gal. 20"L x 14"W x 11.75"H615-32518 07121 18 Gal. 36.5"L x 18.25"W x 7.25"H615-32519 07126 19 Gal. 26"L x 16" W x 11.75"H615-32527 07135 27 Gal. 36.5"L x 16"W x 11.75"H
Leading Boat Buildersuse Scepter Permanent Fuel Tanks because…
95L/25 Gal.ORDER NO. 615-32525Mfr. No. 0713347"L X 18"W X 7.5"H
110 L/29 Gal.ORDER NO. 615-32529Mfr. No. 0714043"L X 25.75"W X 8.63"H
189 L/50 Gal.ORDER NO. 615-32550Mfr. No. 0714645"L X 12.5"W X 22"H
132 L/35 Gal.ORDER NO. 615-32535Mfr. No. 0714269.50"L X 16"W X 8"H
• Comes standard with machined aluminum fill spouts, and ventfittings molded into the tank shell
• Machined aluminum 3/8" withdraw fitting has 360° rotationalcapability for hook-up convenience
• Our fittings hold the highest O.D. & I.D. tolerances in theindustry, ensuring you the highest level of input flow availableduring refueling
• When measuring for tank dimension, allow for hydrocarbonswelling that causes tanks to expand in all directions by 3%
• Add 2-1/8" for moulded fill neck fitting to overall tank height• Ideally suited for gasoline and diesel use
(With Diesel Return Kit/ ORDER NO. 615-35724-10)
PERMANENT FUEL TANKS
FUEL PICK-UPS1/4 NPT Aluminum Withdrawal Tube• 3/8" I.D. nylon tubing is chemical resistant• OEM replacementORDER NO. Mfr. No. Tank Depth615-33500-12 07413 Up to 12” High615-33500-24 07414 Up to 24” High
615-09447 09447 12" Poplock Fuel Pick-Up615-09448 09448 24" Poplock Fuel Pick-Up
615-35710
CRADLE TANK HOLD DOWN KITPlastic coated straps resist corrosion, while insuring a secure installation of tank.(8 each) 22"L Tank Cradle Metal Straps(2 each) 1/4" - 20 x 3" Fully Threaded Hex Head Bolt(8 each) 1/4" - 20 x 1/2" Phillips Head Cap Screw(10 each) 1/4" - 20 Nylock Nut(4 each) #1/4" - 1-1/4" Phillips Button Head ScrewORDER NO. 615-09542 Mfr. No. 09542
TANK MOUNTING STRIPSSelf-adhesive mounting strips cushion between the tankand the hull and provide room for circulation.Can be used for below deck and topside tanks.• 2"W (50.8mm) x 30"L (762mm) x 1/4"H (6.35mm)• Closed cell poly foam construction• Can also be used for padding with hold down straps• BlackORDER NO. 615-09566 Mfr. No. 09566Sold in pairs
For more information see: www sceptermarine.com901
![Page 10: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/10.jpg)
902
MECHANICAL SENDING UNIT
CONVERSION CAPSULES
• Connects to a dash mounted gauge without a conversion capsule.• Consumer can measure their tank depth and make the swingarm the correct length• Internal measurement components will not rust or corrode!• Calibrated to 33-240 Ohms - An industry standard• 100% inspected during manufacturing to ensure the highest quality• Swingarm float rotates easily in 90º increments for tank wall or baffle clearance• Complete with 5 hole gasket and mounting screws
• All mechanical senders are calibrated to 33 to 240 Ohms - an industry standard.Compatible with competitive units
• Mechanical direct sight gauge comes complete on unit• Gasket and screws(5) are included• An optional conversion capsule (615-35760-10) is available for electrical dash-mounted gaugereadouts. Conversion is simple by removal of two screws and replacement of capsule
ELECTRIC REED SWITCH SENDER• Collects fuel level information more consistently than swingarm senders. They achievethis by taking the measurement from the float, which is still a moving part. Fluctuationis much less because the range of motion is much less. Dash mounted gauge.Sender length is 1" shorter than tank depth.
• Stainless steel construction provides efficient performance• Calibrated to 33-240 Ohms - An industry standard• Complete with 5 hole gasket and mounting screws
• An optional conversion capsule (615-35760-10) is available forelectrical dash-mounted gauge readouts. Conversion is simple byremoval of two screws and replacement of capsule
ORDER NO. Mfr. No. Description615-35722-10 07151 Electric Sending Unit for Tanks with a depth of 6" to 12"615-35725 07154 Universal Electric Sending Unit 4" to 27" Kit 33 to 240 Ohms615-35727-10 07156 Dash Mounted Electric Fuel Gauge 33 to 240 Ohms
ORDER NO. Mfr. No. Description615-35750-10 07158 Mechanical Sender Fits 7-1/2" Deep Tank615-35753-10 07161 Mechanical Sender Fits 11-3/4" Deep Tank
ORDER NO. Mfr. No. Description615-35761-10 07169 9" Electric Reed Switch Sender
615-35722-10
615-35759-10
615-35760-10
615-35750-10
For more information see: www.sceptermarine.com
UNIVERSAL FUEL SENDER• Adjustable for tank depths from 4” to 24”• Left or right arm adjustable in 90° increments• Standard SAE 5-hole pattern, rust proof Delrin® flange with rigid aluminium insert• 10-24 stud connections for maximum integrity• Stainless steel, aluminium and brass construction• For isolated or conventional ground systems• 240 (empty) to 33 (full) ohm resistance range• Triple-patented, Made in the USA• Includes gasket, screws and instructions
ORDER NO. Mfr. No. Description109-90424 90424P Universal Fuel Sender Kit105-56948 56948P Universal Fuel Sender Kit & Gauge Kit(Includes universal fuel gauge with black bezel)105-56822 64082 Replacement Gasket for Fuel Sender042-18278 182781P Replacement Light Kit for Gauge
615-35727-10ELECTRIC FUEL SENDING UNIT - SWINGARM
For more information see:www.teleflexmarine.com
ORDER NO. Mfr. No. Description615-35759-10 07167 Direct Sight Mechanical Read Capsule615-35760-10 07168 Conversion Capsule from Mechanical to Electrical
Dash Mounted Gauge 33 to 240 Ohms
FUEL SENDERS
![Page 11: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/11.jpg)
903
FUEL WATER SEPARATORS
Filter Head
Water SeparatingFuel Filter /ReplacementFilter
WaterCollectingBowl
Filter Head
Water SeparatingFuel Filter /ReplacementFilter
WaterCollectingBowl
WATER SEPARATING FUEL FILTERS
Clear Site with Hydro-Shield™ offers the ultimate protection against water andother contaminates to help keep engines running at peak performance!• Bowl and filter head are reusable!• Extends the life of filter by draining collected water from fuel system.• Easy turn thumb screw ensures a positive grip during draining of bowl.• Drainage bowl is manufactured from UV protected resin.• Available with powder coated or composite filter head – each style offers enhanced corrosion protection.• Protect fuel systems from water and other contaminates.• Provides cleaner fuel critical for today’s engines to operate at optimum performance.• Will not separate 2-cycle oil from gasoline.• High performance 3/8 NPT ports offer lower vacuum pressure drop rates.
• Outboard engine use only! • Not for use with diesel fuel!
ORDER NO. Mfr. No. Description080-07800 07800 Clear Site™ Water Separating Fuel Filter System - includes aluminum
powder coated filter head, hose barbs, fuel filter and water collecting bowl080-07811 07811 Clear Site™ Replacement fuel filter and water collecting bowl080-07812 07812 Clear Site™ Replacement fuel filter080-07823 07823 Clear Site™ Water Separating Fuel Filter System - includes composite
filter head, hose barbs, fuel filter and water collecting bowl
The ultimate protection against water and other contaminates for inboard engine use!• Bowl and filter head are reusable!• Extends the life of filter by draining collected water from fuel system.• Drainage bowl is manufactured from UV protected resin.• Available with composite filter head that offers enhanced corrosion protection.• Protect fuel systems from water and other contaminates.• Provides cleaner fuel critical for today’s engines to operate at optimum performance.• Will not separate 2-cycle oil from gasoline.• High performance 3/8 NPT ports offer lower vacuum pressure drop rates.
ORDER NO. Mfr. No. Description080-07825 07825 Clear Site™ Water Separating Fuel Filter System for inboard engines
- includes aluminum powder coated filter head, hose barbs, fuel filterand metal water collecting bowl
080-07824 07824 Clear Site™ Replacement Fuel Filter and Metal WaterCollecting Bowl for Inboard Engines
WATER SEPARATING FUEL FILTERSBONUS PACK• Includes 2 universal water separating fuel filters, 1 composite filter headwith 3/8" NPT hi-flow ports, barbs and plugs
ORDER NO. Mfr. No. Description615-33322-10 07112 Water Separating Fuel Filters Bonus Twin Pack
For more information see: www.sceptermarine.com
![Page 12: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/12.jpg)
904
018-78522018-77760
018-79890
FILTERSORDER NO. Description Micron Rating Replaces018-79440 Short - 3.875" 10 Mercury 35-807172, 35-802893Q018-79450 Long - 4.35" 10 Mercury 35-802893Q, Yamaha - ABB-FUELF-IL-TR018-79460 OMC Thread 10 OMC 502905 OMC Thread018-78660 High Capacity - 6" 10 Yamaha - MAR-FUELF-IL-TR018-79670* V6 EFI (1995 and earlier) 10 Mercury 35-18458Q3018-79680* V6 EFI (1996-current) 10 Mercury 35-18458Q4018-79890 EFI Model Volvo/OMC 10 Volvo SX/EFI 3851218-2, 3852413, Cobra EFI 3862228018-81490 High Capacity 10 Volvo 3847644 - Fits most gasoline applications with
electrical pump018-78440 Short - 3.875" 21 Mercury 35-807172, 35-802893Q018-78450 Long - 4.35" 21 Mercury 35-802893Q, Yamaha-ABB-FUELF-IL-TR018-78460 OMC Thread 21 OMC 502905 OMC Thread018-77890 EFI Model Volvo/OMC 21 Volvo SX/EFI 3851218-2, 3852413
Cobra EFI, OMC 502906
*Late model Fuel Water Separator with Sensor
FUEL WATER SEPARATOR BRACKETSBracket Type Replaces ORDER NO.1/4" Stainless Yamaha MAR-FLTHD-SS-12 018-777703/8" Stainless 018-777601/4" Aluminum Mercury 89876A3 018-78531
Yamaha MAR-FLTHD-AL-123/8" Aluminum 018-77750
BONUS PACK KITS (Includes Bracket, 2 Filters and 2 Pipe Plugs)Kit Type ORDER NO. Micron Rating Contents1/4" Aluminum (Tall Filter) 018-79832* 10 (2) 18-7944 Filters and (1) 18-7853-1 Bracket1/4" Aluminum (Tall Filter) 018-79822* 10 (2) 18-7945 Filters and (1) 18-7853-1 Bracket1/4" Aluminum (Short Filter) 018-78482* 21 (2) 18-7844 Filters and (1) 18-7853-1 Bracket1/4" Aluminum (Tall Filter) 018-78522* 21 (2) 18-7845 Filters and (1) 18-7853-1 Bracket
Replaces: Mercury 35-60494A4, 32-802893Q4, 35-805269A4 / Suzuki 99105-2001 /Yamaha ABA-SEPAR-AT-OR, ABB-SEPAR-AT-OR *All kits contain (2) 18-4256 Pipe Plugs
FUEL WATER SEPARATOR KITS (Includes Bracket, Filter and 2 Pipe Plugs)Kit Type ORDER NO. Micron Rating Contents Replaces1/4" Aluminum (Short Filter) 018-79831 10 (1) 018-79440 Filter and (1) 018-78531 Bracket Mercury 35-802893A4, Q4,
35-60494A41/4" Aluminum (Tall Filter) 018-79821 10 (1) 018-78450 Filter and (1) 018-78531 Bracket1/4" Aluminum (High Capacity Filter) 018-79661 10 (1) 018-78660 Filter and (1) 018-78531 Bracket Yamaha MAR-SEPARA-AT-OR3/8" Aluminum (Tall Filter) 018-79861 10 (1) 018-79450 Filter and (1) 018-77750 Bracket1/4" Aluminum (Tall Filter) 018-79841 10 (1) 018-79450 Filter and (1) 018-77770 Bracket Yamaha MAR-SPRTR-HD-SS3/8" Stainless (Tall Filter) 018-79851 10 (1) 018-79450 Filter and (1) 018-77760 Bracket1/4" Aluminum (Short Filter) 018-78481 21 (1) 018-78440 Filter and (1) 018-78531 Bracket Mercury 35-802893A4, Q4,
35-60494A41/4" Aluminum (Tall Filter) 018-78521 21 (1) 018-78450 Filter and (1) 018-78531 Bracket Yamaha MAR-SEPARA-AT-OR3/8" Aluminum (Tall Filter) 018-77751 21 (1) 018-78450 Filter and (1) 018-77750 Bracket1/4" Stainless (Tall Filter) 018-77771 21 (1) 018-78450 Filter and (1) 018-77770 Bracket Yamaha ABB-SPRTR-HD-SS3/8" Stainless (Tall Filter) 018-77761 21 (1) 018-78450 Filter and (1) 018-77760 Bracket
For more information see: www.teleflexmarine.com
3/8" Pipe Plugs - 18-42641/4" Pipe Plugs - 18-4256
018-78521
018-81490
FUEL WATER SEPARATORS
![Page 13: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/13.jpg)
905
Features at a Glance
Mallory's Water Separating Fuel Filters provideexcellent protection for your engines fuel systemthat no engine should be without. If your engine isnot protected by a Mallory Filter you could riskbeing stranded due to water in your fuel system orpossible damage to your fuel system componentsfrom corrosion. Mallory Fuel filters are constructedto meet or exceed all OEM specifications.
MARINE OIL FILTERSAll oil filters are not created equal. Mallory Marine oil filters aredesigned to meet the requirements of the marine engines theyare engineered to protect.
ORDER NO. Mfr. No. Engine Type OEM Part No. Thread SpecificationCHRYSLER BASED ENGINES
009-57803 9-57803 100, 110, 120, 130, 165, Chrysler L-319 18mm x 1.5170, (Chrysler-Volvo) (w/anti-drainback valve)
009-57802 9-57802 225, 235, 273, 318, 340, Chrysler 1851658 3/4” x 16 NPT383, 413, 440 (w/anti-drainback valve)FORD BASED ENGINES
009-57802 9-57802 4 cyl. 2.3L, V-8 302, 351 Mercruiser 35-802886Q, 3/4” x 16 NPT(Long Canister) OMC 173231, (w/anti-drainback valve)
Chris Craft 16.81-06536,Crusader 9002514,Pleasurecraft R077001,Volvo Penta 835779
009-57806 9-57806 4 cyl. 2.3L, V-8 302, 351 Volvo Penta 1266286, 3/4” x 16 NPT(Short Canister) 430143, Chrysler L-19, (w/anti-drainback valve)
L-1008GM BASED ENGINES
009-57801 9-57801 All 4 cyl., Inline 6 cyl. and V-8 Mercruiser 35-802885, 13/16” x 16 NPT(Short Canister) OMC 173232, 778864, (no/anti-drainback valve)
Chris Craft 16.81-08746,Crusader 201104,Indmar 50-1001,Pleasurecraft R077002,Volvo Penta 835440, 3850559
009-57803 9-57803 V-6 Mercruiser 35-883702K, 18mm x 1.5OMC 173834, 502903, (w/anti-drainback valve)Volvo Penta 841750
009-57811 9-57811 V-8 (Long Canister) Mercruiser 35-16595Q, 13/16" x 16 NPTOMC 173232, 502901 (no/anti-drainback valve)Volvo Penta 835440
009-57820 9-57820 Volvo Penta Cartridge Type Volvo Penta 8692305 N/A
ORDER NO. Mfr. No. Replaces Model OEM Part No. Application009-37800 9-37800 Mercury/Honda/Suzuki/Yamaha/Others 35-802893Q/35-807172 Bracket w/Short Canister009-37801 9-37801 Mercury/Yamaha 35-807172 Bracket w/Long Canister009-37803 9-37803 Johnson/Evinrude 502905 Bracket w/Standard Canister009-37804 9-37804 Johnson/Evinrude 502906/385121B2 Direct Injection 90-115HP 1998-Up,
150-225HP 1999-Up009-37805 9-37805 Mercury 35-18458Q3 V-6 EFI 1995-Earlier009-37806 9-37806 Mercury 35-18458Q4 V-6 EFI/DFI 1996-Newer009-37807 9-37807 Mercury/Yamaha/Others MAR-SEPAR-AR-OR Applications where extra filtering capacity is required009-37808 9-37808 Yamaha MAR-MINIF-IL-TR For use with Yamaha Mini Filter Bracket009-37810 9-37810 Racor Racor S3227 & S3228UL, For use with metal & plastic bowls,
Honda 17670-ZW1-801AH, fits Racor HeadSuzuki 99105-20005,Yamaha MAR-24563-00-00
009-37811 9-37811 Racor S3213 & S3220UL For use with metal & plastic bowls, fits filter bracket009-37812 9-37806 Racor Racor S3240, Suzuki 99105-20006 Fits: Racor multi-port 120RRAC01
Honda 17670-ZW1-030GH
• High efficiency filter media removesharmful particles from your engineoil to prevent premature wear ofinternal bearing and components
• High filtration capacity holds up to45% more dirt than another leadingnational brand.
• Engineered to meet or exceed allOEM specifications
Features at a Glance• New 10 Micron Rating for 009-37800 &009-37801 (required for many newer EFI &DFI Engines)
• Epoxy coated interior for superior interior corrosionprotection
• Premium quality filter media removes 98.8% ofemulsified water and contaminants
For more information see www.mallorymarine.com
WATER SEPARATING FUEL FILTERS
INBOARD/STERNDRIVE OIL FILTER APPLICATIONS - GASOLINE MODELS
• High flow capacity exceedsOEM specifications
• Will not remove 2 cycle oil from fuel• Not for use with Diesel Fuel• Not recommended for 4.3LMercruiser w/electric fuel pumps
WATER SEPARATING FUEL FILTERS/OIL FILTERS
![Page 14: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/14.jpg)
FUEL LINE ASSEMBLIES Top of the Line Innovation from Scepter• Assemblies use a compounded, tough & pliable UV-resistant hose, that promote maximum fuel flow.
• Includes fittings built to strict OEM specifications for replacement parts• Uses O-ring construction on all fittings for tight, leak-free connections• Clamshell packaging is consumer accepted with self-selling graphics!
906
615-33498-10Tank Connector
615-33496-10
3/8" I.D. HoseFuel Line Assemblyc/w Tank Fitting for Model Y91+
Order No. Mfr. No.
615-09478 09478Order No. Mfr. No. Description615-33496-10 05829 Male Tank Connector615-33498-10 05827 Female Engine & Tank Connector
Honda
Universal Fit End:Customize your fuel lineassembly to match theexisting connector on yourfuel tank!
615-33486-10Tank Connector
615-33477-10 615-33482-10Engine Connector
3/8" I.D. HoseClip Style Fuel Line Assembly;1998 & newer EnginesReplaces OEM No. 32-827927A
Order No. Mfr. No.
615-34385-10 07482Order No. Mfr. No. Description615-33477-10 05837 Male Tank Connector615-33486-10 05793 Female Tank Connector615-33482-10 05791 Female Engine Connector
On Tank On EngineIncludes: Includes:(Not included)
615-33421-10Tank Connector
080-94760 080-94760Engine Connector
3/8" I.D. HoseBayonet Style Fuel Line Assembly;Cast Aluminum FittingsReplaces OEM No. 32-80188A2
Order No. Mfr. No.
615-34388-10 07483
Order No. Mfr. No. Description615-33421-10 07497 Female Die Cast Bayonet080-94760 09746 Die Cast Bayonet Combo Pack
Includes:- 1/4 NPT Female Tank Fitting, 90° Elbow1/4 NPT - Female Tank Fitting3/8" Barb Female Engine Connector (1987 & Older)
Mercury
FUEL LINE ASSEMBLIESCOMPONENTS
Mercury
615-33481-10Tank Connector
615-33470-10 615-33481-10Engine Connector
3/8" I.D. HoseFuel Line AssemblyReplaces OEM No. 6Y2-24306-05-00
Order No. Mfr. No.
615-34394-10 07489
Order No. Mfr. No. Description615-33481-10 05815 Female Engine Connector615-33470-10 04075 Male Tank Connector
615-33480-10Tank Connector
615-33400-10 615-33480-10Engine Connector
Universal Fit End:Customize your fuelline assembly to matchthe existing connectoron your fuel tank!
Universal Fit End:Customize your fuelline assembly to matchthe existing connectoron your fuel tank!
3/8" I.D. Hose Bombardier(Johnson / Evinrude)Fuel Line AssemblyReplaces OEM No. 398549Order No. Mfr. No.
615-34391-10 07486
615-33389-10 12' Hose Length,Mfr. No. 07484 3/8" I.D.
615-34390-10 80' Hose LengthMfr. No. 07485 3/8" I.D.Replaces OEM No. J/E 176667/ 174513,Mercury 32-822379A
615-34395-10 80' Hose Length,Mfr. No. 07491 5/16" I.D.
UniversalTank Connector
UniversalEngine Connector
Order No. Mfr. No. Description615-33400-10 04068 Male Tank Connector615-33480-10 05822 Female Engine & Tank Connector
For more information see:www.sceptermarine.com
Universal
JohnsonEvinrude
Yamaha
080-94760 Pack
Keep your fuel lines operating at peakperformance to insure your outboardmotor runs smoothly. Scepter offers a
wide variety of OEM compatiblereplacement assemblies.
FUEL LINE ASSEMBLIES
![Page 15: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/15.jpg)
907
FUEL LINE CONNECTORS
Johnson / EvinrudeOrder No. Mfr. No. Description
615-33400-10 04068 1/4" NPT Brass Male Tank Connector
615-33410-10 05787 5/16" Barb Female Fuel Line Engine Connector
615-33480-10 05822 3/8" Barb Female Fuel Line Engine Connector
Mercury
Order No. Mfr. No. Description
615-33421-10 07497 3/8" Barb Male Die Cast Fuel Line TankConnector Bayonet Style
080-94760 09476 1/4" NPT Plastic Female Tank Fitting, 90˚Elbow, 1/4" NPT PlasticFemale Tank Fitting Connector Bayonet Style
615-33482-10 057913/8" Barb Female Fuel Line Engine Connector(Yamaha & Mercury) 1998 & Newer Style Engines;Large Two Prong Clip Style
615-33486-10 057933/8" Barb Plastic Female Fuel Line Tank Connector1998 & Newer Style Engine;Two Prong Clip Style
615-33477-10 05837 1/4" NPT Brass Male Tank Connector 1998 & Newer StyleEngines; Two Prong Clip Style
Honda
Order No. Mfr. No. Description
615-33496-10 05829 1/4" NPT Chrome Plated Brass Tank Connector
615-33497-10 05783 3/8" Barb Female Fuel Line Engine Connector
615-33498-10 05827 3/8" Barb Female Fuel Line Tank Connector
615-33501-10 05784 1/4" NPT Chrome Plated Brass Engine Size to 90 HP Male TankConnector
615-33502-10 05778 3/8" Barb Chrome Plated Brass Engine Size to 90 HP Female FuelAssembly Tank End Connector
615-33421-10
615-33497-10
615-33400-10615-33410-10615-33480-10
615-33501-10
615-33498-10615-33496-10
615-33502-10
= Tank Connector = Engine Connector
615-33477-10080-94760
615-33486-10
For more information see: www.sceptermarine.com
615-33482-10
YamahaOrder No. Mfr. No. Description
615-33470-10 04075 1/4" NPT Brass Male Tank Connector
615-33471-10 05813 5/16" Barb Female Fuel Line Engine Connector
615-33481-10 05815 3/8" Hose Barb Female Fuel Line Engine & Tank Connector
Suzuki
Order No. Mfr. No. Description
615-33463-10 04065 1/4" NPT Chrome Plated Brass Male Tank Connector- Small - Engines to 75 HP
615-33487-10 05785 3/8" Barb Chrome Plated Brass Female Engine Connector
615-33488-10 05779 3/8" Barb Chrome Plated Brass Female Engine Connector - Small
615-33470-10
615-33487-10
615-33481-10
615-33491-10
615-33471-10
Nissan / TohatsuOrder No. Mfr. No. Description
615-33491-10 07372 1/4" NPT Chrome Plated Brass Tank Connector
615-33492-10 05809 3/8" Barb Chrome Plated Brass Fuel Line Tank Connector
615-33488-10
615-33463-10
FUEL LINE ASSEMBLIES
![Page 16: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/16.jpg)
908
For more information see:www.teleflexmarine.com
�
�
918-80401FUEL
CONNECTOR
918-80403FUEL
CONNECTOR
018-8005S‘S’ SERIES
PRIMER BULB
918-80400TANK CONNECTOR
(SOLD SEPARATELY)
FUEL LINE ASSEMBLY COMPONENTSHonda Fuel Application: 8, 9.9, 15, 25, 30, 40, 50, 75, 90, 115, 130 HP (2001-2002)
9’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
3/8”FUEL LINE ASSEMBLY
� Discount shop pack of 10 - Priced per package� Will not interchange with OE 5/16” hose assemblies� Tanks and Engines for picture purpose only.
918-80400TANK CONNECTORReplaces: 16977-ZV5-A00Male tank outlet, new style,1/4"NPT, nickel plated brass.Male connector, for fuel tank.Mates with 918-80401
918-80401�FUEL CONNECTORFemale hose connector,new style, 3/8" hose
918-80406FUEL CONNECTORReplaces: 16977-ZV5-900Male tank outlet, old style,1/4" NPT.
918-80403�FUEL CONNECTORFemale 3/8 hose connector withrectangular locking post.For late model engine: For usewith our 918-81042 fuel hoseassembly, motor end.Mates with 918-80407
018-8005S018-800510S�PRIMER BULB3/8"Large capacity bulb
918-80420FUEL CONNECTORReplaces: 176560-921-003ZBFits: BF5/BF8A 2001 and earlier.Mates with 17710-881-00ZA
HONDA
918-81042S SILVERADO 4000Premium
Replaces 918-81042 Silverado 3000
OE# 17700-ZW9-01017700-ZW9-020
EPA/CARBCOMPLIANT HOSE
‘S’ SERIES COMPLETE FUEL LINE ASSEMBLIES
SILVERADO 4000 PREMIUM HOSEFeatures• Rubber fuel line with fabric reinforcement• Extremely low permeation• Meets EPA/CARB requirements• Weather resistant CPE cover• Flexible THV barrier layer• Extremely flexible and kink resistant in all weather conditions• Resistant to ethanol blend fuels• Meets SAE J1527 Type B1-15
PREMIUM PRIMER BULBS(‘S’ Series)• Advanced Nitrileconstruction
• Double Viton check valves• Rated for use in E10 andhigher ethanol fuels
• Competitively priced• Unique packaging
Sierra’s ‘S’ Series Fuel Line Assemblies include EPA/CARB compliant Silverado 4000 Premium hoseand ‘S’ Series non-EPA/CARB compliant primer bulbs.
918-80407FUEL CONNECTORReplaces: 17710-ZW9-0335/16” with interlocking post.Fits BF8-BF130 (2003).Mates with 918-80403 &918-80408
918-80408FUEL CONNECTORReplaces: 17650-ZW9-003Female 5/16" connector withrectangular locking post. Fits latemodel engines.Mates with 918-80407
NOTE: For EPA/CARB compliant Fuel Assemblies please see Sierra Catalog
COMPLETE FUEL LINE ASSEMBLIES
![Page 17: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/17.jpg)
909
For more information see:www.teleflexmarine.com
�
�
018-80740HOSE BARB
(SOLD SEPARATELY)
8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
JOHNSON/EVINRUDE
018-8004S018-800410S�
PRIMER BULB5/16"Replaces: 174511, 775638Large capacity bulb
018-8005S018-800510S�
PRIMER BULB3/8"Replaces: 174512Large capacity bulb
018-80630018-806310�
TANK CONNECTORReplaces: 502867, 772681(1/4" NPT)Mates with 018-80920 &018-80560
018-80560018-805610�
FUEL CONNECTOR5/16"Replaces: 174508, 775640Mates with 018-80630
018-80920FUEL CONNECTOR3/8"Replaces: 176445, 775641Mates with 018-80630
018-80720FUEL ELBOW3/8" Barb w/ 3/8" NPT ThreadReplaces: 17417790°
FUEL LINE ASSEMBLY COMPONENTSFits: All V8, 1984 & later V6, 1985 & later 120 HP, 140 HP Outboards, 2 HP (1 cyl.) - 75 HP (3 cyl.) (1976-2002)
018-80920FUEL
CONNECTOR
FUEL LINE ASSEMBLY COMPONENTSFits: All V6 & V8 (1976-2002)
018-8005S‘S’ SERIES
PRIMER BULB
8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
� Discount shop pack of 10 - Priced per package � Tanks and Engines for picture purpose only.
018-80550 173311 5/16" 1/4" Male018-80740 173312 3/8" 1/4" Male
HOSE BARB APPLICATIONORDER NO. OMC Barb NPT Conn.
O.E.# Type
018-8014S SILVERADO 4000 PremiumReplaces 018-8014EP Silverado 3000
OE# 174509
EPA/CARBCOMPLIANT HOSE
NOTE: For EPA/CARB compliant Fuel Assemblies please see Sierra Catalog
‘S’ SERIES COMPLETE FUEL LINE ASSEMBLIES (Continued)
3/8”FUEL LINE ASSEMBLY
018-80920FUEL
CONNECTOR
018-80920FUEL
CONNECTOR
018-8005S‘S’ SERIES
PRIMER BULB�
�
018-80630TANK CONNECTOR
(SOLD SEPARATELY)
3/8” High FlowFUEL LINE ASSEMBLY
018-8009S SILVERADO 4000 PremiumReplaces 018-8009EP Silverado 3000
OE# 398549
EPA/CARBCOMPLIANT HOSE
COMPLETE FUEL LINE ASSEMBLIES
![Page 18: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/18.jpg)
910For more information see: www.teleflexmarine.com
OE# 32-858109Q12,32-858109K12
018-80760FUEL
CONNECTOR
018-80910FUEL
CONNECTOR
018-8005S‘S’ Series
PRIMER BULB�FUEL LINE ASSEMBLY COMPONENTS
Has double sealed quick connect type fitting on tank end and clip-on type quick connect on engine end. Fits: Force 40 HP and larger (1993 &Newer), Force 9.9/15/25 HP (1998) and all Mercury Mariner outboards using clip-on type disconnects at both tank and engine ends.
018-80690FUEL CONNECTOR5/16"Replaces: 22831Q3, 22831A3(Female)
018-80700FUEL CONNECTOR5/16"Replaces: 30185A3, 30185Q3(Female)
018-80680TANK CONNECTOR(1/4" NPT)(Female)
018-80750FUEL CONNECTOR(1/4")Replaces: 22-14213M,2214213Q (Male)Mates with 018-80771
018-8004S018-800410S�PRIMER BULB5/16"Replaces: 89396A38,89396Q8Large capacity bulb
018-44620TANK ADAPTER(Clip Style Fitting)For: Mercury/Mariner(Female Twist-on)
918-80402TANK
CONNECTOR(SOLD SEPARATELY)
� Discount shop pack of 10 - Priced per package� Tanks and Engines for picture purpose only.
018-8005S018-800510S�PRIMER BULB3/8"Replaces: 13330A3,13330Q, 13330Q5Large capacity bulb
�
MERCURY/MARINER
018-80540 22-63186 5/16" 1/8" Male018-80550 22-63187 5/16" 1/4" Male018-80730 - 3/8" 1/8" Male018-80740 - 3/8" 1/4" Male
HOSE BARB APPLICATIONORDER NO. OMC Barb NPT Conn.
O.E.# Type
�018-80830
FUELCONNECTOR
018-80840FUEL
CONNECTOR
018-8005S‘S’ Series
PRIMER BULB�
018-80680018-80820
TANK CONNECTOR(SOLD SEPARATELY)
3/8"FUEL LINE ASSEMBLY
FUEL LINE ASSEMBLY COMPONENTS
EPA/CARBCOMPLIANT HOSE
‘S’ SERIES COMPLETE FUEL LINE ASSEMBLIES (Continued)
8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
018-8010S SILVERADO 4000 PremiumReplaces 018-8010EP Silverado 3000
8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
018-8016S SILVERADO 4000 PremiumReplaces 018-8016EP Silverado 3000
3/8"FUEL LINE ASSEMBLY
EPA/CARBCOMPLIANT HOSE
NOTE: For EPA/CARB compliant Fuel Assemblies please see Sierra Catalog
COMPLETE FUEL LINE ASSEMBLIES
![Page 19: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/19.jpg)
911For more information see: www.teleflexmarine.com
‘S’ SERIES COMPLETE FUEL LINE ASSEMBLIES (Continued)
018-80910FUEL CONNECTOR
Replaces: 22-13563Q7,22-13563T7
Mates with 918-80402
018-80850018-808510�
FUEL CONNECTOR(5/16")
Mates with 018-80771
918-80402TANK CONNECTOR
1/4" NPTMates with 018-80910
018-80820TANK CONNECTOR
(1/4” NPT)(Female)
018-80771018-8077-1-10�
TANK CONNECTORReplaces: 502867, 772681
(1/4” NPT)Mates with 018-80750,018-80760 & 018-80850
018-80760018-807610�
FUEL CONNECTOR(3/8")
Replaces: 22-13563A3,22-13563Q3
Mates with 018-80771
018-80830FUEL CONNECTOR
3/8"(Female)
MERCURY/MARINER (CONTINUED)
� Discount shop pack of 10 - Priced per package� Tanks and Engines for picture purpose only.
918-80410FUEL CONNECTOR
Replaces : 22-13563T35/16” (Female)
Fits: 4/5 2-Stroke (1999 & Up)Mates with 918-80412
018-80840FUEL CONNECTOR
3/8"Replaces: 30185Q3
(Male)
918-80412FUEL CONNECTOR
Replaces: 22-816856T25/16” (Male)
Fits: 100 4-cyl. (1988-99),115 4-cyl. (1989 & Up), 1254-cyl. (1994 & Up), 65 Jet
(1994 & Up), 75 3-cyl. (1987& Up), 80 Jet (1994 & Up),
90 3 cyl. (1987 & Up)Mates with 918-80412
NOTE: For EPA/CARB compliant Fuel Assemblies please see Sierra Catalog
COMPLETE FUEL LINE ASSEMBLIES
![Page 20: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/20.jpg)
912For more information see: www.teleflexmarine.com
918-80414FUEL CONNECTOR(5/16”)Replaces: 6G1-24305-05-00, 6G1-24305-04Fits: 6 (1989, 1992-93), 8 (1984-85, 1989-93, 2001-02, 909 (1984-93, 2000-03), 15 (1984-93,2000-03), 25 (1984-85), 1988-93, 2000-03), 30 (1984-87, 1989-93, 1999, (2001-02),40 (1984-86, 1988-90, 1992-93. 2000-03), 50 (1986-93, 2000-03), 60 (2001-03),70 (1984-93, 2000-03), 90 (1984-93, 2000-03), C25 (1991, 1993), C30 (1991-93),C40 (1991-93, 2000-02), C50 (2000-01), C55 (1991-93), C60 (2000-01), C70 (2000-01), C85(1991-93), C90 (2000-01), E48 (2000), F6 (2001-03), F8 (2001-03), F9.9 (1985-93,2001-03), F15 (1998-99, 2000-01), F25 (1998-99, 2000-03), F30 (2001-03), F40 (1999,2000-03), F50 (1999, 2000-03), F69 (2002-03), T9.9 (1991-93, 1999, 2001-03),T25 (2001-03), T50 (1999, 2000-03), T60 (2003)Mates with 018-80771
918-80415FUEL
CONNECTOR
918-80415FUEL
CONNECTOR
018-8005S‘S’ SERIES
PRIMER BULB�
3/8"FUEL LINE ASSEMBLY
�
018-80400FUEL TANK ELBOWUniversal Fitting with1/4" NPT ThreadsReplaces: ABA-FBARB-90-DG(Brass)
018-44620TANK ADAPTER(Clip Style Fitting)(Female Twist-on)
OE# 6YL-24306-60-00
FUEL LINE ASSEMBLY COMPONENTSFits: F75-F250 and 115-300 HP
8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
018-8017S SILVERADO 4000 PremiumReplaces 018-80 17EP Silverado 3000
YAMAHA‘S’ SERIES COMPLETE FUEL LINE ASSEMBLIES (Continued)
EPA/CARBCOMPLIANT HOSE
018-8005S018-800510S�PRIMER BULB3/8"Large capacity bulb
018-80771018-8077-1-10�TANK CONNECTOR(1/4” NPT)Mates with 918-80413, 918-80414& 918- 80415
918-80415FUEL CONNECTOR(3/8”)Replaces: 6E5-24305-05,Mates with 018-80771
918-80413FUEL CONNECTOR(1/4”)Replaces: 6Y1-24305-04Mates with 018-80771
018-80550HOSE BARB1/4” NPT threads for connectionof 5/16” I.D. hose.Replaces: ABA-FLINE-BA-RB(Brass)
� Discount shop pack of 10 - Priced per package� Tanks and Engines for picture purpose only.
018-80771TANK
CONNECTOR(SOLD SEPARATELY)
NOTE: For EPA/CARB compliant Fuel Assemblies please see Sierra Catalog
COMPLETE FUEL LINE ASSEMBLIES
![Page 21: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/21.jpg)
913For more information see: www.teleflexmarine.com
EPA/CARBCOMPLIANT HOSE
018-80410 — — 5/8" 3/8" Male018-80420 — — 1/4" 1/4" Male018-80430 — — 1/4" 1/8" Male018-80540 22-63186 — 5/16" 1/8" Male018-80550 22-63187 — 5/16" 1/4" Male018-80730 — — 3/8" 1/8" Male018-80740 — 173312 3/8" 1/4" Male018-80930 — — 1/4" 1/4" Female018-80940 — — 5/16" 1/4" Female018-80950 — — 3/8" 1/4" Female018-81080 — — 3/8" 3/8" Male018-81090 — — 5/16" 3/8" Male
Mercury OMC Conn.ORDER NO. O.E. # O.E. # Barb NPT Type
�
�
5/16"FUEL LINE ASSEMBLY
FUEL LINE ASSEMBLY COMPONENTS
018-8004S‘S’ SERIES PRIMER BULB
‘S’ SERIES COMPLETE FUEL LINE ASSEMBLIES (Continued)
UNIVERSAL8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
018-8013S SILVERADO 4000 PremiumReplaces 018-8013EP Silverado 3000
EPA/CARBCOMPLIANT HOSE
�
�
3/8"FUEL LINE ASSEMBLY
FUEL LINE ASSEMBLY COMPONENTS
018-8005S‘S’ SERIES PRIMER BULB
8’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
018-8015S SILVERADO 4000 PremiumReplaces 018-8015EP Silverado 3000
EPA/CARBCOMPLIANT HOSE
�
�
5/16"FUEL LINE ASSEMBLY
FUEL LINE ASSEMBLY COMPONENTS
018-8004S‘S’ SERIES PRIMER BULB
12’ LENGTH COMPLETE FUEL LINE ASSEMBLIES
018-8032S SILVERADO 4000 PremiumReplaces 018-8032EP Silverado 3000
� Tanks and Engines for picture purpose only.
Hose Barb Application
Hose Barb
NOTE: For EPA/CARB compliant Fuel Assemblies please see Sierra Catalog
COMPLETE FUEL LINE ASSEMBLIES
![Page 22: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/22.jpg)
914For more information see: www.teleflexmarine.com
018-42560PIPE PLUG1/4” Threads
018-42640PIPE PLUG3/8” Threads
018-80470FUEL TANK ELBOW1/4” NPT Threads90°
018-80460FUEL TANK ELBOW1/8” NPT x 1/4” NPT90°
018-80450REDUCING NIPPLEFITTING1/8” x 1/4” NPT HEX
018-80820TANK CONNECTORMercury StraightFitting(1/4” NPT)(Female)
018-80900TANK CONNECTOR(1/4” NPT)
018-8002SPRIMER BULB1/4” I.D.
918-80402TANK CONNECTOR1/4” NPTUse with 018-80910
018-80670018-81109 (12/Pk)FUEL TANK ELBOW1/4” NPT Threads90°
@Have a Technical Question?
Contact our Technical Support Staffemail: [email protected]
FUEL FITTINGS
![Page 23: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/23.jpg)
915
Scepter Primer Bulbs feature gasoline and solvent-resistantconstruction, stainless steel clamps, and dual internal checkvalves to ensure a more rapid prime while preventing fuel flow back
Order No. Mfr. No. Description615-34790-10 07813 Primer Bulb - 1/4" Hose Barbs615-34590-10 05869 Primer Bulb - 3/8" Hose Barbs615-34690-10 07494 Primer Bulb - 5/16" Hose Barbs
PRIMER BULBS
MAXIMUM FLOWfor Improved Engine Performance
For more information see: www.attwoodmarine.com
PRIMER BULB• Connections engineered for strength, durability and leak resistance• Low-permeation, fiber-reinforced hose• High-strength, low permeation bulb and hose resist collapse in extreme temperatures• High-flow check valves ensure proper engine performance
ORDER NO. Mfr. No. Description919-30387 9303817 Primer Bulb, 3/8"
ORDER NO. Mfr. No. Description919-3806H7 93806HI7 Fuel Line, 6' x 3/8" Honda Kit919-3806U7 93806UI7 Fuel Line, 6' x 3/8" Universal Kit919-3806Y7 93806YI7 Fuel Line, 6' x 3/8" Yamaha Kit919-3806E7 93806EI7 Fuel Line, 6' x 3/8" Johnson/Evinrude Kit919-3806A7 93806AI7 Fuel Line, 6' x 3/8" Mercury (Pre 1998) Kit919-3806M7 93806MI7 Fuel Line, 6' x 3/8" Mercury Snap Lock Kit
FUEL LINE KITSNew low permeation fuel line kits meet all EPA requirements.A re-engineered primer bulb along with new barbs and steplessclamps add strength and leak resistance.EPA certified compliant hose. EPA certified fuel line. Ethanol compatible.• EPA/CARB Certified• Include LP Primer Bulb• All kits include Attwood’s exclusive Universal Sprayless Connector• High-flow check valves ensure proper engine performance Johnson / Evinrude
Yamaha
For more information see www.sceptermarine.com
UNIVERSAL SPRAYLESS CONNECTORThe Universal Sprayless Connector is a safe way to eliminate the spraying of fuel whenconnecting and disconnecting pressurized fuel hoses during fueling or maintenance.Includes male and female connectors for use with all standard marine fuel tanks– ¼" in (6.4mm) NPT fittings. (Always use threaded sealant.)
• High-strength check valves seal automatically when disconnected• Eliminates the need to purchase expensive brass tank fittings• Convenient one-button release, user-friendly single hand operationwithout the risk of fuel spray
• Compatible with Ethanol blended fuels
ORDER NO. Mfr. No.919-3806U-17 93806UUSi7
FUEL LINE KITUNIVERSAL FUEL LINEUniversal 6', 3/8" diameter fuel line.Kit includes universal sprayless connector. (108-88386) Mfr. No. 8838US6
ORDER NO. Mfr. No.108-88386 8838US6
FUEL LINE ACCESSORIES
![Page 24: CC Marine 2013-14 Catalogue_Fuel System](https://reader031.fdocuments.net/reader031/viewer/2022012316/55cf9d39550346d033acc06d/html5/thumbnails/24.jpg)
916
FUEL FILTERS/CONNECTORS/VALVES/VENT
Order No. Description615-33801-10 3/8" Barb, 1/4NPT615-33802-10 3/8" Barb, 3/8NPT
Order No. Description615-515002-10 Teflon Tape
Order No. Description615-33201-10 90º Elbow Chrome Plated Brass Thru Hull
Vent Accommodates 5/8” I.D. Vent Hose615-35732-10 Thru Hull Vent for Hulls up to 1/2" thick,
Accomodates 5/8" Vent Hose
FUEL FILTERSMoeller’s In-Line Disposable Fuel Filterstrap dirt and other metallic particles.The design allows for immediateinspection of your fuel conditionwith clear vial.10 Micron filtration
Not for use on Inboard Engines!CONNECTORSMake the Right ConnectionFrom brass to aluminum, menders to elbows - connect with Moellerquality, OEM fuel connectors for your permanent fuel tank requirements.
VALVESGet More, Save More with Moeller Quality
Constructed of brass, these Moeller must-have valves meet ABYC H-24 requirements and provide anti-siphon protection.Choose Moeller for all your valve needs.
THREE-WAY VALVE• Connects (2) permanent tanks to a single motorOrder No. Description615-33305-10 1/4 FNPT BrassThree-Way Valve-Click615-33312-10 3/8 FNPT Brass Three-Way Valve
SHUT-OFF VALVE• Constructed of brass• Meets ABYC H-24 requirements• Provides anti-siphon protectionOrder No. Description615-33303-10 1/4 FNPT Female/Female
Brass Shut-Off
FOUR-WAY VALVE• Connects (3) permanent tanks to a single motorOrder No. Description615-33304-10 1/4 FNPT Brass Four- Way Valve
ALUMINUM ANTI-SIPHON VALVES• Delivers Coast Guard/ industry standardanti-siphon protection on all gasoline-powered boats• Combines anti-siphon protection with aconvenient hose barb design• Made of tough aluminum• Features 1/4 NPT threads
VENT• Features durable chrome platedbrass construction• Vent hose to the fuel tankfor thru-hull ventilation
BRASS HOSE MENDERS
Order No. Mfr. No. Description
615-33211-10 07196 1/4” Hose Menders
615-33212-10 07197 5/16” Hose Menders
615-33213-10 07198 3/8” Hose Menders
BRASS HOSE BARBS / MALE THREAD
Order No. Mfr. No. Description
615-33405-10 07204 1/4 NPT X 3/8” Brass Barb
615-33430-10 07207 1/4 NPT X 5/16” Brass Barb
FUEL FITTINGS
Order No. Mfr. No. Description
615-33403-10 07203 1/4 NPT Male Brass Nipple
ELBOWS
Order No. Mfr. No. Description
615-33206-10 07199 Male/Female 3/8 NPT Brass Elbow
ALUMINUM HOSE BARBS / MALE THREAD
Order No. Mfr. No. Description
615-33442-10 07215 1/4 NPT X 3/8” Alum. Hose Barb
BRASS HOSE BARBS / FEMALE THREAD
Order No. Mfr. No. Description
615-33478-10 07219 1/4 NPT X 3/8” Brass Hose Barb
BULKHEAD FITTINGS
Order No. Mfr. No. Description
615-33210-10 07200 Straight 3/8" Brass Bulkhead
615-33801-10
615-33201-10615-35732-10
615-33802-10
TEFLON TAPE
For more information see www.sceptermarine.com
Order No. Mfr. No. Description615-33316-10 07481 Disposable In-line Fuel Filter with 5/16” Barb615-33317-10 07480 Disposable In-line Fuel Filter with 3/8” Barb
Protect Your investment with onlyMoeller-Brand Fuel Filters