castpremixpackage_for_grc
1
Avonmouth Way, Avonmouth, Bristol. BS11 9YA : +44 (0)117 9820067 Fax: +44 (0)117 9820060 [email protected] www.power-sprays.co.uk SPECIALIST MIXING, PUMPING & SPRAYING MACHINERY MANUFACTURERS FOR GRC Power-Sprays Ltd is a member of the International Glass fibre Reinforced Concrete Association CAST PREMIX GRC Power-Sprays Glass fibre Reinforced Concrete manufacturing equipment is used by GRC producers in over 80 countries. CAST PREMIX GRC is growing in popularity. A typical set of equipment comprises: GRC125 Combination Mixers Premix GRC is based on a high strength low water/cement ratio mortar. This is prepared at high speed. The Alkali Resistant Glass fibre reinforcement is then blended into the mortar at slow speed. Power-Sprays build a range of Premix Mixers from manual to fully automated batching systems. Automated Water & Admixture Dispensing Systems Accurate control of water and admixtures is essential for good quality control Single Roving Electric Glass Fibre Chopper Can be used to cut chopped strand from A.R. Roving. The timing system allows batches of known weight to be produced eliminating the need for weighing. Vibrating Tables Power-Sprays construct a range of Vibrating Tables specifically designed for Premix GRC. Tables are fitted with adjustable amplitude vibrators with the option of variable frequency control systems to ensure efficient compaction. Hand Tools and Accessories Power-Sprays supplies a complete range of specialist hand tools and accessories.
-
Upload
powersprays -
Category
Documents
-
view
213 -
download
0
description
Â
Transcript of castpremixpackage_for_grc
Avonmouth Way, Avonmouth, Bristol. BS11 9YA : +44 (0)117 9820067 Fax: +44 (0)117 9820060 [email protected] www.power-sprays.co.uk
SPECIALIST MIXING, PUMPING & SPRAYING MACHINERY MANUFACTURERS FOR GRC
Power-Sprays Ltd is a member of the International Glass fibre Reinforced Concrete Association
CAST PREMIX GRC
Power-Sprays Glass fibre Reinforced Concrete manufacturing equipment is used by GRC producers in over 80 countries. CAST PREMIX GRC is growing in popularity.
A typical set of equipment comprises:
GRC125 Combination Mixers Premix GRC is based on a high strength low water/cement ratio mortar. This is prepared at high speed. The Alkali Resistant Glass fibre reinforcement is then blended into the mortar at slow speed. Power-Sprays build a range of Premix Mixers from manual to fully automated batching systems.
Automated Water & Admixture Dispensing Systems Accurate control of water and admixtures is essential for good quality control
Single Roving Electric Glass Fibre Chopper Can be used to cut chopped strand from A.R. Roving. The timing system allows batches of known weight to be produced eliminating the need for weighing.
Vibrating Tables Power-Sprays construct a range of Vibrating Tables specifically designed for Premix GRC. Tables are fitted with adjustable amplitude vibrators with the option of variable frequency control systems to ensure efficient compaction.
Hand Tools and Accessories
Power-Sprays supplies a complete range of specialist hand tools and accessories.
