BVP CET B.Tech Brochure 2016
-
Upload
mota-chashma -
Category
Documents
-
view
227 -
download
0
Transcript of BVP CET B.Tech Brochure 2016
-
7/25/2019 BVP CET B.Tech Brochure 2016
1/58
AtAt
Bharati Vidyapeeth Deemed UniversityBharati Vidyapeeth Deemed University
COLLEGE OF ENGINEERING, PUNE-43
www.bvucoepune.edu.in)
COLLEGE OF ENGINEERING, PUNE-43
(www.bvucoepune.edu.in)
INFORMATION BROCHURE AND APPLICATION FORM OF ENTRANCE TEST
BACHELOR OF TECHNOLOGY COURSES
For Admission to the
BACHELOR OF TECHNOLOGY COURSES
B.TEC H. 2016B.TECH.- 2016
-
7/25/2019 BVP CET B.Tech Brochure 2016
2/58
-
7/25/2019 BVP CET B.Tech Brochure 2016
3/58
As the Chancellor of Bharati Vidyapeeth University that it has been awarded a prestigious 'A' grade by
I extend a very warm welcome to the students who the NAAC both in its first accreditation and also inare desirous of seeking admissions in our different reaccreditation. An approval by the UGC under
Constituent units. Section 12B of its Act which our University has
received by another feather in the cap of theBharati Vidyapeeth, the parent organization
University.of this University, celebrated last year as its Golden
Jubilee Year. The celebration concluded on 25th of We at this University are committed to make
June 2015 at a grand ceremony at the auspicious available to our students a wide spectrum of
hands of Honorable Pranab Mukharjee, the academic options to choose from.
president of India. At this moment my mind goesIt has also been our endeavour to provide
back over a period of five decades. Bharaticontinuously updated education in a congenial
Vidyapeeth initiated its academic journey with a environment to our students. I am very happy that asingle school. Now it is one of the premier
very large number of our past students haveeducational institutions in the country, having
established their reputation as Medicalunder its umbrella more that 180 educational units
Practitioners, Engineers, Pharmacy Industrialistsincluding 80 colleges with 12 faculties. They
and the like not only at the national level but also atinclude colleges of Medicine, Dentistry,
the international level. Research is a focal area ofEngineering, Pharmacy, Hotel Management and
activities of our University. We have three Researchthe like. There may not be any disciplines either
Institutes as constituent units of University. Theyconventional or emerging for which Bharati
are doing remarkable work. However, our aim is toVidyapeeth has not established its institution.
develop this University as a Research University.
Within a short period of 20 years or so,I again welcome all of you and wish you a
Bharati Vidyapeeth University has established itsvery successful academic career as students of this
academic reputation even across the nationalUniversity.
borders. Its high level of academic excellence is
underscored by the fact that the Ministry of Human
Resource Development, Government of India has
given 'A' grade status to this University. The
University's another remarkable achievement is
Hon'ble Dr. Patangrao Kadam
M .A., LL.B., Ph.D.
FO UN DER - C HAN C ELLO R
Dr. Patangrao Kadam
From the Chancelor s OfficeFrom the Chancellor's Office
1
-
7/25/2019 BVP CET B.Tech Brochure 2016
4/58
2
-
7/25/2019 BVP CET B.Tech Brochure 2016
5/58
Bharati Vidyapeeth
Deemed University, Pune (India)
3
At a glance
GRADE AWARDED BY GOVT. OF INDIA
GRADE REACCREDITATION BY NAACA
A Last date for submission of application
form to Bharati Vidyapeeth University Up to 17.00 hrs
C.E.T. Dept., Second Floor, L.B.S. Marg,
Pune 411 030
B Date and time of Examination
From 11.00 to 14.00 hrs
C Date of declaration of result
D Dates of counselling
E Classes will commence from
F Examination Centers :
Pune New Delhi
Navi Mumbai Hyderabad
Vadodara Indore
Lucknow Bangalore
th16 May 2016
nd22 May 2016
th06 June 2016
th19 July 2016
Da te Ti m eCandidates cal led for Counsel l ing
25-06-16 M erit N o. 001 to 14 0 1 0 . 00 a.m . onw ards
20-6-2016
21-6-2016
22-6-2016
23-6-2016
24-6-2016
Merit No. above 5001 should see University/College website for vacancy status.
Da te Ti m eCandida tes cal led for Counsel l ing
27-6-2016
28-6-2016
29-6-2016
OCI /
-
7/25/2019 BVP CET B.Tech Brochure 2016
6/58
4
Examination Centers
PUNE
NEW DELHI
NAVI MUMBAI
HYDERABAD
VADODARA
INDORE
LUCKNOW
BANGALORE
Visit www.bvucoepune.edu.infor latest information and admission updates
& vacancy positions during counselling period.
-
7/25/2019 BVP CET B.Tech Brochure 2016
7/58
Dear Students,
At the outset, let me welcome all of you who are
intending to join our University.
I am extremely happy to note that you have selected
our University for your further studies. All of you know
that Bharati Vidyapeeth University is one of the leading
Universities in the country having A grade awarded by
Ministry of Human Resource Development, Government
of India.
It is also accredited with prestigious A grade in
2004 and reaccredited with A grade in 2011 by the
NAAC, Bangalore. It is also significant to note that some
of its constituent units have ISO 2001-2009 cert ification.Our University has excellent infrastructure for all its
constituent Institutions such as well-structured spacious
buildings, continuously updated laboratories and hostels
with all necessary amenities and facilities.
Today, the horizons of knowledge are expanding
exponentially. It is, therefore, a challenge to cope up with
this vibrant system of higher education and Bharati
Vidyapeeth University is well-equipped to impart latest
training and education to its students. We are committedto provide excellent teaching, learning and research under
our 12 faculties. The University continuously updates the
courses of studies being taught in our constituent
Institutions, keeping in view, the rapid changes and
dynamism around. Our libraries are continuously updated.
The University ensures not only high quality training,
education in the respective areas of knowledge to the
students, but also places emphasis on all-round
development of the students. Abundant opportunities are
also provided for co-curricular and extracurricularactivities on the campus. In the discharge of its social
obligations, the University is, no doubt, committed to see
that the students graduating from this University are well-
trained and well-prepared for jobs and become responsible
citizens of the country.
The track record of the achievements of the
University is indeed commendable. It is a matter of pride
for us that scores of our students have achieved successes in
their respective fields and established themselves in
different spheres of life. We are aware that the success of
any University largely depends on the number of successful
students, i t produces for the service of the society and the
nation.
We, therefore, take every care for your bright future
career and help you to translate your dreams into reality.
Once again, I take this opportunity to welcome all of
you to the family of Bharati Vidyapeeth University and
wish you success in your life.
From the Desk of V ice hancellorFrom the Desk of Vice Chancellor
Prof. Dr. Shivajirao Kadam
VIC E C H AN C ELLO R
5
Prof. Dr. Shivajirao Kadam
-
7/25/2019 BVP CET B.Tech Brochure 2016
8/58
11. BVD U C ollege of Physical Education, Pune.12. BVD U Institute of Environm ent Education &
Research, Pune
13. BV D U Institute o f M an ag em ent &
Entrepreneurship D evelopm ent, Pune
14. BVD U Poona C ollege of Pharm acy, Pune
15. BVD U C ollege of Engineering, Pune
16. BVD U Interactive Research School in H ealth
Affairs (IRSH A), Pune
17. BVD U Rajiv G andhi Institute of Inform ation
Technology & Biotechnology, Pune
18. BVD U C ollege of Architecture, Pune
19. B V D U A b hijit K a d a m Institute o f
M anagem ent & Social Sciences, Solapur
20. BVD U Institute of M anagem ent, Kolhapur
21. BVD U Institute of M anagem ent & Rural
D evelopm ent adm inistration, Sangli
22. BVD U Institute of M anagem ent & Research,N ew D elhi
6
Bharati Vidyapeeth, the parent organizationof this U niversity is one of the largest educational
organizations in the country. It has 171
educational units under its um brella including 67
C olleges and Institutes of conventional and
professional education.
The D epartm ent of H um an Resource
D evelopm ent, G overnm ent of India on the
recom m endations of the U niversity G rants
C om m ission accorded the status of "D eem ed to
be U niversity" initially to a cluster of 12 units of
Bharati Vidyapeeth. Subsequently, 17 additional
colleges / institutes were brought w ithin the am bit
of Bharati Vidyapeeth D eem ed U niversity wide
various notifications of the G overnm ent of India.
Bharati Vidyap eeth D eem ed U niversity
com m enced its functioning on 26th April, 1996.
Constituent Units of BharatiVidyapeeth Deemed University
1. BVD U M edical C ollege, Pune.
2. BVD U D ental C ollege & H ospital, Pune
3. BVD U C ollege of Ayurved, Pune
4. BVD U H om oeopathic M edical C ollege, Pune
5. BVD U C ollege of N ursing, Pune
6. BVD U Yashw antrao M ohite C ollege of Arts,
Science & C om m erce, Pune.
7. BVD U N ew Law C ollege, Pune8. BVD U Social Sciences C entre (M .S.W .), Pune
9. BVD U Yashw antrao C havan Institute of Social
Science Studies & Research, Pune.
10. BVD U C entre for Research & D evelopm ent in
Pharm aceutical Sciences & A pplied
C hem istry, Pune
Bharati Vidyapeeth Deemed University, Pune
-
7/25/2019 BVP CET B.Tech Brochure 2016
9/58
-
7/25/2019 BVP CET B.Tech Brochure 2016
10/58
8
U niversity. It now conducts in all 305 courses in
its constituent units, of them 108 are Post
G raduate, 45 are U nder G raduate and 55D iplom a level courses. 12 Fellow ship and 5
certificate courses. All the professional courses
w hich the U niversity conducts such as those of
M edicine, D entistry, Engineering etc., have
approval of the respective statutory councils, viz.,
M edical C ouncil of India, D ental C ouncil of India,
All India C ouncil for Technical Education etc.
The U niversity is a throbbing center of
research activities and has launched Ph.D.
program m es in 77 subjects and M .Phil in 3
subjects. It has also introduced quite few
innovative academ ic program m es such as
M asters in C linical O ptom etry, M .Tech. in N ano
Technology etc.
Th e U niversity's pe rfo rm a nce and
achievem ents were assessed by the "N ational
Assessm ent and Accreditation C ouncil" and it was
reaccredited w ith a prestigious "A" grade in 2011.
Som e program m es of the constituent units such asC ollege of Engineering at Pune, M anagem ent
Institute in D elhi and others have also been
accredited by "N ational Board of Accreditation".
Three constituent units of Bharati Vidyapeeth
D eem ed U niversity are also the recipients of ISO
9001-2001 certifications.
23. BVD U Institute of H otel M anagem ent &
C atering Technology, Pune
24. BVD U Yashw antrao M ohite Institute of
M anagem ent, M alakapur-Karad
25. BVD U M edical C ollege & H ospital, Sangli
26. BVD U D ental C ollege & H ospital, M um bai
27. BVD U D ental C ollege & H ospital, Sangli
28. BVD U C ollege of N ursing, Sangli
29. BVD U C ollege of N ursing, N avi M um bai
The status of U niversity was given to a cluster
of these colleges and institutes in appreciation ofthe high level of their academ ic excellence and for
their potential for further growth.
D uring the last 20 years or so, the U niversity
has achieved higher pinnacles of academ ic
excellence and has established its reputation to
such an extent that it attracts students not only
from various parts of India but also from abroad.
According to a survey conducted by Association of
Indian U niversities, this U niversity is one am ong
the top ten U niversities in the country preferred by
the overseas students for adm issions. At present,
there are m ore than 850 overseas students from
47 countries on the rolls of constituent units of this
U niversity.
D uring the last 20 years, there has been
trem endo us academ ic expansion of the
-
7/25/2019 BVP CET B.Tech Brochure 2016
11/58
The University
Is one of the largest U niversities in term s of
C onstituent U nits established u/s. 3 of the
U G C Act, 1956.
Is a m ulti-faculty U niversity with Twelve
Faculties : (1) Arts, Social Sciences and
C om m erce, (2) Science, (3) Law, (4) M edical
Sciences, (5) D entistry, (6) Ayurveda, (7)
H o m o eo p a thy, (8 ) N u rsing , (9 )
Pharm aceutical Sciences, (10) M anagem ent
Studies (11) Engineering and Technology, (12)
Interdisciplinary Studies
O ffers a w ide range of academ ic program m es
to th e stu d en ts. Th e n u m b er o f
U ndergraduate, Postgraduate, and D iplom a
Program m es are 44, 104, 37 respectively.
Accredited by the N AAC with prestigious 'A'
grade (2004) and reaccredited w ith 'A'
grade(2011).
Is according to a survey conducted by theAssociation of Indian U niversities, N ew D elhi,
am ong the top ten universities and preferred
by the overseas students for adm issions.
D uring the year 2009-10 there are 800
overseas students from 32 countries enrolled
w ith constituent units.
H as eight cam puses located in different cities
including N ew D elhi.
Is probably the only U niversity having three
self-financing research institutes devotedexclusively for researches in health related
sciences, pharm aceutical sciences and social
sciences.
H as established a separate Sports D epartm ent
to prom ote sports activities.
H as established a C entre for Perform ing Arts,
which runs graduate program m es in various
perform ing arts including dance, dram a,
The U niversity has been awarded AG rade by
M inistry of H um an Resources G ovt. of India.
m usic.
Three C onstituent U nits of the U niversity are
assessed by the N ationa l Board of
Accreditation and are accredited w ith
prestigious grades.
Its three C onstituent U nits have also obtained
ISO 2001-2009 certification.
H as organized several international and
national level Sem inars, C onferences, etc.
Is a U niversity which academ ically and
intellectually very productive whose faculty
m em bers have very laudable record of
research publications and patents.
H as digitalized libraries of its constituent units.
H as created excellent infrastructure for all its
constituent units, including w ell structured
specious buildings continuously updated
laboratories and libraries and hostels with all
the necessary am enities and facilities for both
boys and girls.
H as built a specialized research institute
accom m odating 18 laboratories for the
researches in pharm aceutical sciences.
H as launched laudable outreach program m es
through N SS units.
Is proud of its Institute of Environm ent Science
and Research Education, which has been
identified as a nodal agency by the
G overnm ent of India for its program m es of
biodiversity and environm ental products. It
has adopted several prim ary schools with a
view to create environm ental consciousnessam ong their students.
H as established W om en's C rea tivity
D evelopm ent C entre to undertake researches
regarding w om en, particularly, those of
disadvantage groups and to prom ote
creativity am ong them .
9
Distinct Features of this University:
-
7/25/2019 BVP CET B.Tech Brochure 2016
12/58
10
-
7/25/2019 BVP CET B.Tech Brochure 2016
13/58
Bharati Vidyapeeth D eem ed U niversity has cam puses in Pune, M um bai, Solapur, Kolhapur,
Sangli, Karad and N ew D elhi, the capital city of India. Bharati Vidyapeeth U niversity has two
cam puses in Pune, one on Pune-Satara Road and another at Erandwane. The C ollege of
Engineering is located at Pune-Satara Road C am pus.
Campuses
1
-
7/25/2019 BVP CET B.Tech Brochure 2016
14/58
thus an approval and recognition of Government of
India, the AICTE, the UGC and the Government of
Maharashtra. As per the section 3 of the UGC Act
1956, the Deemed Universities have the same status
as the State and Central statutory universities. So the
degrees and diplomas, which Bharati Vidyapeeth
Deemed University awards to its students have the
same status and recognition as those awarded by the
state and central statutory universities. Students /
Parents are suggested to visit college website,
for addi t ional
information.
www.bvucoepune.edu. in
Bharati Vidyapeeth Deemed University
Bharati Vidyapeeth University College of
Engineering at Pune was established in August,
1983. Over the last 31 years or so, the College has
made all-round progress and is now acclaimed as
one of the best Engineering Colleges in this part of
the country.
Since its inception till July 2000, the College
was affiliated on a permanent basis to University of
Pune. In July 2000, the Government of India on the
recommendations of the UGC and AICTE has
included this College as a constituent unit of Bharati
Vidyapeeth Deemed University. This College has
College of Engineering, Pune
12
-
7/25/2019 BVP CET B.Tech Brochure 2016
15/58
ACCREDITATION
MEMORANDUM OF
UNDERSTANDING
To keep the universities / institutions at par in
imparting quality education, UGC and AICTE haveintroduced accreditation process. NAAC-
established by UGC has reaccreditated with 'A'
grade to Bharati Vidyapeeth Deemed University.
Na tiona l Board of Accred ita tion has
accredeted 71 programmes being conducted at
BVDU, College of Engineering, Pune.
BVDUCOE is one of the top performing
institutions of which is constantly placed within top50 technical institutes in India, in the survey
conducted by Dataquest & IDC. This survey is
based on the criterion such as, teaching-learning
process, technology implementation, placement
research, infrastructure etc.
BVDUCOE, Pune has been selected for the
grant of Rs. 4 Cr. under TEQIP-II programme of
MHRD, New Delhi supported World Bank.
College has driven the special task, which
resulted in signing the following Memorandum of
Understanding (MOU) with other institutes /
organizations.
1. Joint School of Nano Science and Nano
Engineering of NCAT, USA.
2. North Carolina A & T State University,
Greensboro, USA for faculty development
and research.
3. Infosys under campus connect programme.
4. Actel Corporation, USA to establish ultra
modern VLSI Laboratory for post-graduate
students. Under this MoU, College has
received equipments worth of Rs. 1.5 Crores.
5. TATA Consultancy services, Pune.
6. ORACLE Corporation for Workforce
Development Programme.
7. SKF India Ltd. for establishment of lubricant
condition monitoring laboratory
The college has its own spacious, well -
designed building fulfulling AICTE norms, located
in a beautiful Campus at Pune-Satara Road, Pune. It
has sufficient space to accommodate lecture halls,
laboratories, seminar halls, Library, Workshop etc.
The faculty is competent, highly motivated
and experienced with acknowledged expertise in
their respective disciplines. A fairly large number of
them have research papers to their credit and many
of them have been actively involved in research
activities. These teachers are a source of not only
knowledge, but also of inspiration for the students.
A large number of experts from eminent institutes,
industries and research and development
organisations are frequently called to deliver
lectures on specific important topics. Presently we
have 33 faculty member with Ph.D. and 41 arepursing.
COLLEGE BUILDING
FACULTY
1
-
7/25/2019 BVP CET B.Tech Brochure 2016
16/58
Over the years, the college has createdexcellent infrastructural facilities in terms of well
equipped laboratories and workshops.
Laboratories are housed in spacious halls and
they have the latest state-of-the-art equipment. The
College allocates enough funding to update its
laboratories. Computer laboratories that are well
equipped with the latest machines and various types
of softwares and application development tools.
Further, softwares required in the respective fields
are also available in the respective departments.
LIBRARY
The college provides adequate library facilities
to the staff and students. Library of the college is
placed in a specious building admeasuring more
than 2500 sq.m. area. Library contains separate
stacking room, Computer Centre, Periodical
Section, Audio Visual Room, Reference Section &
Three Reading Halls. Reading Halls are open for
sixteen hours a day enabling the students, especially
the hostelites, to study with concentration in a
pleasant environment. Total there are more than
52,000 books available in the Library. College also
subscribed 135 national / international journals.
The College Library is housed in a five storied
well planned and designed building.
The college has a well stocked library with a
student-book ratio of 1:17.
The library has tie ups / liasions with leading
libraries of Institutions such as IIT, Mumbai,
NCL, Pune and ARAI, Pune, BCL, Pune,
DIAT, Pune etc. This provides additional
access to the reading material to our students
and faculties.
The library building houses two reading rooms
admeasuring 251 Sq.M. each with a capacity
to accommodate 520 students for study
purpose.
Online Public Access Catalogue, reprography
are other facilities available to the students.
Digital library consisting of 83,69,299 books,
33,541 current periodicals, 20,235 catalogues of
periodicals, 9,12,042 periodical articles, 5,000 CD-
ROM, 748 Thesis and Dissertations, 44,304 Video
Recordings and 1,613 Sound Recordings in e-form
are available to facilitate and promote research. The
college has obtained membership of DELNET for
this purpose.
Infrastructural Facilities
14
-
7/25/2019 BVP CET B.Tech Brochure 2016
17/58
1
COMPUTER CENTER
Computer Center is established in the Library with 135 computers of latest configuration and leased line
of one mbps. The center is made available to the students for 18 hrs. a day under the supervision of specially
appointed computer system administrator.
HOSTELS
Bharati Vidyapeeth provides excellent hostel facilities to its students. It includes seven girls and two
boys hostels with a total capacity to accommodate over 1200 students. Students seeking admissions to the
hostel in a prescribed form. Admissions to hostel are given on the first come first serve basis.
-
7/25/2019 BVP CET B.Tech Brochure 2016
18/58
16
-
7/25/2019 BVP CET B.Tech Brochure 2016
19/58
DEPARTMENT OF CHEMICAL
ENGINEERING
(Accredited by NBA)
The Department of Chemical Engineering has
various laboratories well equipped with modern
instruments. Computer facility is provided to the
students with a view to facilitate their working on
Mathematical Modelling. The latest availableequipment installed in laboratories are in like heat
exchanger cyclone separator, grinding, distillation,
drying, P.I.D. controller, Instrumentation and
Instrumental Analysis etc. Students can also have
regular interaction with well - known research
institutions like the National Chemical Laboratory
(NCL) Pune, Agharkar Research Institute, Pune.
From the Academic Year 2002-2003, a post-
graduate programme in the Department leading to
the degree of M.Tech. (Chemical) has been
introduced.
DEPARTMENT OF CIVIL ENGINEERING
(Accredited by NBA)
The department of Civil Engineering has
laboratories in Environmental Engineering,
Hydraulics, Geotechnical and TransportationEngineering, Geology, Surveying, Computer
laboratories. It has developed good liaison with the
industry and reputed research institutes like CW &
PRS in the form of consultancy projects, research
works and exchange of information by interacting
with experts in respective fields.
This has been accomplished through the qualified
and experienced staff of the Department. Presently
five staff members are with Ph.D. degree and others
are post graduate educated. More than 120 research
papers were presented by the staff members of Civil
Engineering Department taken together.
The Department also runs a post graduate course in
Hydraulic Engineering. Some of the research
projects completed in the department are protection
of scour around bridge pier by riprap, Hydraulics
considerations for sensing radians of the sky jump
bucket, High volume fly ash concrete etc.
Number of testing and consultancy works are
undertaken by the staff in the areas of Geotechnical
E n g i n e e r i n g , H y d r a u l i c E n g i n e e r i n g ,
Environmental Engineering, Geology and
Surveying.
DEPARTMENT OF COMPUTER
ENGINEERING AND INFORMATION
TECHNOLOGY
(Accredited by NBA)
The Department has Eleven well equipped
Computer laboratories, which include 4 servers
viz., 2 Windows 2003 & 1 Linux Servers and 1
Novell NetWare Servers. The latest softwares are
made available to the students. The Hardware
laboratories are equipped with assembly kits,
interfacing kits, simulators, cross-compilers,
microcontrollers, DSP kits and the like. The
specialised laboratories are Digital Signal
Processing, Multimedia Techniques, Unix,
Departments
1
-
7/25/2019 BVP CET B.Tech Brochure 2016
20/58
18
Graphics & Animation, Digital Communications,
Advanced Computer Architecture, Database
Management System & Software Engineering.
The courses focus on theory, design,
implementation, application and evaluation of
computer based information systems in their
technical, social and organisational contexts. The
post graduate courses leading to degree of M.Tech.
(Computer Engineering) and M.Tech. Information
Technology is run in the Department.
DEPARTMENT OF ELECTRICAL
ENGINEERING
(Accrediated by NBA)
The laboratories in the department are Electrical
Machines Lab, Control Systems-Microprocessor
Lab, Electrical Measurements and Instrumentation
Lab, Switchgear Protection Lab and High Voltage
Lab, Advanced microprocessor, Drives and Control
Lab, Computer and Software Laboratory.
Department has a unit of IEEE branch.
The post graduate courses leading to degree of
M.Tech Electrical is run in the Department.
DEPARTMENT OF BASIC SCIENCE
AND HUMANITIESThe Department constitutes Physics, Chemistry,
Mathematics and Management and Social Science
Departments. Four staff members have completed
their Ph.D. degree. They have also received
financial grant from the U.G.C. for their research
projects.
The Department has well equipped spacious
laboratories for the practical work.
DEPARTMENT OF ELECTRONICS
ENGINEERING
(Accrediated by NBA)
The Department has the following Laboratories:
Computer Lab, Microprocessor Based Systems,
Digital Electronics, Microelectronics,
Communication Lab, Circuits & Networks, Power
Electronics, Instrumentation & Control, Opto-
Electronics, Linear integrated circuits. The post
graduate courses leading to degree of M.Tech
Electronics is run in the Department.
DEPARTMENT OF MECHANICAL
ENGINEERING
(Accredited by NBA)
The laboratories in the department are
Thermodynamics Laboratory, Theory of Machines
Laboratory, Computer Laboratory, Metrology and
Quality Control Laboratory, Steam Power plant and
Hydraulic Machinery Laboratory. In view to keep
pace with time, department has started post
graduate course in M.Tech. CAD/CAM, which is
unique in Pune region.
-
7/25/2019 BVP CET B.Tech Brochure 2016
21/58
1
-
7/25/2019 BVP CET B.Tech Brochure 2016
22/58
-
7/25/2019 BVP CET B.Tech Brochure 2016
23/58
2
DEPARTMENT OF PRODUCTION
ENGINEERING
(Accredited by NBA)
The laboratory, infrastructure and facilities include
Modern Production Laboratory, Metallurgy
Laboratory, Metrology and Quality Control
Laboratory, Robotics and Automation Laboratory,
CAD/CAM/CIM Laboratory, Production
Management Laboratory and Machine Tool
Laboratory. Specialized subject areas available in
the Department are CAD/CAM, Non-Traditional
Machining Process etc.
WORKSHOP
Workshop is intended as a core facility, to carry out
all mechanical fabrication works. Workshop spread
on 20000 sq. ft is well equipped with all facilities
required to train the undergraduate students of
engineering as well as to cater the needs of
postgrad ua te student s for fab ri cat ion of
equipments and to undertake experimentations.
The major facilities in workshop are machining &
fabrication. Workshop has 13 sections. It has a
wide variety of machines which includes,
Universal Milling Machines, Horizontal Milling
Machines, Cylindrical Grinder, Centerless
Grinder, Slotting machine, Shaper, Centre Lathes,Arc welding machines, Tungsten Intert Gas
Welding, Metal Inert Gas Welding, Resistance Spot
Welding, etc. It has an advanced manufacturing
shop with an Electro discharge machine and an
electrochemical machine, a CNC lathe.
TRAINING AND PLACEMENT CELL
Training and Placement Cell has continuous
interaction with industries. The Prominent
industries which have regularly visited for campus
placement are TCS, Infosys, Tata Infotech, Zensar,
Wipro, Kanbay, Tech-Mahindra, L&T, Satyam
Computers, Cognizant Technology, HLL, KOEL,
EDS Syntel, Godrej Boyce, Punj Lloyed,
Acenture,Cerner, US Technology etc. 63
companies visited for campus placement to our
college in year 2013-14. More than 73% of thestudents from the outgoing batch of June 2013 have
already been placed in these companies.
The cell coordinates for vocational training, career
guidance lectures for students, industrial visits etc.
R & D CELL
A separate R & D Cell is established to promote
research activities in the institution. The R&D cell
is particularly responsible for :
1. Motivating the staff members is carry out
research in the field of engineering of their
interest.
2. Promoting higher technical education in a
disciplined manner. This includes framing of
norms and standards and regulating and
controlling the post graduate and doctoral
programmes.
3. Establishing the Industry Institute interaction.
4. Guiding the departments in preparing project
reports for research fundings. The agencies
are AICTE, UGC, DST, DoE etc.
5. Collaborate with industries through MoU.
-
7/25/2019 BVP CET B.Tech Brochure 2016
24/58
22
SPORTS
The college has a well-equipped Gymkhana. The
students in the college are provided with all the
sports equipment. Our students have emerged with
flying colours in various sports activities at College,
University, State and National levels.
CULTURAL ACTIVITIES
Art Circle is managed by students under the
guidance of faculty members. It serves as a platform
for enhancing and exposing the often hidden talents
and skills of the students in various fields like
Dance, Orchestra, Fine Arts, Drama etc. and in
competitions held by various Institutions. The
college has won various prizes in intercollege
competitions and earned appreciation for its
activities and gained good reputation in extra
curricular fields. The college organizes
'BHARATIYAM', the National Level AnnualTechFest every year.
STUDENTS' ASSOCIATIONS
All Departments have their own very active
Students Association which organize various
activities like wallpapers, seminars and workshops,
industrial visits, etc. throughout the year.
The institute is also having various students chaptersuch as Society of Automotive Engineers,
Institution of Engineers (INDIA), IEEE etc.
NETWORK SECURITY
The use of internet has increased to multifolds
in recent years and network security has become the
most complicated problem in cyberworld. The
network crimes consist of financial crimes, online
gambling, intellectual property right crimes, e-mail
spoofing, cyber defamation etc. To eliminate the
above threats providing security is of paramount
important to every corporate, Government
organizations and every individual who is using
computer technology. The estimated demand ofsuch trained professionals by year 2011 will be
5,00,000. To make students of this College
conversant with Network security.
Bharati Vidyapeeth Deemed University
started a course on "Network Security" for all
students of Engineering Colleges. First year
students will undertake Module I and the students of
second and third year of all disciplines will
undertake module II & III respectively.
The objectives of this course are :
Develop qualified experts in cyber security field.
Protect organization, network and system from
malicious attacks.
Build, implement and follow a complete
security policy.
Learn the associated laws to protect the
intellectual property attack.
Students completing module I will be
awarded certificate course in Network Security and
Diploma and Advanced Diploma to students
completing II and III module successfully.
-
7/25/2019 BVP CET B.Tech Brochure 2016
25/58
2
-
7/25/2019 BVP CET B.Tech Brochure 2016
26/58
INTRODUCTION
POST-GRADUATE CO URSES
1. The students will be admitted to the Engineering degree courses of the College of Engineering, Pune on
the basis of the merit obtained by them in the All India Common Entrance Test CET (Engineering) -
2016conducted by the Bharati Vidyapeeth Deemed University.
The college is running post graduate courses in following branches,
M.Tech. Chemical M.Tech. Civil
M.Tech. Computer M.Tech. Electrical
M.Tech. Electronics M.Tech. Mechanical
M.Tech. (Information Technology) M.Tech. (Nano Technology)
The admissions to these courses are given through an Entrance Test conducted separately by the
University.
Admission Procedure
Courses & Intake Capacities
24
Sr. No. Name of Course Students intake for first year
1. B. Tech. Chemical 602. B. Tech. Civil 60
3. B. Tech. Computer 120
4. B. Tech. Electrical 60
5. B. Tech. Electronics 90
6. B.Tech. Electronics & Telecommunication 120
7. B. Tech. Information Technology 60
8. B. Tech. Mechanical 120
9. B. Tech. Production 60
-
7/25/2019 BVP CET B.Tech Brochure 2016
27/58
N.B. :
Foreign National / PIO / OCI Merit Seats :
16th May 2016
Foreign National / PIO / OCI / NRI / Management Merit Seats :
Fifteen percent (15%) supernumerary seats of over and above the sanctioned intake ineach discipline are reserved for Foreign National / PIO / OCI. Candidates desirous of getting
admission under these Category will have to apply to The Registrar, Bharati Vidyapeeth
Deemed University, Pune. The last Date for submission of the form for this Category is
before 5.00 p.m.
Fifteen percent (
(Engineering)
2. CET (Engineering) - 2016will be conducted on the date and at the time as mentioned in the calendar
of events at the examination centers in the following cities, Pune, New Delhi, Navi Mumbai,
Hyderabad, Vadodara, Indore, Lucknow, Bangalore. The exact location and address of the
Examination Centres will be communicated to the candidates through their admission cards.
3. There will be one question paper at the CET (Engineering) - 2016. It will be set in English medium
and will contain 200 multiple choice objective type questions with four options A , B , C , & D . with
only one correct choice.
It will consist 100 questions on Mathematics and 100 questions on Physics.
Subject Question Numbers Marks
Mathematics 001 to 100 100
Physics 101 to 200 100
Each question carries one mark. These questions will be in general on the detailed syllabi given in
Annexure- I. There will not be negative marking.
15%) of the sanctioned intake in each branch are reserved for
Foreign/NRI(Non-Resident-Indian)/P.I.O./O.C.I./Management Merit Category students. Candidates
seeking admissions to the seats of this category will have to apply to The Registrar, Bharati VidyapeethDeemed University, Pune. The last date for submission of form to this Category is before
5.00 p.m. Seats remaining vacant after allotment to Foreign / N.R.I. / P.I.O. / O.C.I. Merit students will
be allotted to Indian students under Management Merit Category on the basis of marks obtained by
them in the CET -2016.
th16 May 2016
2
-
7/25/2019 BVP CET B.Tech Brochure 2016
28/58
Eligibi lity for appearing in CET (Engineering) - 2016
Requisite qualifications for admission to First Year of B. Tech. courses
Instructions for completing the Appl ication Form for CET (Engineering) 2016
4. Only those candidates who satisfy or are likely to satisfy the relevant eligibility requirements for
admission to the courses will be considered eligible to appear for the Common Entrance TestCET (Engineering) - 2016.
The candidate seeking admission to any of these courses should have passed the Higher
Secondary Certificate Examination (H.S.C.) or the Indian School Certificate Examination (ISCE) or
any other examination equivalent to 10+2 or HSC examination of any recognised Board/ University
from any school/college situated in India.
i) Passed 10+2 examination with Physics and Mathematics as compulsory subjects along with
one of the Chemistry / Biotechnology / Biology / Technical Vocational subject.
Obtained at least 45% marks (40% in case of candidate belonging to SC/ST category) in the
above subjects taken together.
ii) Candidates who are likely to appear or who have appeared for qualifying examination i. e.
H.S.C. etc. but whose results have not been declared will also be considered eligible to appear
for CET (Engineering) - 2016, provided they have offered the above mentioned subjects at
the said examinations. However, they should produce marksheet of HSC at time of
counselling.
5. A candidate desirou s of appearing for the CET (Engineering) - 2016 is required to complete the
prescribed application form appended at the end of this brochure and submit the same to the
University.
6. The candidates should avoid overwriting, cutting, erasing on the form. Any discrepancies in the
statements and/or submission of incomplete form will lead to its rejection / cancellation of admission.6.1 Blue/Black Ink pen should be used for filling in the application form. ALL THE ENTRIES IN
THE FORM SHOULD BE IN THE CAPITAL LETTERS ONLY.
6.2 Squares provided in the application form are only for writing alphabets in capitals for
indicating name, address etc. or for appropriate numbers. The alphabet or the number written
in the square must not touch the edge of the square.
Correct Incorrect
Application Procedure
26
A A
-
7/25/2019 BVP CET B.Tech Brochure 2016
29/58
ES H R I K A R M U K U N D M A T
0 5 0 1 1 9 8 0
D D M M Y Y Y Y
6.3 If any alphabet touches the edge of the square the form may be rejected.
6.4 His/Her name mentioned in the form by the candidate should be the same as in the documents
of 10+2 examination. One square should be used only for one alphabet. Please leave one blank
square between adjacent words. For example, the name Shrikar Mukund Mate should be
written as follows :
6.5 If the number of a date or month of birth is a single digit, it should be prefixed with a zero. Forth
example, 5 January, 1980 should be written as :-
6.6 The candidate should indicate clearly the examination centre at which he/she wishes to appear
For examination. Write the corresponding number of the centre as shown
6.7 A passport size photograph should be affixed at the appropriate place in the application form.
The photograph is to be firmly affixed by using gum. It should not be pinned. The photograph
is to be attested by the Principal/ Head of the Institution where the candidate has studied or by a
Gazetted officer. The attestation of the photograph should be done in such a way that the
photograph is not defaced.
6.8 The declaration in the application form is to be signed both by the applicant and the
mother/father/guardian of the applicant.
6.9 Address should be written in capital letters. Use "," "-" "/" "." wherever required as shown in
the example. For example, if the address is 161/B,D.L.W colony write as
6.10 Confirm by ticking whether the candidate has taken these subjects in HSC / 12th Std.2
Y1 6 1 / B , . . .D L W C O L O N
C entre N o. C entre
01
05
02
06
03
04
Pune
N avi M um bai
Vadodara
N ew D elhi
H yderabad
Indore
Lucknow07
08 Bangalore
-
7/25/2019 BVP CET B.Tech Brochure 2016
30/58
6.11 Columns for the year of passing and details of marks at 10th and 12th Std. examinations are to
be filled in separately (Block No. 11). For ex. if the year is 1990 fill as
If appearing for the qualifying examination tick the appropriate circle
6.12 Clearly indicate the category to which the candidate belongs to by ticking of (Block No. 7)
7. CANDIDATES ARE NOT REQUIRED TO ENCLOSE ORIGINALS OR PHOTOCOPIES OF ANY
CERTIFICATES WITH THE APPLICATION FORM.
8. Completed application form must be accompanied by CET (Engineering) - 2016fee of Rs. 1500/- It
should be submitted either in person (in which case the fee can be paid by cash) or mailed (in which
case the fee should be paid by Demand Draft of Rs. 1500/-drawn on any nationalised bank or Bharati
Sahakari Bank Ltd. payable at Pune, in favour of Registrar, Bharati Vidyapeeth Deemed
University, Pune) to the following address
CET Office :
Bharati Vidyapeeth Deemed University
Second Floor, CET Dept.,
Bharati Vidyapeeth Bhavan, L.B.S. Marg, Pune 411 030.
(CANDIDATES ARE ADVISED TO OBTAIN AND MAINTAIN PROOF OF DRAFT AND OF
DISPATCH OF THE APPLICATION FORM. THIS MAY BE USEFUL FOR OBTAININGDUPLICATE ADMISSION CARD IF REQUIRED)
8.1 The Candidate should invariably mention the number of his/her application form (as printed on
it) and his / her name on the back of his / her Demand Draft.
8.2 The application sent by mail must be sent by registered post / speed post / courier.
8.3 The application must reach either by hand or by mail to the above address on or before
An incomplete application form and an application form which is not accompanied by a
demand draft of the prescribedCET (Engineering) - 2016 fee of Rs. 1500/-will not be
entertained and processed. This fee should not be sent by money order. Please note that
this fee is non-refundable.
9. This University will not be responsible for any delay or loss of the Application/Admission Card /
Counselling Letter/any other communication in transit. Such a delay will not be condoned.
10. The applicant himself / herself has to ascertain from the University office whether his/her
application has reached the University office or not.
th16 May 2016 by 17.00 hrs.
28
1 9 9 0
-
7/25/2019 BVP CET B.Tech Brochure 2016
31/58
Issue of Admission Cards
Conduct of the CET (Engineering) - 2016
11. Admission Cards for will be dispatched by post to candidates under
certificate of posting. The Admission Card will indicate the Roll Number and Examination Centreallotted to the candidate with its address.
12. The Candidate must not mutilate the Admission Card issued to him/her or change any entry made
therein after it has been authenticated by the University authorities.
13. In case the Admission Card is not received by a candidate by he/she should contact the
concerned Designated Centres at Pune, Navi Mumbai and New Delhi (addresses given in this
brochure) or the concerned examination centres at Vadodara, Hyderabad, Indore, Bangalore on
addresses given in this brochure one day prior to the scheduled date of Entrance Test,
for collecting a duplicate admission card. (For centres at Lucknow the
candidates should contact the designated centre at New Delhi). For issue of duplicate admit card,
the candidate should bring two copies of his/her authenticated photograph along with him/her
and a proof of submission/mailing of application form. In case no proof is submitted, duplicate
admission card will not be issued. Mere purchase of application form will not be considered as a
proof of sending the completed application form.
14. The Test will be conducted at different locations in the designated examination centres at 11.00 hours
on the day mentioned in the calendar of events. The candidates must report at the centre atleast 30
minutes before the scheduled time of commencement of test.
15. THE EXAMINATION HALL WILL BE OPENED 30 MINUTES BEFORE THE
COMMENCEMENT OF THE TEST. CANDIDATES ARE EXPECTED TO TAKE THEIR SEATS
AT LEAST 15 MINUTES BEFORE THE COMMENCEMENT OF THE TEST. IF THE
CANDIDATES DO NOT REPORT IN TIME, THEY ARE LIKELY TO MISS SOME OF THE
IMPORTANT INSTRUCTIONS WHICH WILL BE ANNOUNCED IN THE EXAMINATION
HALL.
16. A candidate will not be allowed to appear for the Test if he/she is late by 30 minutes or more to reach the
examination hall.
17. The candidate must bring his /her admission card with him/her and show the same on demand for
admission to the examination hall. A candidate who does not have the Admission Card issued by the
Bharati Vidyapeeth Deemed University will not be admitted to the examination hall under any
circumstances by the Centre Superintendent.
18. A seat with a number will be allotted to each candidate in the examination hall.
CET (Engineering) - 2016
CET
(Engineering) - 2016
21st May 2016
,
29
-
7/25/2019 BVP CET B.Tech Brochure 2016
32/58
19. A Candidate will not be allowed to carry any textual material, printed or hand written chits or any other
material except the Admission Card inside the examination hall. Candidates are not permitted to bring
calculators, slide rules, Log tables, electronic watches with facilities of calculators, laptop computers,
personal stereo systems, walkie-talkie sets, paging devices, mobile telephones and any other
objects/devices in the examination hall. Possession or use of such devices during the examination is
prohibited and candidate is liable to be expelled if found using or possessing them
20. No candidate, will be allowed to go outside the examination hall till the completion of the entire
duration of examination. Once the candidate leaves the hall (even for answering a cal of nature)
he/she will not be readmitted to examination hall. No exception will be made in this regard.
21. Parents, relatives, or friends of the candidates will not be allowed to enter into the premises of the
centre. No arrangement will be made for tea snacks etc. for the students or parents.
22. Candidates are advised to bring with them a cardboard or a clipboard, on which nothing should have
been written. This board will be useful to them while writing their responses in the answer sheet if in
case tables in the examination hall do not have smooth surface.
23. Smoking in the examination centre is strictly prohibited. Beverages or snacks of any kind are not
allowed to be taken into the examination hall during examination hours.
24. Candidates should maintain perfect silenc and discipline in the examination hall. Any
conversation, gesticulation or disturbance in the examination hall shall be considered as misbehavior
and the candidates involved in such behaviour will be expelled from the examination hall. Similarly, if
any candidate is found using unfair means or allowing someone else to impersonate him/her, his/her
candidature at the examination will be instantaneously cancelled.
25. During the examination time, the invigilator will check the Admission Cards of the ca nd id ate s to
satisfy himself/herself about the identity of each candidate. The invigilator will also put his/her
signature in the place provided in the Answer Sheet on SIDE-1.
26. After completing the test and before handing over the Test Booklet and the Answer Sheet back to the
invigilator, the candidate should check once again whether all the particulars required in the Test
Booklet and the Answer Sheet have been correctly written. He should ensure that the Roll Number,
Centre Code and the Test Booklet number are correctly written on the answer sheet.
27. A warning bell will be given at the beginning of the examination and also to mark the half time of the
examination time. A bell will also be given before the closing time when the candidate must stop
marking the responses or writing.
30
-
7/25/2019 BVP CET B.Tech Brochure 2016
33/58
28. The examination consists of one question paper. The question paper will consist of two hundred
objective type questions on Physics and Mathematics. The duration of the examination is of 3
hours. It will consist of 100 questions on Mathematics, 100 questions on Physics.Each question
carries one mark.
N.B. : There is no negative marking
29. Test Booklet : The candidate will be provided with a sealed Test Booklet with an answer sheet. The
candidate will write with ball point pen the required information regarding Roll Number, Name,
Centre code and Centre of examination in the columns on the Test Booklet without opening the seal.
The candidates are advised not to open/break the seal of the same before they are instructed to do so by
the invigilator.
30. In the Test Booklet, there will be 200 items/questions serially numbered from 001 to 100
on Mathematics , 101 to 200 on Physics. Each question will be followed by four responses marked
A , B , C , & D . Out of these four responses only one will be correct or most appropriate, which
needs to be selected and marked on the answer sheet.
31. An answer sheet will be given to the candidates along with Test Booklet at the time of the test.
31.1 This answer sheet will be of special type, which will be scanned mechanically by Optical Mark
Scanner. So the candidate should handle the answer sheet very carefully. There will be two
sides of the answer sheet.
31.2 Side 1 of the Answer Sheet.
This side of the answer sheet begins with instructions for marking the responses. The following
information is then to be filled in with a ball point pen only, neatly and accurately :
Name of the Candidate
Roll Number
Centre of Examination (Name of the city)
Signature of the Candidate
Optional subject selected to be mentioned on right top corner above test
booklet serial no.
Mode of The Test
Test Booklet
The Answer Sheet
3
-
7/25/2019 BVP CET B.Tech Brochure 2016
34/58
This side of the answer sheet also contains the following columns, which are to
be written/filled in with HB pencil/blue/black ball point pen only. (Please study
the specimen answer sheet appended at Annexure V).
Roll Number : Write in the squares and darken (completely filling in) the
appropriate circles corresponding to Roll Number.
Test Booklet Number : Each test booklet has a number. Write it at
appropriate place.
Test Form Number : Write in the squares and darken the appropriate
circles corresponding to Test Form Number mentioned on the TestBooklet.
This side is used for marking responses to questions numbered 001 to 200. After
every question number, four circles numbered A , B , C , & D are provided for
this purpose.
The candidate must indicate his/her response to the question by darkening the
appropriate circle completely with HB Pencil/blue/black ball point pen. For
Example :
Q.003 Mumbai is the capital city of the state of
(A) Tamilnadu
(B) Karnataka
(C) Orissa
(D) Maharashtra
The correct response is (D). The candidate will locate question number in the
answer sheet and darken the circle (D) as shown below :
If the candidate darkens more than one circles or if he does not mark his
response as shown above and marks his response as shown below, his response
will be treated as wrong and will not be given marks.
31.3 Side 2 of the Answer sheet
(A) (B) (C ) (D )
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
001
002
003
004
32
-
7/25/2019 BVP CET B.Tech Brochure 2016
35/58
32 The candidates are advised to decide about the answer before they mark it on the answer sheets.
He/She must ensure that the circle is completely darkened with HB Pencil/blue/black ball point pen
only. A lightly or faintly darkened circle is a wrong method of marking and will be rejected by theOptical Scanner.
33 If the candidate does not want to attempt any particular question, he/she is advised not to touch any of
the circles given against that question. However, it may be noted that there is no negative marking for
selecting the wrong response.
34 The candidate must not fold the answer sheet and should not make any stray marks on it.
35 A specimen copy of the answer sheet is given at Annexure V. Candidates are advised to go through it
and get conversant with it. The candidate will learn from this answer sheet, how to fill in the
information asked for and how to mark the answers. This will help the candidates to do the things
correctly and save their time.
36 If a candidate wants to change any answer marked by him/her on the answer sheet, he/she must
completely erase the existing pencil/blue/black ball point pen mark and then darken the appropriate
circle with HB Pencil/blue/black ball point pen. Candidate must not leave any visible mark in the
circle after erasing. Otherwise the response will be rejected by the optical mark scanner. Such erasingshould be avoided as far as possible.
37 Test Booklet number as filled in by the candidate in the answer sheet will be accepted as final for the
purpose of evaluation. When the booklet number is left blank or more than one booklet numbers are
indicated on the answer sheet, it will be deemed as incorrect booklet number and answer sheet will not
be evaluated.
Note : Please use HB Pencil/blue/black ball point pen only for writing/marking particulars on
Side-2 of the answer sheet.
(A) (B) (C ) (D )
O
O
O
O
O
O
O
O
O
O
O
O
O
O
001
002
003
004
Changing An Answer
3
-
7/25/2019 BVP CET B.Tech Brochure 2016
36/58
34
38 The candidate must bring his/her own materials such as HB pencil/blue/black ball point pen. In case
any pencil/blue/black ball point pen other than HB pencil/blue/black ball point pen is used, the answer
sheet will be possibly rejected by the Optical Mark Scanner. The candidate must also bring his/her own
sharpener and erasers of good quality.
39 USE HB PENCIL/BLUE/BLACK BALL POINT PEN, BLUE OR BLACK BALL PEN TO
DARKEN THE APPROPRIATE CIRCLES.
40 MARKING SHOULD BE DARK AND SHOULD COMPLETELY FILL THE CIRCLE
41 DARKEN ONLY ONE CIRCLE FOR EACH QUESTION
42 PLEASE DO NOT FOLD THE ANSWER SHEET OR MAKE ANY STRAY MARKS ON IT.
43 MAKE THE MARKS ONLY IN THE SPACE PROVIDED
Please note that there will not be negative marking for the wrong answers chosen or unanswered
questions by the candidate.
44 The candidate will not do any rough work or writing work on the answer sheet. All rough work is to bedone in the Test Booklet itself.
45. The result ofCET (Engineering) - 2016will be declared and made available at the office of the
Bharati Vidyapeeth Deemed University in Pune and at our designated centers at Navi Mumbai and
New Delhi on06th June 2016.
The University will prepare lists of Regular Merit Category candidates and Foreign / NRI / PIO / OCI /
Management Merit Category who have appeared for CET (Engineering)-2016based onthe total
marks obtained by them in Mathematics and Physics taken together. The candidates should remain
present for the counselling as per their Merit number and schedule.
It will also be displayed on following web site :
1. University Website : www.bvuniversity.edu.in, bharatividyapeethuniversity.net
2. College Website : www.bvucoepune.edu.in
Important Instructions For Marking
Rough Work
Merit List
Pens, Erasers And Pencil / Blue / Black Ball Point Pens
-
7/25/2019 BVP CET B.Tech Brochure 2016
37/58
The candidates whose names appear in the list prepared on the basis of marks obtained by them in CET
(Engineering) - 2016should attend the Counselling sessions and on-the-spot admissions sessions to
the various branches and courses as per their ranks in the list. The Counselling Sessions combined for
all brances will be conducted at Bharati Vidyapeeth University College of Engineering, Pune-Satara
Road, Pune 411 043.
46 In case two or more candidates obtain equal marks in the CET (Engineering) - 2016, the inter se rank
of such candidates shall be determined in order of preference as under :
46.1 Candidates obtaining higher marks in Mathematics in the entrance test.
46.2 Candidates obtaining higher aggregate percentage of marks in H.S.C./equivalent
examinations
46.3 Candidates obtaining higher percentage of marks in Mathematics in the 10th standard
examination.
46.4 In case of tie at this level, computerised random selection of candidate will be carried out.
After declaration of result the university will dispatch counselling and on the spot selection invitation
letters to first 5000 candidate in the merit list ofCET Engineering-2016.
The candidate from merit No. 1 to 5000 should attend the counselling on the dates mentioned in the
counselling schedule on cover page 3. Candidate from merit no. 5001 to 8000 should attend the
counselling ONLY AFTER CONFIRMATION OF VACANCY POSITION ON OUR WEBSITESand
on the dates specified on cover page 3.
The university shall allott the seats by merit and as per availability. It may be possible that seat in the
branch of the choice of the candidate or in any other branch may not be available at the time of
councelling of the candidate. The university shall not be responsible for the same.
47. The counselling session will be conducted at Bharati Vidyapeeth Deemed University College of
Engineering, Pune as per the schedule indicated back inside page. FAILURE TO REPORT FOR
COUNSELLING ON THE SCHEDULED DATE and TIME MAY RESULT IN
INSTANTANEOUS CANCELLATION OF CANDIDATE'S CLAIM FOR ADMISSION. It shall be
candidate's responsibility to see the result of CET (Engineering) - 2016
48. The candidate should remain present for the personal interview (counselling) and for on the spot
admission, if eligible, even though he/she does not receive any intimation letter from the University.
49. Only the candidate and one of his parents/guardian will be allowed into the hall where
counselling is held. The candidates will be called in the order of their ranking in the merit list and
offered the seats to the various courses available at that point of time. The candidate will be allowed to
choose admission to the course in which seats are available when his / her turn for counselling comes.
Counselling and On The Spot Admission Session
3
-
7/25/2019 BVP CET B.Tech Brochure 2016
38/58
Date Candidates called for Counselling Time
Regular Merit Category
20-06-2016 Merit No. 1 to 1000 10.00 a.m. onwards
21-06-2016 Merit No. 1001 to 2000 10.00 a.m. onwards
22-06-2016 Merit No. 2001 to 3000 10.00 a.m. onwards
23-06-2016 Merit No. 3001 to 4000 10.00 a.m. onwards
24-06-2016 Merit No. 4001 to 5000 10.00 a.m. onwards
Foreign / NRI / PIO / OCI / Management Merit Category
25-06-2016 Merit No. 001 to 140 10.00 a.m. onwards
50. The candidate must note that appearance at this test and inclusion of name in the Merit list do not
necessarily mean that he/she will get admission to the course of his/her choice. His/Her admission to a
particular course will depend upon the availability of vacancies for that particular course at the time
of his/her counselling.
51. At the time of reporting for the counselling, the candidate is required to produce the documents
(original and two sets of photocopies) listed in Annexure-II and letter for counselling. If the candidate
is admitted to any of the courses, these documents will be retained by the University till he/she
completes the course. If the candidate fails to produce all or any of the documents listed in Annexure II,
he/she will instantaneously forfeit his/her claim for a seat.
Admission will be offered to the eligible candidates any branch as per the availability of the vacancy in
that branch at the time of counselling.
It may be possible that the student may fail to receive the invitation letter due to any reason.Theymayattend the counselling sessions as per the schedule of counselling on their own, provided they satisfy
requisite qualifications for admission and his merit in theCET (Engineering)-2016. The candidates
who fail to receive the counselling letter, for whatever reason, must bring some other proof of identity
of appearing at CET (Engineering)-2016 examination, for permission to appear for the counselling
sessions. It will not be possible to make any changes or adjustments in the dates of the counselling
sessions.
The candidate should attend counselling session on his / her own judgment. It may happen that a seat
for admission for the course of his choice may not be available when his / her turn comes up as per the
merit in CET (Engineering)-2016results.
52. The candidates in the merit list prepared on the basis of marks obtained by the candidates in theCET
(Engineering) - 2016will be called in as per their ranks for counselling and on the spot admission to
the various courses as shown below :
Merit No. above 5001 should see the University / College website for vacancy status.
Schedule of Counselling
36
-
7/25/2019 BVP CET B.Tech Brochure 2016
39/58
3
All students and parents are requested to refer college website www.bvucoepune.edu.in
for vacancy status during counselling and report accordingly.
Admission status and vacancy positions will be uploaded on college website daily during
counseling period.
All students and parents are requested to refer college website - www.bvucoepune.edu.in
for vacancy status during counselling and report accordingly.
53. After filling all the seats, waiting list numbers will be allotted to only those candidates who have
reported for counselling.
Candidates in the waiting list will be called for admission subject to the vacancies developed on the
basis of cancellation of admissions by the candidates admitted through the counselling.
However vacancies developed because of cancellation of admission by the students, will be made
available to the students admitted & who stands next in the merit list.
54. If any candidate finds it impossible to be physically present for the counselling due to
unavoidable circumstances, he/she may authorise any other responsible individual to represent
him/her at the counselling. This representative must carry with him/her the letter of authorization in
the format given in Annexure IV as well as all the documents listed in Annexure II. If the candidate or
his /her representative fails to report for the counselling on the date and the time mentioned in the
schedule of counselling, his/her claim for admission to any of the branches or courses will be forfeited.The choice of course or branch made by the candidate/his/her representative will be final and binding
and will not be ordinarily altered later
55. The selected candidate will be required to pay the entire amount of annual tuition fee and other fees on
the day of counselling itself, through Bank Draft drawn in favour of the Registrar, Bharati
Vidyapeeth Deemed University"payable at Pune. In case the candidate fails to remit the entire
amount of fees, he/she is likely to lose his/her claim for admission. Refund of fees will be governed by
the rules of the University prevailing at that time.
Further, the candidate is required to pay additional amount of `10,050/- against fees for value added
course of Network Security (`6600/-), Caution Money Deposit (`2000/-), Smart Card (`450/-) and
Dress Code (`1000/- for boys & `850/- for girls), in cash at the time of admission. Caustion money
deposit is refunded after completion of course.
56. Fee Structure
Distribution Regular Management Foreign/NRI/PIO/OCI
Merit Category Merit Category Merit Category
Annual Fees `95,000/- US $ 5300`1,50,000/-
Date Candidates called for Counselling Time
Regular category
27-06-2016 Merit No. 5001 to 6000 10.00 a.m. onwards
28-06-2016 Merit No. 6001 to 7000 10.00 a.m. onwards
29-06-2016 Merit No. 7001 to 8000 10.00 a.m. onwards
-
7/25/2019 BVP CET B.Tech Brochure 2016
40/58
57. There are a few seats available in the hostel which will be allotted on first come first served basis.
58. Those who are desirous of getting admission to the hostel will be required to pay the entire amount of
rent for the year as well as the mess charges for the entire academic year at the time of admission only.The details of hostel fees will be given in counselling letter. The payment for the hostels should be
made by separate D.D.
59. Differences of opinion and disputes arising in the interpretation and implementation of the clauses in
this Brochure, if any, will be referred to the Vice-Chancellor of the Bharati Vidyapeeth Deemed
University, Pune and his decision shall be final and binding on all the concerned.
Any legal matters arising out of the entire admission process through Common Entrance Test
conducted by Bharati Vidyapeeth Deemed University, Pune-30 i.e. CET(Engineering)-2016will bein the jurisdiction of courts of Pune, Maharashtra State.
In case of cancellation of Admission the Refund policy will be as.
1) In the event of student withdrawing before the starting of the particular course, the entire fee collected
from the student, after a deduction of the processing fee of Rs. 1,000/- (Rupees One thousand only)
shall be refunded.
2) If a student submits his application for cancellation of admission in a prescribed form (duly completed)within 15 calendar days from the date of commencement of the particular course, 10 percent of total
amount of tuition fees prescribed for the course will be deducted form the amount of tuition fee paid by
him and the balance amount will be refunded.
3) If a student submits his application for cancellation of admission in a prescribed form (duly completed
within 30 calendar days from the date of commencement of the particular course, 20 percent of the
total amount of tuition fees prescribed for the course will be deducted from the amount of tuition fee
paid by him and the balance amount will be refunded.
4) If a student submits an application for cancellation of admission after 30 calendar days from the date of
commencement of the particular course, no refund will be made and Rule (5) may also be invoked.
However, if the application for cancellation of admission is submitted before the last date prescribed
for admission, and if the vacated seat is filled by another candidate, 25% of the amount of tuition fees
prescribed for the course will be deducted from the amount of tuition fee paid and the balance amount
will be refunded.
5) If any student admitted to any course leaves the course after the prescribed last date for admission of
the particular course no refund will be made and he will be required to pay full amount of tuition fees
for the remaining entire duration of the course.
60. Court Jurisdiction
61. Refund of Fees
38
-
7/25/2019 BVP CET B.Tech Brochure 2016
41/58
Cancellation of Hostel admission and refund of admission fees and deposit
1) Cancellation of admission
The student desirous of cancelling Hostel admission will have to apply in his/her own handwriting to the
Chief Rector through the Principal of the concerned College.
2) Refund of Hostel Fees
The fees once paid are not refundable except under certain special circumstances as mentioned below.
a) If the student cancels his/her admission in the college or in the hostel on his/her own.
b) If the College Principal / the University cancels admission of the student on any technical ground.
3) Deduction of fee and charges on cancellation of admission :
If the admission is cancelled after confirmation within
15 days - Rs. 4,000/
15 days to 30 days - Rs. 8,000/
After 30 days - No refund
4) Refund of Deposit
1 The Hostel Deposit will be refunded only after the student has obtained the no dues certificate from the
college as well as from the hostel.
2 The claim for refund of deposit should be made within one year of leaving the hostel. Otherwise the
deposit will be forfeited.
3 The refund of deposit will be made by cheque. Ordinarily the hostel deposit will be refunded once in a
year i.e. during the month of August.
Note :
1. The rules for refund of Hostel fees will be applicable only after full payment on admission.
2. Date of full payment will be considered as first day of Hostel admission.
3. The student will have to produce his / her copy of Bank Challan to claim refund.
4. Admission fee is non-refundable.
5. The mess charges for the entire month in which the student applies for cancellation of admission shall be
deducted. The mess money of the remaining months of the mess charges will be refunded
3
-
7/25/2019 BVP CET B.Tech Brochure 2016
42/58
-
7/25/2019 BVP CET B.Tech Brochure 2016
43/58
Annexure I
Recommended Syllabus For CET (Engineering)-2016
MATHEMATICS
1. Trigonometry Angle and its measurements, Standard angles, Angles in quadrant and
quadrantal angles, Relation between degree measure and radian measure,
Length of arc of a circle, Area of sector, Trigonometric ratios :
Trigonometric ratios of any angle, Signs of Trigonometric ratios in different
quadrants, Fundamental identities , Trigonometric ratios of compound
angles, Trigonometric ratios of allied angles, Trigonometric ratios of
multiple angles, Trigonometric ratios of half angles, Factorization and
Defactorization formulae , Sum and difference of two angles , Properties of
Triangle : Trigonometric ratios of angles of a triangle, Cosine rule, Sine rule,
Projection rule, Inverse Circular functions : Properties of inverse circular
functions. General solution of Trigonometric equations. Area of triangle.
2. Determinant Determinant of order 3, (Expansion and Properties), Cramer's rule,
Condition of consistency, Area of a triangle.
3. Sets, Relations and Review of set theory, Power set, Cartesian product, Relations, Functions,
Functions Types of functions, Graphs of functions, Composite function, Inverse
function, Constant function.
4. Logarithm Introduction and definition, Laws of logarithm with proof, Change of base,Numerical Problems.
5. Complex Numbers Complex Number in the form a+ib, Modulus, Complex Conjugate,
Argument of Complex Number, Algebra of Complex numbers, Square roots
of Complex numbers, Argand diagram.
6. Quadratic Roots of equation, Nature of roots, Sum and product of roots, Formation of
Equations quadratic equation, Symmetric functions of roots, Complex cube roots of
unity.
7. Sequences and Arithmetic Progression, Geometric progression, Harmonic progression,
Series Arithmetic mean, Geometric mean, Harmonic mean , Special series :2 3n, n , n and their uses.
8. Permutations and Factorial Notation, Properties of n!, Fundamental Principle of Counting,
Combinations Permutations, Permutations of repeated objects, Circular permutation,
Combinations, Relation between permutations and combinations,
Properties of combination.
4
-
7/25/2019 BVP CET B.Tech Brochure 2016
44/58
9. Mathematical Principle of Mathematical Induction and its applications, Binomial
Induction and Theorem for, n N (statement only), Obtaining general term in the
Binomial Theorem expansion. Binomial theorem for any index. Binomial coefficients.
10. Limits & Continuity Standard Limits, Definitions, Algebra of limits (without proof), Limit at
infinity, Continuity of a function at a point, Continuity at a function in the
interval, Algebra of continuous functions, Types of discontinuity,
Continuity of some standard functions.
11. Differentiation Definition of Derivative, Derivatives of (a) Constant functions,(b) Power
xfunctions,(c) Trigonometric functions, Derivatives of log x, a , e (without
proof), Rules of Differentiations :(a) Derivative of sum (b) Derivative of
Difference (c) Derivative of product (d) Derivative of Quotient, Derivative
from first principle, Relation between continuity and differentiability,
Derivative of composite function, Derivative of inverse functions,
Derivative of implicit functions, Derivative of parametric functions, Second
order derivative.
12. Applications of Increasing and decreasing functions, Tangent and normal at a point to, a
Derivatives curve, Rate measurer, related rates, Approximations and small errors,
Maxima and minima. Problems based on Cauchys Mean value theorem and
Rolles mean value theorem.
13. Integration Definition of an Integral, Integral as a limit of sum, Integrals of some
standard functions. Rules of integration. Definite Integrals, Methods of
integration., a) Substitution Method., b) Integration by parts., c) Integration
by partial fractions., Definite integrals, (a) Fundamental Theorem of
integral calculus (without proof)., (b) Properties of definite integrals.
Simple integral of the following type:
.
14. Application of Area under the curve, Volume of solid by revaluation,
integral
x
2 2 22 2 2, , ,
dx dx dx dx
x a ax bx cx a ax bx c + + + +
2 2
2 2, , ,px q px qdx dx a x dx
ax bx c ax bx c+ +
+ + + + ( )2 2,ax bx c dx px q ax bx c dx+ + + + +
42
-
7/25/2019 BVP CET B.Tech Brochure 2016
45/58
15. Differential equations Definitions of Differential equation, order, degree, General solution and
Particular solution., Formation of Differential equation., Solutions of First
order and first degree differential equations. a) Variables separable method
(b) Homogeneous and non homogeneous differential equations,Applications of Differential equations, Growth and decay. Newtons law of
cooling, Half life period, Surface area.
16. Boolean Algebra Boolean Algebra as an algebraic structure, Principle of duality, Boolean
function and switching circuits, Application of Boolean Algebra to
switching circuits.
17. Mathematical Logic Statements, Truth values of statement, Compound statement, Logical
connectives and truth table, Statement pattern and logical equivalence,
Tautology, Contradiction, Contingency, Applications of logic to switching
circuits, Quantifiers and quantified statements, Negation of compound
statement, Negation of quantified statement.
18. Matrices Definition and types of matrices, Algebra of matrices, Elementary
transformation and Inverse of Matrix by elementary transformation, Minors
and cofactor of elements, Adjoint of matrix, Inverse by adjoint method,
Solution of Linear Equations by reduction method and inversion method.
19. Plane Co ordinate Locus :definition of locus, Equation of locus, Point of locus, Shift of origin.
Geometry Line : Definition of line, slope of line, equation of lines in standard forms,
general equation, angle between two lines, point of intersection of lines,conditions of concurrent lines, distance of a point from a line, family of lines
Pair of straight lines : Pair of lines passing through origin, Pair of lines not
passing through origin. Condition that general second degree equation inx
andyrepresents a pair of lines, conditions of parallel lines and perpendicular
lines, angle between the lines represented by
2ax + 2hxy + by + 2gx+ 2fy+ c = o
Circle :Different forms of Equations of a circle, Standard equation, General
equation, Centre radius form, Parametric equation of a circle, Tangent and
normal, Equations of tangent and normal, condition of tangency to thestandard circle, Director circle, Length of tangent segment, tangent in terms
of slope,
Conics : Definition of conic, Equations of conics, Focus, Directrix,
Eccentricity, Classification of conics, Standard equations of parabola,
Ellipse, Hyperbola, Tangents and Normals, Equation of tangent and normal
at a point, condition of tangency, tangent in terms of slope. Number of
tangents from a point to conic (parabola, Ellipse, Hyperbola). Director
circle.
2
43
-
7/25/2019 BVP CET B.Tech Brochure 2016
46/58
20. Vectors Scalar and vector, Different types of vectors, Collinear vectors, Co-planar
vectors , Algebra of vectors , Addition of vectors, Scalar multiplication of
Vectors, Position vectors, Scalar products and its properties, Vector
products and its properties, Angle between two vectors, Collinearity and
Coplanarity of vectors, Section formula., Midpoint formula, Centroid
formula, Scalar triple product., Volume of parallelopiped, Applications of
vectors to Geometry. Applications of vectors to mechanics. Vector area of
triangle and parallelogram.
21. Three Dimensional Direction Cosines and Direction Ratios: Relation between direction
Geometry cosines and direction ratios, Angle between two lines, Condition of
perpendicular and parallel lines,
Line :Equation of line passing through given point and parallel to given
vector, Equation of line passing through given two points, (Vector and
Cartesian form), Plane: Equation of plane in different forms, Equation of
plane passing through three points, angle between two planes, (Vector and
Cartesian form). Distance of line from a point, Skew lines Distance between
skew lines. Distance between parallel lines.
Plane : Angle between line and plane, coplanarity of two lines. Distance of
a point from a plane. Equation of plane passing through the intersection of
two planes.
22. Linear Programming Solution of linear inequalities in one & two variable, Introduction of
concepts, Formation of linear programming problem, Graphical solution of
linear programming problem. Solution of linear programming problems by
graphical methods (a) ISO profit and ISO cost line (b) Corner method.
23. Statistics Measures of dispersion : Range, Mean Deviation, Variance and standard
deviation, Quartile deviation,
Bivariate frequency Distribution: Tabulation, Correlation, Scatter
diagram, Covariance, Karl Pearson's coefficient of correlation.
Probability : Events and Algebra of events, Definition of probability,
Addition theorem, Multiplication theorem, Conditional probability,
Independent events, Baye's theorem, Random variable, Discrete and
continuous random variable, Probability distribution of discrete and
continuous random variable. Binomial distribution, Bernoulli Trial,
Binomial distribution. Condition for Binomial Distribution. Mean and
variance of Binomial distribution. Normal distribution. Mean and variance
of Normal distribution. Standard Normal variables.44
-
7/25/2019 BVP CET B.Tech Brochure 2016
47/58
45
-
7/25/2019 BVP CET B.Tech Brochure 2016
48/58
46
-
7/25/2019 BVP CET B.Tech Brochure 2016
49/58
-
7/25/2019 BVP CET B.Tech Brochure 2016
50/58
48
-
7/25/2019 BVP CET B.Tech Brochure 2016
51/58
-
7/25/2019 BVP CET B.Tech Brochure 2016
52/58
ANNEXURE III
I, ................................................ son/daughter of ....................................... hereby solemnly affirm that
the following statements made by me are true to the best of my knowledge and belief,
A) I am a citizen of India
B) I have studied in class XI and XII in India and have passed a qualifying examination in the subjects of
Physics, Chemistry and Mathematics individually and have obtained at least 45 per cent (40% in case of
candidate belonging to reserved category) marks together in those subjects and I have also Passed in the
subject of English.
C) I have studied and understood the rules governing counselling, admission, procedure, fee structure and
agree to abide by these rules.
D) If admitted to any of the Institutions of the Bharati Vidyapeeth Deemed University, I will abide by all its
rules and regulations, especially those regarding discipline, attendance, dress code, examinations and
payment of fees. I understand that failure to comply with the rules and regulations will invite an
appropriate disciplinary action from the institutional authorities.
E) I will not involve myself in any action of ragging during the course of my education in this University.
I understand involvement in ragging would result into cancellation of my admission to the course.
Name of the candidate :
Date :
Place : Signature of the candidate
I, ............................................. the father/mother/guardian of ................................... an applicant for
admission to course at Bharati Vidyapeeth Deemed University, hereby solemnly affirm that all the above
statements made by son/daughter/ward are true to the best of my knowledge and belief. I will be responsible
for the payment of his/her fees on time and for his/her conduct.
Name of the parent/guardian
Relationship to candidate
Date
Address with Phone No. : Signature of the parent/guardian
DECLARATION
50
-
7/25/2019 BVP CET B.Tech Brochure 2016
53/58
5
Note :
As per the directions of Honble Supreme Court of India Order No. SLP(C) No. 24295/ 2004 and SLP No.
143656/ 2005, WP (C) No. 173/ 2006 and SLP(C) No. 24296-24299/ 2004 all the students are hereby
informed the following.
If any incidents of ragging comes to the notice of the authority, the concerned students shall be given liberty toexplain and if his explanation is not found satisfactory the authority would expel him from the institution.
All the students should note the above directives from the Supreme Court.
Registrar
(Bharati Vidyapeeth Deemed University)
The students and the parents will have to submit the printouts of antiragging
undertaking submitted online on the following websites
website 1: www.antiragging.in
2: www.amanmovement.org
This has to be submitted immediately after the conformation of the admission.
IMPORTANT NOTICE
-
7/25/2019 BVP CET B.Tech Brochure 2016
54/58
ANNEXURE IV
AUTHORISATION FOR REPRESENTATIVE
I, ..................................