Grill Gazebo

Please keep this instruction manual for future reference

Assembly Instructions & Users Manual

BRAND

FSMVPT3009

Customer Service: (888) 922-2336, 8:00am to 12:00am, CST

Live Chat @ Academy.com: 24/7

----------------------OR---------------------

Customer Service: (866) 905-4107, 8:30am to 5:00pm, PST, (11:30am to 8:00pm, CST), Monday thru Friday

(Made in China)

Warnings………………………………………………………………….2Tools and Hardware……………………………………………………..3Parts List……………..…………………………………………………...4Assembly Instructions………………………………………………..5-10Care and Maintenance……………………………………………........11Warranty Information………………………………………..................11

Table of Contents

Note: Before beginning assembly of product, make sure all parts are present. Compare parts with package content list, hardware, and parts list on page 3 & 4. If any part is missing or damaged do not attempt to assemble the unit. Contact customer service for replacement parts.

Page 1 of 11

Warnings

• Assemble the Gazebo on a soft, non-abrasive surface such as grass to avoid damage.

• This product is not intended for use during inclement or severe weather, that includes but is not limited to rain, hail, sleet, snow, wind, freezing conditions and extreme heat.

• When not in use, store and/or cover the product in a cool dry location.

• Do not use the product as a support. Do not shake, lean or climb on the Gazebo.

• Children under the age of 16 should not be engaged in assembly, removal or disassembly. Children under the age of 10 should be supervised by a competent adult when near the gazebo.

• This product is for residential use only. This product is NOT intended for commercial use and misuse will void the warranty.

• Item is heavy. Handle with care.• May require two adults for safe assembly.• Keep all flame and heat source away from this canopy

fabric. This canopy meets the flammability requirement of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the canopy fabric may render the flame-resistance properties ineffective.

• Weight limit: 75lbs (34.02kg) for each Bar counter top

Page 2 of 11

V Philips screwdriver (Included)

W Allen wrench (Included)

X Wrench (Included)

Tools Required

Hardware

Q ST5 * 10mm Self-tapping screw 16

R M6 * 20mm Wing bolt 12

S M6 * 30mm Wing bolt and nut 4

T Upper tube bolt 4

U Gazebo anchor kit 8

Page 3 of 11

Parts List

A Support post 1 2

B Support post 2 1

C Support post 3 1

D Panel 1 2

E Panel 2 2

F Upper canopy corner pole

4

G Bar counter top 2

H Center support hub 1

I U-shaped bracket 4

J Bottle opener 1

K Cap plate 4

L Post base 4

M Small canopy 1

N Large canopy 1

O Bar hook 6

P Top hook 1

Page 4 of 11

Assembly Instructions

Step 1:1) Attach U-shaped bracket (I) to the top of Support post 1 (A) using Upper tube bolt (T). Repeat this step for Support post 2 (B) and Support post 3 (C). So that all posts have an attached U-shaped bracket.2) Insert Support post 1 (A) into Cap plate (K), by moving it above the hole of Support post 1 (A), and then insert Post base (L) into Support post 1 (A), ensure that the tab on the Post base (L) pops into the secure hole on Support post 1 (A), then cover Cap plate (K) on Post base (L).Repeat this step for Support post 2 (B) and Support post 3 (C).

Step 2:Insert Panel 1 (D) into Support post 1 (A) and Support post 2 (B), then secure the Support post 1 (A), Support post 2 (B) and Panel 1 (D) using 2 X M6 * 20mm Wing bolts (R).

Page 5 of 11

Assembly Instructions

Step 3:Insert the Panel 1 (D) into Support post 1 (A) and Support post 3 (C), then secure the Support post 1 (A) , Support post 3 (C) and Panel 1 (D) using 2 X M6 * 20mm Wing bolts (R).

Step 4:Insert the Panel 2 (E) into Support post 1 (A) and Support post 2 (B), then secure the Support post 1 (A) ,Support post 2 (B) and Panel 2 (E) using 2 X M6 * 20mm Wing bolts (R). Repeat above step for another side of Support post 1 (A) and Support post 3 (C).

Page 6 of 11

Assembly Instructions

Step 5:

Attach the Bar hooks (O) to Bar counter top (G) using 12 X Self-tapping screws (Q) for both sides of Bar counter top (G) .

Step 6:1) Insert Bar counter tops (G) into Support post 1 (A) and Support post 2 (B). Secure the Bar counter top (G) to Support post 1(A) and Support post 2 (B) using 4 X M6 * 20mm Wing bolt (R).Repeat above step for another side of Support post 1 (A) and Support post 3 (C) .2) Attach the Bottle opener (J) to Support post 3 (C) using 4 X Self-tapping screw (Q).

Page 7 of 11

Assembly Instructions

Step 7:1) Insert Upper canopy corner poles (F) into the Center support hub (H).2) Screw the Top hook (P) into the Center support hub (H).

Step 8:Place large canopy (N) onto the assembled Upper canopy corner pole (F).

Page 8 of 11

Assembly Instructions

Step 9:Place the small canopy (M) onto the assembled Upper canopy corner pole (F) and then attach the four corners of small canopy (M) to Upper canopy corner pole(F) gently.

Step 10:Attach four corners of assembled Upper canopy corner pole (F) and U-shaped bracket (I) using 4 X M6 * 30mm Wing bolt and nuts (S).

Page 9 of 11

Assembly Instructions

Step 11:1) Attach the four corners of large canopy (N) to Upper canopy corner pole (F) gently. 2) Move the Cap plate (K) above the hole of Support post 1 (A), then insert Gazebo anchor kits(U) into the holes of Post base (L).Repeat above step for Support post 2 (B) and Support post 3 (C).

Page 10 of 11

Care and Maintenance

• For best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.

• Do not use abrasive materials or cleaners. • In order to prolong the use of the product, do not use

during inclement weather (rain, hail, sleet, snow, wind, fire, extreme heat and freezing conditions). The product should be stored in a dry, sheltered place.

• Use the Gazebo anchor kit to secure Gazebo. Additional Grounding anchors may be needed.

Warranty Information

This Product has been manufactured under the highest standards of quality and workmanship. We warrant to the original consumer purchaser that all aspects of this product will be free of defects in material and workmanship for one year from the date of purchase. A replacement for any defective part will be supplied free of charge for installation by the consumer. Defects or damage caused by the use of other than genuine parts are not covered by this warranty. This warranty shall be effective from the date of purchase as shown in the purchaser receipt.

This warranty is valid for the original consumer purchaser only and excludes industrial, commercial or business use of the product, product damage due to shipment or failure which results from alteration, product abuse, or product misuse, whether performed by a contractor, service company, or consumer. We will not be responsible for labor charges and/or damage incurred in installation, repair or replacement nor for incidental or consequential damage.

Page 11 of 11