1

BHG Courts Landing 12ft x 10ft Valance Gazebo ASSEMBLY INSTRUCTIONS ITEM# BH15 -092-099-16

ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE

INTENDED FOR RESIDENTIAL USE ONLY.

DON’T RETURN TO STORE

Questions, problems, missing parts with this product? Do not return to your retailer,please call our customer service department 9:00 a.m. to 5:00 p.m. Eastern Standard Time Monday through Friday Phone # 1-800-457-4652

contact us at www.numarkcustomerservice.com or

2

WARNINGS AND CAUTIONS

CLEANING AND MAINTENANCE

Keep all flame and heat sources away from canopy fabric.The canopy is made with flame-resistant fabric which meets CPAI-84 specifications. It is not fireproof. The canopy fabric will burn if left in continuous contact with flame source. The application of any foreign substance to the canopy fabric mayrender the flame-resistant properties ineffective with.

＊

＊

Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not

use bleach or solvents. Cover furniture with outdoor furniture covers when not in use.

This gazebo is made for explicit purpose of providing limited outdoor sun shade and is

not to be used as a toy, shelter or tent. This pergola is not intended for inclement weather

in any form including, but not limited to: rain, hail, sleet, snow and/or wind. Do not locate

structure near any open flame. Do not use structure as a support. Do not shake, lean or

climb on structure. Children under age of 10, near the structure, should be supervised by

a competent adult at all times.

＊

Read through all the instructions before beginning assembly. Unpack and identify

all the parts.

Assembly by four people is recommended.

Estimated Assembly Time: 90 minutes

＊

＊

＊

DON’T RETURN TO STORE

Remove all components from the polybag and unwrap all package materials. Please count the components, there are:

NO. Part Description Quantity

A

A2

Slim Bar

B21

B2

G

2

Short Panel

H

4

3

Short Slim Bar

B1

8

I

D1

E

F1 1

4

Post Base

Leg Post

Canopy Frame

Base Plate

DON’T RETURN TO STORE

A1 2

2

2

2C1

2

H

2

2

4

1

Long Slim Bar

Long Panel

Supporting Bar

Net

Canopy Connection Bar

Canopy Fabric

Short Slim Bar

Long Slim Bar

C2

C3

C4

Short Panel

Long Panel

Post Top DecorativeD2

F2

J

2

4

4

4

4

4

DON’T RETURN TO STORE

5

NO. Part Description Quantity

K1 8+1 spare

K2

K3 48+2 spare

K4 M6x25L Bolt

K5

M6 Metal Washer

K6 122

K7

K8

K9

K10

K11 1

Lawn Stake

Allen Wrench

K12

ACCESSORIES

K13 2

K14

1

M6x30L Bolt

4

Assembly instructions sheet

Canopy Decorative Finial

DON’T RETURN TO STORE

1

Counter Sink Bolt

50+2 spare

M6x20L Bolt

4

16+1 spare

M6 Nut

L-shaped Bracket

M6x15L Bolt

K15

K16

Triangle Bracket

S-Hook

Open Hex Wrench

Long Allen Wrench

4

4

16

1

1

Step 1

K6 x 4

K2 x 4

Repeat procedure for the other pair B1&B2.

NOTE: Please strictly complying with the graphic to tighten the bolts.

M6 Metal Washer

M6x15L Bolt

Step 2

K6 x 6K2 x 6

M6 Metal WasherM6x15L Bolt

Do not tighten completely.

6

DON’T RETURN TO STORE

Repeat procedure for the other pair A1&A2.Do not tighten completely.

NOTE: Please strictly complying with the graphic to tighten the bolts.

Step 3

Step 4

7

DON’T RETURN TO STORE

Do not tighten completely.

Repeat procedure for the other pair C1 and C2.

NOTE: The 2 brackets should be meanwhile inserted into the holes.

K6 x 8

K3 x 8

M6 Metal Washer

M6x20L Bolt

K8 x 4

L-Shaped Bracket

K6 x 8K2 x 8

M6 Metal WasherM6x15L Bolt

Repeat procedure for the other three corners.

NOTE: Please use the middle hole only for this step.

Do not tighten completely.

Step 5

8

DON’T RETURN TO STORE

Step 6

Do not tighten completely.

K6 x 8

K2 x 8

M6 Metal Washer

M6x15L Bolt

Repeat procedure for the other pair C3 and C4.

K2 x 4

M6x15L Bolt

K6 x 28

M6 Metal Washer

K3 x 24

M6x20L Bolt

NOTE: (1)The ‘inside’ means the panel with the bracket should face inside.

Repeat procedure for the other three post top decorative D2.

NOTE: The 2 brackets should be meanwhile inserted into the holes.Do not tighten completely.

(2)The blank side of the post top decorative should face inside.

Step 7

Repeat procedure for the other three brackets.

9

DON’T RETURN TO STORE

Step 7

K3 x 8

M6x20L Bolt

K6 x 8

M6 Metal Washer

Do not tighten completely.NOTE: the oblique side should be upside for the bracket K9.

K4 x 4

M6x25L Bolt

K6 x 8

M6 Metal Washer

K7 x 4

M6 Nut

Repeat procedure for the other three bars F2.Do not tighten completely.NOTE: The side with the label’TOP’ should be upside on the bar F2

Step 8

10

DON’T RETURN TO STORE

Step 9

Repeat procedure for the other three brackets K9.

Do not tighten completely.

K11 x 1

Canopy Decorative Finial

K2 x 4

M6x15L Bolt

K3 x 8

M6x20L Bolt

K6 x 12

M6 Metal Washer

Step 10

11

DON’T RETURN TO STORE

Repeat procedure for the other three legs.

Step 11

K1 x 8

Counter Sink Bolt

Repeat procedure for the other three legs D1.

Tighten all above the step’s bolts.

K2 x 16

M6x15L Bolt

K6 x 16

M6 Metal Washer

NOTE:The side with the counter sink hole should be outside for the bracket J.

Tighten all the bolts.

Step 12

12

DON’T RETURN TO STORE

Step 13

NOTE: the side with the label’short’ on the canopy fabric should be correspondent with the side marking the ‘short’ label on the slim bar.

K5 x 16

M6x30L Bolt

K6 x 16

M6 Metal Washer

Repeat procedure for the other supporting bars E. Tighten all the bolts.

K10 x 1

M6 Metal Washer

Step 14

13

DON’T RETURN TO STORE

Step 15

K12 x 16

Lawn Stake

NOTE: The entrance of the nets should be in the middle of the 2 leg post D1.

14

DON’T RETURN TO STORE

Printed in China.

Step 16

Now you can use your gazebo!.