Beverage Brochure English
description
Transcript of Beverage Brochure English
-
RELIABLE BEYOND LIMITS
HIGH PRESSURE COMPRESSORS PET BLOW-MOULDING / CO2 RECOVERY
-
02
ABOUTABC COMPRESSORS
Since its foundation in 1943, ABC has focused on providing the most reliable compressors for different sectors and applications. Its global orientation and the commitment for growth was shown from its early exports in the 50s to its latest geographical expansion, having delivered compressors in more than 120 countries.
Becoming a worldwide benchmark in the piston compressor industry has always been ABCs goal, and today it has turned into reality. The company is continuously expanding and consolidating as a global solution supplier, with more robust and efficient compressors. New assembly plants in China and Brazil, and the endless opening of new service outlets worldwide are the best proof of such growth.
ABC offers a wide range of reciprocating compressors and provides tailored solutions covering air and numerous industrial gases.
PETROCHEMICAL
WASTE TREATMENT BIOGAS
PET BLOWING CO2 RECOVERY
COGENERATION NATURAL GAS
OTHER APPLICATIONS
A I R A N D G A S C O M P R E S S O R S
INDUSTRIAL GASES
ABC HEADQUARTERS SPAIN EIBAR
ABC CHINAWUJIANG
ABC BRAZILITUPEVA
Air, Hydrogen, Nitrogen, Methane, Carbon dioxide, Freon, Natural Gas, Vinyl chloride, Methyl chloride, Ethylene, Propylene, Sulphur dioxide, Butadiene, Isobutene, Isobutane, Butane, Propane, Carbon monoxide, Synthesis gas, Biogas and Syngas... except for Oxygen and Acetylene.
Piston compressors with up to 3 pairs of double-acting cylinders, with or without lubrication. Up to 6 stages of compression, mounted on a structural steel skid.
Up to 1.200 kW
Up to 150 bar
CONFIGURATION
GASES POWER
PRESSURE
-
03
ABC Headquarters, Eibar100% testing ensures no surprises
ENERGY EFFICIENCY
Market leader in kWh/Nm3.
Lowest total cost of ownership.
ENDURANCE
Total guarantee and efficiency in extremely demanding conditions.
Maximum part durability.
EASY TO INSTALL
Quick start up and mobility.
No vibration isolation required.
Reduced installation space.
Training on site.
Up to 5 years of guarantee.
24 hours x 365 days of operation.
Service starting from 8.000 hours.
Minimum vibration and noise.
RELIABILITY Design with up to six horizontally-opposed cylinders.
Low linear piston speed.
Low operating forces, minimizing wear and tear on structural
elements.
Integral factory test with all peripherical equipment.
Isothermic cycle adjustment through correct cylinder and
cooling combination.
Large valve outlet opening surface area.
Double acting cylinder construction, minimising air loss and
maximising wearable part life.
Compressor packaged construction on a single skid with
electrical, pneumatic, vent connections... factory prepared.
Minimal water, electrical, vent connections.
ABC has been a pioneering supplier of compressor packages for food and beverage industry with high pressure solutions for PET blowing and CO2 recovery systems. Since early 1980s ABC has installed more than 2.500 compressor packages in 110 countries, in cooperation with converters, bottlers and engineering companies.
ABC installations are supported world-wide by more than 100 field technicians, located strategically to assure quick response and local spare part availability.
Designed to run in demanding conditions: continuous
operation, high temperatures, high altitudes
Coolers adapted to demanding conditions.
Low discharge temperatures, ensuring long life for valves,
packings, rings and other elements subject to wear and
tear.
Motors (IP55) and cabinets (minimum IP54) protected from
environmental incidents.
-
H O R I Z O N TA L C O N F I G U R AT I O N W I T H O P P O S I N G C Y L I N D E R S
BALANCE OF FORCE AND TORQUE
27090 180
Primary force ResultSecondary force
4HA-4-TER-LT
4HA-4-TER-LTup to 860 m3/h
PET Compressor
04
ABC compressor construction starts with a robust frame and sump, providing generous pressurized lubrication to all crankshaft and rod bearings, and ending with double friction bearings on the drive side.
Cylinders are horizontally opposed, with crankpins displaced by 180, cancelling out the inertia loads and virtually eliminating all vibration.
The useful life of mechanical parts is significantly lengthened because they do not transmit excessive force or produce fatigue on structural parts of the compressor, ensuring stability of the pipes.
No anti-vibration or special foundations are required, only 2 kg/cm2 soil loading.
Compressor and all peripheral components are mounted on a single skid to form a complete self-contained, reliable air system.
-
C O M P L E T E C O M P R E S S O R PA C K A G E
Easy and safe mobility 100% inhouse machined parts
PET Compressor3THA-3-LTup to 525 m3/h
PET Compressor3HA-4-TER-LTup to 1.443 m3/h
05
The compressor package is supplied complete with compressor, motor, electrical cabinet, air receiver, and refrigerated dryer, forming a compact but complete compressor system. CO2 compressor packages include bare compressor, motor and electric cabinet on skid ready to be integrated with the CO2 recovery plant.
Electrical connections and cabling, pneumatics, refrigeration, etc, are all factory prepared.
Centralised control of the entire ensemble from a single panel.
A single water input and output connection point.
A single electricity supply.
A single condensate removal point.
No high pressure air flexible pipes needed.
Integral testing, with peripherals, before shipment.
Possibility of transport by container without disassembly.
Quick, simple and safe start-up in the customers plant with guaranteed success.
Ample space between equipment for convenient maintenance.
Complete package mobility, which provides easy relocation with minimal resources.
-
E N E R G Y S AV I N G
CYLINDER TYPES
ABC Double Acting
EFFICIENT DESIGN FREQUENCY CONVERTER REINJECTION
The compressor is 10% more efficient than any other compressor on the market
Perfectly adapted, the ABC compressor provides 15% energy savings
Our four-stage reinjection process means a 50% saving in compression energy
PET BLOWING application
4HA-6-TRIS-LTup to 2.321 m3/h
PET Compressor
06
EFFICIENT DESIGN
With savings of up to 15% of real energy consumption, the ABC design gives optimum performance.
This energy savings guarantees the most competitive total operating cost (energy consumption + cost of the machine + maintenance), and has a significant impact on consumption, since energy costs are 80% of the total cost of the compressor throughout its useful life.
Double-acting cylinders minimise leaks and premature wear and tear.
With a wide range of double-acting cylinders, ABC is able to balance compression ratios, thereby improving efficiency and lowering energy consumption.
Generous cooling between stages.
Large stainless-steel valve outlet surfaces, reduces pressure drops.
When unloaded, venting the intercoolers is not required, another way we increase efficiency and lower energy consumption.
Up to four-stage compression design optimises the compression cycle facilitating the removal of the heat generated during the compression process.
Adaptation of independent vents per stage, preventing leaks.
Large-capacity air receiver for more precise regulation, extending the life of the valve unloaders.
The soft starter is supplied on all ABC packages above 200 kW, and is optional for compressors of lower power. This eliminates inrush current, thereby avoiding costly peak charges.
When coordinating systems with several compressors, ABC offers intelligent systems that make it possible to select and prioritise the start up of the compressors according to the demand for compressed air.
The ABC compressor can be furnished with optional energy saving systems which can be supplied with the compressor package, or retrofitted at a later date.
Lower energy consumption Without air leaks Lower temperatures in operation Longer durability of parts Better regulation
-
Room-air
Reinjected air
Cylinder Inter/aftercoolers
Filter
Blow-moulding air
Receiver
Dryer Filter
1st stage
2nd stage
3rd stage
4th stage
REINJECTION IN FOUR STAGES
Reinjection system Frequency converter
COMPRESSION CYCLE
P44
P34
P23
P13
P24
P14
P33
P2
P1
P1
P2
P3 P3P
Energy consumption
ABC four stages
ABC three stages
Standard three stages
V
4HA-6-TER-LTup to 1.700 m3/h
Compressor PET
07
FREQUENCY CONVERTER
ABC offers variable speed drives, VSD, which make it possible to reduce or eliminate the compressor valve unloading which uses energy without producing compressed air.
The balanced mechanical design of the ABC compressor permits it to operate at a slow rotational speed, while maintaining sufficient lubrication to all mechanical parts and control of the rotational inertia forces.
ABC takes full advantage of the variable frequency converter features, allowing a wide range of capacity control of up to 50% of the speed range.
REINJECTION SYSTEM
When the customer opts for air recovery from the stretched blowing machine, ABC re-injects it inside the compressor with a subsequent energy saving. Additionally, thanks to four stages of compression, up to 50% of the energy required for compression is saved (re-injected into the 3rd stage), as opposed to the 33% saving achieved in the three-stage compression, where it is re-injected into the second stage.
-
F O U R - O R T H R E E - S TA G E C O M P R E S S I O N
C. R. = Compression Ratio
4HP-4-LTup to 3.087 m3/h
PET Compressor
3HP-4-LTup to 4.135 m3/h
PET Compressor
08
Four-stage compressors have the most superior technical attributes; lower cylinder temperatures, less operating stress on structural elements, which immediately lengthens the useful life of valve, rings, gaskets, etc.
Depending on the location of the installation and the characteristics of the surroundings, the ABC compressor package is supplied in four- or three-stage configurations. The four-stage configuration is especially suitable for installation in the following circumstances:
High altitudes where ambient inlet pressure is low and a high compression ratio is encountered.
High room temperatures due to the ambient conditions of the plant installation.
Very demanding work conditions, where the equipment is subjected to tougher-than-usual conditions.
Installations in which longer time between maintenance cycles is required.
Final Pressure 42 bar
3-stages
C.R.: 59
C.R.: 424-stages
Sea level: 1,013 bar
2.800m: 0,72 barAtmospheric
pressure
Four stages vs three stages
-
C L O S E D C O O L I N G W AT E R S Y S T E M S
4HP-6-LT complete package
4HP-6-LTup to 6.004 m3/h
PET Compressor
09
The 4HP-6-LT model, the largest in power and capacity of ABC, completes a cycle of market-adapted powers and products, becoming the largest reciprocating compressor of the PET market.
4HP-6-LT compressor, supplied with a 1.000kW motor, delivers 6.000m/h flow, more than the 80% above other large alternative machines of the market.
For installations where cooling water isnt available or is of poor quality, ABC offers a complete line of packaged closed cooling water systems.
Water/water: Closed-type cooling towers.
Water/air: Air-cooled radiators with no water consumption, including adiabatic types.
The control panel monitors and operates the cooling system according to the working requirements of the compressor.
Cooling systems include all pumps, valves, instruments and receiver necessary to monitor and control the coolant required for the entire compressor package all mounted on a compact skid.
-
D I R E C T C O U P L I N G
As an optional feature to standard belt driven transmission, ABC offers direct coupled compressors for the whole PET range (with gear box depending on the capacity).
Main bottlers and key players worldwide have already trusted on direct coupled ABC solution. This assures an additional 3% energy saving to ABCs standard efficiency, already accepted as best one in the market.
4HA-6-TER-LTup to 1.700 m3/h
Direct couplingPET Compressor
4HP-6-LTup to 6.004 m3/h
Direct couplingPET Compressor
4HA-6-TRIS-LTup to 2.321 m3/h
Direct couplingPET Compressor
10
-
ModEL STAGES CYLINdERSmm
CAPACITY FAd*
m3/h / cfm
ABSoRBEd PoWER kW / HP
IP55 SoFT START
PLC+
ToUCH SCREEN
FREQUENCY CoNVERTER
REINJECTIoN SYSTEM
CoMPLETE PACKAGE
CoNVERTER REGULATIoN UP To, %SET oN SKId**
FooTPRINT m2
3THA-3-LT 3
250 315 186 51 70
m m m 59 m 9,6175 416 245 68 92
85 525 310 87 118
4HA-4-TER-LT 4
310 613
722
860
362
426
507
96
115
142
130
156
193
m m m 49 m 12,2185
125
75
3HA-4-LT 3
2x250
1.031 608 161 219 m m m 46 m 12,9160
95
3HA-4-TER-LT 3
2x310 1.140
1.443
673
851
173
229
235
311m m m 46 m 12,9185
105
4HA-6-TER-LT 4
2x3101.563 922 241 328
m 49 m 15,52x185
1401.700 1.003 267 363
95
4HA-6-TRIS-LT 4
3x310 2.026
2.243
2.321
1.195
1.323
1.369
309
350
365
420
476
496
m 49 m 16,4240
165
115
4HP-4-LT 4
580 2.650
2.907
3.087
1.564
1.715
1.821
394
437
469
535
594
637
m 62 m 31,9370
230
145
3HP-4-LT 3
2x450 3.351 1.977 488 663
m 56 m 28,2300 3.758 2.217 553 752
175 4.135 2.440 614 834
4HP-6-LT 4
2x5805.400 3.186 786 1.068
m 62 m 46,72x370
2656.004 3.542 889 1.208
175
P E T R A N G E
PERFECT BLOWN AIR QUALITY
Included m Optional
11
Calculated for 50Hz frequency* Sea level, 35C, 40 bar** Complete package: compressor, motor, receiver, dryer and electric cabinet on skid, with interconnected elements from origin.
30 bar range also available and boosters adapted to clients specific installation. Learn more through your sales contact.
The quality of the air exceeds the standard based on ISO 8573-1: Oils: Class 0 Particles: Class 0 Humidity: Class 4
Lubrication-free cylinders guarantee 100% total absence of oil.
Filtration system at the dryer outlet is standard, removing solid particles.
F O U R - A N D T H R E E - S TA G E AT M O S P H E R I C C O M P R E S S O R S - 4 2 B A R
-
ABCs CO2 compressor range is prepared to compress saturated CO2 guaranteeing the maximum robustness and reliability:
Horizontal opposed cylinders.
2 compression stages.
Double acting cylinders.
Water cooled.
Oil-free.
ABC cooperates with engineering companies responsible for designing and implementing CO2 recovery systems, being also in direct contact with breweries and other end users.
ABCs compressors are customized according to the project requirements, delivering complete units (bare compressor, motor and electric cabinet, everything on skid) or bare compressors to be packaged by the engineering company responsible for the turn-key recovery system.
ABC compressors are prepared for continuous 8000 hours work without any spare part replacement, allowing the highest machine availability.
Moreover, with the horizontal arrangement of the cylinders, there is no need for special elevation tools or cranes during regular maintenance jobs.
LONG SERVICE CYCLE
Thanks to its horizontal arrangement with opposed double acting cylinders, together with big flow area valves operating much below their nominal characteristics, ABC offers the lowest consumption ratio of the market.
ENERGY EFFICIENCY
12
CO2 RECOVERY APPLICATION
2EHA-2-LTup to 766 kg/h
CO2 Compressor
2EHA-4-GT up to 1.531 kg/h
CO2 Compressor
-
Two extra long chamber blocks between casing and cylinders. Cylinder side chamber is large enough to avoid the piston rod part in contact with the mechanical elements could get in contact with the packing. An oil thrower at the rod avoids the oil to advance along the piston rod.
OIL FREE CYLINDERS
Light alloy pistons, with teflon segments.
Stainless steel piston rods.
Automatic valves, in 13% Cr stainless steel, big flow area.
Water cooled intercooler in stainless steel bundle type, dilatable, demountable, flowing gas through the inner part and water through the outer part undercurrent.
Water cooled after cooler, water separator, horizontal arrangement, providing 10C difference between inlet cooling water and gas outlet temperatures, stainless steel bundle type, dilatable, demountable, flowing gas through the inner part and water through the outer part undercurrent.
PROTECTED AGAINST CORROSION
Fitted with stainless steel inlet and outlet dampeners and equipped with: safety valves, manual condensate drain traps, and pressure and temperature ports.
Thermostatic valves in every cylinder.
13
BREWERY PLANT
MODEL: 3 x 2EHA-2-GT
INSTALLED POWER: 3 x 45 kW
FLOW: 3 x 500 kg/h
BREWERY PLANT
MODEL: 2 x 2EHA-4-GT
INSTALLED POWER: 2 x 90 kW
FLOW: 2 x 1.000 kg/h
-
14
CO2 C O M P R E S S O R S - 2 0 B A R
CO2 R A N G E
Regulation: 0-50%-100% Electrical parts with IP55 protection Wye Delta / Soft Start / VSD availableNA: Not available
ModEL STAGES CYLINdERSmm
SUCTIoN PRESSURE 1,013 barA SUCTIoN PRESSURE 1,200 barA
FooTPRINT m2
CAPACITYkg / h
INSTALLEd PoWER kW / HP
ABSoRBEd PoWERkW / HP
CAPACITYkg / h
INSTALLEd PoWER kW / HP
ABSoRBEd PoWERkW / HP
2EHA-2-GT 2 250 / 125
408 35 50 33 45 NA
4,3
495 45 60 39 54 536 45 60 39 54
623 55 75 50 68 673 55 75 49 67
766 75 100 62 85 878 75 100 66 90
NA 934 90 125 71 97
2EHA-4-GT 22x250 /2x125
1.031 90 125 82 112 1.121 90 125 82 112
6,51.235 110 150 98 134 1.345 110 150 99 134
1.460 132 180 118 161 1.594 132 180 118 161
1.531 160 220 125 170 1.868 160 220 142 193
2EHA-6-GT 23x250 /3x125
1.822 160 220 145 197 1.962 160 220 144 195
9,12.190 200 270 177 241 2.392 200 270 177 241
2.297 250 340 187 255 2.803 250 340 213 290
ModEL STAGES CYLINdERSmm
SUCTIoN PRESSURE 1,013 barA SUCTIoN PRESSURE 1,300 barA
FooTPRINT m2
CAPACITYkg / h
INSTALLEd PoWER kW / HP
ABSoRBEd PoWERkW / HP
CAPACITYkg / h
INSTALLEd PoWER kW / HP
ABSoRBEd PoWERkW / HP
2EHP-2-GT 2 450 / 230
2.254 200 270 177 241 2.535 200 270 177 241
12,52.805 250 340 223 303 3.151 250 340 222 302
3.146 315 425 254 345 3.836 315 425 277 377
NA 4.110 355 480 301 409
2EHP-4-GT 22x450 /2x230
4.194 355 480 314 427 NA
25,6
4.719 400 545 356 483 5.343 400 545 358 486
5.767 500 680 445 604 6.508 500 680 444 604
6.292 560 760 493 670 7.193 560 760 498 678
NA7.878 630 875 556 756
8.221 710 965 586 787
2EHP-6-GT 23x450 /3x230
6.685 560 760 499 678 NA
34,0
7.392 625 850 556 756 8.323 625 850 556 756
8.258 710 965 629 856 9.351 710 965 632 859
9.201 800 1.088 715 972 10.379 800 1.088 712 968
9.437 900 1.200 736 1.001 11.406 900 1.200 796 1.082
NA 12.331 1.000 1.360 876 1.191
2EHP-4-LTup to 6.292 kg/h
CO2 Compressor
ABC CO2 compressors are designed using interchangeable cylinders. Thanks to that, all compressors share the same spare parts, allowing a cost effective and easy maintenance.
100 % INTERCHANGEABLE PARTS
L O W A N D M E D I U M C A PA C I T Y
H I G H C A PA C I T Y
-
15
Its products and services are aimed at optimizing clients air or gas compression system. Improvement of regulation system, systems for coordination of batteries of machines, up-grading of compressors, energy saving methods, consultancy and plant audits.
A B i l i t y I M P R O V E R
Through a wide network of service offices in more than 20 countries, with more than 100 field technicians and stock of spares strategically distributed throughout the world, ABC en-sures the best technical support for the start-up, maintenance and monitoring of compressors.
ABC considers it important to help clients monitor their in-ternational compressor network quickly and efficiently. Con-sequently, the REMOTE CONTROLLER ABility Eye, with its three levels of surveillance, becomes the perfect tool to keep the compressor room under control.
In order to grant the best long-term operating guidelines of the compressors and to keep the maintenance cost contro-lled from the very beginning, ABC offers FULL SERVICE, maintenance contracts, with extended guarantee up to five years.
ABility ACADEMY
ABC offers clients and field specialists complete training pro-grams, to ensure that only the best technical guidelines are used when diagnosing and operating the compressors.
After more than 60 years in the market, ABC works to strengthen long-term relationships with clients, supplying not only the best customized products, but also the complete service package for their whole life cycle.
ABility Services cover the services from the initial design of compressor, its start-up to its operation, providing the fo-llowing range of services, as well as technical solutions:
ABility CONTRACT
ABility EYE
LAUNCHING oPERATIoN MACHINE UPGRAdING
ABCproductivity
AVERAGE productivity
STARTING-UP
MACHINE UPGRADING
PREVENTIVE AND CORRECTIVE MAINTENANCE
ORIGINAL SPARE PARTS
TRAINING AND TECHNICAL CONSULTANCY
DESIGN / ENGINEERING
ABility NETWORK
Energy audit
For additional information browse our Service Catalogue or visit our website www.abc-compressors.com
Ability services
-
02/
2013
TOTAL QUALITYISo 9001
ISo 14001oHSAS 18001
HEADQUARTEREibarPolgono Azitain n 6 P.O.Box 8720600 EIBAR (Guipzcoa) SPAIN
Tel.: +34 943 820 400Fax: +34 943 820 235
Contact with our INTERNATIONAL NETWORK through:
www.abc-compressors.com
PRODUCTION PLANT
ASSEMBLY PLANT
COMMERCIAL OFFICE / SERVICE