BAS116QA - Nexperia

BAS116QALow-leakage diode3 May 2016 Product data sheet

1. General descriptionSingle low-leakage current switching diode encapsulated in a leadless ultra small DFN1010D-3(SOT1215) Surface-Mounted Device (SMD) plastic package with visible and solderable side pads.

2. Features and benefits• High switching speed: trr = 0.8 µs• Low leakage current: IR = 3 pA• Repetitive peak reverse voltage VRRM ≤ 85 V• Low capacitance Cd = 2 pF• Ultra small SMD plastic package• Low package height of 0.37 mm• Suitable for Automatic Optical Inspection (AOI) of solder joint• AEC-Q101 qualified

3. Applications• Low-leakage current applications• General-purpose switching

4. Quick reference data

Table 1. Quick reference dataSymbol Parameter Conditions Min Typ Max Unit

VRRM repetitive peak reversevoltage

Tj = 25 °C - - 85 V

IF forward current Tamb = 25 °C [1] - - 300 mA

VR reverse voltage Tj = 25 °C - - 75 V

VF forward voltage IF = 150 mA; Tj = 25 °C - - 1.25 V

IR reverse current VR = 75 V; Tj = 25 °C - 0.003 5 nA

trr reverse recovery time IF = 10 mA; IR = 10 mA; IR(meas) = 1 mA;RL = 100 Ω; Tamb = 25 °C

- 0.8 3 µs

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.

© Nexperia B.V. 2017. All rights reserved

Nexperia BAS116QALow-leakage diode

BAS116QA All information provided in this document is subject to legal disclaimers.

Product data sheet 3 May 2016 2 / 12

5. Pinning information

Table 2. Pinning informationPin Symbol Description Simplified outline Graphic symbol

1 A anode

2 n.c. not connected

3 K cathode

4 K cathode

Transparent top view

1

2

34

DFN1010D-3 (SOT1215)

aaa-021941

A

n.c.

K

6. Ordering information

Table 3. Ordering informationPackageType number

Name Description Version

BAS116QA DFN1010D-3 DFN1010D-3: plastic thermal enhanced ultra thin small outlinepackage; no leads; 3 terminals; body 1.1 x 1.0 x 0.37 mm

SOT1215

7. Marking

Table 4. Marking codesType number Marking code

BAS116QA Z 110

MARKING CODE(EXAMPLE)

PIN 1 INDICATION MARK VENDOR CODE

YEAR DATECODE

READING DIRECTION

READING EXAMPLE:

aaa-020723

MARK-FREE AREAA 110

Fig. 1. DFN1010D-3 (SOT1215) binary marking code description





8. Limiting values

Table 5. Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit

VR reverse voltage - 75 V

VRRM repetitive peak reversevoltage

Tj = 25 °C

- 85 V

IF forward current Tamb = 25 °C [1] - 300 mA

IFRM repetitive peak forwardcurrent

tp ≤ 0.5 ms; δ ≤ 0.25 ; Tj = 25 °C - 700 mA

tp = 100 µs; Tj(init) = 25 °C; square wave - 4 A

tp = 1 ms; Tj(init) = 25 °C; square wave - 1.5 A

IFSM non-repetitive peakforward current

tp = 1 s; Tj(init) = 25 °C; square wave - 0.5 A

[1] - 305 mWPtot total power dissipation Tamb ≤ 25 °C

[2] - 470 mW

Tj junction temperature - 150 °C

Tamb ambient temperature -55 150 °C

Tstg storage temperature -65 150 °C

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard footprint.[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm².

Tamb (°C)17512525 150100500 75

aaa-022960

0.2

0.1

0.3

0.4

IF(A)

0.0

FR4 PCB, standard footprint

Fig. 2. Forward current as a function of ambient temperature; derating curve





9. Thermal characteristics

Table 6. Thermal characteristicsSymbol Parameter Conditions Min Typ Max Unit

[1] - - 410 K/WRth(j-a) thermal resistancefrom junction toambient

in free air

[2] - - 265 K/W

Rth(j-sp) thermal resistancefrom junction to solderpoint

[3] - - 55 K/W

[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.[2] Device mounted on an FR4 PCB, single-sided copper, tin-plated, mounting pad for cathode 1 cm².[3] Soldering point of cathode tab.

aaa-021943

10-5 1010-210-4 10210-1tp (s)

10-3 1031

102

10

103

Zth(j-a)(K/W)

1

0

duty cycle =1

0.750.5

0.330.25

0.2

0.10.05

0.020.01

FR4 PCB, standard footprint

Fig. 3. Transient thermal impedance from junction to ambient as a function of pulse duration; typical valuesaaa-021944

10-5 1010-210-4 10210-1tp (s)

10-3 1031

102

10

103

Zth(j-a)(K/W)

1

0

duty cycle =1

0.750.5

0.330.25

0.2

0.10.05

0.020.01

FR4 PCB, mounting pad for cathode 1 cm²

Fig. 4. Transient thermal impedance from junction to ambient as a function of pulse duration; typical values





10. Characteristics

Table 7. CharacteristicsSymbol Parameter Conditions Min Typ Max Unit

IF = 1 mA; Tj = 25 °C - - 0.9 V

IF = 10 mA; Tj = 25 °C - - 1 V

IF = 50 mA; Tj = 25 °C - - 1.1 V

VF forward voltage

IF = 150 mA; Tj = 25 °C - - 1.25 V

VR = 75 V; Tj = 25 °C - 0.003 5 nAIR reverse current

VR = 75 V; Tj = 150 °C - 3 80 nA

Cd diode capacitance VR = 0 V; f = 1 MHz; Tj = 25 °C - 2 - pF

trr reverse recovery time IF = 10 mA; IR = 10 mA; IR(meas) = 1 mA;RL = 100 Ω; Tamb = 25 °C

- 0.8 3 µs

aaa-022961

10-3

10-2

10-1

1

IF(A)

10-4

VF (V)0.0 2.01.50.5 1.0

(1)

(2)(3)

(4)

(1) Tj = 150 °C(2) Tj = 85 °C(3) Tj = 25 °C(4) Tj = −40 °C

Fig. 5. Forward current as a function of forward voltage;typical values

102

150 200500

mlb754

100

10

1

10- 1

10- 2

10- 3

IR(nA)

Tj (°C)

(1)

(2)

VR = 75 V(1) Maximum values(2) Typical values

Fig. 6. Reverse current as a function of junctiontemperature





VR (V)0 252010 155

aaa-022962

1.0

0.5

1.5

2.0

Cd(pF)

0.0

f = 1 MHz; Tamb = 25 °C

Fig. 7. Diode capacitance as a function of reversevoltage; typical values

aaa-020909

tp (ms)10-1 1031021 10

1

10

IFSM(A)

10-1

Based on square wave currents.Tamb = 25 °C

Fig. 8. Non-repetitive forward current as a function ofpulse duration; maximum values

11. Test information

trr

(1)

+ IFt

output signal

tr tpt

10 %

90 %VR

input signal

V = VR + IF × RS

RS = 50 Ω IF

D.U.T.

Ri = 50 Ω

SAMPLINGOSCILLOSCOPE

mga881

(1) IR = 1 mA

Fig. 9. Reverse recovery time test circuit and waveforms

Quality informationThis product has been qualified in accordance with the Automotive Electronics Council (AEC)standard Q101 - Stress test qualification for discrete semiconductors, and is suitable for use inautomotive applications.





12. Package outline (minimized)

13-03-05Dimensions in mm

0.220.30

0.75

0.340.40

0.04max

0.951.05 0.1

0.170.25

0.160.24

0.1950.275

0.2450.325 1.05

1.15

0.870.95

1 2

3

Fig. 10. Package outline DFN1010D-3 (SOT1215)





13. Soldering

SOT1215Footprint information for reflow soldering of DFN1010D-3 package

sot1215_fr

solder land

solder resist

solder land plus solder paste

occupied area

Dimensions in mm

Issue date 12-11-2313-03-06

0.3

0.75

1.1

0.40.35 (2x)

0.45 (2x) 0.3

1.2

0.25 (2x)

0.5

0.4

0.5

1.41.5

0.3

0.3

0.4

0.5

1.3

0.4

0.4

0.5 1.3

Fig. 11. Reflow soldering footprint for DFN1010D-3 (SOT1215)





14. Revision history

Table 8. Revision historyData sheet ID Release date Data sheet status Change notice Supersedes

BAS116QA v.1 20160503 Product data sheet - -





15. Legal information

Data sheet status

Documentstatus [1][2]

Productstatus [3]

Definition

Objective[short] datasheet

Development This document contains data fromthe objective specification for productdevelopment.

Preliminary[short] datasheet

Qualification This document contains data from thepreliminary specification.

Product[short] datasheet

Production This document contains the productspecification.

[1] Please consult the most recently issued document before initiating orcompleting a design.

[2] The term 'short data sheet' is explained in section "Definitions".[3] The product status of device(s) described in this document may have

changed since this document was published and may differ in case ofmultiple devices. The latest product status information is available onthe Internet at URL http://www.nexperia.com.

DefinitionsPreview — The document is a preview version only. The document is stillsubject to formal approval, which may result in modifications or additions.Nexperia does not give any representations or warranties as tothe accuracy or completeness of information included herein and shall haveno liability for the consequences of use of such information.

Draft — The document is a draft version only. The content is still underinternal review and subject to formal approval, which may result inmodifications or additions. Nexperia does not give anyrepresentations or warranties as to the accuracy or completeness ofinformation included herein and shall have no liability for the consequencesof use of such information.

Short data sheet — A short data sheet is an extract from a full data sheetwith the same product type number(s) and title. A short data sheet isintended for quick reference only and should not be relied upon to containdetailed and full information. For detailed and full information see therelevant full data sheet, which is available on request via the local Nexperiasales office. In case of any inconsistency or conflict with theshort data sheet, the full data sheet shall prevail.

Product specification — The information and data provided in a Productdata sheet shall define the specification of the product as agreed betweenNexperia and its customer, unless Nexperia andcustomer have explicitly agreed otherwise in writing. In no event however,shall an agreement be valid in which the Nexperia productis deemed to offer functions and qualities beyond those described in theProduct data sheet.

DisclaimersLimited warranty and liability — Information in this document is believedto be accurate and reliable. However, Nexperia does not giveany representations or warranties, expressed or implied, as to the accuracyor completeness of such information and shall have no liability for theconsequences of use of such information. Nexperia takes noresponsibility for the content in this document if provided by an informationsource outside of Nexperia.

In no event shall Nexperia be liable for any indirect, incidental,punitive, special or consequential damages (including - without limitation -lost profits, lost savings, business interruption, costs related to the removalor replacement of any products or rework charges) whether or not suchdamages are based on tort (including negligence), warranty, breach ofcontract or any other legal theory.

Notwithstanding any damages that customer might incur for any reasonwhatsoever, Nexperia’s aggregate and cumulative liability towardscustomer for the products described herein shall be limited in accordancewith the Terms and conditions of commercial sale of Nexperia.

Right to make changes — Nexperia reserves the right tomake changes to information published in this document, including withoutlimitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof.

Suitability for use in automotive applications — This Nexperiaproduct has been qualified for use in automotiveapplications. Unless otherwise agreed in writing, the product is not designed,authorized or warranted to be suitable for use in life support, life-critical orsafety-critical systems or equipment, nor in applications where failure ormalfunction of a Nexperia product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. Nexperia and its suppliers accept no liability forinclusion and/or use of Nexperia products in such equipment orapplications and therefore such inclusion and/or use is at the customer's ownrisk.

Quick reference data — The Quick reference data is an extract of theproduct data given in the Limiting values and Characteristics sections of thisdocument, and as such is not complete, exhaustive or legally binding.

Applications — Applications that are described herein for any of theseproducts are for illustrative purposes only. Nexperia makesno representation or warranty that such applications will be suitable for thespecified use without further testing or modification.

Customers are responsible for the design and operation of theirapplications and products using Nexperia products, and Nexperiaaccepts no liability for any assistance with applications orcustomer product design. It is customer’s sole responsibility to determinewhether the Nexperia product is suitable and fit for thecustomer’s applications and products planned, as well as for the plannedapplication and use of customer’s third party customer(s). Customers shouldprovide appropriate design and operating safeguards to minimize the risksassociated with their applications and products.

Nexperia does not accept any liability related to any default,damage, costs or problem which is based on any weakness or defaultin the customer’s applications or products, or the application or use bycustomer’s third party customer(s). Customer is responsible for doing allnecessary testing for the customer’s applications and products using Nexperiaproducts in order to avoid a default of the applicationsand the products or of the application or use by customer’s third partycustomer(s). Nexperia does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined inthe Absolute Maximum Ratings System of IEC 60134) will cause permanentdamage to the device. Limiting values are stress ratings only and (proper)operation of the device at these or any other conditions above thosegiven in the Recommended operating conditions section (if present) or theCharacteristics sections of this document is not warranted. Constant orrepeated exposure to limiting values will permanently and irreversibly affectthe quality and reliability of the device.

Terms and conditions of commercial sale — Nexperiaproducts are sold subject to the general terms and conditions of commercialsale, as published at http://www.nexperia.com/profile/terms, unless otherwiseagreed in a valid written individual agreement. In case an individualagreement is concluded only the terms and conditions of the respectiveagreement shall apply. Nexperia hereby expressly objects toapplying the customer’s general terms and conditions with regard to thepurchase of Nexperia products by customer.

No offer to sell or license — Nothing in this document may be interpretedor construed as an offer to sell products that is open for acceptance or thegrant, conveyance or implication of any license under any copyrights, patentsor other industrial or intellectual property rights.

Export control — This document as well as the item(s) described hereinmay be subject to export control regulations. Export might require a priorauthorization from competent authorities.

Translations — A non-English (translated) version of a document is forreference only. The English version shall prevail in case of any discrepancybetween the translated and English versions.

http://www.nexperia.com/profile/terms





TrademarksNotice: All referenced brands, product names, service names andtrademarks are the property of their respective owners.





16. Contents

1. General description......................................................12. Features and benefits.................................................. 13. Applications.................................................................. 14. Quick reference data....................................................15. Pinning information......................................................26. Ordering information....................................................27. Marking..........................................................................28. Limiting values............................................................. 39. Thermal characteristics............................................... 410. Characteristics............................................................511. Test information......................................................... 612. Package outline (minimized)..................................... 713. Soldering..................................................................... 814. Revision history..........................................................915. Legal information..................................................... 10

© Nexperia B.V. 2017. All rights reservedFor more information, please visit: http://www.nexperia.comFor sales office addresses, please send an email to: [email protected] Date of release: 03 May 2016

BAS116QA - Nexperia

Documents

Transcript of BAS116QA - Nexperia