CLEARENTER PMUNITS = METERS `BY SPECIFYING UNIT M IS ALSO ACCEPTABLETITLE = BARGE-210 Feet (64.008M)COMMENT (1) THE BARGE WAS BUILT BASE ON GENERAL ARRANGEMENT DWG-DATECREATED MAY 2008.COMMENT (2) ORIGIN OF BARGE AT FRAME 0.COMMENT (3) SHELL THICKNESS NOT INCLUDED.ORIGIN(L) = FRAME 0ORIGIN(T) = CENTERPLANEORIGIN(V) = BASELINE`CREATE THE HULL OF BARGE (210 Feet) BY PART MAKER (PM)`====================================================CREATE HULL\HULL.CCLASS HULL `DEFAULT CLASS IS TANK, IF OMITTED, UNLESS THE PART NAME IS`HULLDESCRIPTION HULLSPACING = 1.8288LOCUS @ 0 = 0, 2.439, 9.144, 2.439, 9.144, 3.658, 0, 3.658 `FRAME 0LOCUS @ -7.3152 = 0, 0, 9.144, 0, 9.144, 3.658, 0, 3.658 `FRAME 4LOCUS @ -54.864 = 0, 0, 9.144, 0, 9.144, 3.658, 0, 3.658 `FRAME 30LOCUS @ -64.008 = 0, 2.744, 9.144, 2.744, 9.144, 3.658, 0, 3.658 `FRAME 35MARGIN 0.076`CAMBER (REGULAR) 0.5 `IF OMITTED REGULAR IS ASSUMED, TYPE OF CAMBER =`REGULAR, CIRCULAR, PARABOLIC AND STRAIGHT c1 [@ l1, c2`@ l2, ... cn @ ln]`SHELL 0.012 `CAN BE ALSO DEFINE AS SB, SS, ST = BOTTOM, SIDE, TOP/`CREATE TANKS FOR BARGE BY APPENDAGE MAKER (AM) & TANK MAKER (TM)`=========================================================================CREATE VOID1.S `IF COMPONENT IS OMITTED, COMPONENT NAME IS SAME AS`PART NAMECLASS TANK `DEFAULT CLASS IS TANK, IF OMITTED, UNLESS THE PART`NAME IS HULLSIDE S `DEFAULT SIDE IMPLIED BY COMPONENT NAME OR PART`NAME`DEFAULT SIDE FOR COMPONENT, IF OMITTED, STARBOARD`FOR CONTAINERS (TANK AND COMPARTMENT)`CENTERLINE FOR DISPLACERSDESCRIPTION NO.1 VOID.SCONTENTS = SWPERMEABILITY 0.985 `DEFAULT IS 0.985 (1.0 FOR DISPLACER), IF PERMEABILITY IS`OMITTEDENDS -64.008, -60.350 `FRAME 35 - 33INBOARD 0.000 `DEFAULT IS ZERO, IF INBOARD IS OMITTEDOUTBOARD 9.144TOP 3.658BOTTOM 0.00 `DEFAULT IS NEGATIVE INFINITY, IF BOTTOM IS OMITTEDFIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958 `FIRST POINT MARKS THE BOTTOM OF SOUNDING`LINE; LAST POINT MARKS AT THE TOP/CREATE VOID1.POPPOSITE VOID1.SDESCRIPTION NO.1 VOID.P/CREATE VOID2.S\VOID2.SDESCRIPTION NO.2 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -60.350, -54.864 `FRAME 33 - 30INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID2.POPPOSITE VOID2.SDESCRIPTION NO.2 VOID.P/CREATE VOID3.S\VOID3.SDESCRIPTION NO.3 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -54.864, -45.720 `FRAME 30 - 25INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID3.POPPOSITE VOID3.SDESCRIPTION NO.3 VOID.P/CREATE VOID4.S\VOID4.SDESCRIPTION NO.4 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -45.720, -36.576 `FRAME 25 - 20INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID4.POPPOSITE VOID4.SDESCRIPTION NO.4 VOID.S/CREATE VOID5.S\VOID5.SDESCRIPTION NO.5 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -36.576, -27.432 `FRAME 20 - 15INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID5.POPPOSITE VOID5.SDESCRIPTION NO.5 VOID.S/CREATE VOID6.S\VOID6.SDESCRIPTION NO.6 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -27.432, -18.288 `FRAME 15 - 10INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID6.POPPOSITE VOID6.SDESCRIPTION NO.6 VOID.S/CREATE VOID7.S\VOID7.SDESCRIPTION NO.7 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -18.288, -9.144 `FRAME 10 - 5INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID7.POPPOSITE VOID7.SDESCRIPTION NO.7 VOID.P/CREATE VOID8.S\VOID8.SDESCRIPTION NO.8 VOID.SCONTENTS = SWPERMEABILITY 0.985ENDS -9.144, 0 `FRAME 5 - 0INBOARD 0.000OUTBOARD 9.144TOP 3.658BOTTOM 0.00FIT HULL`TUBE = -61, 9, 2.544, -61, 9, 3.958/CREATE VOID8.POPPOSITE VOID8.SDESCRIPTION NO.8 VOID.P/`CREATE SKEG FOR BARGE BY APPENDAGE MAKER (AM) & TANK MAKER (TM)`========================================================================CREATE HULL\SKEGCLASS HULL `IF PART IS DEFINED AS SKEG, CLASS = APPENDAGEDESCRIPTION SKEGSPACING 1.8288LOCUS @ -6.274 = 7.144, 0.256, 7.344, 0.256, 7.344, 3.658, 7.144, 3.658, 7.144, 0.256LOCUS @ -5.486 = 7.144, 0.000, 7.344, 0.000, 7.344, 3.658, 7.144, 3.658, 7.144, 0.000`FRAME 3LOCUS @ -0.330 = 7.144, 0.000, 7.344, 0.000, 7.344, 3.658, 7.144, 3.658, 7.144, 0.000`AFTER FRAME 0FIT HULL/`CREATE SIDE WALL FOR BARGE BY APPENDAGE MAKER (AM) & TANK MAKER `(TM)`=========================================================================CREATE WALL\AWALL.CCLASS SAIL `CLASS STATEMENT MUST DEFINE IMMEDIATELY AFTER`CREATE COMMAND LINE`CLASS = {HULL, TANK, SAIL, APPENDAGE,`SUPERSTRUCTURE}DESCRIPTION SIDE WALLSPACING 1.8288ENDS -1.829, -1.800 `FRAME 1INBOARD 0.000OUTBOARD 7.544TOP 5.487BOTTOM 3.658FIT HULLSPACING 1.8288COMPONENT SWALL.CENDS -1.829, -62.179 `FRAME 1 - 34INBOARD 7.514OUTBOARD 7.544TOP 5.487BOTTOM 3.658FIT HULL/DISPLAYWAITWRITE D21.GF, MINQUIT