8/18/2019 asascopp

1/1

transport format has a control branch gain offset of 11/15 and a data branch gain

offset of 15/15. This indicates that the overhead generated by the control branch decreases as the bitrate of the data branch increases. The log file also specifies the power offset to be applied between theacknowledged PRACH preamble and the control part of the PRACH message. This power offset can be configured to have any integer value between _ 5 and 10dB. In this example, both transportformats have a power offset of 2 dB. Table 3.24 presents a set of example transmit powers for thegain offsets specified in Log File 3.9 assuming that the acknowledged PRACH preamble had a

transmit power of 5 dBm. These figures illustrate that the transport format with the higher bit ratemakes use of a higher total transmit power although the transmit power allocated to the control branch remains constant. RACHTFI 0TFI 1CCCH, DCCHDTCHRACHTFI 0TFI 1CCCH, DCCHDTCHRACHTFI 0TFI 1Transport Format

Combination 2(CTCF = 1)