ANNUAL INSPECTION

Inflatable lifejackets require inspection regardless of whether they have been inflated or not. Failure to carry out the annual inspection may cause your inflatable lifejacket to malfunction! The annual inspection is best carried out by our accredited service stations, or as an alternative you can perform a simplified inspection yourself. Instructions for this simplified self inspection and information of our accredited service stations are to be found on our web page: www.baltic.se

HOW THEY OPERATE

Inflatable lifejackets have an inflation valve either automatic or manual connected to an airtight bladder. To operate the manual valve you simply pull the toggle on the right hand side of the jacket downwards with a jerk and the bladder will start to inflate immediately. The automatic lifejacket will operate and inflate once it has been immersed in water for three seconds. The automatic can be operated manually and both types can be inflated orally by the tube. The oral tube is used to deflate the lifejacket. N.B! After gas inflation the lifejacket must be rearmed. Inside the lifejacket you will find instructions as to which rearming kit to use. Instructions to complete the rearming procedure are included with our rearming kits.

RETAINER

All Baltic lifejackets are fitted with a cylinder retainer to prevent the cylinder from working loose.

FUNCTION

INFLATION

Reflective patches

Light/AIS holder

Inflation/deflation tube

Cylinder retainer

Light (optional)

Inflation mechanism

Light/AIS holder

Inspection history

Pull cord

Lifting becket

Part no for rearming kit

AUTOMATIC VALVEIf either one or both indicators on the automatic valve shows red the lifejacket must be inspected or rearmed. All inflatable lifejackets in Baltics industrial range are equipped with an inspection window for valve control.

CARTRIDGE / CAPSULECheck the expiry date of cartridge / capsule.

CHECK PULL KNOBCheck that the manual inflation pull knob is accessible when donned.

PRE-WEAR CHECK

INFLATABLE LIFEJACKETS RACINGLifejackets in this category are designed for active sailing and especially to be comfortable to wear for long periods. All lifejackets in Racing category are available with integrated spray hood and lifejacket light to comply with the current international yacht racing regulations.

LEGEND 190 WITH HARNESS

Legend 190 auto harness black, Part Number: 1970

Legend 190 SLA auto harnessblack, Part Number: 1975

Legend 190 auto harness red, Part Number: 1971

Legend 190 SLA auto harnessred, Part Number: 1976

Legend 165 auto harness black, Part Number: 1785

Legend 165 auto harness SLA black, Part Number: 1795

Legend 165 auto harness red, Part Number: 1786

Legend 165 auto harness SLA red, Part Number: 1796

A newly developed model with extra buoyancy and excellent fit. With an airy mesh lining next to the body as well as detachable crutch strap. Legend 190 is further out on the shoulders and beyond the neck than many other models. The integrated safety harness has a woven attachment loop to secure the lifeline. Buoyancy 190N.

Model SLA is equipped with integrated spray hood, emergency light and mount for AIS and is therefore approved for World Sailing OSR.

The Inspection window is fitted so that you can visually check the two indicators of the automatic valve are showing green and that the lifejacket is ready for use. Five years guarantee.

Size: 40 -120 kg

LEGEND 165 WITH HARNESSThe Legend Baltic’s best-selling lifejacket with safety harness has an airy mesh lining next to the body as well as a detachable crutch strap. The Legend 165 is wider at the shoulder straps and sits further back away from the neck compared to other lifejacket models. The integrated safety harness has a woven loop to secure the lifeline. Buoyancy 165N. The Inspection window is fitted so that you can visually check the two indicators of the automatic valve are showing green and that the lifejacket is ready for use.

Model SLA is equipped with spray hood, emergency light and mount for AIS and is therefore approved for World Sailing OSR. Five years guarantee.

Size: 40 -120 kg

**LEGENDThe Legend one of Baltic’s best-selling lifejackets has an airy mesh lining next to the body as well as a detachable crutch strap. The Legend 165 has a wider neck opening and sits further back away from the neck compared to other lifejacket models. Buoyancy 165N. The inspection window is fitted so that you can visually check the two indicators of the automatic valve are showing green and that the lifejacket is ready for use.Five years guarantee.

Size: 40 -120 kg

Also available in: Legend auto red, Part Number: 1746Legend auto white, Part Number: 1748

Lengend auto royal, Part Number: 1747

Legend auto black, Part Number: 1745

**WINNER 165

INFLATABLE LIFEJACKETS VERSATILEBaltic’s versatile lifejackets can be used in almost all circumstances, all models are equipped with a fleece collar, detachable crutch strap, on most models you have the option of either the quick release buckle or integrated safety harness.

This lifejacket is based on Baltic’s well-known original model Winner. Strong outer fabric with detachable crutch strap. Also available with integrated safety harness. Buoyancy 165N. Five years guarantee.

Size: 40-150 kg

Winner 165 auto harness black/grey, Part Number: 1830

Winner 165 man harness black/grey, Part Number: 18 0

Winner 165 auto black/grey, Part Number: 1850

\Winner 165 man black/grey, Part Number: 1840

Winner 165 auto black/orange, Part Number: 1851

Winner 165 man black/orange, Part Number: 1841

Winner 165 auto harness black/orange, Part Number: 1831

Winner 165 man harness black/orange, Part Number: 18 1

**WINNERBaltic’s top selling model of lifejacket. Strong outer fabric and fitted with an detachable crutch strap. Also available with integrated safety harness. Buoyancy 165N. Five years guarantee.

Size: 40-150 kg

Winner auto harness black, Part Number: 1635

Winner man harness black, Part Number: 1525

Winner auto black, Part Number: 1555

Winner man black, Part Number: 1545

Winner auto red, Part Number: 1595

Winner man red, Part Number: 1585

Winner auto harness red, Part Number: 1575

Winner man harness red, Part Number: 1565

LIFEJACKETS

Bambi is designed for new born babies up to the weight of 12 kg. The Bambi quickly turns the child into a safe back position. Extra soft material throughout the vest. Fleece-lined neck. Fitted with whistle, retro-reflective patches, two position crutch strap and lifting handle on top of the collar. Buoyancy 38N. Five years guarantee.

Size: toddler 3-12 kg.

BAMBI

Bambi supersoft UV yellow, Part Number: 1253

Bambi supersoft orange, Part Number: 1252

Bambi supersoft pink, Part Number: 1264

INFLATABLE LIFEJACKET/BUOYANCY AID iFLOATThe iFloat is Baltic’s latest development designed to give maximum freedom and comfort. The inflatable lung is stowed in a pocket that can be sited anywhere around the waist. To deploy should you require buoyancy, simply pull the iFloat out of the pocket place over your head and inflate by pulling the inflation cord. Only suitable for swimmers.

50N BUOYANCY

iFloat 50 man navy, Part Number: 5697

A lifejacket is designed to aid the wearer to turn onto the safe back position and support the head so that the airways are above the water. This therefore makes it the obvious choice for all non-swimmers. All Baltic lifejacket models for new-born up to and including 15/20 kg are fitted with a wider crutch strap that can be clicked into two length positions to ensure a perfect fit. These lifejackets have segmented front panels so that they contour to the body and give freedom of movement. A lifejacket has more buoyancy on the front and less on the back, this ensures the lifejacket turns the wearer into the safe back position. The collar of the vest has nothing to do with the actual turning but helps to support the head so that the airways are above the water. All of the Baltic lifejackets are equipped with crutch strap, retro-reflective patches and a whistle.There is also a model with integrated safety harness for the little ones, these harnesses are tested and approved according to EN ISO 12401 and have stainless steel D-rings for attaching a safety line.

OCEAN HARNESSA lifejacket for children and juniors with integrated CE approved safety harness with a stainless steel D-ring front and back for lifeline attachment. Size 3-15 kg has only D-ring at the back. Fitted with whistle, retro-reflective patches and crutch strap. Grab handles behind the collar on the smaller sizes. Five years guarantee.

Sizes: Toddler 3-15 kg, Part Number: 1299-000-1Child 15-30 kg, Part Number: 1299-000-2Junior 30-40 kg, Part Number: 1299-000-3

Ocean Harness UV yellow, Part Number: 1299

Print, Part Number: 1255

Pirate, Part Number: 1285

**PRO SAILORExcellent fit due to the smaller tolerance size range. The two smallest sizes have a beaver tail crutch strap with twin fastening points. Fitted with retro-reflective patches, whistle and a grab handle under the collar on the three smallest sizes. Five years guarantee.

Sizes: Toddler 10-20 kg, Part Number: 1284-000-2Child 15-30 kg, Part Number: 1284-000-3 Junior 30-40 kg, Part Number: 1284-000-4Junior 40-50 kg, Part Number: 1284-000-5M 50-70 kg, Part Number: 1284-000-6L 70-100 kg, Part Number: 1284-000-7

PRINTSame version as Split Front but with a printed fabric of whales and octopuses. Five years guarantee.

Sizes: Toddler 3-10 kg, Part Number: 1255-000-1Child 10-20 kg, Part Number: 1255-000-2

PIRATESame as Pro Sailor but with a printed fabric with pirate motif. Five years guarantee.

Sizes: Toddler 3-15 kg, Part Number: 1285-000-1Child 15-30 kg, Part Number: 1285-000-2

Pro Sailor orange, Part Number: 1284

SPECIALIST BUOYANCY AIDS

Dinghy Pro red/black, Part Number: 5702

Comfortable buoyancy aid with elasticated shoulders straps and a generous sized head opening for easy donning. Chest pocket. Five years guarantee.

Sizes:

S 30-50 kg, Part Number: XXXX-000-1M 50-70 kg, Part Number: XXXX-000-2L 70+ kg Part Number: XXXX-000-3

Paddler UV yellow/black, Part Number: 5613

Paddler red/navy, Part Number: 5614

CANOEClassic robustly made and designed paddler buoyancy aid. Especially suitable for hire use. Net pocket on the chest. Crutch strap. Reinforcement tape over the shoulders. Buoyancy 60N. Five years guarantee.

Size: One size 40-130 kg.

Canoe UV yellow/navy, Part Number: 5518

Canoe red/navy, Part Number: 5517

In this category you will find buoyancy aids that are specifically designed for particular activities and sports on or in the water. There are models for kayaking, fishing, sailing, canoeing and of course dinghy sailing. All of Baltic’s buoyancy aids are tested and approved to the latest standards. Functional buoyancy aids are approved to 50N standard, this means that a buoyancy aid will keep you afloat with a good margin of safety but will not turn you on to the safe back position or support your head. Therefore 50N products are only suitable for swimmers and for persons over 25 kg. If you weigh less than 25 kg or are not able to swim you should use a lifejacket.

**DINGHY PROSpecial dinghy racing buoyancy aid. Used by a numerous national teams in World Cup Optimist racing. Zipped front pocket. Extra soft foam makes it the dinghy sailors favourite buoyancy aid. Waistband has Velcro adjustment Over the head with side entry. Optional crutch strap can be fitted to the two smallest sizes. Five years guarantee.

Sizes: XS 25-40 kg, Part Number: XXXX-003-1S 40-50 kg, Part Number: XXXX-003-2M 50-70 kg, Part Number: XXXX-003-3M/L 70-80 kg, Part Number: XXXX-003-4L 80-90 kg, Part Number: XXXX-003-5XL 90+ kg, Part Number: XXXX-003-6

LITE

The ultimate dingy racing buoyancy aid, developed from the very popular Dinghy Pro. An over the head model without bulky zips or buckles. Adjustable shoulder straps gives the best possible fiton this vest where comfort and user experience is key. Zipped pocket and detachable crutch strap. Five year guarantee.

Sizes S 25-40 kg, Part Number -000-1

S 40-50 kg, Part Number -000-2M 50-70 kg, Part Number -000-3L 80- 0 kg, Part Number -000-4

L 0 kg, Part Number -000-5

Elite Black57

CANOE HYDROBack pack designed to hold a hydration bottle. D-rings on the shoulders to retain the hydration tube and to attach hat, sunglasses etc. Deep pocket on the chest. Crutch strap. Other design features the same as the Canoe. Five years guarantee.

Size: One size 40-130 kg.

Canoe Hydro orange/navy, Part Number: 5600

ALL PURPOSE BUOYANCY AIDS

**AQUA PRO

Aqua Pro red, Part Number: 5319

An all-round buoyancy aid designed to suit general boating activities on or near water. When selecting an all-purpose vest the two most important parameters are fit and design, it should fit comfortably to suit your specific needs.All-round buoyancy aids are approved to the 50N standard, this means that a buoyancy aid will keep you afloat with a good margin of safety but will not turn you on to the safe back position or support your head. Therefore the 50N products are only suitable for swimmers and for persons over 25 kg. If you weigh less than 25 kg or are not able to swim you should use a lifejacket.

**TRIMHaving the floatation material in multiple panels provides the Trim with a high degree of comfort and fit. Front zip fastening with waistband and bottom tie. Five years guarantee.

Sizes:

S 30-50 kg, Part Number: 5840-000-1 M 50-70 kg, Part Number: 5840-000-2 L 70-90 kg, Part Number: 5840-000-3 XL 90+ kg, Part Number: 5840-000-4

Trim grey/black, Part Number: 5840

ADVENTUREPerfect buoyancy aid for fishing and wildlife exploration. Three zipped pockets. Two large mesh pockets on the back. Multi point attachment fitting and retro-reflective patches on the shoulders. Two years guarantee.

Sizes:S 30-50 kg, Part Number: 5350-000-1M 40-50 kg, Part Number: 5350-000-2L 70-90 kg, Part Number: 5350-000-3XL 90+ kg, Part Number: 5350 -000-4

Adventure black, Part Number: 5350

An entry level general purpose buoyancy aid. Neck tie, waistband and bottom tie. Five years guarantee.

Sizes:

S 30-50 kg, Part Number: 5319-003-1M 50-70 kg, Part Number: 5319-003-2L 70-90 kg, Part Number: 5319-003-3XL 90+ kg, Part Number: 5319-000-4

PET BUOYANCY AIDS

PLUTOPluto is Baltic’s entry level dog buoyancy aid, with a lifting handle and retro-reflective patches at the back. With webbing under straps with fasteners. D-ring for leash attachment.

Sizes: XS 0-3 kg, Part Number: 0410-000-0 S 3-8 kg, Part Number: 0410-000-1 M 8-15 kg, Part Number: 0410-000-2 L 15-40 kg, Part Number: 0410-000-3 XL 40+ kg, Part Number: 0410-000-4 XXL 40 ++ kg, Part Number: 0410-000-5

Pluto orange, Part Number: 0410

SAFETY HARNESSES AND SAFETY LINES

All of Baltic’s safety lines and harnesses are approved in accordance with EN/ISO 12401 and comply to the regulations of World Sailing OSR. The harnesses webbings are made from UV-stabilized polyester. The safety lines are manufacture from polyamide webbing. The fittings are made of non-magnetic stainless steel. Five years guarantee.

Safety harness Adult 50+ kg, Part Number: 0104

2-hook safety line length 1 m,Part Number: 0108

Jackstay, Part Number: 0101

2-hook safety line length 2 m,Part Number: 0115

3-hook safety line length 2 m,Part Number: 0120

2-hook safety line elasticated, extendedlength 2 m, Part Number: 0107

3-hook safety line elasticated, extendedlength 2 m, Part Number: 0106

Supreme 1-hook elasticated safety line with loop, length 2m

1 1

Supreme 3-hook elasticated safety line, length 2m1

2-hook elasticated safety line with looplength 2m. 11

LIFEBUOYS AND M.O.B. SYSTEMS Baltic have different models of lifebuoys for different purposes. Swedebuoy and Rescue Sling are stored to be released into the water and trawled around the distressed person who grabs the floating line. The crew can then pull the distressed to the boat and use the Swedebuoy/Rescue Sling to help them back on board. The horseshoe combination is for use in calmer environments, for example, in cases of overboard near land or in port.

Horseshoe buoy yellow, Part Number: 8562 Horseshoe buoy red, Part Number: 8563

BALTIC LIFESAVERThe Baltic Lifesaver is an automati-cally inflatable horseshoe buoy. The compact design and easy deployment makes it suitable for many applications afloat and ashore.

Baltic Lifesaver, Part Number: 8565

SWEDEBUOY

Swedebuoy man overboard recovery system yellow, Part Number: 9590

HORSESHOE

BALTIC RESCUE SLING

Baltic Rescue sling navy, Part Number: 9605

2021INDUSTRIAL WORKBOOK

INDUSTRIAL &OFFSHORE RANGE

INDUSTRIAL

**AMAROK FLOATATION SUITThe floatation suit has a new much lighter and softer floatation material. Remains soft and comfortable to wear in very low temperatures. 100% waterproof due to waterproof materials and taped seams. Fitted with exterior pockets, an inside pocket, a high collar and a hood that can be rolled into the collar. Internal braces for optimum fit and adjustable cuffs in the sleeves and legs. Approved to EN ISO 12402-6 and EN ISO 15027-1 thermal protection.

Sizes: XS 50-60 kg, Part Number: 5792-000-1S 60-70 kg, Part Number: 5792-000-2M 70-80 kg, Part Number: 5792-000-3L 80-90 kg, Part Number: 5792-000-4XL 90-100 kg, Part Number: 5792-000-5XXL 100+ kg, Part Number: 5792-000-6

Amarok red/black, Part Number: 5792

EGEND 1 5

The series of Baltic SOLAS life jacket for work with comfort available with fabric or wipe clean PVC cover.The design features larger neck opening soft collar, Baltic unique head support and tailored to ensure a close fit with minimal bulk. Standard features include quick lock buckle, crutch straps, lifting becket and buddyline. Optional extras are lifejacket light, sprayhood, protective covers, AIS and PLB. Products with integrated safety harnesses are approved to EN ISO 12401 and has a non-magnetic stainless steel interlocking front buckle.

S 50-60 kg, 1S 60-70 kg, M 70-80 kg, L 80- 0 kg, 4

L 0-100 kg, 5L 100 kg,

Also available inLegend Black, 18 / W/Harness, 181Legend Red, 18 / W/Harness, 181

Legend - Blue, 18 4W/Harness, 1814

18 11811

HYBRID ILOT

The Hybrid 220 Pilot is a lifejacket which has 55N inherent buoyant material and a 165N inflatable lung. The Hybrid comes with automatic inflation or manual only inflation. Two zipped pockets, retro reflective patches, double crutch straps and a window for an identity card on the left chest.

S 50-60 kg, Part Number -000-1

S 60-70 kg, Part Number -000-2M 70-80 kg, Part Number -000-3L 80- 0 kg, Part Number -000-4

L 0-100 kg, Part Number -000-5L 100 kg, Part Number -000-6

Hybrid 220 Pilot Auto, 17Hybrid 220 Pilot Manual, 17

Hybrid 220 Pilot Auto, 17 1Hybrid 220 Pilot Manual, 17 1

ISO 9001 Certi ied manufacturer of M.E.D./SOLAS

approved products

TESTED AND�APPROVED TO M.E.D./SOLAS�MSC 200 (80)

BALTIC INDUSTRIAL - Available on Request **Contact sales@marineplus.com.au for more information.

WIND MILL 305 M.E.D./SOLAS

The Baltic Wind Mill SOLAS lifejacket is designed for the commercial environment allowing the wearer to work in comfort. The design features larger neck opening and soft collar. The EN ISO 12401 safety harness is desig-ned to fit a fall arrest harness. Non-magnetic stainless steel interlocking front buckle. Detachable twin crutch straps. Buddy line. Zipped radio pocket. 2 card holders. Attachment points for light, AIS and spray hood. Lifting becket, whistle. Reflective patches on the cover. Buoyancy: 305N. Optional extras are safety light, spray hood, protective covers.

Wind Mill Auto, Part Number: 2816Size: 43+ kg

FIRE

Emergency services lifejacket with an attachment D-ring at the back. Available in manual or automatic and fitted with reflective tape, whistle, lifting becket and crutch straps. Toggle to fit a sprayhood. Buoyancy 305N.

POLICE

Emergency services lifejacket with an attachment D-ring at the back. Automatic and fitted with reflective tape, whistle, lifting becket and crutch straps. Toggle to fit a sprayhood. Buoyancy 305N.

Police Auto, Part Number: 2712Size: 40-150kg

Fire Auto, Part Number: 2711Size: 40-150kg

BALTIC WORKER

Worker is a robust buoyancy aid in our industrial program. The outer cover is manufactured using a PVC coated nylon which makes the vest resistant to UV-light, oil and mould. The Worker has three sturdy waistbands to ensure a comfortable fit, lifting handles in the shoulder straps and retro- reflective patches on the shoulders. One size fits from 40 -130 kg.

Baltic Worker, Part Number: 5112One Size: 40-130kg

BALTIC DOCK FLOATATION JACKET

The classic Dock an EN ISO approved floatation jacket has received a face lift with higher quality materials and a significantly better fit. The Dock was originally designed to be used exclusively in ports and on board vessels in commercial service. Since then it has quickly became a favourite on board pleasure boats because of its practicality. Waterproof, warm and lots of pockets, not forgetting the high visibility properties. New floatation material, new smoother exterior material and new features such as air vents under the arms, new softer and better reflective strips and a significantly better fit makes this the obvious choice of flotation jacket for both industry and the safety-conscious leisure boat owner.

Baltic Dock Flotation Jacket, Part Number: 5470Sizes: XS-XXXL

ACCESSORIES/ SPARE PARTS

Crutch Strap kit 30 mm, Part Number: 2510

Whistle, Part Number: 2508

33 g cylinder with safety indicators, Part Number: 2433

38 g cylinder with safety indicators, Part Number: 2438

Safety indicators Suitable for all Baltic inflatable models, Part Number: 2404

Sprayhood, Part Number: 2516

MOLTEN METAL SPLASH PROOF COVERNew design for better fit. Fits all Baltic inflatbale lifejackets. The flame resistant material is soft, pliable and does not reflact light from welding or cutting tools.

PROTECTIVE COVER

New design for better fit. Fits all Baltic inflatable lifejackets. Durable material protects your lifejacket from wear, oils and sparks from the cutting tool.

Protective Cover, Part Number: 2521Molten Metal Splash Proof Cover, Part Number: 2543