IP66 IK08 - Leading Manufacturer of LED Lighting, Outdoor ...
AAA-LUX WS-Series Gen6 IP65 IK08 - Abacus Lighting · 2020. 11. 9. · AAA-LUX WS-Series Gen6 IP65...
Transcript of AAA-LUX WS-Series Gen6 IP65 IK08 - Abacus Lighting · 2020. 11. 9. · AAA-LUX WS-Series Gen6 IP65...
AAA-LUX
The AAA-LUX WS-series family of floodlights are a true retrofit for existing 2 kW Metal Halide (2.2 kW power dissipation) floodlights. The white light produced by the luminaire gives a daylight perception, which enhances play at all levels.
The Lighting Control Management System (LCMS) can wirelessly switch and dim the luminaires via the proprietary LEDxLINK protocol. In the absence of a LCMS, the luminaires switch on at full power.
Equipped with high-quality LED lamps and optics, the light beams are configured to enable sports fields to be illuminated to the levels dictated by the relevant sports governing bodies. The high-quality optics illuminate the sports fields with excellent uniformity whilst producing minimal stray light.
The integrated electronic power supply has a high efficiency (greater than 95%), and a power factor (PF) above 0.95. With zero inrush current, the electrical installation can be designed at nominal current, saving significant cabling costs in the case of a new build installation.
Boasting a long lifetime and high reliability, all materials used are suitable for outdoor use even in harsh conditions (high temperature versions are available).
Benefits• Lightest weight on the market at 22kg• 5 Year (20,000 hours) warranty as standard for LED and driver
Hardened Glass:
• Scratch resistant• Long life• Easy maintenance• Clear
Class A LED's driven at max. 60%:
• Long life• Efficiency > 160lm/W
AAA-LUX Optics:
• Maximum efficiency• High uniformity
Construction:
• Stainless steel fastenings
• Anti-corrosion double coated aluminimum body
Driver Features:
• Class A capacitors with long lifetime• IP65/66 glands oriented downwards• High efficiency >95%• Automatic temperature protection. Protects against over / under
voltage. Surge protection 6,000v• High power factor >0.9 from 20-100%• No in-rush current
- No voltage peak- Reduces total power requirement- Reduced costs
Colour: Dark grey powder coated RAL7015 / Pantone 446C
Gen6 v Gen5 - Improvements at a glance:
• Market leading weight (22-23kg)- Cost savings by mounting on smaller masts / foundations
• Low profile design results in lower windage• Can be retrofitted on a wider range of masts• Rigid construction increases stability• Simplified aiming with integral aiming system• Modules are locked in position preventing accidental
misalignment during handling• Redesigned heat sink greatly improves heat dissipation• Communicates with 3rd party controllers via API
WS-Series Gen6IP65IK08
DocID: datasheet-AAA-LUX-Gen6-20180521www.abacuslighting.com
AAA-LUXWS-Series Gen6IP65IK08
AAA-LUX BV | CONFIDENTIAL 11
CB2.0 - Control Box 2
Detailed Energy Usage System Health Check
40m standard100m possible
Smart phone / tablet
3rd party controller API
Touch screen network computer
Diagnostics with four levels
Control boxSwitch box
in / out
Stand aloneSwitch boxTIF in / out
AAA-LUX light management system
The system can be remotely monitored from a central location via computer. Wireless push button boxes or proximity sensors at entry gates can send information to the control box to activate the lights or alternatively smart devices can be used to give the same control. These signals are fed into the system and will activate the desired pre-programmed lighting scenes. In case of emergency, all lights can be switched to maximum at the central console. The facility manager can analyse the energy consumption of the system, and optimize between lighting level and energy costs. With a remote access module, an installer can access the system and inspect the luminaires and light management system. Based on luminaire data, maintenance can be scheduled.
Lighting control & WS-Series
When different zones of a site require full lighting levels and others need to be dimmed at different times through the dark hours, the dimmed zones can be brought back up to full lighting levels instantly for emergencies or to allow maximum dimming duration between working time of the zones. This saves energy, keeps running costs low and increases the level of site security.
Energy saving - Total-cost-of-ownership
• Dimmed to the right level• Switched on when needed• Short ROI
DocID: datasheet-AAA-LUX-Gen6-20180521www.abacuslighting.com
AAA-LUXWS-Series Gen6IP65IK08
Technical data
Minimum Typical Maximum Unit
Voltage input 370 400 * 430 VAC
Power factor at 20%-100% 0.90 0.98
Frequency 45 60 Hz
Standby power 5 W
Colour temperature 5,200 K
Colour rendering index 70 80
Weight 22 kg
Ingress protection IP65
Electrical insulation class I
Frontal surface WS100/150 (tilt) 0.16 (0°) Cw = 1 m²
Frontal surface WS200 (tilt) 0.25 (15°) Cw = 1 m²
Frontal surface WS220/230 (tilt) 0.22 (15°) Cw = 1 m²
Frontal surface WS250 (tilt) 0.23 (15°) Cw = 1 m²
Frontal surface WS300 (tilt) ** 0.29 (15°) Cw = 1 0.33 (30°) Cw = 1 m²
Expected lifetime 35,000 60,000 hrs
Power consumption at 100%Standard
Maximum Power (MP)High Temperature (HT)
1,5501,7001,375
1,6001,7501,425
WWW
CurrentStandard
Maximum Power (MP)High Temperature (HT)
@ 400VAC 3.9 4.33.5
@ 370VAC4.34.83.9
AAA
Ambient operating temperature *** -20 +50 °C
Luminous flux LEDs LM80Standard
Maximum Power (MP)High Temperature (HT)
@ 80%168,930183,690154,170
@ 100%202,870220,590184,420
lmlmlm
Luminous efficacy luminaire LM79Standard
Maximum Power (MP)High Temperature (HT)
@ 100%98.493.5103.6
@ 80%108.9103.6114.8
159.9159.9159.9
lm/Wlm/Wlm/W
* 230VAC also available upon request ** Windage on WS300 at 30° tilt is worst case *** Absolute maximum temperature 60°C; auto dimming may occur at high temperatures, see below paragraph
The AAA-LUX Gen.6 is tested according to ANSI/UL1598 ISTM (In Situ Temperature Measurement. The built-in temperature protection dims the luminaire automatically, based on the ambient temperature. The graph below shows the maximum luminous output for the different products per ambient temperature and wind still weather conditions. When the product is already dimmed with the LCMS control system, the temperature protection dims only when this dim level is lower than the set dim level.
STD AL/HT
120%
100%
80%
60%
40%
20%
0%-20 -10 0 10 20 30 40 50
Ambient Temperature vs Luminous Flux
DocID: datasheet-AAA-LUX-Gen6-20180521www.abacuslighting.com
AAA-LUXWS-Series Gen6IP65IK08
Definitions
Accessories
Luminaire technical information and dimming-power
Delivered lumen output and power consumption
Standard:STD luminaires are designed for an average ambient temperature of 30°C. The STD can handle high temperatures up to 40°C although it is recommended to switch to the HT version when, during normal operating hours, the ambient temperature is regularly above 30°C in combination with still winds.
Maximum power:Product is optimised for maximum luminous flux (lm) instead of optimal efficacy (lm/W) and cannot be combined with High Temperature option.
High temperature:Product is designed for high temperature environments and cannot be combined with Maximum Power option.
Lifetime:Can only be assured when the system prohibits the luminaires working during daytime (not designed to operate in full sun load)• All sensitive bolts, nuts, washers and mounting clips are
made of Stainless Steel• Light sources are made of corrosion resistant aluminum
with low copper content
Light spill shield:These shields can be used to further reduce light pollution. They can be placed on the individual light beams of the LED luminaire
Aiming visor:A tool for the installation of the LED luminaire
The Gen6 products are available with various beams to accommodate different areas, mast heights and sports fields. For better light spill control, luminaires can be equipped with light spill caps.
Luminaire Type
Standard Maximum Power High Temperature
WS1005 152,615 159,729 142,472
WS1505 152,615 159,729 142,472
WS2005 160,665 168,589 149,774
WS2205 159,515 167,323 148,731
WS2305 159,515 167,323 148,731
WS2505 160,665 168,589 149,774
WS3005 159,515 167,323 148,731
WS4005 73,308 79,865 71,236
WS6005 152,615 159,729 142,472
Luminous flux in lm per lamp type based on DEKRA LM-79 measurement
Intensity (rel. %)
0.90
0.95
1.00
0.85
0.80
0.75
0.70
0.65
0.60
0.55
0.500% 20% 40% 60% 80% 100%
Intensity (rel. %)
1200
1400
1600
1000
800
600
400
200
00% 20% 40% 60% 80% 100%
Intensity vs Power Power Factor vs Dimming
DocID: datasheet-AAA-LUX-Gen6-20180521www.abacuslighting.com
AAA-LUXWS-Series Gen6IP65IK08
Dimensions (mm)
Polar intensity diagrams
310
840 660
ø22
175
Maximum fixture dimensions including mounting bracket: 840 x 660 x 310
WS100Lamp: 8 LED Modules
15º 0º 15º
105º
90º
75º
60º
45º
30º
800
1000
600
400
105º
90º
75º
60º
45º
30º
cd/klmC0 - C180C90 - C270
WS150Lamp: 8 LED Modules
15º 0º 15º
105º
90º
75º
60º
45º
30º
800
1000
600
1200
1400
400
105º
90º
75º
60º
45º
30º
cd/klmC0 - C180C90 - C270
WS200Lamp: 8 LED Modules
15º 0º 15º
105º
90º
75º
60º
45º
30º
800
1200
1600
105º
90º
75º
60º
45º
30º
cd/klmC0 - C180C90 - C270
WS250Lamp: 8 LED Modules
15º 0º 15º
105º
90º
75º
60º
45º
30º
800
1000
600
400
105º
90º
75º
60º
45º
30º
cd/klmC0 - C180C90 - C270
WS301Lamp: 8 LED Modules
15º 0º 15º
105º
90º
75º
60º
45º
30º
1200
1600
105º
90º
75º
60º
45º
30º
cd/klmC0 - C180C90 - C270
WS400Lamp: 4 LED Modules
15º 0º 15º
105º
90º
75º
60º
45º
30º
800
1000
600
400
105º
90º
75º
60º
45º
30º
cd/klmC0 - C180C90 - C270
DocID: datasheet-AAA-LUX-Gen6-20180521www.abacuslighting.com