IP66 IK08 - Leading Manufacturer of LED Lighting, Outdoor ...

LSI Industries Inc. 10000 Alliance Rd. Cincinnati, OH 45242 • www.lsicorp.com(513) 372-3200 • ©2020 LSI Industries Inc. All Rights Reserved. Specifications subject to change without notice.

/9 Rev. 12/14/21 SPEC.1045.A.0620

Catalog #: Project:

Date: Type:Prepared By:

Mirada Medium (MRM)Outdoor LED Area Light

FEATURES & SPECIFICATIONS

Construction

• Rugged die-cast aluminum housing contains factory prewired driver and optical unit. Cast aluminum wiring access door located underneath.

• Designed to mount to square or round poles.

• Fixtures are finished with LSI’s DuraGrip® polyester powder coat finishing process. The DuraGrip finish withstands extreme weather changes without cracking or peeling. Other standard LSI finishes available. Consult factory.

• Shipping weight: 37 lbs in carton.

Optical System

• State-of-the-Art one piece silicone optic sheet delivers industry leading optical control with an integrated gasket to provide IP66 rated sealed optical chamber in 1 component.

• Proprietary silicone refractor optics provide exceptional coverage and uniformity in IES Types 2, 3, 5W, FT, FTA and AM.

• Silicone optical material does not yellow or crack with age and provides a typical light transmittance of 93%.

• Zero uplight.• Available in 5000K, 4000K, and 3000K

color temperatures per ANSI C78.377. Also Available in Phosphor Converted Amber with Peak intensity at 610nm.

• Minimum CRI of 70.• Integral louver (IL) and house-side shield

(IH) options available for improved backlight control without sacrificing street side performance. See page 3 for more details.

Electrical

• High-performance programmable driver features over-voltage, under-voltage, short-circuit and over temperature protection. Custom lumen and wattage packages available.

• 0-10V dimming (10% - 100%) standard.• Standard Universal Voltage (120-277 Vac)

Input 50/60 Hz or optional High Voltage (347-480 Vac).

• L80 Calculated Life: >100k Hours (See Lumen Maintenance on Page 5)

• Total harmonic distortion: <20%• Operating temperature: -40°C to +50°C

(-40°F to +122°F). 42L and 48L lumen packages rated to +40ºC.

• Power factor: >.90• Input power stays constant over life.• Field replaceable 10kV surge protection

device meets a minimum Category C Low operation (per ANSI/IEEE C62.41.2).

• High-efficacy LEDs mounted to metal-core circuit board to maximize heat dissipation

• Components are fully encased in potting material for moisture resistance. Driver complies with FCC standards. Driver and key electronic components can easily be accessed.

Controls • Optional integral passive infrared

Bluetooth™ motion and photocell sensor (see page 9 for more details). Fixtures operate independently and can be commissioned via iOS or Android configuration app

• LSI’s AirLink™ wireless control system options reduce energy and maintenance costs while optimizing light quality 24/7. (see page 9 for more details).

Installation

• Designed to mount to square or round poles.

• A single fastener secures the hinged door, underneath the housing and provides quick & easy access to the electrical compartment.

• Included terminal block accepts up to 12 ga. wire.

• Utilizes LSI’s traditional 3” drill pattern B3 for easy fastening of LSI products. (See drawing on page 9)

Warranty

• LSI LED Fixtures carry a 5-year warranty.

Listings

• Listed to UL 1598 and UL 8750.• Meets Buy American Act requirements.• IDA compliant; with 3000K color

temperature selection.• Title 24 Compliant; see local ordinance for

qualification information.• Suitable for wet Locations.• IP66 rated Luminaire per IEC 60598.• 3G rated for ANSI C136.31 high vibration

applications are qualified.• DesignLights Consortium® (DLC) qualified

product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are qualified.

• Patented Silicone Optics (US Patent NO. 10,816,165 B2)

• IK08 rated luminiare per IEC 66262 mechanical impact code

Specifications and dimensions subject to change without notice.

OVERVIEW

Lumen Package 7,000 - 48,000

Wattage Range 48 - 401

Efficacy Range (LPW) 117 - 160

Weight lbs(kg) 30 (13.6)

QUICK LINKS

Ordering Guide Performance Photometrics Dimensions

IP66 IK08


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightORDERING GUIDE Back to Quick Links

LuminairePrefix

Light Source

Lumen Package

LightOutput Distribution Orientation2 Voltage Driver

MRM - Mirada LED 7L - 7,000 lms9L - 9,000 lms12L - 12,000 lms18L - 18,000 lms24L - 24,000 lms30L - 30,000 lms36L - 36,000 lms42L - 42,000 lms48L - 48,000 lmsCustom Lumen Packages1

SIL - Silicone 2 - Type 2

3 - Type 3

5W - Type 5 Wide

FT - Forward Throw

FTA - Forward Throw Automotive

AM - Automotive Merchandise

(blank) - standard

L- Optics rotated left 90°

R - Optics rotated right 90°

UNV - Universal Voltage (120-277V)

HV - High Voltage (347-480V)

DIM - 0-10V Dimming (0-10%)

TYPICAL ORDER EXAMPLE: MRM LED 36L SIL FTA UNV DIM 50 70CRI ALSCS04 BRZ IL

Color Temp Color Rendering Finish Options

50 - 5,000 CCT

40 - 4,000 CCT

30 - 3,000 CCT

AMB - Phosphor Converted Amber12

70CRI - 70 CRI BLK - BlackBRZ - Dark BronzeGMG - Gun Metal GrayGPT - GraphiteMSV - Metallic SilverPLP - Platinum PlusSVG - Satin Verde GreenWHT - White

(Blank) - None

IH - Integral Houseside Shield2

IL - Integral Louver (Sharp Spill Light Cutoff)2

Controls (Choose One)

(Blank) - None

Wireless Controls System ALSC - AirLink Synapse Control SystemALSCH - AirLink Synapse Control System Host / Satelite 3

ALSCS02 - AirLink Synapse Control System with 12-20’ Motion SensorALSCHS02 - AirLink Synapse Control System Host / Satelite with 12-20’ Motion Sensor 3ALSCS04 - AirLink Synapse Control System with 20-40’ Motion Sensor ALSCHS04 - AirLink Synapse Control System Host / Satelite with 20-40’ Motion Sensor 3 ALBCS1 - AirLink Blue Wireless Motion & Photo Sensor Controller (8-24’ mounting height)ALBCS2 - AirLink Blue Wireless Motion & Photo Sensor Controller (25-40’ mounting height)

Stand-Alone ControlsEXT - 0-10v Dimming leads extended to housing exteriorCR7P - 7 Pin Control Receptacle ANSI C136.41 6IMSBT1- Integral Bluetooth™ Motion and Photocell Sensor (8-24’ MH)5

IMSBT2- Integral Bluetooth™ Motion and Photocell Sensor (25-40’ MH)5

Button Type PhotocellsPCI120 - 120VPCI208-277 - 208 -277VPCI347 - 347V

Lutron Limelight ControlsLLC – LimeLight Integral Wireless Radio Control by Lutron4

LLCS1 – Limelight Integral Wireless Radio Control and PIR Motion/ Daylight Sensor by Lutron 8-15’ mt height4

LLCS2 – Limelight Integral Wireless Radio Control and PIR Motion/Daylight Sensor by Lutron 16-30’ mt height4

LLCS3 – Limelight Integral Wireless Radio Control and PIR Motion/Daylight Sensor by Lutron 31-40’ mt height4

Accessory Ordering Information7

FOOTNOTES:1. Custom lumen and wattage packages available, consult factory. Values are within industry

standard tolerances but not DLC listed.2. Not available with 5W distribution3. Consult Factory for availability.4. Not available in HV.5. IMSBT is field configurable via the LSI app that can be downloaded from your smartphone’s

native app store.6. Control device or shorting cap must be ordered separately. See Accessory Ordering

Information.

7. Accessories are shipped separately and field installed.8. Factory installed CR7P option required. See Options. 9. “CLR” denotes finish. See Finish options. 10. Only available with ALSC/ALSCH control options.11. Fusing must be located in hand hole of pole. See Fusing Accessory Guide for compatability. 12. Only available in 9L and 12L Lumen Packages. Consult factory for lead time and availability.

Mounting Accessories9

Description Order Number10

Universal Mounting Bracket 684616CLR

Adjustable Slip Fitter (2" - 2 3/8" Tenon) 688138CLR

Horizontal Slip Fitter (2" - 2 3/8" Tenon) 652761CLR

Quick Mount Pole Bracket (Square Pole) 687073CLR

Quick Mount Pole Bracket (4-5" Round Pole) 689903CLR

15 Tilt Quick Mount Pole Bracket (Square Pole) 688003CLR

15 Tilt Quick Mount Pole Bracket (4-5" Round Pole) 689905CLR

Wall Mount Bracket 382132CLR

Wood Pole Bracket (6” Minimum Pole Diameter) 751219CLR

Controls Accessories

Description Order Numberr10

PC120 Photocell for use with CR7P option (120V)8 122514

PC208-277 Photocell for use with CR7P option (208V, 240V, 277V)8 122515

Twist Lock Photocell (347V) for use with CR7P 8 122516

Twist Lock Photocell (480V) for use with CR7P 8 1225180

AirLink 5 Pin Twist Lock Controller 8 661409

AirLink 7 Pin Twist Lock Controller 8 661410

PMOS24-24V Pole-Mounted Occupancy Sensor (24V) 663284CLR

Shorting Cap for use with CR7P 149328

Fusing Options11

Description Order Number

Single Fusing (120V)

See Fusing Accessory Guide

Single Fusing (277V)

Double Fusing (208V, 240V)

Double Fusing (480V)

Double Fusing (347V)

Miscellaneous Accessories

Description Order Number

Integral Louver/Shield 690981

Integral House Side Shield 743415

10’ Linear Bird Spike Kit (3’ Recommended per Luminaire) 751632

Shielding Options

Mirada Small

See Shielding Guide

Mirada Medium

Mirada Large

Zone Medium

Zone Large

Slice Medium

https://www.lsicorp.com/wp-content/uploads/fusing-accessories-guide.pdf



https://www.lsicorp.com/wp-content/uploads/documents/products/shielding-guide.pdf

https://www.lsicorp.com/wp-content/uploads/documents/products/shielding-guide.pdf


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area Light

Optics Rotated Left Straight Optics Rotated Right

Use TypeR

(Optics Rotated Right)

Pole

EXAMPLE Use TypeL

(Optics Rotated Left)

OPTICS ROTATION ACCESSORIES/OPTIONS

Integral Louver (IL) and House-Side Shield (IH)Accessory louver and shield available for improved backlight control without sacrificing street side performance. LSI’s Integral Louver (L) and Integral House-Side Shield (IH) options deliver backlight control that significantly reduces spill light behind the poles for applications with pole locations close to adjacent properties. The design maximizes forward reflected light while reducing glare, maintaining the optical distribution selected, and most importantly eliminating light trespass. Both options rotate with the optical distribution.

7 Pin Photoelectric Control7-pin ANSI C136.41-2013 control receptacle option available for twist lock photocontrols or wireless control modules. Control accessories sold separately. Dimming leads from the receptacle will be connected to the driver dimming leads (Consult factory for alternate wiring).

Luminaire Shown with PCR 7P

Luminaire Shown with IMSBT & IL/IH Options

Top View

IMSBT

IH/IL


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightPERFORMANCE Back to Quick Links

Delivered Lumens*

Lumen Package Distribution CRI

3000K CCT 4000K CCT 5000K CCT

WattageDelivered Lumens

Efficacy BUG Rating

Delivered Lumens

Efficacy BUG Rating

Delivered Lumens

Efficacy BUG Rating

7L

2

70

7560 157 B2-U0-G2 7560 157 B2-U0-G2 7560 157 B2-U0-G2

48

3 7616 159 B1-U0-G2 7616 159 B1-U0-G2 7616 159 B1-U0-G2

5W 7292 152 B3-U0-G1 7292 152 B3-U0-G1 7292 152 B3-U0-G1

FT 7562 158 B2-U0-G2 7562 158 B2-U0-G2 7562 158 B2-U0-G2

FTA 7595 158 B2-U0-G2 7595 158 B2-U0-G2 7595 158 B2-U0-G2

AM 7687 160 B1-U0-G1 7687 160 B1-U0-G1 7687 160 B1-U0-G1

9L

2

70

9853 159 B2-U0-G2 9853 159 B2-U0-G2 9853 159 B2-U0-G2

62

3 9926 160 B2-U0-G2 9926 160 B2-U0-G2 9926 160 B2-U0-G2

5W 9504 153 B3-U0-G2 9504 153 B3-U0-G2 9504 153 B3-U0-G2

FT 9856 159 B2-U0-G3 9856 159 B2-U0-G3 9856 159 B2-U0-G3

FTA 9900 160 B2-U0-G2 9900 160 B2-U0-G2 9900 160 B2-U0-G2

AM 10019 162 B2-U0-G1 10019 162 B2-U0-G1 10019 162 B2-U0-G1

12L

2

70

13135 155 B3-U0-G2 13135 155 B3-U0-G2 13135 155 B3-U0-G2

85

3 13232 156 B2-U0-G2 13232 156 B2-U0-G2 13232 156 B2-U0-G2

5W 12669 149 B4-U0-G2 12669 149 B4-U0-G2 12669 149 B4-U0-G2

FT 13138 155 B2-U0-G3 13138 155 B2-U0-G3 13138 155 B2-U0-G3

FTA 13196 155 B2-U0-G2 13196 155 B2-U0-G2 13196 155 B2-U0-G2

AM 13355 157 B2-U0-G2 13355 157 B2-U0-G2 13355 157 B2-U0-G2

18L

2

70

19318 143 B3-U0-G3 19318 143 B3-U0-G3 19318 143 B3-U0-G3

135

3 19461 144 B3-U0-G3 19461 144 B3-U0-G3 19461 144 B3-U0-G3

5W 18633 138 B4-U0-G2 18633 138 B4-U0-G2 18633 138 B4-U0-G2

FT 19324 143 B3-U0-G3 19324 143 B3-U0-G3 19324 143 B3-U0-G3

FTA 19408 144 B3-U0-G3 19408 144 B3-U0-G3 19408 144 B3-U0-G3

AM 19641 145 B3-U0-G2 19641 145 B3-U0-G2 19641 145 B3-U0-G2

24L

2

70

25957 147 B4-U0-G3 25957 147 B4-U0-G3 25957 147 B4-U0-G3

176

3 26149 149 B3-U0-G4 26149 149 B3-U0-G4 26149 149 B3-U0-G4

5W 25037 142 B5-U0-G3 25037 142 B5-U0-G3 25037 142 B5-U0-G3

FT 25964 148 B3-U0-G4 25964 148 B3-U0-G4 25964 148 B3-U0-G4

FTA 26077 148 B3-U0-G3 26077 148 B3-U0-G3 26077 148 B3-U0-G3

AM 26393 150 B3-U0-G2 26393 150 B3-U0-G2 26393 150 B3-U0-G2

30L

2

70

32417 140 B4-U0-G3 32417 140 B4-U0-G3 32417 140 B4-U0-G3

232

3 32656 141 B3-U0-G4 32656 141 B3-U0-G4 32656 141 B3-U0-G4

5W 31267 135 B5-U0-G3 31267 135 B5-U0-G3 31267 135 B5-U0-G3

FT 32424 140 B3-U0-G4 32424 140 B3-U0-G4 32424 140 B3-U0-G4

FTA 32566 140 B4-U0-G3 32566 140 B4-U0-G3 32566 140 B4-U0-G3

AM 32960 142 B3-U0-G3 32960 142 B3-U0-G3 32960 142 B3-U0-G3

36L

2

70

38275 133 B4-U0-G4 38275 133 B4-U0-G4 38275 133 B4-U0-G4

288

3 38557 134 B4-U0-G5 38557 134 B4-U0-G5 38557 134 B4-U0-G5

5W 36917 128 B5-U0-G4 36917 128 B5-U0-G4 36917 128 B5-U0-G4

FT 38283 133 B4-U0-G5 38283 133 B4-U0-G5 38283 133 B4-U0-G5

FTA 38450 134 B4-U0-G4 38450 134 B4-U0-G4 38450 134 B4-U0-G4

AM 38916 135 B3-U0-G3 38916 135 B3-U0-G3 38916 135 B3-U0-G3


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightPERFORMANCE (CONT.)

ELECTRICAL DATA (AMPS)*

Lumens 120V 208V 240V 277V 347V 480V

7L 0.40 0.23 0.20 0.17 0.14 0.10

9L 0.52 0.30 0.26 0.22 0.18 0.13

12L 0.71 0.41 0.35 0.31 0.24 0.18

18L 1.13 0.65 0.56 0.49 0.39 0.28

24L 1.47 0.85 0.73 0.64 0.51 0.37

30L 1.93 1.12 0.97 0.84 0.67 0.48

36L 2.40 1.38 1.20 1.04 0.83 0.60

42L 2.95 1.70 1.48 1.28 1.02 0.74

48L 3.4A 1.9A 1.7A 1.5A 1.2A 0.8A

ELECTRICAL DATA - PHOSPHOR CONVERTED AMBER (AMPS)*

Lumens Watts 120V 208V 240V 277V 347V 480V

9L 74.3 0.6A 0.4A 0.3A 0.3A 0.2A 0.2A

12L 102.9 0.9A 0.5A 0.4A 0.4A 0.3A 0.2A

RECOMMENDED LUMEN MAINTENANCE1 (7-18L)

Ambient Intial2 25h2 50hr2 75hr2 100hr2

0-50 C 100% 96% 92% 88% 84%

RECOMMENDED LUMEN MAINTENANCE1 (24-48L)

Ambient Intial2 25h2 50hr2 75hr2 100hr2

0-40 C 100% 100% 97% 94% 92%

DELIVERED LUMENS*

Lumen Package Distribution

Phosphor Converted Amber (Peak 610mm)Wattage

Delivered Lumens Efficacy BUG Rating

9L

2 5848 80 B2-U0-G2

74

2 - IL 3644 50 B0-U0-G1

3 6018 82 B1-U0-G2

3 - IL 4468 61 B0-U0-G2

5W 5471 74 B3-U0-G1

FT 5801 79 B1-U0-G2

FT - IL 3649 50 B0-U0-G1

FTA 5924 81 B1-U0-G1

FTA - IL 4243 58 B1-U0-G1

12L

2 7530 74 B2-U0-G2

102

2 - IL 4692 46 B0-U0-G1

3 7749 76 B1-U0-G2

3 - IL 5753 57 B0-U0-G2

5W 7045 69 B3-U0-G2

FT 7470 73 B2-U0-G2

FT - IL 4699 46 B0-UO-G2

FTA 7628 75 B2-U0-G2

FTA-IL 5464 54 B1-U0-G1

1. Lumen maintenance values at 25C are calculated per TM-21 based on LM-80 data and in-situ testing.

2. In accordance with IESNA TM-21-11, Projected Values represent interpolated value based on time durations that are within six times the IESNA LM-80-08 total test duration for the device under testing.

3. In accordance with IESNA TM-21-11, Calculated Values represent time durations that exceed

six times the IESNA LM-80-08 total test duration for the device under testing.

*Electrical data at 25°C (77°F). Actual wattage may differ by +/-10%

*LEDs are frequently updated therefore values are nominal.

Delivered Lumens*

Lumen Package Distribution CRI

3000K CCT 4000K CCT 5000K CCT

WattageDelivered Lumens

Efficacy BUG Rating

Delivered Lumens

Efficacy BUG Rating

Delivered Lumens

Efficacy BUG Rating

42L

2

70

44118 125 B5-U0-G4 44118 125 B5-U0-G4 44118 125 B5-U0-G4

354

3 44444 126 B4-U0-G5 44444 126 B4-U0-G5 44444 126 B4-U0-G5

5W 42555 120 B5-U0-G4 42555 120 B5-U0-G4 42555 120 B5-U0-G4

FT 44130 125 B4-U0-G5 44130 125 B4-U0-G5 44130 125 B4-U0-G5

FTA 44322 125 B4-U0-G4 44322 125 B4-U0-G4 44322 125 B4-U0-G4

AM 44859 127 B4-U0-G3 44859 127 B4-U0-G3 44859 127 B4-U0-G3

48L

2

70

48795 122 B5-U0-G4 48795 122 B5-U0-G4 48795 122 B5-U0-G4

401

3 49156 123 B4-U0-G5 49156 123 B4-U0-G5 49156 123 B4-U0-G5

5W 47066 117 B5-U0-G4 47066 117 B5-U0-G4 47066 117 B5-U0-G4

FT 48809 122 B4-U0-G5 48809 122 B4-U0-G5 48809 122 B4-U0-G5

FTA 49021 122 B5-U0-G4 49021 122 B5-U0-G4 49021 122 B5-U0-G4

AM 49615 124 B4-U0-G3 49615 124 B4-U0-G3 49615 124 B4-U0-G3


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightBack to Quick Links

Luminaire photometry has been conducted by a NVLAP accredited testing laboratory in accordance with IESNA LM-79-08. As specified by IESNA LM-79-08 the entire luminaire is tested as the source resulting in a luminaire efficiency of 100%.

See https://www.lsicorp.com/product/mirada-medium/ for detailed photometric data.

LUMINAIRE DATA

Type 2 Distribution

Description 4000 Kelvin, 70 CRI

Delivered Lumens 32,416

Watts 232

Efficacy 140

IES Type Type II - Short

BUG Rating B4-U0-G3

LUMINAIRE DATA

Type 3 Distribution



Watts 232

Efficacy 141

IES Type Type III - Short

BUG Rating B3-U0-G4

Zonal Lumen Summary

Zone Lumens %Luminaire

Low (0-30)° 4796 15%

Medium (30-60)° 19811 61%

High (60-80)° 7474 23%

Very High (80-90)° 335 1%

Uplight (90-180)° 0 0%

Total Flux 32416 100%

Zonal Lumen Summary


Low (0-30)° 3385 10%

Medium (30-60)° 16250 50%

High (60-80)° 12430 38%

Very High (80-90)° 591 2%

Uplight (90-180)° 0 0%


MRM-LED-30L-SIL-2-40-70CRI

MRM-LED-30L-SIL-3-40-70CRI

ISO FOOTCANDLE

ISO FOOTCANDLE

POLAR CURVE

POLAR CURVE

.5

12

5

6310

12620

18929

25239

1

2

25’ Mounting Height/ 25’ Grid Spacing 5 FC 2 FC 1 FC 0.5 FC

PHOTOMETRICS

.51

2

5

2

5470

10941

16411

21881

1


LUMINAIRE DATA

Type FT Distribution



Watts 232

Efficacy 140

IES Type Type IV - Short

BUG Rating B3-U0-G4

Zonal Lumen Summary


Low (0-30)° 3952 12%

Medium (30-60)° 15505 48%

High (60-80)° 12279 38%

Very High (80-90)° 688 2%

Uplight (90-180)° 0 0%


MRM-LED-30L-SIL-FT-40-70CRIISO FOOTCANDLE POLAR CURVE

.5

1

2

54752

9503

14255

19006

1

2

20’ Mounting Height/15’ Grid Spacing 20 FC 10 FC 5 FC 2 FC


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightPHOTOMETRICS (CONT)

LUMINAIRE DATA

Type FTA Distribution



Watts 232

Efficacy 140

IES Type Type VS - Short

BUG Rating B4-U0-G3

LUMINAIRE DATA

Type AM Distribution



Watts 232

Efficacy 142

IES Type Type III - Very Short

BUG Rating B3-U0-G3

LUMINAIRE DATA

Type 5W Distribution



Watts 232

Efficacy 135

IES Type Type VS - Short

BUG Rating B5-U0-G3

Zonal Lumen Summary


Low (0-30)° 6986 21%

Medium (30-60)° 19172 59%

High (60-80)° 5875 18%

Very High (80-90)° 534 2%

Uplight (90-180)° 0 0%


Zonal Lumen Summary


Low (0-30)° 6363 9%

Medium (30-60)° 22026 43%

High (60-80)° 4192 48%

Very High (80-90)° 379 1%

Uplight (90-180)° 0 0%


Zonal Lumen Summary


Low (0-30)° 3138 10%

Medium (30-60)° 13193 42%

High (60-80)° 14641 47%

Very High (80-90)° 296 1%

Uplight (90-180)° 0 0%


MRM-LED-30L-SIL-FTA-40-70CRI

MRM-LED-30L-SIL-AM-40-70CRI

MRM-LED-30L-SIL-5W-40-70CRI

ISO FOOTCANDLE

ISO FOOTCANDLE

ISO FOOTCANDLE

POLAR CURVE

POLAR CURVE

POLAR CURVE

.5

12 5

4127

8253

12380

16506

1

2


.51

2

5

26544

6636

13272

19908

1

2


.51

2

5

1

3777

7554

11330

15107

2



/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightPRODUCT DIMENSIONS Back to Quick Links

CONTROLS

AirLink Wireless Lighting Controller The AirLink integrated controller is a California Title 24 compliant lighting controller that provides real-time light monitoring and control with utility-grade power monitoring. It includes a 24V sensor input and power supply to connect a sensor into the outdoor AirLink wireless lighting system. The wireless integrated controller is compatible with this fixture.

Click the link below to learn more details about AirLink.

https://www.lsicorp.com/wp-content/uploads/documents/products/airlink-outdoor-specsheet.pdf

Integral Bluetooth™ Motion and Photocell Sensor (IMSBT)Slim low profile sensor provides multi-level control based on motion and/or daylight. Sensor controls 0-10 VDC LED drivers and is rated for cold and wet locations (-30° C to 70° C). Two unique PIR lenses are available and used based on fixture mounting height. All control parameters are adjustable via an iOS or Android App capable of storing and transmitting sensor profiles.

Click the link below to learn more details about IMSBT.

https://www.lsicorp.com/wp-content/uploads/documents/products/imsbt-specsheet.pdf

AirLink BlueWireless Bluetooth Mesh Outdoor Lighting Control System that provides energy savings, code compliance and enhancedsafety/security for parking lots and parking garages. Three key components; Bluetooth wireless radio/sensor controller,Time Keeper and an iOS App. Capable of grouping multiple fixtures and sensors as well as scheduling time-based events by zone. Radio/Sensor Controller is factory integrated into Area/Site, Wall Mounted, Parking Garage and Canopy luminaires.

Click the link below to learn more details about AirLink Blue.

https://www.lsicorp.com/product/airlink-blue/

7.6"(192mm)

13-1/2"(342mm)

7.8"(198mm)

6.5"(165mm)

31.3"(795mm)

IMSBT Motion &Photocell Sensor

Bottom ViewTop View

Photo ControlReceptacle

B3 Pole Drill Pattern

ø0.875ø0.563

2.422

1.211

LUMINAIRE EPA CHART - MRM

Single

D180°

D90°

0.5

1.0

0.8

1.5

1.5

1.9

1.9

1.9

2.3

1.0

1.0

1.0

2.5

3.3

2.5

2.8

3.9

2.8

T90°

TN120°

Q90°

0º 30º 45ºTilt Degree 0º 30º 45ºTilt Degree


/9 Rev. 12/14/21 SPEC.1045.A.0620

Type:

Mirada Medium Outdoor LED Area LightPOLES & BRACKETS

LSI offers a full line of poles and mounting accessories to complete your lighting assembly. Aluminum and steel in both square and round shafts. In addition, LSI offers round tapered, fluted and hinge based poles. Designed and engineered for durability and protected with our oven baked DuraGrip Protection System. Also available with our DuraGrip+ Protection system for unmatched corrosion resistance and an extended warranty. American made in our Ohio facility with industry leading lead times.

Click the link below to learn more details about poles & brackets.

https://www.lsicorp.com/products/poles-brackets/

SquarePole

14'-39'

RoundPole

10'-30'

TaperedPole

20'-39'

BKA UMB CLR

The 3G rated UMB allows for seamless integration of LSI luminaires onto existing/ retrofit or new construction poles. The UMB was designed for square or round (tapered or straight) poles with two mounting hole spacings between 3.5” – 5”.

BKA ASF CLR

The adjustable Slip Fitter is a 3G rated rugged die cast aluminum adapter to mount LSI luminaires onto a onto a 2” iron pipe , 2 3/8 OD tenon. The Adjustable Slip Fitter can be rotated 180° allowing for tilting LSI luminaires up to 45° and 90° when using a vertical tenon.

BKS PQMH CLR

The Pole Quick Mount Bracket allows for lightning fast installation of LSI luminaires onto existing and new construction poles with LSI’s B3 or B5 standard pole bolt patterns.

BKS PQM15 CLR

The Pole Quick Mount Bracket allows for preset 15° uptilt of LSI luminaires for greater throw of light and increased vertical illumination as well as fast installation onto poles with LSI’s 3” or 5” bolt pattern.

BKA UMB CLR

BKA ASF CLR

BKS PQMH CLR

BKS PQM15 CLR

Square

Pole14'-39'

RoundPole

10'-30'

TaperedPole

20'-39'

LSI o�ers a full line of poles and mounting accessories to complete your lighting assembly. Aluminum and steel in both square and round shafts. In addition, LSI o�ers round tapered, fluted and hinge based poles. Designed and engineered for durability and protected with our oven baked DuraGrip Protection System. Also available with our DuraGrip+ Protection system for unmatched corrosion resistance and an extended warranty. American made in our Ohio facility with industry leading lead times.

The adjustable Slip Fitter is a 3G rated rugged die cast aluminum adapter to mount LSI luminaires onto a onto a 2” iron pipe , 2 3/8 OD tenon. The Adjustable Slip Fitter can be rotated 180° allowing for tilting LSI luminaires up to 45° and 90° when using a vertical tenon.

The 3G rated UMB allows for seamless integration of LSI luminaires onto existing/ retrofit or new construction poles. The UMB was designed for square or round (tapered or straight) poles with two mounting hole spacings between 3.5” – 5”.

The Pole Quick Mount Bracket allows for preset 15° uptilt of LSI luminaires for greater throw of light and increased vertical illumination as well as fast installation onto poles with LSI's 3" or 5" bolt pattern.

The Pole Quick Mount Bracket allows for lightning fast installation of LSI luminaires onto existing and new construction poles with LSI's B3 or B5 standard pole bolt patterns.

IP66 IK08 - Leading Manufacturer of LED Lighting, Outdoor ...

Documents

Transcript of IP66 IK08 - Leading Manufacturer of LED Lighting, Outdoor ...