7/30/2019 96682353

1/12

SIMPLY CLEVER

kodaOctavia

CAR RADIO MELODY - CD

7/30/2019 96682353

2/12

7/30/2019 96682353

3/12

Contents 1

Contents

Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Radio - Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Important information . . . . . . . . . . . . . . . . . . . . . . . .

Anti-theft protection . . . . . . . . . . . . . . . . . . . . . . . . . .

Basic setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Radio mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

22

3

3

5

7

7

7/30/2019 96682353

4/12

7/30/2019 96682353

5/12

Radio 3

WARNING

Please always pay full attention to the traffic situation around you! As thedriver you are fully responsible for the traffic safety. Only use the functions

in such a way that you always maintain the control over your vehicle in alltraffic situations!

Using the display

Carefully handle the display because dents and scratches can occur through pres-sure of the finger or contact with sharp objects.

The display can be cleaned with a soft cloth and finger marks can be wiped awaywith pure alcohol.

Note

Do not use solvent such as turpentine or petrol as they will corrode the displaysurface.

Anti-theft protection

Anti-theft coding

Your radio is equipped with a convenience coding. If the radio is being operated forthe first time, the safety code is not only stored in the radio but also in the vehicle.

After disconnecting and reconnecting the battery, first of all switch on the ignitionand then the radio.

If you wish to install the radio in another vehicle, the safety code must be entered.In this case, please do not hesitate to contact a koda Service Partner or a kodaimporter.

As the unit only functions after entering the safety code, this practically excludes itsuse after a theft - a contribution to increased anti-theft safety.

Note

The code is stored in the instrument cluster. Through this it is automaticallydecoded (convenience coding). A manual entry of the code is normally notnecessary.

Enter code

Switch on the radio if the ignition is on. SAFE is displayed and then1000.

Enter the safety code using the station keys - .

Confirm the safety code by pressing the station key .

If you have confirmed a wrongly entered code, you can repeat once again the entireprocess.

If the code number is entered incorrectly for the second time, the unit will beblocked for approx. one hour. It is only possible to repeat the entry of the safetycode after an hour has expired and while the unit is switched on and the ignitionkey remains in the ignition lock.

The cycle - two attempts, blocked for an hour - furthermore applies.

Basic setting

Switching the unit on and off

The system is switched on or off by pressing the rotary/push knob .

If the key is pulled out of the ignition lock when the system is switched on, thesystem switches off automatically. You can switch on again the unit by pressing therotary/push knob . If the engine is switched off, the unit (protection of the vehiclebattery before discharging) switches off automatically after approx. one hour.

1 4

6

A1

A1

7/30/2019 96682353

6/12

Radio4

If you have switched off the radio by withdrawing the ignition key, the radioswitches on again once the ignition is on.

Audio settings

Setting treble

Press the button , TRE appears in the display.

Set the desired value by turning the button .

Setting the bass

Once again press the button , BASS appears in the display.

Set the desired value by turning the button .

By pressing again the button or 5 seconds after the setting, the set values arestored and the radio returns to the normal mode.

Adjusting volume ratio

Balance

Press the button , BAL appears in the display.

You can set with the button the desired value of the volume ratiobetween the left and right side.

Fader

Press the button repetitively, FAD appears in the display.

You can set with the button the desired value of the volume ratiobetween the front and the rear.

By pressing again the button or 5 seconds after the setting, the set values arestored and the radio returns to the normal mode.

Setting the special functions

Press the button for some considerable time, in order to activatethe menu Setup.

Once again press the button or the rocker switch or , inorder to select the individual functions of the menu.

Confirm the changed setting with the button .

By pressing the button for some considerable time or 30 secondsafter the setting, the set values are automatically stored and the unitreturns to the normal mode.

GALA

Your radio increases automatically its volume with the increasing vehicle speed. Ahigher setting value results in a stronger volume increase.

ON VOL

Your radio stores the last volume set before switching off. If the value is higher, thevolume is reduced to the value of the parameter ON VOL after switching on theradio again.

PHONE

If your vehicle is equipped with a handsfree system, you can switch on or off themonophone play function of the mobile phone calls via the loudspeakers of thevehicle.

AUX

Switching on or off the functions of the external audio source.

You can set the desired value in the range of LEV1 to LEV3. If you set the value OFF,the tone is not replayed from the external audio source.

REG AUTO / REG OFF

Certain programs of the broadcasting companies are divided into regionalprograms at specific times. That is why in individual regions the regional programsof a station can broadcast different contents.

A1

A1

A3

A1

A3

A1

3

TP

TP

A1

TP

7/30/2019 96682353

7/12

Radio 5

First of all the unit attempts to set only alternative frequencies of the selectedstation.

If the quality is however so low, that there is a risk of a program loss, the unit alsoaccepts related frequencies.

When opting for REG AUTO the change to a regional related station can only beperformed if there is a risk of losing the station. When selecting REGIONAL OFF, thereceiver can access the regional related station unlimited.

BEEP

Switching on or off the tone signal when storing the radio stations.

CD

Play function of the CD tack (tracks) in continuous or random order. If you select CDPLAY, the tracks are replayed in normal order. If you select CD SCHFFL (Schuffle),the tracks are replayed in random order.

LOUD

In case of low volume level, the function reinforces the range of bass and treblefrequencies.

Note

Each setting change is stored by changing to another menu point.

Radio mode

Waveband switch-over

Your radio is fitted with the wavebands FM and AM, in order to change, press thebutton for some considerable time.

In the ranges FM1/AM1 and FM2/AM2 there are each 6 memory spaces available,in order to change, press the button briefly.

The process of searching for and storing the radio stations

Manual search

Set the frequency of the desired radio station by pressing the rockerswitch or .

Automatic station finding SEEK

The radio searches for the next radio station in the selected wavebandby pressing the button or .

Function SCAN

The radio station of the current waveband is briefly played (10seconds) by pressing the button .

This function is ended by pressing the button once again andthe current station is replayed.

Store station

After selecting the radio station, hold the station key , on which itshould be stored until it briefly switches to mute and a brief signalsounds.

Automatic station finding with storing the radio stations

Press the button . An automatic station finding is started duringwhich the 6 stations with the strongest signal in the memory level FM2and/or AM2 are stored. STORE is displayed on the display. This applies

only to the wavebands FM2 and AM2.

When storing the radio stations on the station keys is finished, you can call upthe desired radio station by pressing a station key .

A/F

A/F

SCAN

SCAN

A7

AS

A7A7

d

7/30/2019 96682353

8/12

Radio6

Note

The stored radio stations are updated and stored once again by repetitivelypressing the button .

Radio text

Certain radio stations transmit additional text information - called radiotext.

Note

The text information must not be available to all radio stations.

Depending upon the quality of the received signal, the radio needs a specifictime, in order to correctly read all the illustrated characters.

Traffic reports

Activating and deactivating the traffic information

Press the button , TP appears in the display. If a set radio station does nottransmit a traffic report, the radio searches for a station which transmits the trafficreport. TP SEEK is displayed on the display.

If no radio station which transmits the traffic reports is found, NO TP is shown onthe display.

An incoming traffic report automatically interrupts the CD play function or listeningto a radio station, which at that moment is not transmitting a traffic report. INFO

PRGNAME is displayed on the display. At the end of the traffic report, the radioautomatically returns to the original play function.

If you wish to deactivate the traffic information, press once again the button , TPgoes out on the display.

AS

TP

TP

CD l 7

7/30/2019 96682353

9/12

CD player 7

CD player

Using the system

Inserting the CD

Press the button , in order to select the source for the play func-tion: CD (internal CD drive), CDC (CD changer, if it is connected to theradio) or AUX (if it was activated in the menu Setup).

Carefully insert a CD into the CD case until it is automaticallydrawn in. The play function begins automatically. PLAY CDTR y (y =number of the current track) appears on the display.

Operating the CD player

Select track Press the rocker switch or during the play function of the CD, in

order to select the previous and/or the next title.

Press the button or for fast replay of the track (reverse orforward). The play function is continued after releasing the button.

Function SCAN

Press the button , in order to scroll through the CD. The first 10seconds of each title are played. SCANCDTRy appears on the

display.

In order to return to the normal mode, press once again the button.

End the play function of the CD

In order to end the play function of the CD and to activate the radio,press the button . The CD remains in the unit.

Ejecting CD

Press the button , the Cd is ejected.

Note

If the ejected CD is not removed, it is drawn in again for safety reasons.

If the radio is functioning in the TP mode before changing to the CD mode, theplay function of the CD is interrupted during the traffic reports and the unit switchesover to the radio mode. After the traffic reports have ended, the unit switches backonce again to the CD mode.

Information on how to use a CD

CD to jump

Uneven road surfaces and strong vibrations may cause the CD to jump.

Formation of condensation

When it is cold and after rain showers, moisture can deposit in the CD drive(condensation). This can effect the CD jump or impair the play function. In suchcases wait until the moisture has dissipated.

Notes for the care of the CDs

If a CD is soiled, please never clean the CD in the direction of a circle but rather witha soft fluffly cloth from inside to outside. In case of severe layers of dirt we recom-mend to clean the CD with a commercially available CD cleaner. Also in this case do

not clean the CD in the direction of a circle but rather from inside to outside andthen let it dry off.

Overheating protection

If the temperature in the unit exceeds 85C, the play function of the CD is ended forsafety reasons.

CD

A10

SCAN

SCAN

A/F

A11

CD player8

7/30/2019 96682353

10/12

CD player8

Caution

Never use liquids such as gasoline, paint thinner or disk cleaner, otherwise thesurface of the CD could get damaged.

Never expose CDs to direct sun rays!

Please never write or affix the CD!

Note

Dirt or damage of a CD can lead to difficulties when reading the information. Thedifficulty in reading the error depends on the dirt or on the severity of the mechan-ical damage. Severe scratches cause reading errors which can make the CD jump orget stuck. All CDs must be treated carefully and always be stored in a protectivecase.

External CD changer

Your radio can be equipped with an original CD changer which can beinstalled in your vehicle.

In the mode of the integrated CD player, press the button severaltimes until CDC appears in the display, in order to activate the playfunction of the external CD changer. PLAYCDxTRy (x = number ofthe CD in the CD changer, y = number of the current track) appears onthe display. If no external CD changer is connected, NO CDC appearsin the display.

Select a CD with a station key . NO CD is displayed for not assigned

positions.

Further displays on the display:

CHK MAGAZINE - the CD changer is scrolling through the CD magazine at thismoment and is not yet ready to use. The play function begins when the search hasended.

NO CD MAGAZINE - there is no CD magazine in the CD changer.

CD

A7

7/30/2019 96682353

11/12

koda Auto pursues a policy of constant product and model development. We trust that you will understand that changes to models interms of shape, equipment and engineering, may be introduced at any time. It is therefore not possible for legal claims to be madebased on the data, illustrations and descriptions contained in this Owners Manual.Reprint, reproduction or translation, either in whole or in part, is not permitted without the written consent from koda Auto.

koda Auto expressly reserves all rights relating to copyright laws.

We reserve the right to make changes to this document.

Published by KODA AUTO a. s.

KODA AUTO a.s. 2007

7/30/2019 96682353

12/12

www.skoda-auto.com Autordio Melody s CDkoda Auto anglicky 11.07

S00.5610.49.20

1Z0 012 101 F

*1Z0012101F*