360grad En 0903:360grad Final.qxd - Hydroteam.gr · Statico SE – The bridging link between the SD...
Transcript of 360grad En 0903:360grad Final.qxd - Hydroteam.gr · Statico SE – The bridging link between the SD...
PNEUMATEX
360°
PNEUMATEX
Product overview as per 03.2009International edition
Products | Applications | Benefits
P
Pro
duc
t o
verv
iew
Mühlerainstrasse 26CH-4414 Füllinsdorf
Phone +41 (0)61 906 26 26Fax +41 (0)61 906 26 27
www.pneumatex.com
Transfero pressure maintenance and Vento degassing for particularly high pressuresThe boom in Asia and the general tendency in urban areas to build higher and higher hasbeen accelerating the demand for pressure maintenance and degassing stations designedfor particularly high pressures. The Transfero and Vento families for heating and cooling systems are therefore being extended with the ...P types for pressures above 10 bar. ThePowerCube panel is designed for a 3 x 400 V input and is fitted with an Emergency Offmains isolator. An optional 60 Hz version is also available.
Redox for comprehensive water treatmentThe famous Zeparo separators for micro bubbles and dirt particles have been extendedwith the Redox ZUR range. The Redox can also reduce the oxygen content in system water and is therefore suitable for comprehensive water treatment in small heating, solarand chilled water systems.
DLV – New generation of lock shield valves to meet all customer requirementsLock shield valves are required for isolating and draining expansion vessels. Sounds sim-ple, but the types available on the market do not meet all customer requirements. Pneu-matex has therefore developed its own DLV lock shield valve.
Pneumatex AG reserves the right to make technical changes at any time.
New Products for 2009
P
Pro
duc
t o
verv
iew
pneumatex.com
03
Table of contents
Pressure maintenance heating technologyReliable pressurisation is the basic requirement for a gentle and trouble-free operation of heating,solar and cooling water systems. Completly sealed, modern systems with Statico, Compresso,Transfero and Pleno are the traditional hallmarks of the Pneumatex pioneers.
Statico
Compresso
Transfero
Pleno
Quality assurance water systemsThe quality of the heat transfer medium is decisive for the reliability and durability of a system.Zeparo separators ensure bubble-free and sludge-free water. Vento degassing devices also removedissolved gases almost completely and are therefore particularly effective as problem solvers.
Vento
Zeparo
Pressure stabilisation drinking waterA stable water supply and economical, gentle handling of precious drinking water resources is thecore benefit of our Aquapresso expansion vessels. All aspects of specific hygienic requirementsare met.
Aquapresso
Accessories
Benefits of partnership
Being close to the customers generates trust
The evolution of a visionary idea
Product overview
04 | 05
06 | 07
08 | 09
10 | 11
12 | 13
14 | 15
16 | 17
18 | 19
20 – 23
24 | 25
26 | 27
Pro
duc
t o
verv
iew
04
Statico SD – Classic solution with discus shape ● practical suspension bracket for easy assembly● operating pressure: 3 | 10 bar● nominal volume VN 8 – 80 litres● Installation with bottom, side or top connection | from 80 litres with bottom or side connection
Statico SE – The bridging link between the SD and SU model series● cylindrical model● foot ring for upright assembly and easy transport● operating pressure: 3 bar● nominal volume VN 120 – 180 litres
Statico SU – Slim and elegant cylindrical shape which fits through any door opening● foot ring for upright assembly and easy transport● endoscopic inspection opening for internal inspections above 1,000 bar x litre● operating pressure: 3 | 6 | 10 bar● nominal volume VN 140 – 800 litres
Statico SG – The «Grand Vessel» with exchangeable airproof butyl bag● slim, cylindrical model● feet for upright installation● two flange openings for internal inspections● operating pressure: 6 | 10 bar● nominal volume VN 1,000 – 5,000 litres
staticoExpansion vessels with fixed gas charge for heating, solar and cooling water systems. The wel ded design and the legendary airproof butyl bag ensure extra ordinary reliability and safety.
Ppneumatex.com
Sound
Steel, welded, colour: beryllium
Practical
Suspension bracket for easy assembly
Helpful
Foot ring for easy transport
05
air proof
● addition of antifreeze up to 50% ● CE design-tested
according to PED/DEP 97/23/EC ● airproof butyl bag according to EN 13831
and Pneumatex internal standard● max. adm. temperature TS 120 °C● max. adm. bag temperature TB 70 °C● steel | welded | colour: beryllium
Statico vessels
The extremely long service life of the Statico vessels is a testamentto quality awareness at Pneumatex. Independent tests have irrevo-cably confirmed this:
Pneumatex airproof butyl bags can take the pressure longer!They are 5 times more leak-tight than the average value determinedfor conventional products. High costs due to continuous venting,corrosion and even early replacement can thus be avoided. A clearadvantage!
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Reliability and quality
Statico SD
Statico SE
Statico SU
Statico SG
5Years Warranty
A legend −the diffusion-proof butyl bag
compressoPrecision pressure maintenance ± 0.1 bar with compressors. The newly developed C-series are a future-orientated interpretation of the legendary Pneumatex automatic systems. They consist of aTecBox, a primary vessel and optional secondary vessels. Recommended use is with heating, solarand cooling water systems up to approx. 13 MW.
Pro
duc
t o
verv
iew
Compresso TecBox with 1 or 2 compressors CF | C | CPV | CX
• precision pressure maintenance +_ 0.1 bar
• particularly noise-free silentrun operation
• fillsafe water make-up monitoring
• fillsafe water make-up
• vacusplit spray-type degassing | for cooling water systems: cooling version,
insulated and vapor sealed
• capacity range with 1 compressor 7,500 kW
• capacity range with 2 compressors 13,000 KW
• capacity range without compressor depending on external air supply
• self-optimising BrainCube control
• high quality metal cover
• plastic cover as noise reducing hood with C 20
• compact assembly on the primary vessel for up to 800 litres
• variable installation in front of or next to the primary vessel
• with integrated wall mounting bracket
• max. advance temperature TV 110 °C
• CE-tested
Compresso Vessels Primary and secondary vessels (= ...E) CU | CUE | CG | CGE
• nominal volume VN 200 – 800 litres | 6 bar
• endoscopic inspection opening for internal inspections
• nominal volume VN 300 – 5,000 litres | 6 | 10 bar
• exchangeable airproof butyl bag
• corrosion-protected internal coating for minimum bag wear
• two flange openings for internal inspections
• including lock shield valve DLV
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
06 BrainCube
Ppneumatex.com
Intelligent
The self-optimising control
Safe Legendary
air proof
f ill safe
vacusplit
Diffusion-proof butyl bag
● 5-year warranty
Comprehensive spray-type degassing
in the vacuum
Water make-up which puts safety first
07
Compresso C 10 | CPVCompresso C 20
Compresso C 10 FCompresso CX
● addition of antifreeze up to 50% ● bag can be vented at the top,
condensate drain at the bottom● CE design-tested
according to PED/DEP 97/23/EC ● airproof butyl bag according to
EN 13831 and Pneumatex
internal standard● max. adm. temperature TS 120 °C● max. adm. bag temperature TB 70 °C● steel | welded | colour: beryllium
Compresso vessels
Compresso primary vessel with measuring foot
• including flex tube for the water-side connection
and lock shield valve with ball valve for fast draining
Compresso secondary vessel
• including assembly kit for the air-side connection
of the vessels and lock shield valve for the water-
side connection with ball valve for fast draining
silent runThe philosophy – take a good thing and make it even better – is constantly followed at Pneumatex.
However, although we are pioneers in the area of completely closedsystems, we are also followers of tradition. Thus the uncompro-mising quality of our diffusion-proof airproof butyl bags is also given the highest priority in the latest Compresso generation.
When combined with our innovative, self-optimising Brain Cubecontrol and silentrun construction, the legendary Pneumatex automatic systems are, however, completely redefined. Here, thefuture has already started.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Tradition and innovation
Compresso CU | CUE
Compresso CG | CGE
The silent Compresso
BrainCube
transferoPrecision pressure maintenance ± 0.2 bar with pumps, optionally with integral water make-up and degassing. They consist of a TecBox, a primary vessel and optional secondary vessels. Recommended field of application is in heating, solar and cooling wat er systems. The capacity rangeis almost unlimited.
Pro
duc
t o
verv
iew
* special systems upon request
** TI > 110°Cwith additional equipment
Paz PMIN and Liz IAB � page 18
* special sizes for Transfero TI
up to 20,000 litres
** TGIH > 110°Cwith additional
equipment Liz IAB � page 18
08
Ppneumatex.com
Ppneumatex.com
air proof
f ill safe
oxy stop
Intelligent
The self-optimising control
Efficient Legendary
Diffusion-proof butyl bag
• 5-year warranty
Partial-vacuum degassing
for completely bubble-free water
Water make-up which puts safety first
Transfero TecBox with 1 or 2 pumps T | TP | TV | TPV | TPV...P | TI
• precision pressure maintenance +_ 0,2 bar
• fillsafe water make-up monitoring
• fillsafe water make-up
• oxystop degassing
• dynamic elastic dynaflex pump operation
• capacity range with 1 pump 15 m | 5,000 kW
• capacity range with 2 pumps 15 m | 10,000 kW
• capacity range TI 15 m | 40,000 kW
• for particularly high capacities and pressures*
• self-optimising BrainCube control
• high quality metal cover
• high quality, solid, galvanized base
• variable installation in front of or next to the primary vessel
• max. advance temperature TV 110 °C**
• CE tested
Transfero Vessels Primary and secondary vessels (= ...E) TU | TUE | TG | TGE | TGI | TGIE | TGIH
• nominal volume VN 200 – 800 litres
• endoscopic inspection opening for internal inspections
• nominal volume VN 1,000 – 5,000 litres*
• exchangeable airproof butyl bag
• two flange openings for internal inspections
• measuring foot for content measurement
• measuring foot for water level limiter **
• including lock shield valve DLV
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
�new: Transfero TPV...P
�new:
dyna flex
● addition of antifreeze up to 50% ● bag can be vented at the top,
condensate drain at the bottom ● CE design-tested
according to PED/DEP 97/23/EC ● airproof butyl bag according to EN 13831
and Pneumatex internal standard● max. adm. temperature TS 120 °C● max. adm. bag temperature TB 70 °C● steel | welded | colour: beryllium
Transfero vessels
Transfero primary vessel with measuring foot
• including assembly kit for the water-side connection
with 2 bar safety valve* and ball valve for fast draining
* with TI at the TecBox
Transfero secondary vessel
• including flexible hose for the water-side connection
and lock shield valve with ball valve for fast draining
Transfero TI
09a
Sustainable benefit for the customers is always the central issue at Pneumatex.
When looking for new, even more efficient solutions we also main-tain close contact with well-known research insti tutes. Our widerange of experience means that we can develop new solutions ona tried-and-tested basis, and the oxystop degassing in TransferoTV is no exception. The basic principle was the proven re al isationthat the frequent flush ing of unpressurized diaphragm expansionvessels can enrich the oxygen content. We therefore degas sepa-rately according to the oxystop principle using a special ve ssel. Thesystem is perfectly complimented by the dynaflex pum p operation.Speed- regulation means that the de gassing as well as the start-up and shut-down operation is of an elastic design.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Focussed and future-orientated
Transfero TU | TUE
Transfero TG | TGETransfero TGI | TGIE
Transfero TGIH
Dynamically like a pump, elastically like a compressor
Transfero T | TP | TV | TPV�new: Transfero TPV...P
plenoPressure monitoring and filling device as recommended by EN 12828-4.7.4. The Pleno ensures that the water reserve required for optimum functioning of the expansion vessels is given at all times.If the level drops below the minimum, water is automatically added to the system. The «fillsafe» electronically monitors and controls the water make-up and ensures maximum safety.
Pro
duc
t o
verv
iew
Ppneumatex.com
Pleno P
• water make-up without pump
• external control from pressure-maintaining or degassing stations
• with contact water meter and a back flow preventer type BA | EN 1717 | DVGW, SVGW, KIWA and CSTB tested
• with integrated wall mounting bracket
Pleno PI
• fillsafe water make-up without pump
• pressure-dependent for expansion vessels
• self-optimising BrainCube control
• with contact water meter and a back flow preventer type BA | EN 1717 | DVGW, SVGW, KIWA and CSTB tested
• with integrated wall mounting bracket
Pleno PI 9.1
• fillsafe water make-up with 1 pump
• pressure-dependent for expansion vessels and level-dependent for pressure-maintaining stations
• self-optimising BrainCube control
• with contact water meter and a break tank type AB | EN 1717 | SVGW tested
• high quality metal cover
• with integrated wall mounting bracket
Pleno PI 6.1 | PI 6.2
• PI 6.1 fillsafe water make-up with 1 pump | PI 6.2 fillsafe water make-up with 2 pumps
• pressure-dependent for expansion vessels and level-dependent for pressure-maintaining stations
• self-optimising BrainCube control
• with contact water meter and a break tank type AB | EN 1717 | SVGW tested
• high quality metal cover with handles
• floor standing
Hygienic
Protection of the drinking water system with back flow preventer or break tank
10
11
f ill safe
● CE tested● max. adm. temperature TS 30 °C● max. adm. ambient temperature TU 40 °C● max. adm. pressure PS 10 bar
Pleno
Pleno P
Pleno PI
Pleno PI 9.1
Pleno PI 6.1 | PI 6.2
You can rely on our know-how – from product development to careful selection of materials and production through to competenton-site support and advice.
The safety and reliability of our Pleno water make-up systems hasa name: fillsafe. The process is monitored comprehensively by the integrated contact water meter and continuous elec tro nic checkof water make-up quantity, -time and -frequency.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Safety creates trust
Water make-up, which makes it safe
12
ventoPressure drop degasser according to the vacusplit principle. Through the atomizing process of thewater in a special vacuum vessel, the gases are separated completely from the water. A water make-up system may be integrated as an option. It is used in heating, solar and cooling water systems to facilitate central venting of the system and minimise corrosion.
Pro
duc
t o
verv
iew
P
* with VP 6.2 E | VP 10.2 E
* with VP 6.2 EC | VP 10.2 EC
pneumatex.com
Cooling
Condensation stopkeeps it dry.
f ill safe
Water make-up which puts safety first
12
Vento TecBox for heating systems
V V...E VP...E VP...PEC
3 4 6 8 10 4 6 8 10 13 19● vacusplit spray-type degassing● degassing programs for permanent operation
and time-controlled eco interval operation● gas-content dependent eco automatic operation● fillsafe water make-up monitoring● fillsafe water make-up● 2 pumps*, including a stand-by pump for water make up● VA max. water content of the system | 100 m3
● VA max. water content of the system | 200 m3
Vento TecBox for cooling water systems – cooling version, insulated and vapor sealed
V...C V...EC VP...EC VP...PEC
3 4 6 8 10 4 6 8 10 13 19● vacusplit spray-type degassing● degassing programs for permanent operation
and time-controlled eco interval operation● gas-content dependent eco automatic operation● fillsafe water make-up monitoring● fillsafe water make-up● 2 pumps*, including a stand-by pump for water make up● VA max. water content of the system | 100 m3
● VA max. water content of the system | 200 m3
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
�new:
�new: Vento VP...PEC
1313
● BrainCube control● high quality metal cover with handles● addition of antifreeze up to 50%● max. adm. temperature TS 70 °C V 3 - V 6
TS 90 °C V 8 - V 19● max. adm. ambient temperature TU 40 °C● CE tested
Vento TecBox
vacu splitA traditional approach at Pneumatex is always to be one step aheadof general developments. Therefore, at the beginning of the nineties,intensive investigations by our engineers of the central venting andde gassing of closed water circuits were already underway. The result: Vento, with patented vacusplit technology has paved the wayfor vacuum degassing in building systems.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Pioneering spirit and technological leadership
Comprehensive spray-typedegassing in the vacuum
Vento V... | V...E | V...C | V...EC | Vento VP...E | VP...EC�new: Vento VP...PEC
zeparoComprehensive range of products for venting and separation of micro bubbles, sludge, oxygen andmagnetite in heating, solar and cooling water systems. The diversity of the applications as well astheir modular construction is unique. The helistill separator – a brand new development – makes theseproducts incredibly efficient.
Pro
duc
t o
verv
iew
Ppneumatex.com
Dry14
leak free
Dry automatic air vent
heli still
The innovative separating principle
Innovative
magn attract
Efficient
For more efficient magnetite separation
�new: Redox ZUR
Universal
DN 20 – 40
Industrial
DN 50 – 300
Extended
Separator detachable | DN 50 – 300
Universal
DN 20 – 40
Universal
DN 10 – 25
Adapter ZPA
Redox anode ZPR
Magnet Attachment ZIMA
Thermal insulation ZHI
Zeparo Separator
Zeparo Low loss header
Zeparo Automatic air vent
Zeparo Accessories
• for connecting a vent pipe
• to be replaced for Zeparo ZUR
• for Zeparo ZI and ZE | T-branch with magnetic rod and pocket to increase the magnetite capture
• for Zeparo ZI | rockwool | 2 part galvanized steel cladding | easy to fit with toggle clamps
1) option solar | 2) option vertical installation | 3) with flange connection or welding connection
Top eXtra
ZUTX (DN 25)
Top Solar
ZUTS (DN 15)
Purge
ZUP (DN 10)
Top
ZUT (DN 15–25)
Hydraulic separation, micro bubbles, sludge
Collect
ZUC
Hydraulic separation, micro bubbles, sludge, with magnetic action
Collect Magnet
ZUCM
Micro bubbles,
sludge
Kombi
ZUK
Kombi
ZIK 3)
Kombi
ZEK 3)
Micro bubbles,
sludge,
with magnetic action
Kombi Magnet
ZUKM
Kombi + Magnet
ZIK 3) +ZIMA
Kombi + Magnet
ZEK 3) +ZIMA
Micro bubbles,
sludge,
with magnetic action,
with oxygen reduction
Redox
ZUR 25
Sludge,
with magnetic action
Magnet
ZUM 2)
Omni + Magnet
ZIO 3) + ZIMA
Micro bubbles
Vent
ZUV 1) 2)
Omni
ZIO 3)
Sludge
Dirt
ZUD 2)
Omni
ZIO 3)
�new:
15
heli still
● addition of antifreeze up to 50%● max. adm. temperature TS 110 °C
solar TS 160 °C● max. adm. pressure PS 10 bar
Zeparo
The targets were set very high – and they were surpassed! The Zeparo system, developed in a very short space of time by the Pneumatex engineers for separation of micro bubbles, sludge andmagnetite, is unique.
For the first time it is now possible to combine a few starter moduleswith a diverse range of intelli gent function solutions. The helistill separator, the core of all separators, is the optimised result of numerous trials. And the result is convincing: The degrees of separation determined at the Technical University Dresden set newstandards. The sludge separation performance of the magnet-based versions even exceeded these values.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Versatile and efficient
The combined, innovative separating principle
Zeparo Separator
Zeparo Thermal insulation
Zeparo Automatic air vent
Zeparo Low loss header
�new: Redox
Pro
duc
t o
verv
iew
16
aquapressoExpansion vessels with fixed gas cushion for drinking water systems. The air proof butyl bag, madefrom special butyl rubber and suitable for drinking water, is legendary. Together with the full flow-through, the vessels offer a unique standard of hygiene.
Aquapresso A – no flow-through
AD | AU | AG● certified acc. to SVGW | ACS | PZH● nominal volume VN 8 – 80 litres | 10 bar | discus shaped● practical suspension bracket for the easy assembly | bottom connection● nominal volume VN 140 – 600 Liter | 10 bar | slim, cylindrical model● foot ring for upright assembly and easy transport● endoscopic inspection opening for internal inspections● nominal volume VN 700 – 5,000 litres | 10 bar | slim, cylindrical model● nominal volume VN 300 – 5,000 litres | 16 bar | slim, cylindrical model● exchangeable airproof butyl bag ● feet for upright installation● two flange openings for internal inspections
Aquapresso AF – flowfresh full flow-through
ADF | AUF | AGF● certified acc. to DVGW | SVGW | ACS | PZH● nominal volume VN 8 – 80 litres | 10 bar | discus shaped● practical suspension bracket for the easy assembly | top and bottom connection ● nominal volume VN 140 – 600 litres | 10 bar | slim, cylindrical model● foot ring for upright assembly and easy transport● hydrowatch for tightness control of the bag● endoscopic inspection opening for internal inspections● nominal volume VN 700 – 5,000 litres | 10 bar | slim, cylindrical model● nominal volume VN 300 – 5,000 litres | 16 bar | slim, cylindrical model● exchangeable airproof butyl bag● feet for upright installation● two flange openings for internal inspections
Ppneumatex.com
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Practical
Suspension bracket for easy assembly
Legendary
The diffusion-proof airproofbutyl bag for drinking water
Safety first
hydrowatch – bag integritymonitoring
17
f low freshPneumatex is committed to high ethical principles. Thus our environmental management is certified according to ISO 14001:1996.We exercise special diligence with regard to the products which havea di rect in fluence on the welfare of people.
For the Aquapresso bags, we therefore only use selected butyl rub-ber which is suitable for drinking water. This rubber is vulcanised in line with our tried-and-tested traditional method and not sprayed –thus the bags remain absolutely free from any chemical additiveswhich would otherwise be required during production. The result,combined with our flowfresh full flow-through and hydrowatch bagintegrity mon itoring, is completely hygienic.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Environmentally-aware and responsible
● certified according to PED/DEP 97/23/EC● airproof butyl bag according to EN 13831
and Pneumatex internal standard ● max. adm. temperature TS 120 °C● max. adm. bag temperature TB 70 °C● steel | welded | colour: beryllium
Aquapresso vessels
Aquapresso AD
Aquapresso AG
Aquapresso AU
Aquapresso AUF
Aquapresso AGF
Aquapresso ADF
The full flow-through with fresh water guarantee
18
High quality accessories complete the range of Pneumatex pressure maintenance products. Thustechnology becomes system technology. These products are suitable for application in systems specified to EN 12828 and SWKI 93-1.
Pro
duc
t o
verv
iew
accessories
Accessories for pressure maintenance
Intermediate vessels – Protection against inadmissible temperatures in expansion vessels● DD: 110 °C, 8 – 80 litres | DU: 110 °C, 140 – 600 litres | DG: 180 °C, 700 – 5,000 litres● DD, DU: in accordance with PED/DEP 97/23/EC | DG: CE design-tested according to PED/DEP 97/23/EC
Safety valves – Protection of the maximum pressure on heat generators● DSV-H: 2,5 / 3 bar, DN 15 – 50 | DSV-DGH: 1–10 bar, DN 25 – 50● CE component inspected
Blow off vessels – Installation behind safety valves for the separation of steam/water mixtures● ET 32–125 | 65–250 | 100–400 | 150–600● constructed according to SWKI 93-1, amendment 1
Fittings● protection of the heat generator and the system from overheating in case of lack of water● with or without lock | component inspected TÜV-HWB-96● maintenance and disassembly of expansion vessels● with screw connection | protected from inadvertent closing | with drain valve● control of the filling pressure at expansion vessels● H up to 60 °C | TH with thermometer up to 120 °C● shut-off of manometers● pressure measurement only with pressed piston, otherwise the manometer is unpressurized
Accessories for control modules● communication module for BrainCube control | 6 digital inputs, 9 volt free digital outputs● communication module for BrainCube control | 2 separated analogue outputs 4-20 mA● software extension for BrainCube control | allowing intelligent interconnection of up to 4 Compresso or Transfero● water level controller | additional equipment for systems > 110 °C● minimum pressure limiter | additional equipment for systems > 110 °C
P
Low water protection WMS
�new: Lock shield valve DLV
Manometer H | TH
Push button valve DH
ComCube DCD
ComCube DCA
Master-Slave DMS
Liz IAB
Paz PMIN
pneumatex.com
18 Reasonable
The small DD for return temperatures of over 70 °C, e.g in solar systems – with suspension bracket for easyassembly
Useful
Statico with lock shield valve
�new: DLV
1919
Intermediate vessels DD | DU | DG
Accessories for control modules: Paz PMIN | ComCube DCD |
ComCube DCA | Liz IAB
Safety valves DSV 15-50
Blow off vessel ET
a
From the safety valve to the pressure gauge through to the inter -mediate vessel – the Pneumatex product line is complemented bya wide range of customer-friendly accessories. This is one-stop sys-tem technology.
Choose Pneumatex quality – also when it comes to the accessories.
You can find additional benefits for a partnership with Pneumatex from page 20 onwards.
Quality down to the last detail
Fittings WMS | DH | DLV
�new: DLV
Ppneumatex.com
Ppneumatex.com
20
Advantages
Advantages
Advantages
A legend — the diffusion-proof butyl bag
Quality characteristic for Pneumatex butyl bags in Statico, Aquapresso, Compresso and Transfero vessels.
For Aqua presso in special drinking water version.● Vulcanised bag of high-quality butyl rubber with high diffusion resistance.● Design-optimised, two fold attached butyl bag with approximate nominal volume, no over expansion, minimal
wear.● Water in the butyl bag, no contact with the vessel wall, no corrosion.● Long service life, no costs through premature replacement.● Minimum operational costs through reliable, almost maintenance-free operation at stable pre set pressure. ● In trials with 8 manufacturers, Pneumatex had the best performance and leading edge:
minimal primary pressure loss (see chart),
no initial overpressure necessary,
no inclusion of residual water.● No consequential costs due to corrosion
thanks to the double protection of the
airproof bag:
1. Protection of the vessel.
2. Protection of the system.
For Compresso and Transfero vessels
minimal oxygen diffusion via the bag.● 5-year warranty at Statico,
Compresso, Transfero.
The silent Compresso
Quality characteristic for Pneumatex Compresso pressure maintaining stations.● Brand-name compressors with extremely quiet running and sound level of approx. 59 dB(A) with C 10
and 64 dB(A) with C 20.● C 20 with noise reducing hood.● Can also be used in areas that are sensitive to noise. ● Minimal operational costs due to reliable, almost maintenance-free operation.● Long service life through wear-resistant, tried-and-tested construction.● Highest capacity with minimum dimensions.
Water make-up, which makes it safe
Quality characteristic for Pneumatex make-up systems Pleno and integrated make-up systems in Vento,
Compresso, Transfero. Also for devices without make-up, an electronic fillsafe make-up monitoring
is contained in the BrainCube control.● Controlled make-up by means of contact water meter and electronic check of the make-up quantity,
time and frequency.● Optional protection of drinking water with break tank AB or system separator BA EN 1717.● Fully automated, permanently stable pressure maintenance by guaranteeing the water reserve.
EN 12828 recommendation as pressure maintaining monitoring device.● Uncontrolled make-up e.g. through leakages is detected and stopped.● Safety checked according to international regulations.
Primary pressure loss of expansion vessels according to the measurements of an independent institute
Rela
tive
pri
mary
pre
ssu
re lo
ss
Average competitors
100%
Manufacturer
Pneumatex best competitor Average competitors Worst competitor
Pneumatex
160%
140%
120%
100%
80%
60%
40%
20%
0%20%
BENEFITSfor partnership
air proof
silent run
f ill safe
Ppneumatex.com
21
Advantages
Advantages
Advantages
Advantages
dyna flex
oxy stop
vacu split
f low fresh
Dynamically like a pump, elastically like a compressor
Quality characteristic for Pneumatex Transfero pressure maintaining stations of the sizes 4.1 to 10.1 and 4.2 to 10.2.● Pressure gradient controlled pump speed.● Self-optimising partial load operation and elastical connecting and disconnecting dynamic.● Highest performance development – but can be metered, thus system protecting, smooth pump operation
with minimised switching frequency.● Minimisation of the necessary pressure accumulator volume.
Effective partial-vacuum degassing
Quality characteristic for Pneumatex degassing systems in Transfero pressure maintaining stations TV and TPV.● Degassing of the system and make-up water in a special vessel with slight vacuum on approx.
atmospheric gas saturation. Thus completely bubble-free water.● Degassing programs for continuous operation and eco interval operation.● Degassing outside the Transfero primary vessel, because we have detected:
1. With the usual degassing of oxygen-free system water in the expansion vessel, this can become enriched
with atmospheric oxygen through diffusion.
2. The gas discharge during degassing in the expansion vessel takes place with neutral pressure conditions
which are dependent on the diaphragm tension. This decreases the effectiveness and involves the risk of
drawing in air.● No operational costs through subsequent venting.● No consequential costs due to system corrosion, cavitation, erosion. No oxygen absorption of the system
water during degassing. Significant reduction of the oxygen content of the make-up water.● Effective degassing through defined gas discharge with overpressure at the end of the degassing cycle.● Negligible operational costs through time-controlled eco interval operation.● Quick degassing through adjustable time-limited permanent operation.
Comprehensive spray-type degassing in the vacuum
Quality characteristic for Pneumatex Vento degassing devices and Compresso CPV pressure maintaining stations.● Degassing of the system and make-up water in a vacuum vessel with degassing programs
for permanent operation and eco automatic or eco interval operation.● Dynamic atomizing process with spin effect for the almost complete separation of gas from water.● Controlled security by vacuum test.● No operational costs through subsequent venting.● Even with large air ingress e.g. repairs, no formation of bubble due to strongly absorptive water.● No consequential costs due to system corrosion, cavitation, erosion. Active corrosion minimisation through
separation of reactive gases in the system and make-up water.● Negligible operational costs through time-controlled eco interval operation with Vento V 3 and Compresso CPV.● Optimised operational costs through gas-content dependent eco automatic operation from Vento V 4 E.● Quick degassing through adjustable time-limited permanent operation.
The full flow-through with fresh water guarantee
Quality characteristic for Pneumatex potable vessels Aquapresso ADF, AUF, AGF.● Full flow-through of the airproof butyl bag. The complete dispensing quantity can be used for the flow-through.● Vulkanised airproof butyl bag, no chemical additives as with the spraying method.● Monitoring integrity of bag with hydrowatch.● The drinking water quality and the freshness are not impaired.● Safety checked according to international regulations.
22
Ppneumatex.com
Advantages
Advantages
Advantages
BENEFITSfor partnership
leak free
heli still
magn attract
The leak free automatic air vent
Quality characteristic for Pneumatex Zeparo automatic air vent and Zeparo with micro bubble separator.● Safe, dry discharge of separated gases.● Stable float handling in a large, flow-balanced chamber. Dirt and water are kept away
from the precision valve, also at high pressures.● Emergency screw plug with signal function just in case, in the unlikely event that it starts to leak.● No damaging leakage, no calcium deposit.● No operation and replacement costs through leaking automatic air vent.● Reliable, high capacity even at high pressures.
The combined, innovative separating principle
Quality characteristic for Pneumatex Zeparo micro bubbles and sludge separator as well as Zeparo Collect
low loss headers.● helistill combines all previously known separation principles.
heli… like helicoidal stands for the tangential dynamic when separating.
...still stands for the necessary slow-down during the defined separation of the gaseous and solid particles.● Integration with dry magnet separator is possible.● The implementation of the principle takes place with the completely new rust-free helistill separator in a
flow-balanced separation chamber.● Best separation performance for micro bubbles and sludge particles.● More efficient separation of magnetic fine sludges when combined with dry magnetic rod in pocket tube.● No additional energy input due to minimal pressure losses and always free-flow path.
A plus in matters of separation
Quality characteristic for Pneumatex Zeparo ZUM, ZUML, ZUKM, ZUCM with built-in magnetic rod and for
Zeparo ZI and ZE equipped with ZIMA Magnet Attachment.
• magnattract is the ideal complement of the helistill separation principle.
magn… means the magnetic force.
...attract means that the magnetizable particles are quite rapidly and efficiently attracted and separated.
• No supplementary energy is needed.
• No additional pressure loss.
• Dry magnetic rod – water and magnet are separated by a pocket.
• Simple desludging through withdrowing of the magnetic rod and elimination through the desludging valve.
• Particularly rapid and nearly complete separation of magnetic components out of the sludge, including the
most tiny particles.
• Without any operating costs.
• Available from DN 20 till DN 300: built-in the products ZU…M DN 20 –DN 40, ZI and ZE DN 50 – DN 300 can
be equipped with ZIMA Magnet Attachment from version 2008 onwards.
23
Advantages
Advantages
Proven safety
Quality characteristic for Pneumatex DSV safety valves for heat generators up til 120 °C.● Special concept with protected spring area by means of bellows or membrane.
The spring is entirely separated from the medium, there is no influence on the closing force.● The precision valve seat is executed in a softsealing version, for DSV-DGH valves with metallic support.
Thus, leak risk after opening is minimized.● Precision valve with guaranteed small opening and closing pressure tolerances of max. 10% between
opening and closing pressures, 0.5 bar for DSV-H valves. The DSV-DGH exceed the requirements of
EN ISO 4126-1.● Use of noble materials such as brass, nodular graphite iron and stainless steel. No corrosion,
the functioning is longlasting and reliable.● CE-mark. Guaranteed safety at technically highest level.● Reliable opening and closing means no excessive pressure, no water loss.● Long lasting lifetime, no costs because of early replacement.● Reduced exploitation cost because of reliable, almost maintenance free operation.● No additionnal costs caused by corrosion through the use of noble materials and the protection
of the spring chamber.● 5 years warranty.
Intelligent and easy to operate
Designation for the new Pneumatex controls in Compresso, Transfero, Pleno and future Vento.● Universal control for an optimised, safe system operation.● Control and monitoring of all pressure maintaining, degassing and make-up activities: Precision pressure
maintenance | fillsafe make-up | oxystop degassing | vacusplit degassing | dynaflex pump operation.● Self-optimising with memory function.● Intuitive, operation-orientated menu layout, in German, English, French and Dutch | further languages
can be supplied upon request.● Illuminated graphic-enabled 8-line display for display of all relevant parameters.● Numerical and graphical display of pressure and content.● User-friendly encoder with scroll and select function.● Electrical connection 230 V/50 Hz with special coupling for network separation.● Data interface RS 485.● Volt free, individually programmable digital outputs.● Optimum operation through swivel adjustment of the control.● You save time: Simple, intuitive operation. Uniform operational concept for several applications.● They optimise the system operation: No adaptation or readjustment. Once started up, the
BrainCube adapts to the application conditions through self-optimisation.● They vary worldwide: 4 standard languages and further individual selection is possible.
The special electrical network separation coupling achieves independence from the customary plug systems.● They are future-proof: You can program the volt free digital outputs according to your requirements.
The RS 485 interface offers the possibility of the data link to all individual and standardised BUS systems.● Functions via RS 485: ComCube extension offering an additional 6 inputs and 9 outputs |
Master-Slave and other intelligent coupling of TecBoxes.
BrainCube
Ppneumatex.com
secuguard
Ppneumatex.com
24
Your opinion matters to us. Especially in this era of modern communication methods, personal contact with our customers is especially important to us: Exchanging views, answering questions, find-ing solutions. Our specialists are always available as contact persons. Personally – on site! Nevertheless, you should also take advantage of our new internet portal. At www.pneumatex.com,you are provided with detailed information on a day-to-day basis and with SelectP! you can calculateyour system easily online.
BEING CLOSEto customers generates trust
Head office Switzerland
Pneumatex AG Phone +41 (0)61 906 26 26Mühlerainstrasse 26 Fax +41 (0)61 906 26 27CH-4414 Füllinsdorf [email protected]
Agencies www.pneumatex.com
25
Ppneumatex.com
The Pneumatex quality standard maintained by the pas sionof our employees.
At the manufacturing plants – Füllinsdorf, Switzerland and Vieux-Ferrette, France – swiss quality, precision and re liability are traditionally maintained. Our quality is of course also certified: ISO 9001:2000 | ISO 14001:1996 | PED/DEP 97/23/EC. You can also rely on this in the future.
We regard partnerships as the basis for creating new solutions.
The familiar contact with the market provides us with ideas for the future. Ideas are developed into real products at our research and dev elop ment department in collaboration with strong internationalpartners from the fields of industry and research. This is how we create new solutions — and initiate trends. Excellent examples arethe unique helistill sep ar at or principle or the BrainCube control – thecore of our completely revised system technology.
Quality is our passion
Ppneumatex.com
26
1909
1945 – 1955
1955 – 1990
1990 – 2002
2002 – 2005
2005 – 2007
2007 – ...
Establishment of an installation company
Carl Stücklin establishes a company for the «Construction phase of central heating and sanitary systems». He
soon stands out from his competitors due to his unconventional ideas.
From installation company to the production and development company
Under the leadership of sons Paul, Kurt and Julius, the Stücklin company develops following the hard years of war
to a system supplier. Now the company is capable of designing and manufacturing. With own boilers and radia-
tors, everything can be offered from one source.
The expansion technology arrives – and sealed heating systems are born
The boiler construction is still in the foreground. However the revolution of the expansion technology is imminent.
| In the mid fifties Paul Stücklin is the first to install a bag of butyl rubber into a expansion vessel. These are the first
stages of the sealed heating systems, the birth of the legendary airproof butyl bag as we know it today. | One
pionieer action is followed by the next. | In 1965 – the first series-manufactured compressor automat in the world.
| 1972 – the first transferomat. | From 1977, Andreas Stücklin manages the fate of the company.
The expansion technology becomes the core business
At the end of the eighties, all activities are focussed on the sealed expansion technology. | In light of the awareness
that sealed systems cannot solve all problems, Pneumatex applies for a degassing patent in 1995. | 1995 – a
milestone: Vento, the first affordable vacuum degasser for heating systems experiences its success ful launch. In
the following years, an unrivalled technology for the pressure maintenance, degassing and water make-up is
developed. The idea for a complex system monitoring develops.
System technology at international level
In 2002, Karl Willemen takes over as main share holder of the newly-established Pneumatex AG. An insider with
Pneumatex blood and international vision. | The company is reorganised within two years . The product range
consistently focuses on modern water management in three business areas. | Pressure maintenance heating
technology, quality assurance of water systems and pressure stabilisation of drinking water | With SelectP!,
Pneumatex introduces the first online calculation program in the industry – which means up to date worldwide
customer service.
Dynamic Watermanagement – the consistent evolution of an idea
The business area of quality assurance for water systems open a further chapter of the Pneumatex
history towards the future: Dynamic Watermanagement – the combination of technology and know-how to
achieve integral system inspection and analysis. Our target: corrosion and troublefree operation of
systems with a long service life.
Pneumatex joins IMI Indoor Climate for even stronger technical HVAC offering
"This acquisition is a milestone in the way IMI Indoor Climate delivers energy efficiency and peace of mind to its
customers," said Sean Toomes, President of IMI Indoor Climate, "Combining the thought-leadership and techni-
cal know-how of both Pneumatex and TA, enables our HVAC customers to benefit from a fully integrated and
technically dynamic service."
For more information about IMI Indoor Climate visit www.imiplc.com.
of a visionary ideaTHE EVOLUTION
Stable pressure conditions, an excellent water quality heating andcooling systems as well as a reliable, hygienic potable water supply– these subjects define Pneumatex. User-friendly products of thehighest quality and a comprehensive customer service are our goal.Dynamic Watermanagement stands for innovation, user friendlinessand pioneering technology.
Pneumatex – Dynamic Watermanagement
WXP
RIN
EN
0109
03
Dynamic Watermanagement
Mühlerainstrasse 26CH-4414 Füllinsdorf
Phone +41 (0)61 906 26 26Fax +41 (0)61 906 26 27
www.pneumatex.com
Pneumatex – Dynamic Watermanagement
Innovative one-stop system technology: Statico, Compresso or Transfero combined with Pleno make-up and Vento degassing systems enable fullyautomated system operation with connection to the building management system.
| swiss made |