25 KNOTS @ 14,515 KG...TJ 611HH Specifications MHP: 400-800 (294-588 kW) RPM Range @ Jet: 635-800...
1
NAMJet | NAMJet.com | raptor@NAMJet.com | +1 303 371 9325 TJ 611HH Specifications MHP: 400-800 (294-588 kW) RPM Range @ Jet: 635-800 Impeller Diameter: 24” (610mm) Thrust Range (Bollard pull): 5900-9900 lbs. (26.25-44.03 kN) Speed Range: 0-35 knots Unit Weight (Dry): 1500 lbs. (680 kg) Material Specifications Intake, Hood, Steering: Aluminum 5086 Main Shaft & Coupler: Stainless Steel Impeller: 316 Stainless Stator Bearing (Water Lubricated): Thordon Composite Hardware & Fasteners: Stainless Steel Wear Ring/Stator: Aluminum 5086 25 KNOTS @ 14,515 KG TJ 611HH
Transcript of 25 KNOTS @ 14,515 KG...TJ 611HH Specifications MHP: 400-800 (294-588 kW) RPM Range @ Jet: 635-800...
![Page 1: 25 KNOTS @ 14,515 KG...TJ 611HH Specifications MHP: 400-800 (294-588 kW) RPM Range @ Jet: 635-800 Impeller Diameter: 24” (610mm) Thrust Range (Bollard pull): 5900-9900 lbs. (26.25-44.03](https://reader033.fdocuments.net/reader033/viewer/2022050609/5faff83d65093e5b170fd587/html5/thumbnails/1.jpg)
NAMJet | NAMJet.com | [email protected] | +1 303 371 9325
TJ 611HH Specifications
MHP:400-800
(294-588 kW)
RPM Range @ Jet:
635-800
Impeller Diameter:
24” (610mm)
Thrust Range (Bollard pull):
5900-9900 lbs. (26.25-44.03 kN)
Speed Range: 0-35 knots
Unit Weight (Dry):
1500 lbs. (680 kg)
Material Specifications
Intake, Hood, Steering:
Aluminum 5086
Main Shaft & Coupler:
Stainless Steel
Impeller: 316 Stainless
Stator Bearing (Water Lubricated):
Thordon Composite
Hardware & Fasteners:
Stainless Steel
Wear Ring/Stator: Aluminum 5086
25 KNOTS @ 14,515 KG
TJ 611HH