2013 Systems Coursesinfo.smithmeter.com/literature/docs/fmss003.pdf · Fee: $ 1,250.00 per person...
2
FMC Technologies Measurement Solutions, Inc. 737 N. Padre Island Drive Corpus Christi, TX 78406 PAYMENT Payment must be enclosed with your registration or received at least two weeks prior to the workshop start date (make checks payable to FMC Technologies Measurement Solutions). See registration form for methods of payment. General Metering Fee: $ 1,250.00 per person per course. Oil/Condensate Metering or Fiscal Gas Measurement Fee: $ 1,750 per person per course. REGISTRATION Transportation to and from the workshop’s location, hotel expenses, and meals (other than lunches during training) are the participant’s responsibility. Reservations are confirmed on a “first-come first-served” basis. Please note that space is limited and subject to change based on location. Cancellations must be made 30 days prior to the scheduled workshop in order to receive a full refund. In the event that a cancellation is made within 30 days of the workshop date, no refund will be given, however, you may transfer your registration to another comparable school of your choice one year from your cancellation date or offer a substitute attendee. FMC Technologies has the right to cancel a workshop if the attendance does not meet the five person minimum. In this instance, all payments will be fully refunded. Please contact our training coordinator at 361 289 3484 if you have a group of ten or more. Customized training, on or off-site, may be proposed. Complete the registration form and return it to FMC Technologies by one of the listed methods: For more information visit our website at www.fmctechnologies.com/measurementsolutions FMSS003 Issue/Rev. 0.1 (4/13) Mail Mail the completed registration form to: Training Coordinator FMC Technologies 737 N. Padre Island Drive Corpus Christi, TX 78406 Fax Fax the completed registration form to: 361 289 1115 E-mail Mail the completed registration form to: [email protected] 2013 Systems Courses General Metering Oil/Condensate Metering Fiscal Gas Measurement Measurement Solutions
Transcript of 2013 Systems Coursesinfo.smithmeter.com/literature/docs/fmss003.pdf · Fee: $ 1,250.00 per person...
FMC
Tec
hnol
ogie
sM
easu
rem
ent S
olut
ions
, Inc
.73
7 N
. Pad
re Is
land
Driv
eC
orpu
s C
hris
ti, T
X 7
8406
PAYMENTPayment must be enclosed with your registration or received at least two weeks prior to the workshop start date (make checks payable to FMC Technologies Measurement Solutions). See registration form for methods of payment.
General MeteringFee: $ 1,250.00 per person per course.
Oil/Condensate Metering or Fiscal Gas MeasurementFee: $ 1,750 per person per course.
REGISTRATIONTransportation to and from the workshop’s location, hotel expenses, and meals (other than lunches during training) are the participant’s responsibility.
Reservations are confi rmed on a “fi rst-come fi rst-served” basis. Please note that space is limited and subject to change based on location.
Cancellations must be made 30 days prior to the scheduled workshop in order to receive a full refund. In the event that a cancellation is made within 30 days of the workshop date, no refund will be given, however, you may transfer your registration to another comparable school of your choice one year from your cancellation date or o� er a substitute attendee. FMC Technologies has the right to cancel a workshop if the attendance does not meet the fi ve person minimum. In this instance, all payments will be fully refunded.
Please contact our training coordinator at 361 289 3484 if you have a group of ten or more. Customized training, on or o� -site, may be proposed.
Complete the registration form and return it to FMC Technologies by one of the listed methods:
For more information visit our website at
www.fmctechnologies.com/measurementsolutions
FMSS003 Issue/Rev. 0.1 (4/13)
MailMail the completed registration form to: Training CoordinatorFMC Technologies737 N. Padre Island DriveCorpus Christi, TX 78406
FaxFax the completed registration form to:361 289 1115
E-mailMail the completed registration form to:[email protected]
2013 Systems CoursesGeneral Metering
Oil/Condensate Metering
Fiscal Gas Measurement
Measurement Solutions
Cardholder’s Name
Cardholder’s Signature
Method of Payment (Payment must be received with registration, or at least two weeks prior to workshop start date.)
Check or money order enclosed (U.S. funds only) Wire TransferMake checks payable to FMC Technologies Measurement Solutions.Please charge registration(s) to my credit card or purchase card.
MasterCard VISA American Express
Exp. DateAccount Number
Security Code
(PLEASE PRINT)
REGISTRATION FORMPlease check the workshop and date. Please note that all workshops are conducted in English unless noted.
Registrant Information (Please submit a separate form for each participant.) (PLEASE PRINT)
Name
Title
Company
Street Address/P.O. Box
City State Zip Code Country
Telephone
E-mail Address
Special Diet Requested (please describe)
Company
Telephone
City State Zip Code Country
COURSE OBJECTIVESEach training course is designed to provide a full understanding of the basic principles of measurement, industry terminology, introduction to industry standards, and regulations. Emphasis is on practical application, troubleshooting, and the individual components necessary in standard metering applications.
COURSE HOURSTraining sessions are held from 9:00 a.m. to 4:30 p.m. each day. Check the dates for each course before confi rming your travel schedule.
ACCOMMODATIONSComplete hotel accommodation information for all locations can be found on our website, www.fmctechnologies.com/measurementsolutions then select “Customer Support” then “Training Workshops”.
WHO SHOULD ATTENDPersonnel who are just entering the industry or those responsible for maintenance and operations:
» Personnel who have assumed new metering responsibilities including disciplines such as maintenance, operations, applications, and engineering
» Personnel learning new metering applications design changes and improved metering methods
» Companies that demand more accurate and reliable metering
Workbooks and training manuals, containing technical papers applicable to the topics covered, will be provided with the courses.
Workshops are conducted in English unless noted. Please note that additional workshops are available upon request.
Special Diet Requested (please describe)
General MeteringHouston, Texas, USA
June 11-13, 2013
Erie, Pennsylvania, USA August 6-8, 2013
Corpus Christi, Texas, USA November 5-7, 2013
Oil/CondensateHouston, Texas, USA
June 17-21, 2013
Erie, Pennsylvania, USA August 12-16, 2013
Corpus Christi, Texas, USA November 11-15, 2013
Fiscal Gas MeteringHouston, Texas, USA
June 24-28, 2013
Erie, Pennsylvania, USA August 19-23, 2013
Corpus Christi, Texas, USA November 18-22, 2013
*Refer to reverse side for prices and payment information.
SYSTEMS COURSES
Technical hands-on training, an ongoing practice at FMC Technologies, helps our customers gain
the knowledge they need to meet their demands for more accurate and reliable measurement.
GENERAL METERINGCourse dates and locations:June 11-13 – Houston, TX, USA August 6-8 – Erie, PA, USA November 5-7 – Corpus Christi, TX, USA
Pre-requisites: Basic math and electrical experience not required but preferred.
Overview: The course combines theory, practical experience, and live demonstrations which will provide an understanding of basic processes within the industry.
Topics covered include: Understanding of the primary measurement principles, industry terminology, and an overview of metering processes and fi scal measurement.
OIL/CONDENSATE METERINGCourse dates and locations:June 17-21 – Houston, TX, USA August 12-16 – Erie, PA, USA November 11-15 – Corpus Christi, TX, USA
Pre-requisites: Basic math, electrical, and basic metering knowledge.
Overview: The course combines theory, practical experience, and live demonstrations which will provide an understanding of processes within the liquid measurement industry.
Topics covered include: Understanding of liquid measurement principles, liquid metering technologies, an introduction to industry regulations and terminology, and an introduction to the operation of fi scal oil/condensate metering systems.
FISCAL GAS METERINGCourse dates and locations:June 24-28 – Houston, TX, USA August 19-23 – Erie, PA, USA November 18-22 – Corpus Christi, TX, USA
Pre-requisites: Basic math, electrical, and basic metering knowledge.
Overview: The course combines theory, practical experience, and live demonstrations which will provide an understanding of basic processes within the gas industry.
Topics covered include: Gas measurement principles, gas metering technologies, an introduction to industry standards and terminology, and an introduction to the operation of fi scal gas metering systems.
