00 - General Info

7/25/2019 00 - General Info

1/14

Dear Customer,

The BAKS company was established in 1986. We are now a leading Polish manufacturer of carrying systems forpower, telecommunications, pneumatic, water, and other sectors. The latest technology, experienced personnel,coupled with investments in modern machines and equipment such as punching dies, folding machines, profile lines,welding robots, laser cutters, and in-house powder coating system allowed us to reach top standards.

Our products quality is confirmed by numerous certificates: -VDE certificate, issued by TV Rheinland Kln, confirms the safety of our products and strength of our cable traysystems presented in this catalogue (submitted products safe working load values contain the safety factor 70%,indicating that our systems have gained extra 70% on their true strength). TV is regarded as the most valuablecertificate, as it conforms to the PN-EN 61537:2007 standard, harmonized with the EU Directive on low voltage up to 1 kV.Based on the above Directive a CE Declaration of Conformity is issued for products purchased from our company.

-So called E 30, E 90", fire resistance certificates, (conforming to the DIN4102-12 standard), for assuring powersupply continuity in the temperature of 1,000 C, for 30 and 90 minutes respectively. We have already carried outapproved testing with the following cable producers:

- Bitner, Dtwyler, Elkond, Eupen, Faber, Nexans, Prakab, Studer, Telefonika, and Technokabel. - British Standard Certificate BS-EN 61537:2007 - Certificates DMT Dortmund

- Classifications FIRES Batizovce -TV ISO 9001:2000 certificate, confirming that all products designed and manufactured by BAKS comply with

the ISO 9001:2000 quality system. - voluntary recommendation covering all manufactured products except for the fire

resistance system.

In this catalogue more than 20,000 products are offered. All the production lines have been modernized and adjustedto provide our customers with even the most advanced solutions based on supplied documentation. As a respectedand reliable business partner we were invited to co-operate in construction of such significant projects in Poland asOrlen Pock, Rafineria Gorlice, Galeria Mokotw - Warszawa, VW Pozna, Philips Morris- Krakw, WarsawUnderground, and many others from foreign countries. BAKS strategy is to meet our customers' even mostdamanding needs by providing top quality products at the lowest price. This, together with our professional logisticservices found reliable among our Customers and proved effective through co-operation with more than 500wholesalers and distributors, made our company renowned and trusted.

For many years our products have been exported to numerous European countries, such as Austria, Azerbaijan,

Belarus, Belgium, Bulgaria, Croatia, The Czech Republic, England, Estonia, France, Spain, Lithuania, Latvia, Moldova,Germany, Russia, Romania, Serbia, Slovakia, Ukraine, and Hungary. We are proud of our ever increasing exportrates, a clear mark of quality and excellent services provided by BAKS.

We are looking forward to doing business with you!

Yours faithfully,

1info info

Kazimierz Sielski

The CompanyINFO

BAKS technology: the quality you can affordBAKS technology: the quality you can afford!

President


2/14

2info info

Technical Information

During the assembly in uncovered areas exposed to sheetcutting the anti-corrosion layer is likely to bedamaged. It is recommended to protect these areas throughapplying zinc paint in spray onto their edges.

The required thickness of zinc coating can be measured by multiplying the value of annual reductionby the expected time of operation. There are three basic methods of zinc coating offered that providefundamentally different thickness levels of the protective layer:

Electro Galvanizing (EG)According to the European harmonized norm EN 12329Small elements (bolts, nuts, washers) are covered with thin and uniform zinc coating in electrolyticbath, the coating is between 5 and 12 m, color is bright and shiny

Strip Galvanizing According to the Sendzimir Method (SG)According to the European harmonized norm EN 10346 Up to 3mm thick hot steel sheets are zinc-coated in mill. Thus produced, average ca.19m zinc layeris uniformly and firmly adherent. Such coating remains corrosion resistant even when damagedthrough cutting, perforating, or drilling. All types of strip galvanized trays, ladders, and most ofsupport elements are intended for application in predominantly dry premises of C1 and C2 class.

Mild Steel Hot-Dip Galvanizing (HDG)Dipping in molten zinc according to the European harmonized normEN ISO 1461:2011.Completely processed details small components (after the stages of cutting, bending, welding etc.)

are immersed in molten zinc at the temperature around 450-460C. This advanced technology basedupon the phenomenon of diffusion excellently protects steel against corrosion. It consists in zincatoms penetrating the outer surface of steel, thus forming a new, superficial iron-zinc all oy. Thearticles pulled out from galvanizing bath become coated with fine pure zinc layer.Depending upon the conditions of the whole galvanization process (period of dipping, process ofcooling, quality of surface in applied base material and its chemical constitution, etc.) the colour ofzinc coating surface may vary from bright and shiny to matt dark grey it will notinfluence the quality of protective layer whatsoever. In damp conditions white spots on the surfacemay appear. It is zinc hydroxide named 'white corrosion' this will not in any respect deteriorate thequality of protective layer, however, it will negatively impact the product's physical appearance. Alltypes of cable trays, ladders, and load-bearing elements coated with zinc though hot-dip galvanizingare recommended for prolonged outdoor exposure where condensation of fumes of aggressivechemical substances are active. Hot-dip galvanized products are used primarily in corrosiveenvironments classed as C4* where high relative humidity takes place (basements,garages, boiler rooms, etc.) and in very aggressive environments classed as C5-I and C5-M.*, wherecondensation of fumes of aggressive chemical substances, such as saltwater, flue gases from fossil-fuel combustion, etc. are present (e.g. large shipyards, refineries, petrochemical, chemical and gas-processing plants, and mines).

The following Information will instruct you in properties of coating against corrosion applied to our products.

The primary factor of selecting materials for installation is the environment of the cable route to be assembled.

Protection against Corrosion through Zinc-CoatingIn conditions defined as normal the best performance has been achieved in structural of structural steelwork with zinc coating.

The warranty period is established upon the thickness of zinc coating, as well as upon yearly reduction value of protection layerin relation to various environmental influence on zinc (acc. to the corrosion category).

Reductionof Protective Layer

(m)

CorrosionCategory

Examples of Environmentin Temperate Climate(for Information only)

C1insignificant

C2low

C3medium

C4high

C5very high

(industrial)

> 0.1 to 0.7

< 0.1

> 0.7 to 2.1

> 2.1 to 4.2

> 4.2 to 8.4

> 4.2 to 8.4

Indoor: heated buildings with cleanatmosphere, e.g.: offices, shops, etc.Outdoor:

Indoor: non-heated buildings withcondensation, e.g.: sport halls,warehouses, etc.Outdoor:atmosphere with low level of pollution

Indoor: production facilities withincreased humidity and moderate

pollution e.g.: breweries, laundries,creameries and dairies, etc.Outdoor: urban and industrialatmosphere

Indoor: chemical plants, swimmingpools, shipyardsOutdoor: industrial zonesand inshore areas with moderatesalinity

Indoor: buildings or areas withpermanent condensation andextreme pollutionOutdoor: industrial zones withdamp conditionsand aggressive atmosphere

Indoor: buildings or areas withpermanent condensation andextreme pollutionOutdoor: inshore and offshore areaswith intense salty atmosphere

Acc. to PN-EN ISO 12944-2/2001

C5-Mvery high(marine)

Parts and Thickness

Local Thicknessof Zinc Protective

Coating(minimum value)

(m)

Mean Thicknessof Zinc Protective

Coating(minimum value)

(m)

Steel >6mm

Steel >3mm to1.5mm to


3/14

info info3

Storage:Warehouse the productsin a roofed and aired location.Keep away from water!

Disclaimer:BAKS has a policy of continuous product development and reserves the right to alter or amend specifications, as necessary, withoutprior notice presented in this publication. This catalogue is designed to provide only preliminary technical Information whichrefers tostandard products manufactured by BAKS.

1. The products pre-packed for transport (i.e. delivered all wrapped in original packagefrom BAKS)should be keptunchanged in the storage that is dry and of air permeable conditions.

2. When storing avoid violent changes in humidity and temperature leading tothe decrease in thelevelof steam condensation. White corrosion may appear when the a/m conditions are not met.

3. In case temporary products storagein the open area proves necessary, provide dry and air permeableenvironment. Use an air permeable screen.

4. In case galvanized products gets wet, "white corrosion" can appear, it not cause reduction of zinc layerand do not affects corrosion protection, but decreases slightly appearance. However if the parts will notbe dried fast - it will cause total reduction of zinc layer and products will rust. If white corrosion appearthere are 2 possible way to prevent goods to get rusty:

5. Any damage to the product's sheet surface caused by its moisture will cause the rejection of anypossible claims.

Solution 1

Solution 2

- As fast as possible remove all plastic foil, - Lay elements in that way to prevent one touching to another

(by putting between them some galvanized metal, aluminium or plastic bars), - if there are additional dirt (soil, wet cardboard) clear it by water under pressure, - dry to prevent moisture condesation - store in dry place

- As fast as possible remove all plastic foil, - Lay elements in that way to prevent one touching to another

(by putting between them some galvanized metal, aluminium or plastic bars),

- if there are additional dirt (soil, wet cardboard) clear it by water under pressure, - dry to prevent moisture condesation - leave outdoors without any cover

PROTECT GALVANIZED AND PREPACKED PRODUCTSAGAINSTDAMP ENVIRONMENTS!!!

Claims will not be considered in theevent the goods are stored inappropriatelyandagainst the recommended storageconditions!

1

2

3

4

5

5

220V

Technical InformationINFO

Electrical Continuity

The International Standard of PN EN 61537: 2007* specifies methodology of safeworking load tests for wire mesh cable trays, cantilever brackets, pendants, andother fittings. Apart from mechanical requirements, this norm describesmethodology of testing electrical continuity, as well as describes the electricalrequirements that cable runways and couplers must meet.

The calculated impedances shall not exceed 50m (Z 50 m)across the joint (i.e. coupler or integral coupling), and 5 m

(Z 5 m/m) without the joint**. Certificate no. TM 61000061.001issued by TUV Rheinland Poland is a confirmation of meetingthe PN EN 61537: 2007 standard requirements for product safetyboth in respect of mechanical, and electrical performance. BAKShas accomplished non-standard tests for electrical continuity inthe testing facility of the Polish Building Research Institute (ITB),Warsaw, Poland.

* Polish version of IEC 61537:2006: Cable management Wire mesh Cable tray systems** Op. cit. IEC 61537-11-1: Clause 2: 2006: Electrical properties Electrical continuity, p. 31

Measurement System for the Test

of System Circuit Integrity

1.220V/12V2.Transformer3.Autotransformer4.Voltmeter5.Metal electrodes


4/14

4info info

EN ISO 9001:2008 Certificate


5/14

5info info

INFOVDE Certificate - Product Safety

VDE certificate refers to all cable managementsystems presentedin this catalogueand is a reliable confirmation of cable runwaysafe working loadvalues

as well as the achievement of a measure of circuit integrity of cable management

systems from BAKS. The International Standard PN-EN 61537:2007

is harmonised with the low voltage directive 73/23/EWG-Guideline CE to 1kV.

(70% safety ratio in strength values indicates additional 70% true strength reserve)


6/14

6info info

British Standard Certificate


7/14

7info info

Certificate ZHODY CSKS08Certificate of Conformity to apply and distributeBAKS products in Slovakia

Certificate GOSTCertificate of Conformity to apply and distributeBAKS products in The Russian Federation

Certificates

Certificate of Conformity to apply and distributeBAKS products in Czech Republic

Certificate of Conformity to apply and distributeBAKS products in Ukraine

INFO


8/14

Certificates

UP until now BAKS has carried out testswith the following cable producers:

Bitner, Dtwyler, Elkond, Studer, Technokabel andEupen, Faber, Kabtek, Nexans, Madex, NKT, Telefonika

8Info Info


9/14

9info info

Testing laboratory of the Building Research Institute in Poland (ITB) decided upon testing of fully assembled cable trays and ladders from BAKS manufactured fromstainless steel, that the above products fully comply with the PN-IEC 61537:2003 (U) standard in respect of electrical properties of maintaining system circuit integrity.Mechanical connections of cable tray and ladder lengths allows for equipotential bonding for electrical continuity in accordance with the requirements of this standard.

Hygenic Certificate that approves the use of cable trays and ladders together with support systems for applications inside andoutside residential and public utility buildings, and occupancies for industrial purposes including food processing.

Hygenic Certificate and Certificate of Compilance for Electrical TestsINFO


10/14

KGL/KGOL100H60/3

Weight in Unitsof Measurement

Lengthin mm

Widthin [mm]

Length in [m]/01 = 0.1m/2 = 2m

Height in [mm]

Product Symbol

Material

10info info

Basic ProductDimensions

System Category

Certificates

CatalogueNumber

Pack. Qty

KGL/KGOL...H60

3000KGL/KGOL100H60/3 1,18 160116100 6/18

Length

Lmm

CODE

Width

amm

CatalogueNo.

1m

kg

0,7 mm

Qty/m

Widthin mm

R 0,5L 0,7F 0,8J 1,0D 1,2P 1,5C 2,0M 2,5T 3,0E 4,0

V 5,0S 6,0O 8,0X 10,0

MaterialThicknes

Marked byLetters

Layout Guide

ReferenceDrawing

Product Table

Usable Cross-Section Table

Application of LoadCurve Diagram

Among problems which mayoccur with accurate selecting the cable tray:Safe working loadfor any particular tray at givenspacingof support.

Example:Cable tray type:KGL/KGOL100H60/3is supported in spans of 1,5m. How to define the safe working load for the cable tray?

The read out value indicates that the volume of about 115kg/m of cables can be safely laid within a 1,5m section.Because the spacing of supports is 3m, on the section of 1,5m spacing of supports,the volume of 225kg/m of cables can be safely laid.Coefficient of safety for safe working load is 70%.

Reading the diagram: On the spacing of supports axis read the value of 1,5m. Draw a line perpendicular to the spacing of supports axis

until it crosses the Qmax. on the load curve From the intersection point draw a line parallel to the

support bracket axis and to the left, up to the safe working load, then read the value 1,15 kN/m (~115 kg/m)

L L L L

1,0

2,0

0,5

0,0

1,0 1,5 2,0 2,5

Spacing of Supports in [m]3,0

5

20

15

25

30

10

1,5

0,0

SafeWorking

LoadQ

max.

inkN/m

Qmax.

f

TrayDeflection

fin[mm]atQmax.0,7

Thickn. (ga) [mm]:

1,15kN/m=~115kg/m

Spacing of Supports 1,5m

Deflection f

Safe WorkingLoad Qmax

15mm

Load Curve Deflection Line


11/14

11info info

Guide and description of the special marks on products

Our goal is to simplify work with catalogue. Why to decided to change descriptions of products to special marks.

Example of the snap-in connector

Software compatible with:AutoCAD: 2013 - 2014, 32/64 bitBRICSCAD: edition V12 - V13, 32/64 bit

ZWCAD: edition 2012

edition

BAKSCAD II new CAD software to design cable management systemsBAKSCAD II - new CAD software to design cable management systems

Product catalogue- List of all elements manufactured by company BAKS

- Direct Link between the products and its catalogue sheets

Support system- Posibility to include supports to the cable routes.

- 2 ways to define a supports: one by selectionof single products from BAKS catalogue, second

by chosing predefined construction prepared fordifferent types of cable routes.- Fast descrition of elements included in support

- Fast insertion of drawings shawingpredefined constructions

Loading simulation- Control of loading capacity and filling every

part of cable route. After adding supportsand cables to the cable routes program shows

possible overload or overfilling"

List of products- Generation of list of elements included on a project

with already calculated number of connectorsand screw sets and all products from support.

- Possibility to put table with list of elements directly

to the project or to XLS file.

Product selection- Possibility to select apropriate straight section of cablemanagement system with previously choosen cablesand support spacing

- Database for several cable producers- Possibility to allign cables to previously includedparts of cable ways

- Fast and easy description of included cablesin project

Drawing module- Possibility to add to the project elementsfrom all group of products:

- Cable trays- Wire mesh cable trays- Long span system of cable trays- Heavy duty outdoor cable trays- Cable ladders- Long span system of cable ladders- Underfloor trunking- E-30, E-90 fire protection system- There are two drawing methods:instertion of single blocks and fast drawing withautomatic insertion of bends

- Automatic selection of fittings to apropriate systemand dimensions- Fast describtion for all parts of designedcable route.

N

How to Navigate the Catalogue

E-90

INFO

ZLS...

Wire Mesh Cable Trays - Accessories

Snap-in Connector

ZLS

23

145

ApplicationJoining Wire Mesh Cable Tray LengthsFor cable trays H35, H60 and H110

CODE

ZLS1

CatalougeNo.

1pc.kg

Qty

901800 500,05

ZLS2 911810 500,05

ZLS3 911820 500,05

Attention! Choose connectror ZLS apropriate

type of wire mesh cable tray

ZLS1

CODEWire mesh cabletray parameters

60H60

60-200H60

100H110

Type of wiremesh cable tray

KWDS

KCS

KDSKDSZ , KSG 35-300H35 , 60-200H60

60-200H60KDS/KDSOSTANDARD

35-300H35KDS

60-100H60KGS

Guide:

NNew product Rapid assembly Assembly without

use of anyadditional tools

E90

Product availablealso in E-90 system

strong

Heavy dutyproduct


12/14

Cable Trays System of Side Heights

H30, H42, H50, H60, H80, H100, H110

Wire Mesh Cable Trays

System of Side Heights

H35, H60, H110

Section

I

Section

II

Section

III

Section

IV

Section

V

Section

VI

Section

VIII

Section

IX

Section

X

Outdoor Cable Trays Extra Heavy

Duty System of Side Heights

H50, H100, H200

Cable Ladders Side Heights

H45, H50, H60, H80, H100, H120

Long Span Cable Ladders Side Heights

H100, H110, H120, H150, H200

Vertical Cable Ladders

System of Side Heights

H55, H80

Support System - Channels, Angles, Z - Profiles,

DIN Rails, Flats, Accessories

Mounting and Supporting Accessories -

Rods, Chains, Wire Ropes, Anchors,

Sleeves, Screws

Important BAKS is introducing the multi-purpose

side rail for long span ca ble trays and ladde rs

Important! BAKS is introducing the multi-purpose

side rail for long span cable trays and ladders

Long Span Cable Trays Side Heights

H100, H110, H120, H150, H200Importan

side rail for long span cable trays and ladders

t! BAKS is introducing the multi-purpose

12info info

How to Navigate the Catalogue

Cable trays - power supply to machines

H50, H100, H200

Section

V

Section

VI

Section

VII


13/14

13info info

Support System Wall-Mounted Section

XI

Section

XII

Section

XIII

Section

XIV

Section

XV

Section

XVI

Section

XVII

Section

XX

Support System Ceiling-Mounted

& Suspended

Support Systems Beam Suspended

and Support System

Underfloor Trunking of Side

Heights H28, H38, H48

Wall Trunking System of Side

Heights H68, H100

Lighting Trunking System forFunctional and Decorative Tasks

Spring Steel Fasteners,

Cable Ties and Fixings

NEW PRODUCTS AND SOLUTIONSNEW

Section

XIXE30, E90 Systems

Section

XVIIISupport System of Photovoltaic

Cell Modules

How to Navigate the CatalogueINFO


14/14

14i i

Information

and DVDROM presentationProduct Catalogue and DVD-ROM presentation

The electronic version of this Catalogue is now available both DVD,and on our website:www.baks.com.pl.This electronic Catalogue allows our designers, installers, investors, and business

partners for fast and efficient work with our innovative solutions.The following are the advantages of this eCatalogue:

It allows for:- Searching for and localizing products according to a number of specified criteria- Generating sets of products that may be treated as an order, specification, or inquiry- Calculating cable routes systems work parameters (load, deflection, etc.)- Selecting cable route dimensions based on the expected cable concentration.

This eCatalogue distributed in form of aDVDcontainscomprehensive instructing materials, i.e. films and visualizations, which present

characteristicsof the company's products and systems, including demonstrationof assembly and installation instructions.

on

This eCatalogue,available on our website,allows for on-line ordersand provides Information on our innovative solutions.Included is an abridged version of the Product Catalogue in the electronic form.

Internet : www.baks.com.pl/en

00 - General Info

Documents

Transcript of 00 - General Info