►►FEDS INTO THE FUTUREFEDS INTO THE FUTURE

Presented ByPresented By

Add-On Technologies, Inc.Add-On Technologies, Inc.www.addontechnologies.com

N. Carolina, USA Ph: (704) 291-9533 Fax: (704) 291-7888N. Carolina, USA Ph: (704) 291-9533 Fax: (704) 291-7888

TellerCounts™ & EZ-WEDGETellerCounts™ & EZ-WEDGE

October 2010 2

A Versatile and Productivity-DrivenFamily of Interface Products

Developed by Add-On Technologies

On-Line Connectivity Has NeverBeen Easier!

What is TellerCounts?What is TellerCounts?

October 2010 3

The TellerCounts family of products are a combination of configurable software or hardware based utilities which simulate teller/operator key strokes. They automatically enter the currency count data directly into the PC Teller Application

Teller PC Tremendous Productivity Booster

Greatly Improves Workplace Efficiency

100% Accuracy in Copy of Counts into the Teller Workstation

Support for most major brand nameCurrency Discriminator/Sorters, Scale Devices, and Coin Sorters

What What DoesDoes TellerCounts Do? TellerCounts Do?

October 2010 4

• TellerCounts is directly connected via the printer output port on Desktop Currency Discriminator/Sorters, Scales and Coin Sorting machines

• Automatically converts printer output data into the digit entries required by the Teller Application, and sends those entries directly into the Teller’s computer

How Does it Work?How Does it Work?

October 2010 5

• As the currency count data comes out of a currency Discriminator/Sorter or Scale, the interface extracts the information for each denomination

• It stores each denomination - both the number of pieces and their value into memory

• When the cash count transaction is completed,

TellerCounts arranges these stored values and sends them into the PC via the Discriminator/Sorter “ACCEPT” button, just as if the operator/teller had entered everything required manually

• Count transfer typically occurs in less than a second

How Does TellerCounts Know How Does TellerCounts Know Where and How to Enter Data?Where and How to Enter Data?

• Most Teller/POS platforms use unique input screens • TellerCounts is easily configurable onsite for any

teller or POS PC application platform • TellerCounts places counted data values into the

proper places on the targeted teller/POS app screen

• TellerCounts can “Read the Screen” to identify the format of count entry needed

October 2010 6

What is a TellerCounts Interface?What is a TellerCounts Interface?

October 2010 7

• It is a standard USB device interface product

• It is a “software solution that does it all”… every version of TellerCounts has the capability to work with different teller platforms via easy and simple configurable settings

• It typically communicates with the PC via a USB port. It processes only the data received from a Desktop Currency Discriminator/Sorter or Scale machine

• It is also a highly specialized interface application

SUMMARYSUMMARY

TellerCounts a simple affordable solution

Easy configurable setup to individual platforms

Installation minimal involvement with IT Dept.

Onsite Configuration simple and directly on Teller’s PC

Coin Sorters TellerCounts supports select models

Printed Audit Trail for all processed transactions

(optional cable required)

October 2010 8

TellerCountsTellerCounts™™ Configurations Configurations

TellerCounts Standalone (USB)

WedgeNet RS-485

WedgeNet Wireless (USB)

TellerCounts Base Station/Client (LAN)

CASH-IN “Print-to-Screen” EZ-WEDGE (USB)

October 2010 9Click on a specific configuration to review, or continue to next slide to review all.

Add-On has the solutions for every situation ready for you now!

TellerCounts Standalone (USB)TellerCounts Standalone (USB)

Choose Standalone if TellerCounts will be used with one PC and one Bill Discriminator/Sorter or Scale.

The system* can optionally be installed as a Service on the Host PC, thus automatically operating in background mode without any interactivity from the user.

October 2010 10

Note: Selecting Standalone USB mode automatically launches the USB driver setup to occur during installation after the TellerCounts interface is completed. The USB mode requires a special USB cable with built-in software lock.

Back to Index

Host PC

USB "Dongle"

Serial Cable

Shinwoo SB-2000

*All required (product specific) cables are included in the basic system purchase price

Cashmaster Sigma 170

WedgeNet RS-485WedgeNet RS-485

WedgeNet/TellerCounts™ online currency discriminator systems provide a means to share a single currency discriminator between multiple teller PC’s, with data counts “wedging” into any Windows based application.

The counts are entered into the proper teller’s PC based on the teller number logged onto TellerCounts at that workstation.

No actual integration or program coding with the teller app is needed. Requires “hardwired” cabling to connect all devices.

October 2010 11Back to Index

WedgeNet Wireless (USB)WedgeNet Wireless (USB)

WedgeNet/TellerCounts™ online currency discriminator system provides a simple system to share a single currency discriminator between multiple teller PC’s, with the counts “wedging” into any Windows based application.

The counts are entered into the proper teller’s PC based on the teller logged-on to TellerCounts at that workstation. No actual integration or program coding with the teller app is required.

October 2010 12Back to Index

TellerCounts TellerCounts Base Station/Client (LAN)Base Station/Client (LAN)

Teller logs-on at Base Station. Teller Processes banknotes The Base Station reports the

banknote count output from the Discriminator/Sorter, which is then broadcast to all PC’s on the Network via UDP.

The Teller PC with the matching teller number logon will receive and “wedge” the count totals into the target application

This is a very simple, no hassle

“plug-n-play” install.

October 2010 13Back to Index

Improved!

CASH-IN “Print-to-Screen” EZ-WEDGECASH-IN “Print-to-Screen” EZ-WEDGE

No Software Required Increase Discriminator Sales

Immediately Provide the extra “advantage”

needed to close new sales Make your products stand-out

over all any competitor Win deals against local area

competition Bundle your next sale with the

CASH-IN EZ-Wedge

October 2010 14Back to Index

Connects from the CASH-IN USB port to a PC USB port

Connects the CASH-IN RS-232port to the SB-2000 9-pin D

Actual Size: 2"x2"x3/4"

Some Typical User ExamplesSome Typical User Examples

The following application screen views are representative of two different Teller applications, each configurable in three different ways. Typically, a Teller application will only use one primary method for currency count input.

However, TellerCounts is flexible enough to support up to five unique screen combination requirements all at the same time should the need arise.

October 2010 15

FiServ Vision - VIPFiServ Vision - VIP

October 2010 16Cash Count In

Piece Entries

FiServ Vision - VIPFiServ Vision - VIP

October 2010 17Cash Count

Value Entries

FiServ Vision - VIPFiServ Vision - VIP

October 2010 18LUMP SUM

LUMP SUMENTRY

EZ-TellerEZ-Teller32 32 Cash InCash In

October 2010 19

Piece EntriesIn a List

EZ-TellerEZ-Teller32 32 Cash CountCash Count

October 2010 20Value Entries

In a List

EZ-TellerEZ-Teller32 32

Lump SumLump Sum

October 2010 21

LUMP SUMENTRY