Pitched RoofingPocket Product Guide

Issue 22Telephone: 01327 701910 Fax: 01327 701919www.hambleside-danelaw.co.ukemail: sales@hambleside-danelaw.co.uk

Contents Introduction

02 Featured Product

Flashings

04 Dry fix valley troughs05 Open valley troughs Bonding Gutters 06 Bonding Gutters Conti-Soakers07 Individual dry soakers08 Individual dry soakers Continuous verges Interlocking dry verge

Ventilation

10 Tile roof vents Soil pipe adapters12 Slate roof vents 13 Slate roof vents Soil pipe adapters14 Ridge and hip system Soffit, fascia and eaves15 Soffit, fascia and eaves 17 Cavity and underfloor

Ancillary

20 Continuous eaves course Damp proof course Abutment cover flashing Hip trays Underlay lap vent 21 Underlay support trays Fast Flash

Who are we?

23 Other products 24 Additional support

Product contains recycled material

Hambleside Danelaw is the UK market leader for its flashing, ventilation and ancillary products. These comprehensive ranges cover everything needed on your roof from dry fix valley troughs to tile roof vents and even bat vents.

With over 40 years’ experience in the construction industry, we have unrivalled expertise when it comes to the development, manufacturing and distribution of our products.

We produce all of our products in our state of the art manufacturing facilities, here in the UK.

The environment is important to us and we are always striving to be an environmentally responsible manufacturer, working to reduce production waste and our carbon footprint through product innovation and sophisticated manufacturing processes.

00Flashing products |02 | Featured product

The self-adhesive flashing for any roof project

Fast Flash is an environmentally friendly, lead-free flashing that is simple to install on multiple applications and common roof coverings.

Features and benefits • Lead look-a-like

• 50% faster to install than lead

• Lighter in weight than lead

• No scrap value

• Fully adhesive

• No gluing required

• Minimal waste

• Reusable off-cuts

• Universal applications

Materials

Fast Flash is a composite consisting of an aluminum grid, embedded in an environmentally friendly polymer rubber.

The composite has great stretching ability and can be increased by 60% in length and 20% in width.

Dimensions

5 metre rolls and widths of either 280mm or 370mm.

Available colours

Comes in Traffic Grey (RAL 7043). For additional colours of Black (RAL 9011) or Tile Red (RAL 8004), please contact us.

Fast Flash is compatible with our soaker range which can be found on pages 07 and 08.

– your fast roof flashing...

Maintain a watertight roof with our range of quality roof flashings made from GRP (glass reinforced polyester). Ensure your valleys, verges and abutment roof junctions are durable and sound for years to come with our tried and tested range.

Flashings04 - 08

Wall abutments

Chimney perimeter

Dormer windows

Pipe flashings

Valley details

Valley details

NEW PRODUCT

Traffic Grey Black Tile Red

04 05| Flashing products Flashing products |

Dry Fix mortarless GRP valley trough creates close-cut appearance on new build and refurbishment. Suitable for all profiled tiles. Available in standard lead grey colour, this unique product cuts fixing time by up to 50%. Central upstand height: 105mmHDL DVT/1 x L3000mm Pack of 5HDL DVT/2 x L2400mm Pack of 5

GRP valley troughs with mortar bonding strip and mortar retention bar in standard lead grey colour. HDL 361 W380 x L3000mm Pack of 10HDL 362 W380 x L2400mm Pack of 10HDL 401 W410 x L3000mm Pack of 10HDL 402 W410 x L2400mm Pack of 10

Manufactured with a central upstand to suit slates, flat interlocking and plain tiles for joining dissimilar roof coverings. Central upstand height: 70mmW210 x L3000mm Pack of 5

For use in conjunction with Dry Fix valley troughs for tiles to provide support where small cuts of tiles occur. Pack of 5

Available as an alternative to the DVBP for clipping together small cuts of interlocking tiles when using Hambleside Danelaw Dry Fix valley troughs and all Dry Fix hip systems.

Pack of 100

Dry Fix mortarless GRP valley trough creates close-cut appearance on new build and refurbishment. Suitable for all flat and plain tile types. Available in standard lead grey colour, this unique product cuts fixing time by up to 50%. Central upstand height: 80mmHDL DVLPT/1 x L3000mm Pack of 5HDL DVLPT/2 x L2400mm Pack of 5

GRP valley troughs with mortar bonding strip, in standard lead grey colour.

HDL RP3 W380 x L3000mm Pack of 10HDL RP4 W380 x L2400mm Pack of 10

Dry Fix mortarless GRP valley trough creates close-cut appearance on new build and refurbishment. Available in standard lead grey colour, this unique product cuts fixing time by up to 50%. Central upstand height: 55mmHDL DVS/1 x L3000mm Pack of 5HDL DVS/2 x L2400mm Pack of 5

GRP valley trough in standard lead grey colour. HDL SVTU W360 x L3000mm Pack of 10HDL SVT W330 x L3000mm Pack of 10

A GRP slate valley trough for use on fully boarded roofs specially designed for the Scottish market. HDL SSVT W360 x L3000mm Pack of 10

Valley troughs Valley troughs

Bonding Gutters®

Dry fix Open

Accessories

HDL DVT PROFILED TILE ROOFS HDL 361/362 & TILE ROOFS

HDL DBG1 DRY FIX BONDING GUTTER

HDL 401/402

HDL DVBP SMALL CUT TILE SUPPORT BRIDGE

HDL DVC DRY VALLEY CLIP

HDL DVLPT FLAT AND PLAIN TILE ROOFS HDL RP3/RP4 TILE ROOFS

HDL DVS SLATE ROOFSHDL SVTU/SVT SLATE ROOFS

HDL SSVT SCOTTISH SLATE ROOFS

06 07| Flashing products Flashing products |

Manufactured with a central upstand to suit profiled tiles on one or both sides and also typical Scottish practice where there may be tiling battens on one side only. Central upstand height: 100mmW210 x L3000mm Pack of 5

A GRP profile for use when joining dissimilar roof coverings – e.g. slate to tile or two different tile types, complete with integral mortar bonding strip.

W225 x L3000mm Pack of 10

HDL DBG2 DRY FIX BONDING GUTTER

HDL BG TRADITIONAL BONDING GUTTER

A GRP continuous abutment soaker in standard lead grey colour with mortar bonding strip. Available lipped for fixing directly into the wall or unlipped for use with a separate lead or GRP cover flashing. Unlipped H140 x W170 x L3000mm Pack of 10Lipped H150 x W170 x L3000mm Pack of 10

A GRP continuous abutment soaker in standard lead grey colour. Available lipped for fixing directly into the wall or unlipped for use with a separate lead or GRP cover flashing. Unlipped H140 x W170 x L3000mm Pack of 10Lipped H150 x W170 x L3000mm Pack of 10

A GRP continuous abutment soaker in standard lead grey colour. Available for fixing directly to sark boards and unlipped for use with a separate lead or GRP cover flashing. H200 x W160 x L3000mm Pack of 10

Conti-SoakersTM

HDL CST TILE ROOFS

HDL CSS SLATE ROOFS

HDL SCSS SCOTTISH SLATE ROOFS

Lightweight polypropylene dry soaker suitable for use with Marley Modern type interlocking flat concrete tiles – left or right handed.

HD MDS H75 x W185 x L430mm Pack of 50

Lightweight polypropylene dry soaker suitable for use with Redland Richmond type tiles Not suitable for Redland Richmond 10 type tiles – left or right handed.

HD RRS H75 x W180 x L430mm Pack of 50

Lightweight polypropylene dry soaker suitable for use with Redland 10 and Russell Galloway type tiles – left or right handed.

HD RTS H75 x W175 x L410mm Pack of 50

Lightweight polypropylene dry soaker suitable for use with Marley Edgemere type tiles – left or right handed. HD SRRS H75 x W180 x L430mm Pack of 50

Lightweight polypropylene dry soaker for plain clay and concrete tiles – left or right handed.

HD PCS H75 x W100 x L170mm Pack of 50

Lightweight polypropylene dry soaker suitable for use with Forticrete Gemini/Minislate, Marley Ashmore and Redland Duo Plain type tiles – left or right handed.

HD DTS H105 x W145 x L240mm Pack of 50

Lightweight polypropylene dry soaker suitable for use with Redland Cambrian and Marley Melbourn type slates – left or right handed.

HD RCS H105 x W155 x L280mm Pack of 50

Individual dry soakersHD MDS INTERLOCKING TILES

HD RRS INTERLOCKING TILES

HD RTS INTERLOCKING TILES

HD SRRS INTERLOCKING TILES

HD PCS PLAIN TILES

HD DTS INTERLOCKING DUO TILES

HD RCS INTERLOCKING SLATES

00Flashing products |08 | Flashing products

Lightweight polypropylene dry soaker for use with 500 x 250mm and 600 x 300mm slates.

HD SS500 H85 x W100 x L300mm Pack of 50HD SS600 H85 x W100 x L380mm Pack of 50

HD SS500/600 SLATES

GRP dry fix verge in attractive slate grey colour. Under batten fixing, suitable for natural and man-made slates.

Slate gap 40mm Length 3000mm Pack of 10

Stylish design to prevent weather ingress and mortar degredation at the roof edge. With a market leading 355mm maximum batten gauge and clip over design for simple installation. Suitable for use on new build and refurbishment.

HD IDV/L/R Verge unit Pack of 50HD TIDV/L/R Thin leading edge unit Pack of 50HD IDV/AR Angle ridge cap Pack of 10HD IDV/HR Half round ridge cap Pack of 10HD IDV/ST Starter unit Pack of 10HD IDV/BC Batten end clip Pack of 50

GRP dry fix verge in attractive slate grey colour. For the Scottish practice, sark board or over-batten fixing, suitable for natural and man-made slates.

Slate gap 16mmLength 3000mm Pack of 10

GRP dry fix verge in attractive slate grey colour. Face fixing, suitable for natural and man-made slates.

Slate gap 55mmLength 3000mm Pack of 10

GRP dry fix verge in attractive slate grey colour. For the Scottish practice, face fixing, suitable for natural and man-made slates.

Slate gap 35mmLength 3000mm Pack of 10

Verge

Verge

Continuous for slate

Interlocking for tile

HDL DV6 SLATE ROOFS

HD IDV INTERLOCKING DRY VERGE SYSTEM

HDL DV7 SCOTTISH SLATE ROOFS

HDL DV8 SLATE ROOFS

HDL DV9 SCOTTISH SLATE ROOFS

There is a wide range of roofing and underfloor ventilation products to suit different applications and construction details, from new build to refurbishment.

For technical guidance on roof space ventilation, please contact our sales team.

Ventilation10 - 18

Available in Black, Brown, Slate Grey, Terracotta and Antique Red

10 11| Ventilation products Ventilation products |

Compatible with Marley Modern type, Redland Mini Stonewold type, Sandtoft Calderdale type, Redbank Bretton type, Quinn Western Slate MK 2 type and Lagan Flat type tiles. Made from polypropylene.

Actual ventilation area: 15,000mm2 Pack of 5

Tile vent compatible with most plain concrete and clay tile types. Made from polypropylene.

Actual ventilation area: 2,000mm2 Pack of 5 Fit 5 per metre to achieve 10,000mm² airflow

Minimum rafter pitch: 35°

Tile vent compatible with Marley Ludlow Plus type, Redland 49 type and Sandtoft Standard Pattern type tiles. Made from polypropylene.

Actual ventilation area: 10,000mm2 Pack of 5

Minimum rafter pitch: 22.5°

Tile vent compatible with Marley Anglia type, Redland Norfolk Pantile type and Sandtoft Shire type tiles. Made from polypropylene.

Actual ventilation area: 10,000mm2 Pack of 5

Minimum rafter pitch: 22.5°

Compatible with Marley Mendip type, Redland Grovebury type, Russell Pennine type and Quinn Locherne type tiles. Made from polypropylene.

Actual ventilation area: 15,000mm2 Pack of 5

Compatible with Marley Double Roman type, Redland Double Roman type, Russells Double Roman type, Sandtoft Double Roman type and Lagan Double Roll type tiles. Made from polypropylene.

Actual ventilation area: 15,000mm2 Pack of 5

Compatible with Marley Ludlow Major type and Russells Cheviot type tiles. Made from polypropylene.

Actual ventilation area: 15,000mm2 Pack of 5

Compatible with Redland Renown type tiles. Made from polypropylene. Made from polypropylene.

Actual ventilation area: 15,000mm2 Pack of 5

Connects standard 110mm pipework to all HD TV/15 series tile roof vents. May be used for soil ventilation or mechanical extraction.

HD TVSPA Complete kit Pack of 5HD TVA Adapter only Pack of 10

Actual ventilation area: 8,000mm2

Connects standard 110mm pipework to HD TV10/5 vents in pairs. Suitable for soil ventilation only.

HD PCSPA Complete kit Pack of 5HD PCA Adapter only Pack of 10

Actual ventilation area: 4,000mm2

Connects standard 110mm pipework to HD TV10/6 and HD TV10/8 vents. May be used for soil ventilation or mechanical extraction.

Actual ventilation area: 8,000mm2 Pack of 5

Flexi pipe can be used as an extension to all HDL Soil Pipe Adapter kits. Suitable for external fit to standard 110mm plastic pipes for soil ventilation and mechanical extraction.

Overall length: 510mm Pack of 12

Tile vents

HD TV15/1 TILE ROOF VENT

HD TV10/5 PLAIN TILE ROOF VENT

HD TV10/6 TILE ROOF VENT

HD TV10/8 TILE ROOF VENT

HD TV15/2 TILE ROOF VENT

HD TV15/3 TILE ROOF VENT

HD TV15/4 TILE ROOF VENT

HD TV15/7 TILE ROOF VENT

HD TVSPA SOIL PIPE ADAPTER KIT

HD PCSPA SOIL PIPE ADAPTER KIT

HD RSPA SOIL PIPE ADAPTER KIT

HD FPC FLEXI PIPE CONNECTOR

Minimum rafter pitch for all HD TV15 series vents: 17.5°All tile vents are available in Black, Brown, Slate Grey, Terracotta and Antique Red

12 13| Ventilation products Ventilation products |

Universal slate roof vent for man-made or natural slates. Not suitable for soil ventilation or mechanical extraction. Grey to order.

Size to suit either:600 x 300mm or500 x 250mm slates when trimmed.

Actual ventilation area: 5,000mm2 Pack of 10

Universal slate roof vent for man-made or natural slates. Suitable for soil ventilation or mechanical extraction.

Size to suit either:600 x 300mm or500 x 250mm slates when trimmed.

Actual ventilation area: 10,000mm2 Pack of 10

Slate roof vent for man-made or natural slates. Suitable for soil ventilation or mechanical extraction.

Size to suit:500 x 250mm slates

Actual ventilation area: 10,000mm2 Pack of 10

Flush fit slate roof vent for man-made or natural slates. Suitable for soil ventilation or mechanical extraction. Grey to order.

HD ILSRV10/20Base size 565 x 290mm to suit 500 x 250mm slatesHD ILSRV10/24Base size 615 x 300mm to suit 600 x 300mm slates

Actual ventilation area: 10,000mm2 Pack of 10

Flush fit slate roof vent with universal application. Suitable for soil ventilation or mechanical extraction. Grey to order.

Size to suit either:600 x 300mm or500 x 250mm or 450 x 230mm slates

Actual ventilation area: 10,000mm2 Pack of 5

Universal slate roof vent with large base for ‘random’ and diminishing course slate roofs. Can be trimmed to 600 x 300mm base size. Suitable for soil ventilation or mechanical extraction. Grey to order.

Size:680 x 450mm

Actual ventilation area: 20,000mm2 Pack of 5

Slate vents

HD SRV5U UNIVERSAL SLATE ROOF VENT

HD SRV10U UNIVERSAL SLATE ROOF VENT

HD SRV10/20 SLATE ROOF VENT

HD ILSRV10/20 FLUSH FIT SLATE ROOF VENT

HD ILSRV10/U UNIVERSAL FLUSH FIT SLATE ROOF VENT

HD SRV680 UNIVERSAL SLATE ROOF VENT

HD ILSRV10/24

Connects standard 110mm pipework to 10,000mm² vents. May be used for soil ventilation and mechanical extraction with HD SRV10U and HD SRV10/20 vents.

Actual ventilation area: 8,000mm2 Pack of 10

Connects standard 110mm pipework to 20,000mm² vent. May be used for soil ventilation and mechanical extraction with HD SRV680 vent.

Actual ventilation area: 8,000mm2 Pack of 5

Connects standard 110mm pipework to HD ILSRV10/20 & HD ILSRV10/24, including blanking plug. May be used for soil ventilation and mechanical extraction.

HD ILSPA Complete kit Pack of 5HD ILA Adapter only Pack of 10 Actual ventilation area: 8,000mm2

Connects standard 110mm pipework to the 10,000mm² HD ILSRV10/U vent. May be used for soil ventilation or mechanical extraction.

HD ILSPAU Complete kit Pack of 5HD ILAU Adapter only Pack of 10 Actual ventilation area: 8,000mm2

HD SPA SOIL PIPE ADAPTER KIT

HD SPA680 SOIL PIPE ADAPTER KIT

HD ILSPA SOIL PIPE ADAPTER KIT

HD ILSPAU SOIL PIPE ADAPTER KIT

Minimum rafter pitch to all slate vents: 22.5° or 25° depending on head lap. All of these vents are manufactured from black polypropylene and are suitable for batten or sark board fixing.

14 15| Ventilation products Ventilation products |

Unique and adaptable universal design to fit all commonly available ridge, tile and slate types. Ideally suited to cold and warm roofs and for batten space ventilation, this mechanically fixed system is compliant with the requirements of BS 5534 and BS 5250.

Actual ventilation per linear metre: 5,000mm2 (min) Available lengths: 6000mm and 3000mm

For refurbishment and new build details – unique universal design to suit openings for both 10mm and 25mm regulation requirements.

Airflow at 10mm fixing position: 10,000mm²Airflow at 25mm fixing position: 25,000mm² Length: 1000mm Width: 48mm 12m per pack

HD 6000: size to suit 600mm rafter centresUniversal panel vents for use over the insulation, positioned between rafter centres to ensure clear airway. Unique design enables use on either below 15° or above 15° roof pitch.

Actual airflow per panel: 16,000mm2

HD 4500: size to suit 450mm rafter centresActual airflow per panel: 12,000mm². HD 4000: size to suit 400mm rafter centresActual airflow per panel: 9,000mm².

HD 6050: size to suit 600mm rafter centresPanel vent for open eaves details with single row flyscreen, positioned between the rafters on roofs above 15° pitch.

Actual airflow per panel: 6,843mm2

HD 4550: size to suit 450mm rafter centresActual airflow per panel: 5,132mm². HD 4050: size to suit 400mm rafter centresActual airflow per panel: 4,474mm².

Easy to fix vent ideal for refurbishment projects. Black, White, Brown and Light Oak polypropylene. Airflow varies according to spacing.

Airflow per unit: 2,500mm²Airflow per metre at 250mm centres: 10,000mm² Hole size: 70mm Base diameter: 80mm Pack of 50

The corbel vent is designed to be incorporated above a continuous masonry corbel constructed of brick, stone or similar.

Actual ventilation per metre run: 10,000mm2 Length: 2400mm Width: 28mm Pack of 10

Continuous sloping eaves soffit vent. White or Brown PVC.

Actual ventilation per metre run: 10,000mm2 Length: 2400mm Width: 56mm Pack of 10

Continuous soffit vents to attach and support soffit boards between 4mm and 10mm thickness. White or Brown PVC.

Actual ventilation per metre run: 10,000mm2 Length: 2400mm Width: 51mm Pack of 10

For refurbishment and new build details to suit openings for 10mm regulation requirements.

Actual ventilation per metre run: 10,000mm2 Length: 1000mm Width: 33mm 25m per pack

Ridge and hip

Eaves and soffit vents

Eaves panel vents

Dry fix systemHD ROR & HD CON DRY FIX ROLLOUT RIDGE AND HIP

HD 12000U UNIVERSAL OVER FASCIA VENT

UNIVERSAL PANEL VENTS

PANEL VENTS | SINGLE ROW FLYSCREEN

HD 7000 CIRCULAR SOFFIT VENT

HD 8310 CORBEL VENT

HD 8210 SOFFIT VENT

HD 8000 SOFFIT VENT

HD 12000M OVER FASCIA VENT

Height: 36mm

Height: 16mm

Height: 42mm

Height: 8mm

Height: 22mm

Height: 19mm

The figures shown under each illustration confirms the suitability for 10mm and 25mm airflow requirements. All vents are manufactured from black PVC and come in packs of 50.

10mm & 25mm

10mm

16 17| Ventilation products Ventilation products |

HD 6025: size to suit 600mm rafter centresPanel vent for open eaves details with double row flyscreen, positioned between the rafters on roofs below 15° pitch.

Actual airflow per panel: 13,786mm2

HD 4525: size to suit 450mm rafter centresActual airflow per panel: 10,264mm². HD 4025: size to suit 400mm rafter centresActual airflow per panel: 8,948mm².

Suitable for use with rafters of any spacingA 397mm wide rafter tray specifically designed for retro installation into the eaves to ensure that insulation blockages of ventilating air do not occur. Rafter centres above 450mm are accommodated by joining panels and trimming to suit.

Conforms to 10mm and 25mm openings for airflow requirements.

Actual airflow per panel: 12,500mm2

Pack of 25

Universal roll panel vent with variable rafter centre capability - 6 metre lengths. Conforms to 10mm and 25mm openings for airflow requirements.

Actual airflow per metre: 25,000mm2

12m pack

PANEL VENTS | DOUBLE ROW FLYSCREEN

HD URT UNIVERSAL REFURB. TRAY VENT

HD 5000 UNIVERSAL ROLL PANEL VENT

25mm

HD 3025VP Comprising 1 x 6 metre roll panel vent, 10 x 600mm underlay support trays and 6 x 1m lengths of universal over fascia vent.

Airflow at 10mm fixing position: 10,000mm²Airflow at 25mm fixing position: 25,000mm² HD 3000VP Comprising 6 x 1m lengths of standard over fascia vent. All other components as HD 3025VP.

Actual airflow per metre: 10,000mm2

Ventilation packHD 3025VP UNIVERSAL OVER FASCIA VENTHD 3000VP

HD 9660M

For use where the external vent aperture is required to be at a higher level than the underfloor void. 3 - 5 course height adjustment.

Airflow per unit: in excess of 7,000mm² Pack of 10

Options Vermin Screen factory fitted internal Vermin Screen code: HD 9600B

Optional cavity tray designed to connect to the HD 9600M Screen code: HD 9600CT

A two course vertical extension sleeve for the HD 9600M. Can be used in multiples to achieve any desired height. Pack of 10

Designed to extend the reach of the underfloor vent for varying cavity and wall leaf widths. Top extension sleeve (HD 9660T) 140mm long for an outer leaf width up to 170mm, bottom extension sleeve (HD 9660M) 155mm long for an inner leaf width up to 215mm. Pack of 10

Designed to fit Telescopic Underfloor vent and connects to standard 110mm soil or drainage pipe.

Asymmetric design suitable for use immediately below pre-cast concrete floors. Pack of 10

Single brick vent with vertical interlock facility. Made from polypropylene in Terracotta, Buff, Black and Brown. Can be interlocked together for double and triple applications.

Airflow per unit: 7,000mm² Pack of 20

Factory fitted option to standard airbrick vent colours. Meets with BS 5440 requirements. Clip together facility to form 225 x 150mm and 225 x 225mm configurations.

Airflow per unit: 7,000mm² Pack of 20

Cavity and underfloor ventsHD 9600M TELESCOPIC UNDERFLOOR VENT

HD 9610/2 UNDERFLOOR VERTICAL EXT. SLEEVE

HD 9660T UNDERFLOOR HORIZONTAL EXT. SLEEVE

HD 9620 SQUARE TO ROUND ADAPTER

HD 9300 AIRBRICK VENT

HD 9300G GAS GRILLE BRICK VENT

00Flashing products |18 | Ventilation products

Semi rigid sleeve designed to ventilate through standard cavity walls. Made from black polypropylene.

Options Single airbrick size code: HD 9350/1

H61 x W217 x L280mm Pack of 10

Double airbrick size code: HD 9350/2

H134 x W217 x L280mm Pack of 5

Triple airbrick size code: HD 9350/3

H210 x W217 x L280mm Pack of 5

HD 9350/1/2/3 AIRBRICK VENT SLEEVE

Adjustable angle stop end complete with integral bonding strip for use with most popular steel lintels to prevent the discharge of water into the cavity. Black polypropylene. Pack of 50

For use in conjunction with cavity trays and lintels. Provides for cavity ventilation and moisture escape. Made from polypropylene in White, Black, Buff, Terracotta, Brown, Grey and Translucent. Suitable for traditional and timber frame build.

Actual ventilation per vent: 260mm2 Length: 100mm Pack of 50

Used to allow the release of moisture above lintels and cavity trays. Made from polypropylene in Buff, Terracotta and Translucent. Suitable for traditional and timber frame build. Length: 100mm Pack of 50

Perp weep extension clips to perp weep singularly or in multiples to accommodate different outer leaf constructions – e.g. render of different thicknesses. Made from polypropylene in Translucent.

Length: 30mm Pack of 20

HD 9800 LINTEL STOP END

HD 9500 UNIVERSAL WEEP VENT

HD 9100 PERP WEEP

HD 9200 PERP WEEP EXTENSION

Height: 68mm

Height: 70mm

Height: 70mm

Our ancillary products are designed to save time on site by utilising cost effective materials to reduce skills and tools required for installation. Check out the range as there are products for all aspects of the roof detailing.

Ancillary20 - 21

20 21| Ancillary products Ancillary products |

A GRP support eaves course replacing the first course of cut slates. For fast installation, offering savings in both time and materials. Suitable for all types and sizes of slates up to 600mm long.

W355 x L3000mm Pack of 10

A GRP damp proof course that incorporates a wide mortar bonding strip. Specifically developed for use on sloping parapet walls up to 240mm thick.

W310 x L2400mm Pack of 10

Provides full support and eaves protection for roof underlay at eaves level - in black PVCu for easy fixing. Combines to provide drip into guttering while clipping trays together offers universal rafter spacing. Hinged at fascia to prevent panel distortion on low pitches.

The support tray can be fixed with either the HD 12000M, HD 12000U or directly to the top of the fascia board

L600mm Pack of 50

An environmentally friendly, lead-free flashing that is simple to install on multiple applications and common roof coverings due to the fully self-adhesive reverse.

The lead look-a-like flashing is light in weight, requires no gluing and has minimal waste as off-cuts are reusable. Available in Anthracite (RAL 7043). For additional colours of Black (RAL 9011) or Tile Red (RAL 8004), please contact us.

Fast Flash is compatible with our soaker range which can be found on pages 07 and 08.

OptionsFAST FLASH 280W280 x L5000mm

Ideally suited for eaves refurbishment, but can also be used on new build, this rigid PVC unit provides an immediate and cost effective solution to situations where damage to the roof underlay or felt has occurred.

L1500mm Pack of 10

A continuous GRP cover flashing in standard lead grey colour as an attractive and cost effective alternative to lead for roof abutments.

Easily trimmed on site to suit application, whether it directly into brick, render or as a stepped finish.

H150 x W45 x L3000mm Pack of 10

Universal GRP hip trays designed to provide quick and easy alignment of hip tiles.

OptionsHDL HT165H150 x W496 x L1650mm Pack of 10HDL HT300H150 x W496 x L3000mm Pack of 10

Designed to fit between the overlaps in the roofing underlay below the tiles or slates to introduce ventilation openings.

The shallow and tapered design suits all commonly encountered rafter spacings and allows for easier fitting between the roofing felt or underlay where the overlaps are tight. Pack of 25

Ancillary productsHDL CECS CONTINUOUS EAVES COURSE FOR SLATES

HDL DPC DAMP PROOF COURSE

HD 3000 ROOFING UNDERLAY SUPPORT TRAY

FAST FLASH FLEXIBLE SELF-ADHESIVE FLASHING

HD RFST RIGID UNDERLAY SUPPORT TRAY

HDL UACF UNIVERSAL ABUTMENT COVER FLASHING

HDL HT165 HIP TRAYS

HD ULV UNDERLAY LAP VENT

HDL HT300

12 - 30%

FAST FLASH 370W370 x L5000mm

00 | Flashing products 23Who are we? |

We don’t just do Roofing and Ventilation products here at Hambleside Danelaw.

Our 40 years of expertise in the construction industry has also seen us develop Zenon, our low carbon GRP in plane rooflights and Dryseal, our GRP low pitch and flat roofing system.

Zenon Rooflights

Our low carbon Zenon in-plane, barrel vault and standing seam rooflights for the metal building envelope includes award winning Zenon Evolution rooflights and unique Insulator honeycomb core, increasing natural daylighting and thermal performance of industrial buildings.

Dryseal Flat Roofing System

Our Dryseal flat and low pitched roofing system is installed UK wide by our trained and approved network of contractors. The factory manufactured GRP component based system is unique and is backed up by an independent 20 year insured guarantee and ‘Zero Falls’ BBA certification.

Other products

The environment is something we seriously care about, our mission is to reduce the impact of our operations on the environment wherever we can. This covers our day to day activities such as warehousing and distribution, sales and administration as well as our manufacturing activities.

We also consider the environment when printing our literature, carefully choosing printers with fantastic green credentials. This brochure was printed by Seacourt Ltd.

Hambleside Danelaw is committed to the environment.

carbonneutral

renewableenergy

recycledFSC® stock

alcohol andsubstitute free

waterlessLED

VOC freeinks

Hambleside Danelaw manufactures premium GRP (glass reinforced polyester) and injection moulded roofing products in the UK. Known for our quality products and technical expertise, we have developed three core product groups over the last 40 years.

Who are we?23 - 24

00Flashing products |24 | Who are we?

Hambleside Danelaw reserve the right to amend specifications without prior notice. Full Terms and Conditions of Sale are available upon request.

Where to find everything

For more information on our product range or us as a company, please visit our website.

On here you can also find a range of technical documents, additional brochures and links to external sites such as Bimstore, Fastrack CAD and Barbour Product Search.

www.hambleside-danelaw.co.uk

Here at Hambleside Danelaw, we pride ourselves in excelling at customer service with fantastic internal and external sales teams.

We appreciate roofing can be a complex industry to get to grips with. For this reason we look to offer our support at every stage of the planning and installation for our customers.

Additional support

We believe that we are technical experts with unrivalled knowledge of our industry and the products used day to day by all.

We are able to provide comprehensive technical advice and support for on our product applications for both specifiers and clients. This support includes technical training, product selection advice and installation guidance including site visits where appropriate or required.

Much of the product range is covered by CAD support which provides technical details and drawings for our Roof Flashings and Ventilation, Dryseal and our wide range of Rooflight products.

We support the building professional in the specification process through:

• CAD drawings available from our website• BIM components• NBS Plus Specification data• Product technical support• Comprehensive UK sales representation

Hambleside Danelaw LimitedLong March, Daventry, Northamptonshire, NN11 4NR

Telephone: 01327 701910 Fax: 01327 701919www.hambleside-danelaw.co.ukemail: sales@hambleside-danelaw.co.uk

Market leading, original and unique roofing and ventilation products from Hambleside Danelaw

12 2016