Super Therm®

By: Mario Martinez

President

Pro Green Roof Systems and Construction, LLC

What is Super Therm® ?

Super Therm® is a thermal barrier ceramic coatingSuper Therm® is a ceramic based, water borne,

thermal barrier coating that is designed to block and reflect heat that decreases energy and maintenance cost. As the only ceramic coating developed in cooperation with NASA, Super Therm® is the most effective, durable, and long lasting ceramic coating on the market.

What makes Super Therm® unique?

Average Energy Savings

30%

Heat Sources from the SunTypes of heat Infrared

Visible LightUltraviolet

3%

57%40%

How much Infrared, Visible Light, and Ultraviolet heat does Super Therm® block?

Percentage of heat that is blocked by Super Therm®

Infrare

d

99.5%

Visible Light 92%

Ultraviolet 99%

Definitions• Solar Reflectivity - Amount of incoming solar energy a

material reflects (usually in a %)• Emissivity – Amount of energy a material emits due to its

own heat and temperature (usually in %)

Sun

Roof

Reflected Emitted

• Fear of glare• Super Therm® produces diffused reflections, not secular reflections

Roof

Secular

Diffuse

Nippon Paint Factory Roof Insulation

Residential Home in Little Rock, Arkansas

Heat Loss Captured by Infrared Camera AFTER Application of

Super Therm®

Heat Loss Captured by Infrared Camera BEFORE

Application of Super Therm®

Why is Super Therm® preferred over other products?

Super Therm® has a unique ceramic composition

• Blend of four different ceramics that block all windows of heat transfer.

• Other ceramic coatings only contain glass hollow spheres that reflect visual light when clean but absorb and transfer other windows of heat.

• Only ceramic coating rated as an insulator by BOCA (Us Building Code)

• Includes various resins, including urethanes for durability and longevity

Protection from the Elements

Rain Moisture Humidity

Reduces sound waves by 68%

Super Therm™

68% reduction

Super Therm® is rated as a true insulator by BOCA (US Building Code)

R19 equivalent rating

10 mils dry

Super Therm™ 6” – 8”

ASHRAE 90.1 Code ComplianceTESTING REQUIRED TO PROVE THE “R” VALUE

A. ASTM C 236-89 “ Standard Test Method for Steady-State Thermal Performance of Building Assemblies by Means of a Guarded Hot Box.”

B. ASTM 1269 “Differential Scanning Calorimeter”

ASTM E 1461-92 “Thermal Diffusivity.”

Super Therm® has a “U” ( Thermal Flow) Value of 0.052.

Super Therm® is (1/RE) = 0.052 Thermal Flow. ASHRAE 90.1 Compliance Varrience cannot exceed 0.061 for Thermal Flow.

Super Therm® falls within the ASHRAE 90.1 Compliance Rating and is acceptable.

Super Therm® has a Class A Fire Rating

Super Therm™

Super Therm® prevents mold and mildew

Super Therm® is USDA Approved

Super Therm® is a certified water barrier(ASTM D 7088, ASTM D 6904)

Super Therm™

Super Therm® is Environmentally friendly(24 grams of VOC)

Super Therm® has a very long life expectancy

Super Therm® has extraordinary e l a s t i c i t y

Passed ASTM E1737

Super Therm™

Where can Super Therm® be used?

Roof Insulation

Concrete Insulation

Walls Floors

Sound Proofing

Vending Machines Elevator Shafts

Air Conditioning & Ducting

AC Units AC Ducting

Companies that have used Super Therm®

Customers who have used Super Therm®

Nissan Motor Co. Ltd.Yokahama, Japan

200,000 sq. Meters

Before After

Chicago Bridge & Iron CompanyBeaumont, TexasBefore Super

Therm® Application Saw Tooth

Section Built 1937

After Super

Therm® Applicatio

n

187,000 Sq.Ft. of Metal and 82,000 Sq.Ft. of Tar & Gravel

Tucson International AirportSuper Therm® was applied toCentral PlantWest ConcourseEast ConcourseWash Bays

Note:A power wash and thorough

cleaning was performed on all roof tops prior to application

Tucson International Airport

August 2009 Savings = $22,144

Chris Wilt - Senior Director Facility Development

Circle K in Tucson (before Super Therm®)

Circle K in Tucson (after Super Therm®)

TRUMP INTERNATIONAL FT. LAUDERDALE, FL

Super Therm® was applied toConcrete ceiling of lobbyConcrete ceiling of parking

structure under air conditioned space

SANTA ROSA DUNES PENSACOLA, FL

Bel-Air Condos in Austin, TexasSPI iStucco™ System

Thermal Scan BEFORE iStucco™ System

Thermal Scan AFTER iStucco ™ System

iStucco System BEFORE

Ceramic iStucco Application

iStucco After Super Therm®

Frito Lay Trailer, KY Trailer

Irvington Elementary School, KY

Apartent Buildings And HotelIn Munich Germany

Residential HomeLas Vegas, Nevada

Testing, Certification and Endorsements of Super Therm

ENERGY STAR Program

Approved and accepted with Energy Star for energy savingsASTM E 903-96 Reflectivity = 80%Only 1% reduction in reflectivity over 3 years (3% over 10 years

ASTM TestingB 117/D 1654 450 Hour Salt Spray (Fog) – PassedC 177 thermal conductivity testing – PassedC 236 (C236-89(1993)el) – Passed, our performed

fiberglass by 148%.Standard Test Method for Steady-State Thermal

Performance of Building Assemblies by means of Guarded Hot Box. Testing for measuring R-values.

C 411 High – Temperature Surface Performance – PassedD 412 Tensile strength – Passed

.041 thickness = 13,248 psi

ASTM Testing Continued…..D 522 – Passed

Resistance to cracking on metal or rubber type materials. 1” (25mm)bend. ¼”(96mm)bend

D 1653 Water Vapor Permeability – PassedD 1654 Salt spray (fog/weathering) – Passed – 2000 hoursD 3273-82T D 3274 – Passed

Resistance to fungal growth or soil and dirt accumulation on paint film. Excellent (8 out of 9)

D 4060 Abrasion Resistance – PassedE 84 Flame Spread / Smoke Developed – Passed

Class “A” Rating (or Class “1” or Class “I”)

ASTM Testing Continued…..

E84-89a Flame spread / Smoke Developed – Passed – “0” developmentFlame Index “0”. Smoke Index “0”

E96 water vapor transmission – Passed – less than .01E 96 water vapor transmission – Passed – less than .01E 903-96 Reflectance – PassedE 119 Structural Steel Fire curve – Passed – 25 minutesE 1269 Thermal penetration through a substrate by differential

scanning calorimeter – Passed – blocking 99% of heat BTU conduction – TPRL

ASTM Testing Continued…..E 1461-92 Laser flash technique conductivity

diffusivity – PassedVTEC Laboratories review of test results – Letter

stating RE19TPRL lab test results show a bare metal plate

allowing 367.20 BTU heat conduction. SUPER THERM® coated on metal plate allowed only 3.99 BTU heat gain. A 99% reduction in heat transfer after applying only one coat of SUPER THERM ® on test plate.

G53 exposure to UV, elevated temperature and humidity - Passed

ICC Approval (International Code Council) 0104

Passed – ID #21-25Council that formally consolidates approvals for BOCA (Building Officials Code Administrators)

Section 723.2 Exposed installations, Thermal insulation

Section 723.3 Concealed installations, Thermal insulation

Section 803.2 Classification, Interior finish1998 International Mechanical Code

Section 604.3 Coverings and Linings, Insulation

ICBO (International Conference of Building Officials)

Passed ASTM E 84 For Flame SpreadPassed ASTM C 411 for High Temperature for

Surface PerformancePassed ASTM C 177 for Thermal Conductivity

(*SUPER THERM Specific)

NASA Testing

NHB 8060.1B/C Test 1 Flammability testing – Passed

“0” Burn, Class “A” rating – PassedNHB 8060.1C, Test 7 Toxic Off gassing –

Passed“K” no Toxic off gassing – Passed“K” Rating for toxicity – PassedTests performed at Marshall Space Flight

Center

Key EndorsementsUSDAPassed

Environmentally safe and safe for use around animalsApproved for incidental food contactLetter of Written Certification as Accepted by USDA from

Manufacturer

Underwriters Laboratory Inc. Approved

Factory Mutual Approval Passed - E - 108 Flame Spread over pitched roofing Tested and Approved for Roofing and all other Applications

California Cool Roof Program California Building Energy Efficiency Standards

Florida Cool Roof Rebate Program State approval for energy rebate

Pro Green Contact Information

Mario Martinez – (505) 780-1756 Dale Hatch – (480) 225-6835

mario@progreenroofcoatings.com dale@progreenroofcoatings.com

Andre Bluth – (623) 695-2406 Jason McDonald – (615) 878-4357

andre@progreenroofcoatings.com jason@progreenroofcoatings.com

Mark Cordova – (602) 510-0739 Luis Villalobos – (915) 329-5660

markc@progreenroofcoatings.com luisv@progreenroofcoatings.com