Briquette Press Manufacturing

-A Complete Manufacturing Process

Introduction• Briquetting is the process of transformation of

biomass waste to produce homogenous, uniformly sized solid pieces of high bulk density which can be directly used as a fuel.

• Biomass briquetting is the densification of loose biomass material to produce compact solid composites of fixed sizes with the application of high pressure.

Process Overview

• The complete process that takes place in the biomass briquetting plants is as shown in following diagram:

Manufacturing Process• The briquetting plant manufacturing process is

carried out at approximately 220°C temperature and with high pressure.

• The major raw materials needed for making briquettes are, rice husk, saw dust, wood, cotton stalk, coffee husk,groundnut shells, etc.

• The moisture content in these raw materials not more than 8-12 %.

Continue…

• If the materials having more than that of moisture, it would be first dried out in the dryer machine.

• The size of the raw materials should not be more than 3-5 mm that is valid for the briquette machine.

• Hence, the hammer mill is used to make the materials size equivalent to the briquette press.

Jumbo 90 Briquette Machine

• Jumbo 90 is briquetting machine with superb quality and high capability of producing well shaped briquettes.

• This machine produces biomass briquettes with maximum speed and minimum power and labor requirements.

Continue…

• Jumbo 90 briquette machine is made up with the latest technology which turns the wastage into the briquettes.

• Another Briquetting machine with superb quality is a Super 70 Briquetting machine that specially designed for medium level industries.

• After cooling, the complete biomass briquettes are produced with minimum efforts.

Continue…

• The briquette manufacturing process is done without any binder.

• The briquetting plant manufacturing is the eco-friendly and cost-effective process.

• Nowadays, briquettes are mostly used fuel in many industries for firing and heating purpose. Hence, this project is considered as the future plant of renewable energy.

“Make Money Through Green Technology”

RADHE INDUSTRIAL CORPORATION

Gondal Road, B/H Perfect auto service Survey No. 43,Plotno.122/123,

VAVDI, RAJKOT (GUJARAT) [INDIA] Toll free: 1800-300-21222

Visit Us: www.radhebriquettingplant.com