Languages
Pages
Legal
Explore all categories to find your favorite topic
Vol. 122 2012 ACTA PHYSICA POLONICA A No. 3 Proceedings of the 12th International Symposium on Physics of Materials, Prague, September 4�8, 2011 Correlation between MicrostructureFracture…
SmartFlex® Wire “100% quality controlled Shape Memory Wire for microactuators” General Features £ The smallest powerful electrical actuator £ Direct linear or angular…
Tadeusz Z. Woźniak Kazimierz Wielki University, Institute of Technology, Section of Materials Engineering, Bydgoszcz, Poland AUSTENITE DOUBLE DECOMPOSITION INTO BAINITE…
CALORIMETRIC STUDY W. C. OF THE AUSTENITE HAGELf, G. M. POUND:, : PEARLITE and R. F. TRANSFORMATION* MEHLt$ A high temperature, continuously recording, constant heat-flow…
ISIJ International, Vol. 42 (2002), No. 4, pp. 325–337 Review Decomposition of Austenite in Austenitic Stainless Steels A. F. PADILHA and P. R. RIOS1) Universidade de São…
8/10/2019 Challenges of Prior Austenite Grain Size-latrobe 1/39Forging the Future in High Performance MaterialsChallenges of Prior Austenite Grain SizeDetermination in Vacuum-melted…
7/31/2019 Characteristics and Effects of Austenite Resulting From 1/12Characteristics and effects of austenite resulting fromtempering of 13CrNiMo martensitic steel weld…
01-A.F.Padiha-4.121. Introduction Austenitic stainless steels were invented in Essen, Germany, in the beginning of the 20th century.1) Their con- tinuing development has
Strain Path Effect on Austenite Transformation and Ductility in TBF 1180 SteelAll Theses and Dissertations 2019-03-01 Strain Path Effect on Austenite Transformation and Ductility
Article Novel Mechanical Characterization of Austenite and Ferrite Phases within Duplex Stainless Steel Hossein Besharatloo 1,2, Marcel Carpio 3, José-María
FUNDAMENTAL STUDY OF THE AUSTENITE FORMATION AND DECOMPOSITION IN LOW-Si, Al ADDED TRIP STEELSFUNDAMENTAL STUDY OF THE AUSTENITE FORMATION AND DECOMPOSITION IN LOW-Si, Al
Characterization of Austenite Decomposition in Steels with Different Chemical Concepts and High Potential to Manufacture Seamed Pipes for Oil and Gas Industry Rogério
Formation conditions of coarse columnar austenite grain structure in peritectic carbon steels by the discontinuous grain growth mechanismTitle Formation conditions of coarse
ICALEO #P505Paper # P505 Tshidiso Seleka1, Sisa Pityana1, Marie Ulbrich2, Lipson Rampedi1 1 CSIR-National Laser Centre, P O Box 395, Pretoria, 0001, South Africa 2Vaal University
© 2014 ISIJ 222 ISIJ International, Vol. 54 (2014), No. 1, pp. 222–226 Refinement of Retained Austenite in Super-bainitic Steel by a Deep Cryogenic Treatment Feng HU,1)…
Slide 1 Summary of Martensite Formation Simulations June 27, 2012 Slide 2 Simulation Setup 1: Uniaxial Compression Simulations performed with large box: 22 x 22 x 11 nm (432,000…
ISIJ Int. 61(1): 434-441 (2021)© 2021 ISIJ 434 ISIJ International, Vol. 61 (2021), No. 1, pp. 434–441 https://doi.org/10.2355/isijinternational.ISIJINT-2020-327
The Effects of Martensite Content on the Mechanical Properties of Quenched and Tempered 0.2%C-Ni-Cr-Mo Steels John M. Tartaglia (Submitted February 13, 2009; in revised form
Deformation induced martensite in AISI 316 stainless steelN. Solomon* and I. Solomon** Abstract The forming process leads to a considerable differentiation of the strain
Microstructure effect on hydrogen-induced cracking in TM210 maraging steel Gang Wang a Yu Yan a Jinxu Li an Jingyu Huang b Lijie Qiao a Alex A Volinsky ac a Corrosion and…