Tusk Pillion Rack: Honda Africa Twin
Part#1767550001
Thanks for your purchase of the Tusk Top Rack.
This rack is made to handle extreme adventure riding, but works
great for the commuter as well. Please take note of the information
and instructions below to get the most out of your Tusk top rack.
Rack Hardware
4-M8 x 1.25 x 25mm Socket Head Bolt
1-Front Mounting Bracket
1-Rear Mounting Bracket
Assembly: Before you throw any packaging away, make sure you received all the necessary hardware:
Rack installation
1. Using your ignition key remove your front seat from your bike and set aside. Using a
10mm socket or wrench remove your rear seat and set aside, your rear seat will not
be reused in this installation. See image #1
2. Using the OEM hardware install the front and rear supplied Tusk aluminum brackets
and tighten. See Image #1.
Hardware
Image #1
Rear Bracket
Front Bracket
Rear Bracket
Front Bracket
Tusk Pillion Rack: Honda Africa Twin
Part#1767550001
Rack installation
3. Place your Tusk Pillion Rack over the mounting brackets and insert the four supplied M8 x 25mm
screws and loosely tighten. Thread lock is recommended. See image #2
4. Adjust for optimal fit and tighten.
5. Store your passenger seat in a safe place for future use.
Four M8 Bolts
Image #2
Top Related