Tusk Pillion Rack: Honda Africa Twin

Part#1767550001

Thanks for your purchase of the Tusk Top Rack.

This rack is made to handle extreme adventure riding, but works

great for the commuter as well. Please take note of the information

and instructions below to get the most out of your Tusk top rack.

Rack Hardware

4-M8 x 1.25 x 25mm Socket Head Bolt

1-Front Mounting Bracket

1-Rear Mounting Bracket

Assembly: Before you throw any packaging away, make sure you received all the necessary hardware:

Rack installation

1. Using your ignition key remove your front seat from your bike and set aside. Using a

10mm socket or wrench remove your rear seat and set aside, your rear seat will not

be reused in this installation. See image #1

2. Using the OEM hardware install the front and rear supplied Tusk aluminum brackets

and tighten. See Image #1.

Hardware

Image #1

Rear Bracket

Front Bracket

Rear Bracket

Front Bracket

Tusk Pillion Rack: Honda Africa Twin

Part#1767550001

Rack installation

3. Place your Tusk Pillion Rack over the mounting brackets and insert the four supplied M8 x 25mm

screws and loosely tighten. Thread lock is recommended. See image #2

4. Adjust for optimal fit and tighten.

5. Store your passenger seat in a safe place for future use.

Four M8 Bolts

Image #2