Third Party Load Testing AceClamp Products
Linear Testing per T-0101 Rev (A) (Parallel to the Roof Panel Seam)
Request a free product sample or place an order by calling 860-351-0686.
PG | 20
87 Spring Lane | Plainville, CT 06062
To order: 860-351-0686www.AceClamp.com
PG 1 OF 2
Vertical Testing per T-0101 Rev (A) (Perpendicular to the Roof Panel Seam)
a product of
Request a free product sample or place an order by calling 860-351-0686.
PG | 20
87 Spring Lane | Plainville, CT 06062
To order: 860-351-0686www.AceClamp.com
a product of
Third Party Load Testing AceClamp Products
Linear Testing per T-0101 Rev (A) - Snow Rails (Tested brackets and clamps on two parallel SSMR ribs)
The purpose of this test is to determine “force-to-lift” rail at increasing bolt torque specs.
PG 2 OF 2V021519
*AL and CU panel failures due to seam separation or panel pulling over screws fastening to plywood deck. AceClamps still intact.
* Screws securing panel to plywood pulled out during test. AceClamp still attached to the seam. Test data 12/11/18.
Vertical Testing per T-0101 Rev (A) Continued (Perpendicular to the Roof Panel Seam)
Top Related