Third Party Load Testing AceClamp ProductsThird Party Load Testing AceClamp Products Linear Testing...
Transcript of Third Party Load Testing AceClamp ProductsThird Party Load Testing AceClamp Products Linear Testing...
Third Party Load Testing AceClamp Products
Linear Testing per T-0101 Rev (A) (Parallel to the Roof Panel Seam)
Request a free product sample or place an order by calling 860-351-0686.
PG | 20
87 Spring Lane | Plainville, CT 06062
To order: 860-351-0686www.AceClamp.com
PG 1 OF 2
Vertical Testing per T-0101 Rev (A) (Perpendicular to the Roof Panel Seam)
a product of
Request a free product sample or place an order by calling 860-351-0686.
PG | 20
87 Spring Lane | Plainville, CT 06062
To order: 860-351-0686www.AceClamp.com
a product of
Third Party Load Testing AceClamp Products
Linear Testing per T-0101 Rev (A) - Snow Rails (Tested brackets and clamps on two parallel SSMR ribs)
The purpose of this test is to determine “force-to-lift” rail at increasing bolt torque specs.
PG 2 OF 2V021519
*AL and CU panel failures due to seam separation or panel pulling over screws fastening to plywood deck. AceClamps still intact.
* Screws securing panel to plywood pulled out during test. AceClamp still attached to the seam. Test data 12/11/18.
Vertical Testing per T-0101 Rev (A) Continued (Perpendicular to the Roof Panel Seam)