Mechanical Engineering
Chemical Engineering
Architecture
Applied Mechanics
5 more...
1 more...
2 more...2 more...
5 more...
Computer Science and Engineering
Nanotechnology« International Journal of Solid State Materials« International Journal of Optical Sciences
Physics
Civil Engineering
Electrical Engineering
Material Sciences and Engineering
Chemistry
5 more...4 more...
3 more...
Biotechnology
3 more...
Nursing « International Journal of Immunological Nursing« International Journal of Cardiovascular Nursing« International Journal of Neurological Nursing« International Journal of Orthopedic Nursing« International Journal of Oncological Nursing
5 more... 4 more...
Subm
it
Your
Article 2
017
International Journal of
Structural Engineering
& AnalysisIJSEAJul–Dec 2016
www.journalspub.com
International Journals Publisher
JournalsPub is a multi-disciplinary international journal boosting innovative & eminence research work
by Division of Dhruv Infosystems Pvt. Ltd. Launched in 2014 under the support and guidance by our
Honorable Editorial Board Members from renowned institutes.
Objectives of JournalsPub
JournalsPub is international scholarly journal that publishes peer reviewed journal in the frontier areas of
Applied Sciences, Medical and Engineering.
JournalsPub publishes Original Research Papers, Review Papers, Popular Articles, Short
Communications & Case Study.
Publishing special issues on Proceedings of Conferences, Seminars and Symposia.
JournalsPub Publishes issues twice a year (bi-annually) in English-language which is available online
(open access) and in printed version with a goal to promote an extensive academic awareness.
JournalsPub desires to set a good benchmark in the publishing industry by launching more than 100+
new International Journals to help the scientific community to enhance communication within the
research communities and maintain a balance between the existing and emerging interdisciplinary
technologies.
JournalsPub aims to provide quality research articles for Academic Researchers, Industrial
Professionals, Engineers, Scientists, Professors, etc. working in the areas of Applied Sciences, Medical
and Engineering to contribute and communicate innovative work.
Salient Features
An umbrella of 100+ journals that covers Applied Sciences, Medial and Engineering Arena.
The first and one of the rapidly emerging publication website in Country as well as overseas for its
excellence and exposure.
Universal transmission and reflectivity.
A Rigorous, Fast and Constructive Peer Review Process
Speedy Publication of Manuscripts
Eminent Editorial Board Members from renowned organizations.
Free Registration, Online Submission, Processing, Publication & Online Access of Manuscripts.
The journal publishes novel research articles with emphasis on theoretical and experimental work.
International Journal of
Structural
Engineering and Analysis
JournalsPub (Division of Dhruv Infosystems Private Ltd.) having its Marketing office located at Office No. 4, First Floor,
CSC pocket E Market, Mayur Vihar Phase II, New Delhi-110091, India is the Publisher of Journals. Statements and
opinions expressed in the Journal reflect the views of the Author(s) and are not the opinion of JournalsPub unless so stated.
Subscription Information and Order
Cost of Journal
National Subscription
Rs. 3000/- per Journal (includes 2 print issues), Single Issue copy purchase Rs.1800/copy
International Subscription
Online Only- $99, Print Only-$149 (includes 2 print issues)
Online + Print-$199 (includes 2 print issues + online access of published back volumes )
To purchase print compilation of back issues please send your query at [email protected]
Subscription must be prepaid. Rates outside the India include speed delivery charges. Prices subject to change without
notice.
Mode of Payment: At par cheque, Demand draft, and RTGS (payment to be made in favor of Dhruv Infosystems Pvt. ltd.,
payable at Delhi/New Delhi.
Online Access Policy
A). For Authors:
In order to provide maximum citation and wide publicity to the authors work, JournalsPub also have Open Access Policy;
Authors who would like to get their work open access can opt for Optional Open Access publication at nominal cost as
follows:
India, SARC and African Countries: INR 1500 including single hard copy of Author's Journal.
Other Countries: USD 200 including single hard copy of Author's Journal.
B.) For Subscribers:
Online access will be activated within 72 hours of receipt of the payment (working days), subject to receipt of correct
information on user details/Static IP address of the subscriber.
The access will be blocked:
If the user requests for the same and furnishes valid reasons for blocking due to technical issue. Misuse of the access rights
as per the access policy.
Advertising and Commercial Reprint Inquiries: JournalsPub with wide circulation and visibility offer an excellent media
for showcasing/promotion of your products/services and the events-namely, Conferences, Symposia/Seminars etc. These
journals have very high potential to deliver the message across the targeted audience regularly with each published issue.
The advertisements on bulk subscriptions, gift subscriptions or reprint purchases for distribution etc. are also very
welcome.
Lost Issue Claims: Please note the following when applying for lost or missing issues:
Claims for print copies lost will be honored only after 45 days of the dispatch date and before publication of the next issue
as per the frequency.
Tracking id for the speed post will be provided to all our subscribers and the claims for the missing Journals will be
entertained only with the proofs which will be verified at both the ends.
Claims filed due to insufficient (or no notice) of change of address will not be honored.
Change of Address of Dispatch should be intimated to JournalsPub at least 2 months prior to the dispatch schedule as per
the frequency by mentioning subscriber ID and the subscription ID.
Refund requests will not be entertained.
Legal Disputes
All the legal disputes are subjected to Delhi Jurisdiction only.
If you have any questions, please contact the Publication Management Team:
[email protected]; Tel: +91 0120-4347644.
International Journal of Structural
Engineering and Analysis
International Journal of Structural Engineering and Analysis provide a rapid forum for publication of
research article and comprehensive reviews that focuses on the structural engineering and recent
technological advancement that can be of great importance to the scientific community.
Focus and Scope of the Journal Analytical and design methods
Dams, bridges, buildings and special structures
Retaining structures and walls
Innovations in design and new technologies
Performance of structures
Repairs, strengthening, and maintenance
Structural fracture mechanics
Stability engineering
Soil-structure interaction
Mechanical structures
Standards and codes of practice
Structural and solid mechanics
Experimental studies and testing technologies
International Journal of Structural Engineering and Analysis is published twice a year (bi-annual by
JournalsPub- an imprint of Dhruv Infosystems Pvt. Ltd. The outlooks stated in the articles do not essentially
reflect of the publisher. The publisher does not endorse the quality or value of the advertised/sponsored
products described therein. Please consult full prescribing information before issuing a prescription for any
products mentioned in this publication.
No part of this publication may be reproduced, stored in retrieval or transmitted in any form without written
permission to the publisher.
To cite any of the material contained in this journal, in English or translation, please use the full English
reference at the beginning of each article. To reuse any of the material, please contact JournalsPub
PUBLICATION MANAGEMENT TEAM
INTERNAL MEMBERS
Associate Manager
ChairmanMr. Puneet Mehrotra
Managing Director,JournalsPub,
New Delhi
Hidam Renubala
Ankita Singh
Deepika Bhadauria
Rekha Rani
Commissioning Editors
Dr. Chhavi Goel
Manisha Dhoble
EDITORIAL BOARD MEMBERS
Hasan DilbasYildiz Technical University, Turkey
Dr. Govardhan BhattNational Institute of Technology Raipur, India
Dr. Ramani Bai VaradharajanIndian Institute of Technology, Madras, India.,
Malaysia
Dr. Saleem Muhammad SaleemDepartment of Basic Engineering, College of
Engineering, University of Dammam, Kingdom of Saudi Arabia, Saudi Arabia
Tim TseDepartment of Civil and Environmental
Engineering, Hong Kong University of Science and Technology, China
Dr. P. Ratish KumarAssociate Professor, Department of Civil
Engineering, N.I.T Warangal, India
Anil Kumar SachanCivil Engineering Department, MNNIT
Allahabad, India
Dr. J. KarthikeyanCivil Engineering Department, National
Institute of Technology, Tiruchirapalli, Tamil Nadu, India
Dr. Samer Al MartiniDepartment of Civil Engineering, College of
Engineering and Computer Science Abu Dhabi University, United Arab Emirates
AFM Saiful AminDepartment of Civil Engineering, Bangladesh
University of Engineering and Technology, Dhaka, Bangladesh
Shalem ErnestNational Institute of Technology Raipur, India
Hitesh SharmaN.I.T Raipur, India
Dr. Tarun Kumar Lohani Professor & Head, Civil Engineering, Orissa
Engineering College, Bhubaneswar, India
Dr. G. Nandini Devi Professor, Adhiyamaan College of Engineering,
Hosur, Tamil-Nadu, India
Batool Abd Al-elah Aziz College of Engineering, Department of Civil
Engineering, University of Baghdad, Iraq
Dr. Turgut Kocaturk Yıldız Technical University,Civil
Engineering,Istanbul
Saurabh Prakashrao Nirkhe P.E.S. College of Engineering, Aurangabad. Dr. Babasaheb Ambedkar Marathwada University,
Auranagabad, India
Ali M. Gharavimajdi Professor, Civil Engineering; Amirkabir university of Technology, Tehran, Iran
Sagar Mandya Shankar Visvesvaraya Technological University, mandya,
India
Assoc. Prof. Mesut SimsekYıldız Technical University Civil Engineering
Department Davutpasa Campus Esenler – Istanbul
From the Editor's Desk
Dear Readers,
We would like to present, with great pleasure, the inaugural volume of a new scholarly
journal, International Journal of Structural Engineering and Analysis. This journal is part
of the Engineering Sciences, and is devoted to the scope of present Structural Engineering
and Analysis issues, from theoretical aspects to application-dependent studies and the
validation of emerging technologies.
This new journal was planned and established to represent the growing needs of Structural Engineering and
Analysis as an emerging and increasingly vital field, now widely recognized as an integral part of scientific
and technical investigations. Its mission is to become a voice of the Civil Engineers community, addressing
researchers and practitioners in this area.
The core vision of International Journal of Structural Engineering and Analysis in Journals Pub is to
propagate novel awareness and know-how for the profit of mankind ranging from the academic and
professional research societies to industry practitioners in a range of topics in Structural Engineering and
Analysis in general. Journals Pub acts as a pathfinder for the scientific community to published their papers
at excellently, well-time & successfully.
International Journal of Structural Engineering and Analysis focuses on original high-quality research in
the realm of Analytical and design methods, Dams, bridges, buildings and special structures, Retaining
structures and walls, Innovations in design and new technologies, Performance of structures, Repairs,
strengthening, and maintenance.
The Journal is intended as a forum for practitioners and researchers to share the techniques of Structural
Engineering and Analysis and solutions in the area.
Many scientists and researchers have contributed to the creation and the success of the Structural
Engineering and Analysis community. We are very thankful to everybody within that community who
supported the idea of creating an innovative platform. We are certain that this issue will be followed by many
others, reporting new developments in the field of Structural Engineering and Analysis.
This issue would not have been possible without the great support of the Editorial Board members, and we
would like to express our sincere thanks to all of them. We would also like to express our gratitude to the
editorial staff of JournalsPub, who supported us at every stage of the project.
It is our hope that this fine collection of articles will be a valuable resource for Structural Engineering and
Analysis readers and will stimulate further research into the vibrant area of Structural Engineering and
Analysis.
Puneet Mehrotra
Managing Director
1. Seismic Behavior of Soft Storey Building With Static and Dynamic Earthquake Loading S.P. Nirkhe, A.G. Dahake, V.R. Upadhye 1
2. Flexural Analysis of Thick Beam Subjected to Sine Load Using Refined Shear Deformation Theory P.M. Pankade, D.H. Tupe, G.R. Gandhe 8
3. Assessment of the Factors Influencing Facility Maintenance Problems in Rufus Giwa Polytechnic, Owo, NigeriaAdeola Taiwo Olusola, Akinola Olanike Oluwatosin, Oladoja Ismaila Olawale 20
4. Review Insight: Repetitive Corrugation and Straightening to Produce Nanograin ParticlesShashank Jain 29
5. Current Trends and Future Prospects in Development of Tall BuildingsAnirudh Mathur 32
Contents
IJSEA (2016) 1–7 © JournalsPub 2016. All Rights Reserved Page 1
International Journal of Structural Engineering and Analysis Vol. 2: Issue 2
www.journalspub.com
Seismic Behavior of Soft Storey Building With Static and
Dynamic Earthquake Loading
S.P. Nirkhe1*, A.G. Dahake, V.R. Upadhye2 1Department of Civil Engineering, Deogiri Institute of Engineering AND Management Studies, Aurangabad,
Maharashtra, India 2Department of Civil Engineering, Marathwada Institute of Technology, Aurangabad, Maharashtra, India
ABSTRACT
Soft storey building played an important role in development of multistoried buildings in India. Functional and Social need to provide car parking space at ground level and for offices open stories at different level of structure far out-weighs the warning against such buildings from engineering community. With the availability of fast computers, so that software usage in civil engineering has greatly reduced the complexities of different aspects in the analysis and design of projects. In this paper an investigation has been made to study the seismic behavior of soft storey building with different arrangement in soft storey building when subjected to static and dynamic earthquake loading. It is observed that, providing infill improves resistant behavior of the structure when compared to soft storey provided.
Keywords: seismic loads, soft storey, static and dynamic analysis INTRODUCTION Open storey building provides facility for car parking in highly populated areas. Hence the trend has been to utilize the ground storey of the building itself for parking or reception lobbies in the first storey. These types of buildings having no infill masonry walls in ground storey, but all upper storey’s unfilled in masonry walls are called “soft first storey or open ground storey building.” Experience of different nations with the poor and devastating performance of such buildings during earthquakes always seriously discouraged construction of such a building with a soft ground floor. This storey is known as weak storey, because this storey stiffness is lower compare to above storey. So that easily collapses by earthquake. Due to wrong construction practices and ignorance for earthquake resistant design of buildings in our country, most of the existing buildings are
vulnerable to future earthquakes. So, prime importance to be given for the earthquake resistant design. The Indian seismic code IS 1893 (Part1): 2002 classifies a soft storey as “one in which the lateral stiffness is less than 70 percent of that in the storey above or less than 80 percent of the average lateral stiffness of the three storey’s above.
Objectives and Scope
Stability of earth is always disturbed due to internal forces and as a result of such disturbance, vibrations or jerks in ear this crust takes place, which is known as an earthquake. Earthquake produces low–high waves which vibrate the base of structure in various manners and directions, so that lateral force is developed on structure. In such buildings, the stiffness of the lateral load resisting
IJSEA (2016) 8-19 © JournalsPub 2016. All Rights Reserved Page 8
International Journal of Structural Engineering and Analysis Vol. 2: Issue 2
www.journalspub.com
Flexural Analysis of Thick Beam Subjected to Sine Load Using
Refined Shear Deformation Theory
P.M. Pankade*, D.H. Tupe, G.R. Gandhe Department of Civil Engineering, Deogiri Institute of Engineering and Management Studies, Dr. BAMU
University, Aurangabad, Maharashtra, India
ABSTRACT A Hyperbolic Shear Deformation Theory (HPSDT) taking into account transverse shear deformation effects is used for the static flexure analysis of thick isotropic beams. The displacement field of the theory contains two variables. The hyperbolic sine and cosine function is used in the displacement field in terms of thickness coordinate to represent shear deformation. The transverse shear stress can be obtained directly from the use of constitutive relations, satisfying the shear stress-free boundary conditions at top and bottom of the beam. Hence, the theory obviates the need of shear correction factor. Governing differential equations and boundary conditions of the theory are obtained using the principle of virtual work. General solutions of thick isotropic simply supported beam subjected to Single sine load are obtained. Expressions for transverse displacement of beams are obtained and contribution due to shear deformation to the maximum transverse displacement is investigated. The results of the present theory are compared with those of other refined shear deformation theories of beam to verify the accuracy of the theory. Keywords: thick beam, shear deformation, isotropic beam, transverse shear stress, static flexure, hyperbolic shear deformation theory, principle of virtual work
INTRODUCTION
The wide spread use of shear flexible materials in aircraft, automotive, shipbuilding and other industries has stimulated interest in the accurate prediction of structural behavior of beams. Theories of beams involve basically the reduction of a three dimensional problems of elasticity theory to a one-dimensional problems. Since the thickness dimension is much smaller than the longitudinal dimension, it is possible to approximate the distribution of the displacement, strain and stress components in the thickness dimension. The various methods of development of refined theories based on the reduction of the three dimensional problems of mechanics of elastic bodies are discussed by Gol denveizer,[1] Kil
chevskiy,[2] Donnell,[3] Vlasov and Leontev,[4] Sayir and Mitropoulos.[5] It is well-known that elementary theory of bending of beam based on Euler-Bernoulli hypothesis that the plane sections which are perpendicular to the neutral layer before bending remain plane and perpendicular to the neutral layer after bending, implying that the transverse shear and transverse normal strains are zero. Thus the theory disregards the effects of the shear deformation. It is also known as classical beam theory. The theory is applicable to slender beams and should not be applied to thick or deep
IJSEA (2016) 20-28 © JournalsPub 2016. All Rights Reserved Page 20
International Journal of Structural Engineering and Analysis Vol. 2: Issue 2
www.journalspub.com
Assessment of the Factors Influencing Facility Maintenance
Problems in Rufus Giwa Polytechnic, Owo, Nigeria
Adeola Taiwo Olusola1*, Akinola Olanike Oluwatosin1, Oladoja Ismaila Olawale2 1Department of Estate Management and Valuation, Rufus Giwa Polytechnic, Owo, Nigeria
2Department of Estate Management, Kwara State Polytechnic, Ilorin, Nigeria
ABSTRACT This survey is carried to assess the facility maintenance challenges in higher institutions of learning by adopting Rufus Giwa Polytechnic, Owo. The study particularly examined those factors that contribute to maintenance problems and those that influence maintenance programme on the institutional buildings in the study area. Structured questionnaires were distributed to respondents and the results were analyzed. Findings revealed that untimely replacement of defective fitting is the main maintenance challenge in the institution; this can be attributed to inadequate funding which is also a major factor responsible for maintenance problems in the institution. The study also shows that the end users’ need was rarely considered at the planning stage while no plan was put in place for the maintenance work on the buildings except daily cleaning. These factors among others contributed to the maintenance problems in the institution. It was recommended that educational planners and policy makers should ensure that adequate budget provision is made for facilities maintenance and management which must also include cost of technology in order to ensure the sustainability of the infrastructure. Keywords: facility, fittings, institutional building, maintenance, management
INTRODUCTION Facilities management is an integral part of the overall management in a learning environment. Facilities management according to the Centre for Facilities Management is “the process by which an organization delivers and sustains support services in a quality environment to meet strategic needs”.[1] The provision of adequate facilities management can be said to provide best value for the facilities and building services in any organization.[2] This is because it keeps the facility in good working condition and makes it available for its lifecycle. The condition of facilities in a learning environment determines the performance of not only the tutors but also the scholars.[3] Learning process is deemed to be hindered and academic productivity
decline when facilities’provisions are inadequate or dysfunctional. Constant property maintenance is an absolute necessity for improved real estate investments. Maintenance focuses on sustenance and conservation of existing buildings with a view to retaining their structural stability and functionalities.[3] Asiabaka noted that the actualization of the goals and objectives of education requires provision, maximum utilization and appropriate management of the facilities.[4] With the advancement in science and technology, there is need to adopt contemporary facilities management techniques to improve higher institution learning process. Studies by Jekayinka; Suleiman and Atiku, Crie and Babatope
IJSEA (2016) 29–31 © JournalsPub 2016. All Rights Reserved Page 29
International Journal of Structural Engineering and Analysis Vol. 2: Issue 2
www.journalspub.com
Review Insight: Repetitive Corrugation and Straightening to
Produce Nanograin Particles
Shashank Jain* Department of Mechanical Engineering, Dayalbagh Educational Institute, Agra, UP, India
ABSTRACT
Tedious folding and rectifying (RCS) is an as of late created serious plastic distortion procedure to deliver Ultra-Fine Grain (UFG) materials. The initial step is completed by twisting the work piece to a ridged shape, and the second step is expert by fixing the layered work piece between two level platens. The preparing cycle can be rehashed ordinarily. Keywords: finite element modeling, repetitive corrugation straightening, severe plastic deformation
INTRODUCTION
Extreme plastic twisting (SPD) is one of the strategies for acquiring fine crystalline structure in various mass metals and combinations, which have distinctive crystallographic structure. SPD causes the development of micrometer and sub-micrometer estimated sub-grains in the first coarse grain materials. As a consequence of that upgraded mechanical execution is watched. The instrument in charge of this impact is still under scrutiny, in any case, it is trusted that short and long-go converging shear groups created by plastic disfigurement assume a noteworthy part at grain subdivision and neighborhood dynamic recuperation and recrystallization forms add to grain refinement. Adequately expansive misshapening prompts a particular structure of disengagement free and very mis-arranged fine grains. At the point when characterizing a submicron grain structure the vital parameters, which are matter of concern, are normal separating of high edge grain limits (HAGB) and extent of HAGB range. The auxiliary changes brought about by SPD are reflected in
enhanced mechanical properties of metals. The reported impacts incorporate expanded hardness and yield stress, both highlighting inclination to immersion. The disadvantage of ultrafine grained structure materials is their constrained malleability. Some other examination uncovered expanded pliability and strength and additionally enhanced dumping and physical properties. The fine grained structure of UFG materials acquired by SPD prompts superplastic conduct of these materials at lower temperatures but then with higher twisting rates.[1,2] Huge plastic strains somewhere around 1 and 15 can be forced in chips shaped via plane-strain (2-D) machining of metals and compounds. This methodology has been utilized to analyze microstructure changes actuated by substantial strain misshapening in model frameworks – copper and its combinations, Precipitation – hardenable aluminum compounds, high quality materials, for example, titanium, Inconel 718 and 52100 steel, and a nebulous amalgam. It is demonstrated that materials with normal grain sizes in the
IJSEA (2016) 32–34 © JournalsPub 2016. All Rights Reserved Page 32
International Journal of Structural Engineering and Analysis Vol. 2: Issue 2
www.journalspub.com
Current Trends and Future Prospects in Development of Tall
Buildings
Anirudh Mathur* Department of Civil Engineering, IIT Delhi, India
ABSTRACT
From 19th century onwards development of tall buildings emerges and till now rapidly developing in all over the world. Especially in metro cities like Delhi-NCR, Mumbai, etc. growth rate for tall buildings were high which leads to destroy overall cycle of humans, animals and plants. Main factors need to be concerning is global warming and ozone layer depletion. Keywords: global warming, tall buildings INTRODUCTION
Tall structures all through the world are getting to be famous step by step. With the appearance of advanced development innovation and PCs, the fundamental point has been to develop more secure structures keeping in perspective the general financial aspects of the venture. An elevated structure, loft tower, office tower, condo piece, or square of pads, is a tall building or structure utilized as a private as well as office use. In a few regions they might be alluded to as “Multi Dwelling Unit” or “Vertical urban communities.” They can possibly decongest the urban sprawl on the ground level, and increment the urban thickness, lodging higher number of families in lesser space. Benefits incorporate they go about as points of interest; make remarkable horizon and proficient area use. In spite of the fact that there is no exact definition that is all around acknowledged, different bodies have attempted to characterize what “high-rise” implies[1–4]: The term “high-rise building” means
any building having an occupied floor(s) located more than 75 feet
above the lowest level of Fire Department vehicle access.
The Mumbai Municipal Corporation (BMC) proposed that any building with a height of 30 m (nine floors) be categorized as a high rise. This is an increase of 6 m from the existing definition (24 m or seven floors).
But from the structural point of view it
can be defined as the a building that its height will be affected by lateral forces resulting from earthquakes and wind forces to extent that such forces will play a major role in the process of design.
In interior structural system, the major part of the lateral load-resisting system is located within the interior of the building. Whereas in exterior structural system, the lateral loads resisting system, is located along the building perimeter.
RESEARCH INSIGHT
Indian cities are witnessing immense demographic expansion due to migration from surrounding villages, leading to urban sprawl, housing demand, rise in cost
Mechanical Engineering
Chemical Engineering
Architecture
Applied Mechanics
5 more...
1 more...
2 more...2 more...
5 more...
Computer Science and Engineering
Nanotechnology« International Journal of Solid State Materials« International Journal of Optical Sciences
Physics
Civil Engineering
Electrical Engineering
Material Sciences and Engineering
Chemistry
5 more...4 more...
3 more...
Biotechnology
3 more...
Nursing « International Journal of Immunological Nursing« International Journal of Cardiovascular Nursing« International Journal of Neurological Nursing« International Journal of Orthopedic Nursing« International Journal of Oncological Nursing
5 more... 4 more...
Subm
it
Your
Article 2
017
International Journal of
Structural Engineering
& AnalysisIJSEAJul–Dec 2016
www.journalspub.com
Top Related