R E C Y C L I N G S O L U T I O N S
Rental and Leasing Programs Available
For detailed specifications, recommendations, or free economic studies comparing various systems, contact Marathon Customer Care at
1-800-633-8974.
Stealth® Manual-Tie Horizontal Baler
Specifications Stealth 60” Stealth 72”
Bale Size 42 in. x 48 in. x 60 in.1067mm x 1219mm x 1524mm
42 in. x 48 in. x 72 in.1067mm x 1219mm x 1829mm
Bale weight Up to 1,400 lbs.635 kg
Up to 1,500 lbs.680 kg
Throughput 1-2 tons per hour900-1800 kg per hour
1-2 tons per hour900-1800 kg per hour
Performance
Maximum System Pressure 2,400 psi165 bar
2,400 psi165 bar
Maximum Force 67,900 lbf.302 kN
67,900 lbf.302 kN
Ram Face Pressure 43 psi296.5 kPa
43 psi296.5 kPa
Cycle Time 50 sec. 50 sec.
Weight (dry) 12,600 lbs.5715 kg
13,000 lbs.5897 kg
Pictures in this literature are illustrative only. Specifications are subject to change without notice in order to accommodate improvements to the equipment. Complies with ANSI standard Z245.5 and applicable OSHA Regulations. Products must be used with safe practice and in accordance with said regulations and standards.
© 2015 Marathon Equipment Company. All rights reserved. Printed in USA. | SWS-MR00017-101015
R E C Y C L I N G S O L U T I O N S
Dimensions: TOP VIEW
SIDE VIEW FRONT VIEW
Dimensions Length Width Height Hopper Type Feed Opening Feed Height
Stealth 60” 255 in.(6477mm)
83 5/8 in.(2123mm)
92 1/2 in.(2324mm)
Hand feed46” L x 60” W
1168mm x 1524mm69 5/8 in.1766mm
Stealth 72” 267 in.(6782mm)
83 5/8 in.(2123mm)
92 1/2 in.(2324mm)
Hand feed46” L x 60” W
1168mm x 1524mm69 5/8 in.1766mm
Marathon Equipment CompanyP.O. Box 1798Vernon, AL 35592-1798800.633.8974www.marathonequipment.com
NJPA Contract #060612-ESGwww.doveresg.com
Electrical Equipment
Electrical Motor460 - 3-phase
20 hp14.9 kW
20 hp14.9 kW
Electrical Control VoltageUL® and CUL® listed 120 VAC 120 VAC
Hydraulic Equipment
Pump Type Gear Gear
Pump Flow 18.5 gpm70 L/min.
18.5 gpm70 L/min.
Reservior 30 gal.113.6 lit.
30 gal.113.6 lit.
Hydraulic Cylinder (Bore) 6 in.152mm
6 in.152mm
Hydraulic Cylinder (Rod) 4 in.102mm
4 in.102mm
Hydraulic Cylinder (Stroke) 82 in.2083mm
82 in.2083mm
Please refer MarathonEquipment.com for the online brochure with the most up-to-date information.
Authorized Dealer:
R E C Y C L I N G S O L U T I O N S
Stealth® Manual-TieHorizontal Baler
Stealth Horizontal BalerStandard Features
• 46-inch wide by 60-inch long feed opening• “Hand feed” type hopper standard• Hydraulic bale door release• 1 to 2 tons per hour throughput• Through door and side tie-off• Start-up alarm• Control panel equipped with electrical disconnect switch
Optional Features• Photocell control• Bale made alarm• Chute feed hopper• Conveyor controls
Marathon’s Stealth baler is specifically designed for baling OCC and similar material with proven productivity for the recycling market.
The chute feed hopper with inspection door and interlock switch will accommodate pneumatic, gravity, or conveyor feeding systems.
The touchscreen enables full automatic and manual control with one touch. Screens may be customized, password protected, and are designed with alarm, diagnostic, and help screens.
Marathon’s Stealth Series balers feature a hydraulic door latch.
Top Related