R E C Y C L I N G S O L U T I O N S

Rental and Leasing Programs Available

For detailed specifications, recommendations, or free economic studies comparing various systems, contact Marathon Customer Care at

1-800-633-8974.

Stealth® Manual-Tie Horizontal Baler

Specifications Stealth 60” Stealth 72”

Bale Size 42 in. x 48 in. x 60 in.1067mm x 1219mm x 1524mm

42 in. x 48 in. x 72 in.1067mm x 1219mm x 1829mm

Bale weight Up to 1,400 lbs.635 kg

Up to 1,500 lbs.680 kg

Throughput 1-2 tons per hour900-1800 kg per hour

1-2 tons per hour900-1800 kg per hour

Performance

Maximum System Pressure 2,400 psi165 bar

2,400 psi165 bar

Maximum Force 67,900 lbf.302 kN

67,900 lbf.302 kN

Ram Face Pressure 43 psi296.5 kPa

43 psi296.5 kPa

Cycle Time 50 sec. 50 sec.

Weight (dry) 12,600 lbs.5715 kg

13,000 lbs.5897 kg

Pictures in this literature are illustrative only. Specifications are subject to change without notice in order to accommodate improvements to the equipment. Complies with ANSI standard Z245.5 and applicable OSHA Regulations. Products must be used with safe practice and in accordance with said regulations and standards.

© 2015 Marathon Equipment Company. All rights reserved. Printed in USA. | SWS-MR00017-101015

R E C Y C L I N G S O L U T I O N S

Dimensions: TOP VIEW

SIDE VIEW FRONT VIEW

Dimensions Length Width Height Hopper Type Feed Opening Feed Height

Stealth 60” 255 in.(6477mm)

83 5/8 in.(2123mm)

92 1/2 in.(2324mm)

Hand feed46” L x 60” W

1168mm x 1524mm69 5/8 in.1766mm

Stealth 72” 267 in.(6782mm)

83 5/8 in.(2123mm)

92 1/2 in.(2324mm)

Hand feed46” L x 60” W

1168mm x 1524mm69 5/8 in.1766mm

Marathon Equipment CompanyP.O. Box 1798Vernon, AL 35592-1798800.633.8974www.marathonequipment.com

NJPA Contract #060612-ESGwww.doveresg.com

Electrical Equipment

Electrical Motor460 - 3-phase

20 hp14.9 kW

20 hp14.9 kW

Electrical Control VoltageUL® and CUL® listed 120 VAC 120 VAC

Hydraulic Equipment

Pump Type Gear Gear

Pump Flow 18.5 gpm70 L/min.

18.5 gpm70 L/min.

Reservior 30 gal.113.6 lit.

30 gal.113.6 lit.

Hydraulic Cylinder (Bore) 6 in.152mm

6 in.152mm

Hydraulic Cylinder (Rod) 4 in.102mm

4 in.102mm

Hydraulic Cylinder (Stroke) 82 in.2083mm

82 in.2083mm

Please refer MarathonEquipment.com for the online brochure with the most up-to-date information.

Authorized Dealer:

R E C Y C L I N G S O L U T I O N S

Stealth® Manual-TieHorizontal Baler

Stealth Horizontal BalerStandard Features

• 46-inch wide by 60-inch long feed opening• “Hand feed” type hopper standard• Hydraulic bale door release• 1 to 2 tons per hour throughput• Through door and side tie-off• Start-up alarm• Control panel equipped with electrical disconnect switch

Optional Features• Photocell control• Bale made alarm• Chute feed hopper• Conveyor controls

Marathon’s Stealth baler is specifically designed for baling OCC and similar material with proven productivity for the recycling market.

The chute feed hopper with inspection door and interlock switch will accommodate pneumatic, gravity, or conveyor feeding systems.

The touchscreen enables full automatic and manual control with one touch. Screens may be customized, password protected, and are designed with alarm, diagnostic, and help screens.

Marathon’s Stealth Series balers feature a hydraulic door latch.