Precast Production Tolerances
As per production drawings, otherwise follow standard guide for tolerances as attached
in this section.
Guide on Tolerances (RC Component)
Dimensiona) Length of member
- Up to 3m
- 3m to 4.5m
- 4.5m to 6m
- Every subsequent 6m
b) Cross sectional dimension
c) Straightness / Bow (Deviation from intended)
- Up to 3m
- 3m to 4.5m
- 4.5m to 6m
- Every subsequent 6m
d) Squareness / Bow (Different)
- Up to 1.2m (incl.)
- Over 1.2m to less than 1.8m
- 1.8m and over
e) Twist (Differences from other 3 corners)
- Up to 600mm wide and 6m in length
- Over 600mm wide and any length
±6mm
± 9mm
± 12mm
± 6mm (additional)
+ 10mm / - 5mm
6mm
9mm
12mm
6mm (additional)
6mm
9mm
12mm
6mm
12mm
Openinga) Size
b) Location
+ 10mm
± 25mm
Lifting Point / Inserts
Sleeve and Connections
Cast-In Items
Opening for Bolted Connection
Insert Plate
Anchor Bolt (on top of column)
± 20mm
± 6mm
± 6mm
± 3mm
± 5mm
± 2mm
Top Related