Connect NVR to your HDTV using HDMI just like a digital satellite box. Itshould be noted that not all the TV can automatically adjust the correctHDMI input, please check your TV’s user guide for this information.

Use the RJ45 Ethernet cable to connect your Internet router for mobilemonitoring. NVR can work without Internet network connection but somefunctions may be a�ected.

You can connect the USB mouse supplied to operate the NVR, just likeplugging a mouse in to a PC or Laptop.

- Power up the NVR- Connect the Plug-and-Play cameras via the PoE interfaces.- Enter the Camera Management interface. (Menu> Camera> Camera)- You can see the connected cameras are listed.

Use your TV or monitor to log in the NVR operation interface

STEP1 Connect the NVR to your TV / monitor Connect the NVR to your networkSTEP

2

Connect the cameras and power upSTEP4 Log-in to your NVRSTEP

5

Connect the mouse to your NVRSTEP3

Or

- Click the edit button, and select the Adding Method as Manual in the drop-down list.- Now You have disabled the PoE interface by selecting the Manual while the current channel can be used as a normal channel and the parame-ters can also be edited.- Click Apply to �nish adding.

Add a normal CameraSTEP6

Password Modi�cationSTEP7

- Enter the User Management interface. (Menu> Configuration> User)- Select the user that you want to modify the password. Click the icon .- Tick the Change Password box. Enter the new password in the New Password and Con�rm �elds.

*The default account and password is admin and 12345.

HD IP PoE KIT QUICK START GUIDE

48V Poweradapter

Simpli�ed Management

NVR with 4 PoE ports

2x IR Bullet cameras

LAN