8/18/2019 Ndteng Olympus
1/60
Product Catalo
• Eddy Current Probes
• Ultrasonic Transducers
• Engine Probes
• EC and UT Reference Standards
920-087
8/18/2019 Ndteng Olympus
2/60
• Eddy current probes
• Ultrasonic transducers
• Engine probes
• EC and UT referencestandards
• Probe kits
• TTU equipment for graphite
and bonded structures
• Connecting cables and
adapters
• Probes and tooling for
restricted access and precise
positioning
• Repair services
• Full service EDM notching for
reference standards
NDT Engineering Corporation19620 Russell Rd.Kent, WA 98032USATelephone: (1) (253) 872-3565Fax: (1) (253) 872-0857
www.ndteng.com
Olympus NDTOlympus NDT is a leading global manufac-turer of innovative nondestructive testinginstruments that are used in industrial andresearch applications ranging from aero-space, energy, automotive, and electronicsto manufacturing. Olympus NDT instru-ments contribute to the quality of products
and add to the safety of infrastructureand facilities. They include flaw detectors,thickness gages, bond testers, pulser-receiv-ers, transducers, and advanced systemsfor inline applications. Our leading edgetechnologies include ultrasound, ultrasound phased array, eddy current, and eddy cur-rent array.
Olympus NDT offers products and ser-vices from several high quality brands: R/DTech® , Panametrics-NDT ™ , NDT Engineer-ing, Sonic® , and Nortec® . For many decades
these brands have earned excellent reputa-tions for providing cost-effective solutionsand excellent support and customer service.
Based in Waltham, Massachusetts, USA, thecompany has sales and service centers inall principal industrial locations worldwide.Visit www.olympusNDT.com for applica-tions and sales assistance near you.
NDT Engineering Corporation
NDT Engineering Corporation, a subsidiary ofOlympus NDT inc., is one of the world’s largestdesigner, manufacturer, and marketer of probes
and transducers for EC and UT inspection. Ourproducts include eddy current probes, ultra-sonic transducers, engine probes, and referencestandards in addition to the full service capabili-ties of EDM and repair services. Our productscan be found in commercial, commuter, andmilitary aircraft NDT documents.
NDT Engineering offers over 10,000 standardand custom-designed EC probes, UT transduc-ers, reference standards, and accessory itemsfor virtually every application. This catalog is arepresentative sample of our total product line.For applications that require a nonstandard
product, we proudly offer the most compre-hensive custom probe and application servicesavailable anywhere.
8/18/2019 Ndteng Olympus
3/60
Table of ContentsIntroduction..................................................iiOlympus NDT ...............................................ii
NDT Engineering Corporation ............................ ii
General Information..................................... 2
Eddy Current Products .............................. 3
Ordering Information................................... 3Bolt Hole Probe Sizing Chart ...................... 4Bolt Hole Probes ......................................... 5
Universal Rotor....................................................5Foerster Rotor ..................................................... 5Nortec Rechii Rotor.............................................6Nortec PS5 Rotor................................................6Zetec® Rotor........................................................7Elotest Standard Rotor........................................8Elotest Mini Rotor................................................8Rotary Countersink .............................................9Manual Standard ..............................................10
Manual Countersink .......................................... 11Manual for Locator UHB ................................... 11 Adjustable Diameter.......................................... 12 Adjustable Diameter.......................................... 13 Adjustable Diameter.......................................... 14 Adjustable Diameter.......................................... 15
Surface Probes.......................................... 16Straight - Microdot............................................ 16Straight - Fischer® Triax.....................................16Straight - Microtip ............................................. 17Straight - Plastic Tip..........................................17Right Angle Tip 0.5 in. Drop .............................. 18
Right Angle Tip 0.2 in. Drop .............................. 19Right Angle Tip 0.03 in. Drop ............................ 1945º Tip (0.5 in. Drop)..........................................2045º Tip (0.3 in. Drop)..........................................2030º Tip (0.5 in. Drop)..........................................21
Defectometer Probes................................ 22Hole Probes ......................................................22Surface Probes..................................................23
Low-Frequency Probes............................. 24Spot Bridge ....................................................... 24Ring Bridge........................................................25Spot Reection..................................................26
Ring Reection..................................................27Miscellaneous Probes............................... 28Sliding Probes ................................................... 28Wheel Probes.................................................... 29Wheel Standards...............................................29Blade ................................................................. 30Finger ................................................................30Spring Loaded...................................................31Flexshaft............................................................31
Cables and Adapters................................. 32Reference Coil Adapters and Cables................32Rotary Adaptors ................................................ 32
Bridge Cables and Adapters ............................ 33Reection Cables and Adapters .......................34
Probe Kits .................................................. 35Hole Probes.......................................................35Surface Probes..................................................35Low-Frequency Probes.....................................35
Ultrasound Products................................ 36
Ordering Information................................. 36Contact Transducers................................. 37Standard............................................................37Delay Line..........................................................38Dual Element - Cylindrical.................................39
Shear Wave Transducers .......................... 40Micro Miniature..................................................40Subminiature ..................................................... 41Miniature............................................................420.375 in. Element...............................................430.500 in. Element...............................................43SwiftChange™ Transducers and Wedges .......... 44
Immersion Transducers............................. 45Standard and Slim-Line.....................................45Cables, Kits, and MiscellaneousUT Accessories.......................................... 46
Cables and Extensions......................................46Custom Kits and Guides ................................... 46Transducer Certification .................................... 47Roller Probes, Yokes, and Gimbals...................48Waterjet Yokes, Nozzles, andNozzle Transducers...........................................49
Reference Standards................................. 50 Aircraft Standards ............................................. 50
Hole Standards..................................................51Surface Standards.............................................51Ultrasonic Standards.........................................52Composite Standards ....................................... 53
Technical Notes ........................................ 54Eddy Current Tutorial andProbe Selection Information ..................... 54Probe Types and Their Usage................... 56Troubleshooting......................................... 57Legal Notices............................................. 58Disclaimer.................................................. 58Legal Notices............................................. 59Disclaimer.................................................. 59
8/18/2019 Ndteng Olympus
4/60
NDT EngineeringWe Would Like to Help You!
• By continuing to develop solutions concerning inspection requirements for commercial and military
aircraft.
• By solving your eddy current and ultrasonic inspection problems.
• By meeting your aircraft on ground (AOG) or other on time delivery requirements.
• By shipping you quality products that are backed by a lifetime guarantee against manufacturingdefects.
• By providing no-cost, quality, technical support by phone, fax, or e-mail.
General Information
Fast Delivery
Because we know that fast delivery is important for most of ourcustomers, we work very hard to meet or exceed all deliveryrequirements. Whether it is an AOG or some other urgent require-ment and that our customer must have it by a specific date, thatdelivery will become our very highest priority.
The Best Quality and Service
As with any company, the day-to-day capability lays with itsemployees, and we are fortunate to have outstanding talentswith experience dating back to the early days of EC and UTimplementation in the 1950s. We also boast major upgrades andimprovements in both equipment and personnel to our EDMshop and our quality control. We are now able to facilitate all ofour customer needs while maintaining the strictest of controls onthe quality of our products. This enables us to quickly serve themarketplace with products of exceptional quality and value. NDTEngineering’s commitment to providing the very best customerservice is evidenced by ongoing investments in manufacturing
technology and productivity-enhancing equipment.New Products
Numerous products are not included in this catalog as we areconstantly developing new probes and transducers to solveproblems for an ever-changing industry. To that end, we havedeveloped a team of highly qualified individuals who are at yourdisposal, ready to design and manufacture a solution for yournext problem. So, if what you are looking for is not in this cata-log, call us and we will get you what you need.
Repair Services
NDT Engineering will replace defective probes or transducer fromany manufacturer at a repair cost:
Eddy current probes
Engine probes
UT transducers
Adapters
Cable assemblies
TTU equipmentWe guarantee to return repaired items in like-new condition withnew product warranty at a price of 15% to 40% below the cost ofnew. Cost depends on the extent of repair and replacement partsrequired. Items can be submitted for a price quote prior to repair,but if the customer decides against repair, the cost of return ship-
ping will be the responsibility of the customer.
Warranty
All items sold by Olympus NDT under the NDT Engineeringbrand are warranted against manufacturing defects. Wear, dam-age, misuse, and corrosion are not covered by warranty. War-ranty length is per the following table:
Items Warranty Length
EC Probes Lifetime
UT Transducers Six (6) months
Adapters Lifetime
Reference Standards Lifetime
All items returned under warranty must reference an RMA num-ber (returned material authorization), which must be requestedfrom our office and visibly written on returned goods packaging.
If it is determined that wear, damage, or corrosion is due to faultymaterials or design, the item will be replaced at no charge. War-ranted items will be repaired to like new condition or replaced asdetermined by NDT Engineering. These items will have a full war-ranty starting at the date the customer receives the returned item.
The customer will pay shipping and duty costs as applicable, andthen ship the item to:
NDT Engineering Corporation19620 Russell Road, Kent, WA 98032USA
NDT Engineering will pay return shipping costs via the most eco-nomical means that have a shipping period of less that 10 days.Shipping period is defined as the length of time in transit betweenthe departure from our plant and the arrival at destination. Thisexcludes delays such as customs in the destination country.
8/18/2019 Ndteng Olympus
5/60
Eddy Current Products
Ordering InformationThe basic part numbers found in this catalog follow a logical, easy to use, numbering format; however, when adding options, it isimportant to remember the three following rules:
1. Every item in this catalog begins with a letter or letters that relate to its corresponding product such
as ”BP” for bolt hole probe, ”MP”for micro (surface) probe, etc.
2. Letters are then followed by a set of numbers that signify either a hole size, length, OD, or angle and
drop length (in the case of surface probes), etc.
3. Option letters are added at the end of the basic part number to designate special inspection
requirements or user requirements (see following lists).
Option list 1 – without slash (placed after basic part number on surface probes)
FX 1⁄8 in. diameter flexible shaft
B bent shaft convenient handle
C curved angle drop (offered on all angled surface probes 0.30 in. drop or longer)
Option list 2 – with slash (placed after basic part number or any option from list 1)
/SE spread-end tip
/SS stainless steel body
/TF Fischer® triax connector
/4F 4-pin Fischer connector
/7L Staveley PowerLink™
/200K-1M 500 kHz center frequency
/1-3M 2 MHz center frequency for MP
/1-6M 2 MHz center frequency for MTF only
/x.xWL working length in inches
/x.xMWL working length in millimeters
/x.xOAL overall length in inches
/x.xMOAL overall length in millimeters
With these options in mind, part numbers can be built as shown in the examples below.
MP905-50FX/1-3M BPU-5.0M/SS/50MWL LR017-1/TF
Basic part number:
Shielded surface probe with a rightangle 1 ⁄ 2 in. drop and a 5 in. length.
Basic part number:
Universal rotary bolt hole probewith a 5 mm diameter.
Basic part number:
Low-frequency, bridge type ringprobe center frequency at 100 Hzand an OD of 0.7 in.
Options:
FX: flexible copper shaft/1-3M: center frequency 2 MHz
Options:
/SS: stainless steel/50MWL: 50 mm working length
Options:
/TF: Fischer triax connector
Note: not all options are available for all products
8/18/2019 Ndteng Olympus
6/60
Bolt Hole Probe Sizing Chart
Size 8 9 10 11 12 13 14 15 16 17
Head
diameter
1 ⁄ 8 in. 9 ⁄ 64 in. 5 ⁄ 32 in. 11 ⁄ 64 in. 3 ⁄ 16 in. 13 ⁄ 64 in. 7 ⁄ 32 in. 15 ⁄ 64 in. 1 ⁄ 4 in. 17 ⁄ 64 in.
0.125 0.140 0.156 0.171 0.187 0.203 0.218 0.234 0.250 0.265
3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mmSize 18 19 20 21 22 23 24 25 26 27
Head
diameter
9 ⁄ 32 in. 19 ⁄ 64 in. 5 ⁄ 16 in. 21 ⁄ 64 in. 11 ⁄ 32 in. 23 ⁄ 64 in. 3 ⁄ 8 in. 25 ⁄ 64 in. 13 ⁄ 32 in. 27 ⁄ 64 in.
0.281 0.296 0.312 0.328 0.343 0.359 0.375 0.390 0.406 0.421
7.14 mm 7.54 mm 7.94 mm 8.33 mm 8.73 mm 9.13 mm 9.52 mm 9.92 mm 10.32 mm 10.72 mm
Size 28 29 30 31 32 33 34 35 36 37
Head
diameter
7 ⁄ 16 in. 29 ⁄ 64 in. 15 ⁄ 32 in. 31 ⁄ 64 in. 1 ⁄ 2 in. 33 ⁄ 64 in. 17 ⁄ 32 in. 35 ⁄ 64 in. 9 ⁄ 16 in. 37 ⁄ 64 in.
0.437 0.453 0.468 0.484 0.500 0.515 0.531 0.546 0.562 0.578
11.11 mm 11.51 mm 11.91 mm 12.30 mm 12.70 mm 13.10 mm 13.49 mm 13.89 mm 14.29 mm 14.68 mm
Size 38 39 40 41 42 43 44 45 46 47
Head
diameter
19 ⁄ 32 in. 39 ⁄ 64 in. 5 ⁄ 8 in. 41 ⁄ 64 in. 21 ⁄ 32 in. 43 ⁄ 64 in. 11 ⁄ 16 in. 45 ⁄ 64 in. 23 ⁄ 32 in. 47 ⁄ 64 in.
0.593 0.609 0.625 0.640 0.656 0.671 0.687 0.703 0.718 0.734
15.08 mm 15.48 mm 15.88 mm 16.27 mm 16.67 mm 17.07 mm 17.46 mm 17.86 mm 18.26 mm 18.65 mm
Size 48 49 50 51 52 53 54 55 56 57
Head
diameter
3 ⁄ 4 in. 49 ⁄ 64 in. 25 ⁄ 32 in. 51 ⁄ 64 in. 13 ⁄ 16 in. 53 ⁄ 64 in. 27 ⁄ 32 in. 55 ⁄ 64 in. 7 ⁄ 8 in. 57 ⁄ 64 in.
0.750 0.765 0.781 0.793 0.812 0.828 0.843 0.859 0.875 0.890
19.05 mm 19.45 mm 19.84 mm 20.24 mm 20.64 mm 21.03 mm 21.43 mm 21.83 mm 22.23 mm 22.62 mm
Size 58 59 60 61 62 63 64 68 72 76
Head
diameter
29 ⁄ 32 in. 59 ⁄ 64 in. 15 ⁄ 16 in. 61 ⁄ 64 in. 31 ⁄ 32 in. 63 ⁄ 64 in. 1 1 1 ⁄ 16 in. 1 1 ⁄ 8 in. 1 3 ⁄ 16 in.
0.906 0.921 0.937 0.953 0.968 0.984 1 1.062 1.125 1.187
23.02 mm 23.42 mm 23.81 mm 24.21 mm 24.61 mm 25.00 mm 25.40 mm 27.0 mm 28.58 mm 30.16 mm
Size 80 84 88 92 96 104 112 120 128 136
Head
diameter
1 1 ⁄ 4 in. 1 5 ⁄ 16 in. 1 3 ⁄ 8 in. 1 7 ⁄ 16 in. 1 1 ⁄ 2 1 5 ⁄ 8 in. 1 3 ⁄ 4 in. 1 7 ⁄ 8 in. 2.00 2 1 ⁄ 8 in.
1.250 1.312 1.375 1.437 1.500 1.625 1.750 1.875 2.00 2.125
31.75 mm 33.34 mm 34.93 mm 36.51 mm 38.1 mm 41.28 mm 44.45 mm 47.63 mm 50.8 mm 53.98 mm
Size 144 152 160 168 176 184 192
Head
diameter
2 1 ⁄ 4 in. 2 3 ⁄ 8 in. 2 1 ⁄ 2 2 5 ⁄ 8 in. 2 3 ⁄ 4 in. 2 7 ⁄ 8 in. 3.0
2.250 2.375 2.500 2.625 2.750 2.875 3.00
57.15 mm 60.33 mm 63.5 mm 66.68 mm 69.85 mm 73.03 mm 76.2 mm
8/18/2019 Ndteng Olympus
7/60wwww.ndteng.com • [email protected]
Bolt Hole Probes
Hole size Universal Rotor Foerster Rotor
ecima Fractiona Metric nshielde hielde nshielde hielde
.12 n. 1 ⁄ n. .1 BP - N BPD- N
.1 n. 2 n. . BP -1 BP F-1 BPD-1 BPDF-1
BP -4.0 BP F-4.0 BPD-4. BPDF-4.
.1 n. 3 6 n. 4.7 BP -1 BP F-1 - -
BP -5.0 BP F-5.0 BPD- . BPDF- .
BP -6.0 BP F-6.0 BPD- . BPDF- .
.2 n. 1 ⁄ n. . BP -1 BP F-1 BPD-1 BPDF-1
BP -7.0 BP F-7.0 BPD-7. BPDF-7.
. 1 n. ⁄ 6 n. 7. BP -2 BP F-2 BPD-2 BPDF-2
BP -9.0 BP F-9.0 BPD- . BPDF- .
. 7 n. ⁄ n. . mm BP -2 BP F-2 - -
BP -11.0 BP F-11.0 BPD-11. BPDF-11.
.4 n. 7 ⁄ 6 n. 11. mm BP -2 BP F-2 BPD-2 BPDF-2
. n. 1 ⁄ n. 12. BP -3 BP F-3 BPD- BPDF-
1 mm BP -13.0 BP F-13.0 BPD-1 . BPDF-1 .
. n. ⁄ 6 n. 14.2 BP -3 BP F-3 BPD- BPDF-
1 BP -15.0 BP F-15.0 BPD-1 . BPDF-1 .
. 2 n. ⁄ n. 1 . BP -4 BP F-4 BPD-4 BPDF-4
. n. 11 6 n. . BP -4 BP F-4 - -
.7 n. ⁄ n. 1 . BP -4 BP F-4 BPD-4 BPDF-4The universal rotor is suitable for the following rotary guns: Hocking mini drive, Rohmann mini-rotor, Nortec MiniMite (with 4-pin Fischer) and Spitfire 2000, Uniwest
R scanner and Zetec Z -4 high speed scanner.
Standard Configuration
Universa Rotor
• 100 kHz–2 MHz• Black plastic body
Foerster Rotor • z– z• Black plastic body
ext Page
Rechii Rotor
• kHz–2 MHz• ac p ast c o y
Working length for Rechii rotor is per
the following table:
ize range WL
Less then -18 1.1 in.
-18 or greater 1.5 in.
-18/SE or greater .0 in.
Universa , Foerster anPS5 Rotor
• 100 kHz–2 MHz• Black plastic body
Working length is per the ollowing table:
ize range WL
8–15 1.1 in.
16–64 .0 in.
Universal Rotor Foerster Rotor
Options Add to end of partnumber if other thanstandard
/SE: spread end
/SS: stainless steel
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
8/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
o e s ze Nor ec Rec Ro or or ec P 5 Ro or
ec ma ract ona etr c ns e e hielde ns e e hielde
. n. 1 ⁄ n. . - A 5- A
. 5 n. ⁄ 2 n. . -1 -1 5-1 5F-1
-4.0 -4.0 5-4.0 5F-4.0
. n. ⁄ 6 n. .7 -1 -1 5-1 5F-1
-5.0 -5.0 5-5.0 5F-5.0
-6.0 -6.0 5-6.0 5F-6.0
. 5 n. 1 ⁄ n. . mm -1 -1 5-1 5F-1
-7.0 -7.0 5-7.0 5F-7.0
. n. ⁄ 6 n. . mm -2 -2 5-2 5F-2
-9.0 -9.0 5-9.0 5F-9.0
. 7 n. ⁄ n. .5 mm -2 -2 5-2 5F-2
-11.0 -11.0 5-11.0 5F-11.0
. n. 7 6 n. . -2 -2 5-2 5F-2
.5 n. 1 ⁄ n. . -3 -3 5-3 5F-3
-13.0 -13.0 5-13.0 5F-13.0
.5 n. ⁄ 6 n. . -3 -3 5-3 5F-3
5 -15.0 -15.0 5-15.0 5F-15.0
. n. ⁄ n. 5. -4 -4 5-4 5F-4
. n. 11 ⁄ 6 n. 7. -4 -4 5-4 5F-4
.75 n. ⁄ n. . -4 -4 5-4 5F-4
Nortec Rechii RotorRA 19, RA 2000, or MiniMite (with 4-pin LEMO)
Nortec PS5 Rotor
Options Add to end of partnumber if other thantandard
/SE: spread end
/SS: stainless steel
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
9/60wwww.ndteng.com • [email protected]
Zetec® Rotor
o e s zeZetec Rotor
so ute erent a
ec ma ract ona etr c ns e e hielde ns e e hielde
. n. 1 ⁄ n. . A - A
. 5 n. ⁄ 2 n. . -1 -1 -1 -1
-4.0 -4.0 -4.0 -4.0
. n. ⁄ 6 n. .7 -1 -1 -1 -1
-5.0 -5.0 -5.0 -5.0
-6.0 -6.0 -6.0 -6.0
. 5 n 1 ⁄ n. . mm -1 -1 -1 -1
-7.0 -7.0 -7.0 -7.0
. n. ⁄ 6 n. . mm -2 -2 -2 -2
-9.0 -9.0 -9.0 -9.0
. 7 n. ⁄ n. .5 mm -2 -2 -2 -2
-11.0 -11.0 -11.0 -11.0
. n. 7 6 n. . -2 -2 -2 -2
.5 n. 1 ⁄ n. . -3 -3 -3 -3
-13.0 -13.0 -13.0 -13.0
.5 n. ⁄ 6 n. . -3 -3 -3 -3
5 -15.0 -15.0 -15.0 -15.0
. n. ⁄ n. 5. -4 -4 -4 -4
. n. 11 ⁄ 6 n. 7. -4 -4 -4 -4
.75 n. ⁄ n. . -4 -4 -4 -4
Standard Configuration
Zetec Rotor
• Frequency: see chart• ac p ast c o y
Next Page
Elotest Standard Rotor
• 100 kHz–2 MHz• ac p ast c o y
Elotest Mini Rotor
• 100 kHz–2 MHz• Black plastic body
Working length is per the ollowing table:
Size range WL
–15 1.1 in.
16–64 2.0 in.
Options Stan ar requency Add to end of partnumber if other thantandard
/SE: spread end Absolute probe: 50 kHz–500 kHz
/SS: stainless steel Differential probe: 300 kHz–1 MHz
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
10/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Elotest Standard RotorRohmann SR1, SR2
Elotest Mini RotorRohmann SMR4, MR3
o e s ze Elo es an ar Ro or o es M n Ro or
ec ma ract ona etr c ns e e hielde ns e e hielde
. n. 1 ⁄ n. . - A - A
. 5 n. ⁄ 2 n. . -1 -1 -1 -1
-4.0 -4.0 -4.0 -4.0
. n. ⁄ 6 n. .7 -1 -1 -1 -1
-5.0 -5.0 -5.0 -5.0
-6.0 -6.0 -6.0 -6.0
. 5 n 1 ⁄ n. . mm -1 -1 -1 -1
-7.0 -7.0 -7.0 -7.0
. n. ⁄ 6 n. . mm -2 -2 -2 -2
-9.0 -9.0 -9.0 -9.0
. 7 n. 3 ⁄ n. .5 mm -2 -2 -2 -2
-11.0 -11.0 -11.0 -11.0
. n. 6 n. . -2 -2 -2 -2
.5 n. 1 ⁄ n. . -3 -3 -3 -3
-13.0 -13.0 -13.0 -13.0
.5 n. ⁄ 6 n. . -3 -3 -3 -3
5 -15.0 -15.0 -15.0 -15.0
. n. ⁄ n. 5. -4 -4 -4 -4
. n. 11 ⁄ 6 n. 7. -4 -4 -4 -4
.75 n. 3 ⁄ n. . -4 -4 -4 -4
Options Add to end of partnumber if other thanstandard
/SE: spread end
/SS: stainless steel
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
11/60wwww.ndteng.com • [email protected]
ole sizen versa Rotor otest M n Rotor etec otor Rec Rotor
Decima ractiona etric
.12 n. 1 ⁄ n. .1 100- EM100- Z100- RA100-
.1 n. ⁄ 2 n. . 100-1 EM100-1 Z100-1 RA100-1
mm 100-4.0 EM100-4.0 Z100-4.0 RA100-4.0
.1 n. ⁄ 6 n. .7 100-1 EM100-1 Z100-1 RA100-1
mm 100-5.0 EM100-5.0 Z100-5.0 RA100-5.0
100-6.0 EM100-6.0 Z100-6.0 RA100-6.0
.2 n. 1 ⁄ n. . mm 100-1 EM100-1 Z100-1 RA100-1
100-7.0 EM100-7.0 Z100-7.0 RA100-7.0. 1 n. 6 n. . 100-2 EM100-2 Z100-2 RA100-2
100-9.0 EM100-9.0 Z100-9.0 RA100-9.0
. 7 n. ⁄ n. . 100-2 EM100-2 Z100-2 RA100-2
100-11.0 EM100-11.0 Z100-11.0 RA100-11.0
.4 n. ⁄ 6 n. 1. 100-2 EM100-2 Z100-2 RA100-2
. n. 1 ⁄ n. 2. 100-3 EM100-3 Z100-3 RA100-3
100-13.0 EM100-13.0 Z100-13.0 RA100-13.0
. n. ⁄ 6 n. 4.2 mm 100-3 EM100-3 Z100-3 RA100-3
100-15.0 EM100-15.0 Z100-15.0 RA100-15.0
. 2 n. ⁄ n. . mm 100-4 EM100-4 Z100-4 RA100-4
. n. 11
⁄ 6
n. . 100-4 EM100-4 Z100-4 RA100-4.7 n. ⁄ n. . mm 100-4 EM100-4 Z100-4 RA100-4
Rotary Countersink
ptions Overall length Add to end of partnumber if other thanstandard
/SS: stainless steel Universal rotor: 2.5 in.
/x.xWL: working length Mini rotor: 2.125 in.
/x.xOAL: overall length Zetec rotor: 2.225 in.
Other angles are available by replacing the “100” with the
required countersink angle in the part numberRechii rotor: 2.0 in.
Foerster rotor: 2.2 in.
8/18/2019 Ndteng Olympus
12/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Manual Standard
o e s zeManual Standard
–5 z z– z
ec ma ract ona etr c ns e e hielde ns e e hielde
. n. ⁄ 1 n. . - A PM-8 200K-1 A
. 5 n. ⁄ 2 n. . -1 -1 PM-10 200K-1 PMF-10 200K-1
-4.0 -4.0 PM-4.0M 200K-1 PMF-4.0M 200K-1
. n. ⁄ 6 n. .7 -1 -1 PM-12 200K-1 PMF-12 200K-1
-5.0 -5.0 PM-5.0M 200K-1 PMF-5.0M 200K-1
-6.0 -6.0 PM-6.0M 200K-1 PMF-6.0M 200K-1
. 5 n. ⁄ 1 n. . mm -1 -1 PM-16 200K-1 PMF-16 200K-1
-7.0 -7.0 PM-7.0M 200K-1 PMF-7.0M 200K-1
. n. ⁄ 6 n. . mm -2 -2 PM-20 200K-1 PMF-20 200K-1
-9.0 -9.0 PM-9.0M 200K-1 PMF-9.0M 200K-1
. 7 n. ⁄ n. .5 mm -2 -2 PM-24 200K-1 PMF-24 200K-1
-11.0 -11.0 PM-11.0M 200K-1 PMF-11.0M 200K-1
. n. 6 n. . -2 -2 PM-28 200K-1 PMF-28 200K-1
.5 n. ⁄ 1 n. . -3 -3 PM-32 200K-1 PMF-32 200K-1
-13.0 -13.0 PM-13.0M 200K-1 PMF-13.0M 200K-1
.5 n. ⁄ 6 n. . -3 -3 PM-36 200K-1 PMF-36 200K-1
5 -15.0 -15.0 PM-15.0M 200K-1 PMF-15.0M 200K-1
. n. ⁄ n. 5. -4 -4 PM-40 200K-1 PMF-40 200K-1
. n. 11 ⁄ 6 n. 7. -4 -4 PM-44 200K-1 PMF-44 200K-1
.75 n. ⁄ n. . -4 -4 PM-48 200K-1 PMF-48 200K-1
Standard Configuration
Manua Stan ar(Compatible with Hockinglocator at 200 kHz)
• z– z,
200 kHz center frequency• Black plastic body
ext Page
Manual Countersink
• 100˚ Countersink• 2 in. overall length• 50 kHz–500 kHz• Black plastic body
Manual for Locator UHB
• 500 kHz or 6 MHz• ac p ast c o y
Working length is per the following table:
ize range WL
–15 1.1 in.
16–64 2.0 in.
Options Add to end of partnumber if other thantandard
/200K-1M, /1-3M: frequency
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
13/60wwww.ndteng.com • [email protected]
Manual for Locator UHBManual Countersink
o e s ze Manual oun ersin Manual for Loca or H
ec ma ract ona etr c ns e e hielde ns e e hielde
. n. 1 ⁄ n. . M100- A LM-8 500 A
. 5 n. ⁄ 2 n. . M100-1 MF100-1 LM-10 500 LMF-10 500
M100-4.0 MF100-4.0 LM-4.0M 500 LMF-4.0M 500
. n. ⁄ 6 n. .7 M100-1 MF100-1 LM-12 500 LMF-12 500
M100-5.0 MF100-5.0 LM-5.0M 500 LMF-5.0M 500
M100-6.0 MF100-6.0 LM-6.0M 500 LMF-6.0M 500
. 5 n. 1 ⁄ n. . mm M100-1 MF100-1 LM-16 500 LMF-16 500
M100-7.0 MF100-7.0 LM-7.0M 500 LMF-7.0M 500
. n. ⁄ 6 n. . mm M100-2 MF100-2 LM-20 500 LMF-20 500
M100-9.0 MF100-9.0 LM-9.0M 500 LMF-9.0M 500
. 7 n. ⁄ n. .5 mm M100-2 MF100-2 LM-24 500 LMF-24 500
M100-11.0 MF100-11.0 LM-11.0M 500 LMF-11.0M 500
. n. 6 n. . M100-2 MF100-2 LM-28 500 LMF-28 500
.5 n. 1 ⁄ n. . M100-3 MF100-3 LM-32 500 LMF-32 500
M100-13.0 MF100-13.0 LM-13.0M 500 LMF-13.0M 500
.5 n. ⁄ 6 n. . M100-3 MF100-3 LM-36 500 LMF-36 500
5 M100-15.0 MF100-15.0 LM-15.0M 500 LMF-15.0M 500
. n. ⁄ n. 5. M100-4 MF100-4 LM-40 500 LMF-40 500
. n. 11 ⁄ 6 n. 7. M100-4 MF100-4 LM-44 500 LMF-44 500
.75 n. ⁄ n. . M100-4 MF100-4 LM-48 500 LMF-48 500
Options Add to end of partnumber if other thanstandard
/500K or /6M: frequency
/x.xWL: working length
/x.xOAL: overall length
Options Add to end of partnumber if other thantandard
/200K-1M, /1-3M: frequency
8/18/2019 Ndteng Olympus
14/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Adjustable Diameter
Range of Hole izesStandard Manual Universal Rotor
ype ype ype ype
. n.–0.15 n. A A A YU-8 1
. 5 n.–0.18 n. A A A YU-10 1
mm– XM-5M 6 A XU-5M 6 YU-5M 6
. n.–0.25 n. XM-12 1 A XU-12 1 YU-12 1
mm– XM-6M 8 A XU-6M 8 YU-6M 8
. 5 n.–0.31 n. XM-16 2 A XU-16 2 YU-16 2
. n.–0.37 n. XM-20 2 A XU-20 2 YU-20 2
mm– mm XM-8M 10 A XU-8M 10 YU-8M 10
. 7 n.–0.43 n. XM-24 2 A XU-24 2 YU-24 2
mm– mm XM-10M 12 A XU-10M 12 YU-10M 12
. n.–0.50 n. XM-28 3 A XU-28 3 YU-28 3
mm– XM-12M 15 A XU-12M 15 YU-12M 15
.5 n.–0.62 n. XM-32 4 A XU-32 4 YU-32 4
5 mm– XM-15M 18 A XU-15M 18 YU-15M 18
. n.–0.75 n. XM-40 4 A XU-40 4 YU-40 4
mm– BXM-18M/21M N/A XU-18M 21 YU-18M 21
.75 n.–0.82 n. XM-48 5 A XU-48 5 YU-48 5
mm– XM-21M 24 A XU-21M 24 YU-21M 24
. n.–1. n. XM-56 6 A XU-56 6 YU-56 6
Drawings or this item are on next page
tandard Configuration
Standard Manual
• kHz–5 kHz,00 kHz center requency
• Black plastic body
Universal Rotor
• 100 kHz–2 MHz• Black plastic body
Next Page
X type adjustable
orking length on X type is
per the following table:
ize range WL
10/12–12/16 1.1 in.
16/20 and up 2.0 in.
Y type adjustable
or ng engt on type s
per the following table:
ize range WL
8/10 1.3 in.
0/12 1.3 in.
12/16–16/20 1.8 in.
0/24 and up 2.0 in.
Options Add to end of partnumber if other thantandard
/200K-1M, /1-3M: frequency
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
15/60wwww.ndteng.com • [email protected]
X probes have a thumbscrew that allows user to adjust coil
away rom rough-sur ace holes and is excellent or oversized
holes.
X Type Adjustable
Y Type Adjustable
probes have an outer sleeve that allows user to inspect blind holes
hile taking advantage of a screw-type adjustment.
Range of Hole izesFoerster Rotor Rechii Rotor PS5 Rotor
ype ype ype ype ype ype
. n.–0.15 n. A YD-8 1 A YRA-8 1 A Y5-8 1
. 5 n.–0.18 n. A YD-10 1 A YRA-10 1 A Y5-10 1
mm– XD-5M 6 YD-5M 6 XRA-5M 6 YRA-5M 6 X5-5M 6 Y5-5M 6
. n.–0.25 n. XD-12 1 YD-12 1 XRA-12 1 YRA-12 1 X5-12 1 Y5-12 1
mm– XD-6M 8 YD-6M 8 XRA-6M 8 YRA-6M 8 X5-6M 8 Y5-6M 8
. 5 n.–0.31 n. XD-16 2 YD-16 2 XRA-16 2 YRA-16 2 X5-16 2 Y5-16 2
. n.–0.37 n. XD-20 2 YD-20 2 XRA-20 2 YRA-20 2 X5-20 2 Y5-20 2
mm– mm XD-8M 10 YD-8M 10 XRA-8M 10 YRA-8M 10 X5-8M 10 Y5-8M 10
. 7 n.–0.43 n. XD-24 2 YD-24 2 XRA-24 2 YRA-24 2 X5-24 2 Y5-24 2
mm– mm XD-10M 12 YD-10M 12 XRA-10M 12 YRA-10M 12 X5-10M 12 Y5-10M 12
. n.–0.50 n. XD-28 3 YD-28 3 XRA-28 3 YRA-28 3 X5-28 3 Y5-28 3
mm– XD-12M 15 YD-12M 15 XRA-12M 15 YRA-12M 15 X5-12M 15 Y5-12M 15
.5 n.–0.62 n. XD-32 4 YD-32 4 XRA-32 4 YRA-32 4 X5-32 4 Y5-32 4
5 mm– XD-15M 18 YD-15M 18 XRA-15M 18 YRA-15M 18 X5-15M 18 Y5-15M 18
. n.–0.75 n. XD-40 4 YD-40 4 XRA-40 4 YRA-40 4 X5-40 4 Y5-40 4
mm– XD-18M 21 YD-18M 21 XRA-18M 21 YRA-18M 21 X5-18M 21 Y5-18M 21
.75 n.–0.82 n. XD-48 5 YD-48 5 XRA-48 5 YRA-48 5 X5-48 5 Y5-48 5
mm– XD-21M 24 YD-21M 24 XRA-21M 24 YRA-21M 24 X5-21M 24 Y5-21M 24
. n.–1. n. XD-56 6 YD-56 6 XRA-56 6 YRA-56 6 X5-56 6 Y5-56 6
Options Add to end of partnumber if other thanstandard
/x.xWL: working length
/x.xOAL: overall length
Adjustable Diameter
8/18/2019 Ndteng Olympus
16/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
ype Adjustable
X probes have a thumbscrew that allows user to adjust coil away from rough-surface
holes and is excellent for oversized holes.
Range of Hole izesElotest Standard Rotor Elotest Mini Rotor
ype ype ype ype
. n.–0.15 n. A YE-8 1 A YEM-8 1
. 5 n.–0.18 n. A YE-10 1 A YEM-10 1
mm– XE-5M 6 YE-5M 6 XEM-5M 6 YEM-5M 6
. n.–0.25 n. XE-12 1 YE-12 1 XEM-12 1 YEM-12 1
mm– XE-6M 8 YE-6M 8 XEM-6M 8 YEM-6M 8
. 5 n.–0.31 n. XE-16 2 YE-16 2 XEM-16 2 YEM-16 2
. n.–0.37 n. XE-20 2 YE-20 2 XEM-20 2 YEM-20 2
mm– mm XE-8M 10 YE-8M 10 XEM-8M 10 YEM-8M 10
. 7 n.–0.43 n. XE-24 2 YE-24 2 XEM-24 2 YEM-24 2
mm– XE-10M 12 YE-10M 12 XEM-10M 12 YEM-10M 12
. n.–0.50 n. XE-28 3 YE-28 3 XEM-28 3 YEM-28 3
mm – XE-12M 15 YE-12M 15 XEM-12M 15 YEM-12M 15
.5 n.–0.62 n. XE-32 4 YE-32 4 XEM-32 4 YEM-32 4
5 mm– XE-15M 18 YE-15M 18 XEM-15M 18 YEM-15M 18
. n.–0.75 n. XE-40 4 YE-40 4 XEM-40 4 YEM-40 4
mm– XE-18M 21 YE-18M 21 XEM-18M 21 YEM-18M 21
.75 n.–0.82 n. XE-48 5 YE-48 5 XEM-48 5 YEM-48 5
mm– mm XE-21M 24 YE-21M 24 XEM-21M 24 YEM-21M 24
. n.–1. n. XE-56 6 YE-56 6 XEM-56 6 YEM-56 6
tandard Configuration
• 100 kHz–2 MHz• Black plastic body
Working length on X type is per the following
table:
ize range WL
10/12 - 12/16 1.1 in.
16/20 and up .0 in.
ext Page
etec otor
• 50–500 kHz/absolute• Hz–1 MHz/differential• Black plastic body
otor
• 50 kHz–500 kHz• Black plastic body
Working length on Y type is per the following
table:
ize range WL
8/10 1.3 in.
0/12 1.3 in.
12/16–16/20 1.8 in.
0/24 and up 2.0 in.
Adjustable Diameter
Options Add to end of partnumber if other than
tandard
/x.xWL: working length
/x.xOAL: overall length
8/18/2019 Ndteng Olympus
17/60wwww.ndteng.com • [email protected]
Type Adjustable
Y probes have an outer sleeve that allows user to inspect blind holes while taking
dvantage of a screw-type adjustment.
Range of Hole Sizes
etec rotor Physical Acoustics Rotor
A solute A solute Differentia A solute A solute Differentia
X” Type Y” Type X” Type X” Type Y” Type X” Type
.12 n.– .1 n. A YZ-8 1 A A YA-8 1 A
.1 n.– .1 n. A YZ-10 1 A A YA-10 1 A
mm– XZ-5M 6 YZ-5M 6 XZD-5M 6 XA-5M 6 YA-5M 6 XAD-5M 6
.1 n.– .2 n. XZ-12 1 YZ-12 1 XZD-12 1 XA-12 1 YA-12 1 XAD-12 1
mm– XZ-6M 8 YZ-6M 8 XZD-6M 8 XA-6M 8 YA-6M 8 XAD-6M 8
.2 n.– . 1 n. XZ-16 2 YZ-16 2 XZD-16 2 XA-16 2 YA-16 2 XAD-16 2
. 1 n.– . 7 n. XZ-20 2 YZ-20 2 XZD-20 2 XA-20 2 YA-20 2 XAD-20 2mm–1 XZ-8M 10 YZ-8M 10 XZD-8M 10 XA-8M 10 YA-8M 10 XAD-8M 10
. 7 n.– .4 n. XZ-24 2 YZ-24 2 XZD-24 2 XA-24 2 YA-24 2 XAD-24 2
mm– XZ-10M 12 YZ-10M 12 XZD-10M 12 XA-10M 12 YA-10M 12 XAD-10M 12
.4 n.– . n. XZ-28 3 YZ-28 3 XZD-28 3 XA-28 3 YA-28 3 XAD-28 3
mm –1 XZ-12M 15 YZ-12M 15 XZD-12M 15 XA-12M 15 YA-12M 15 XAD-12M 15
. n.– . 2 n. XZ-32 4 YZ-32 4 XZD-32 4 XA-32 4 YA-32 4 XAD-32 4
mm–1 XZ-15M 18 YZ-15M 18 XZD-15M 18 XA-15M 18 YA-15M 18 XAD-15M 18
. 2 n.– .7 n. XZ-40 4 YZ-40 4 XZD-40 4 XA-40 4 YA-40 4 XAD-40 4
mm– XZ-18M 21 YZ-18M 21 XZD-18M 21 XA-18M 21 YA-18M 21 XAD-18M 21
.7 n.– . 2 n. XZ-48 5 YZ-48 5 XZD-48 5 XA-48 5 YA-48 5 XAD-48 5
mm– XZ-21M 24 YZ-21M 24 XZD-21M 24 XA-21M 24 YA-21M 24 XAD-21M 24. 2 n.–1. n. XZ-56 6 YZ-56 6 XZD-56 6 XA-56 6 YA-56 6 XAD-56 6
Options Add to end of partnumber if other than
standard
/x.xWL: working length
/x.xOAL: overall length
Adjustable Diameter
8/18/2019 Ndteng Olympus
18/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Surface Probes
Microdot connector Fischer triax connector
Probe lengtStraight with Microdot Straight with Fischer Triax
1
in. hielde
1
in. nshielde
1
in. hielde
1
in. nshielde. n. -1 P-1 MP-1
. n. -2 P-2 MP-2 TF-2 MTF-2
. n. - P- MP-3 TF- MTF-3
. n. -4 P-4 MP-4 TF-4 MTF-4
. n. - P- MP-5 TF- MTF-5
. n. - P- MP-6 TF- MTF-6
. n. -7 P-7 MP-7 TF-7 MTF-7
. n. - P- MP-8 TF- MTF-8
. n. - P- MP-9 TF- MTF-9
. n. -1 P-1 MP-10 TF-1 MTF-10
1. n. -11 P-11 MP-11 TF-11 MTF-112. n. -12 P-12 MP-12 TF-12 MTF-12
tandard Configuration
Wit Micro ot (T rea e )
• No balance coil• 50 kHz–500 kHz,
200 kHz center frequency
• Stainless steel shaft• Black plastic handle
Wit Fisc er ® Triax (Quic isconnect)
• With balance coil• 50 kHz–500 kHz,
200 kHz center frequency• Stainless steel shaft• Black plastic handle
ext Page
With Microdot (Threaded)
• No balance coil• 0 z–50 z• Stainless steel shaft• Black plastic handle
Wit Fisc er Triax (Quic isconnect)
• With balance coil• 50 kHz–500 kHz• Stainless steel shaft• ac p ast c an e
Straight - Microdot Straight - Fischer® Triax
Options Add to end of partnumber if other thantandard
FX: exible copper shaft
/200K-1M, /1-3M: frequency (MP)
/200K-1M, /1-6M: frequency (MTF)
8/18/2019 Ndteng Olympus
19/60wwww.ndteng.com • [email protected]
Length
1/8 in. tapered plastic tip
Microdot connector Fischer triax connector
ro e engtStraight – Microtip Straight – Plastic Tip
cro ot sc er r ax cro ot sc er r ax
. n. - -1 -- -1 --
. n. - -2 -2 -2 -2
. n. - -3 -3 -3 -3
. n. - -4 -4 -4 -4
. n. -5 -5 -5 -5 -5
. n. - -6 -6 -6 -6
. n. -7 -7 -7 -7 -7
. n. - -8 -8 -8 -8
. n. - -9 -9 -9 -9
. n. - -10 -10 -10 -10
. n. - -11 -11 -11 -11
. n. - -12 -12 -12 -12
Straight - Microtip Straight - Plastic Tip
Options Add to end of partnumber if other thantandard
FX: exible copper shaft
/200K-1M, /1-3M: frequency
O ptions Add to end of partnumber if other thanstandard
/200K-1M, /1-3M: frequency (UP)
/200K-1M, /1-6M: frequency (UTF)
8/18/2019 Ndteng Olympus
20/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Microdot connector Fischer triax connector
ro e engt
Right Angle Tip 0.5 in. Drop
with Microdot
Right Angle Tip 0.5 in. Drop
with Fischer Triax
1 in. hielde 0.072 in. hielde 1 in. hielde 0.072 in. hielde
. n. - 905-3 905-3 905-3 905-3
. n. - 905-4 905-4 905-4 905-4
.5 n. - 5 905-4 905-4 905-4 905-4
. n. -5 905-5 905-5 905-5 905-5
. n. - 905-6 905-6 905-6 905-6
.5 n. - 5 905-6 905-6 905-6 905-6
. n. -7 905-7 905-7 905-7 905-7
. n. - 905-8 905-8 905-8 905-8
. n. - 905-9 905-9 905-9 905-9
. n. - 905-10 905-10 905-10 905-10
. n. - 905-11 905-11 905-11 905-11
. n. - 905-12 905-12 905-12 905-12
tandard Configuration
Wit Micro ot (T rea e )
• No balance coil• 50 kHz–500 kHz
200 kHz center frequency
• Stainless steel shaft• Black plastic handle
Wit Fisc er ® Triaxuic isconnect
• With balance coil• 50 kHz–500 kHz• Stainless steel shaft• ac p ast c an e
Unshielded surface probes are configured by
adding a U to the front of most surface probe
part num er.
Example: UMP905-30
Options Add to end of partnumber if other thantandard
B: bent handle
C: curved angle drop (0.3 in. or greater)
FX: exible copper shaft
/200K-1M, /1-3M: frequency (MP)
/200K-1M, /1-6M: frequency (MTF)
Right Angle Tip 0.5 in. Drop
8/18/2019 Ndteng Olympus
21/60wwww.ndteng.com • [email protected]
Length
Drop length
Microdot connector Fischer triax connector
ro e engt
Right Angle Tip 0.2 in. Drop
wi h Micro o
Right Angle Tip 0.2 in. Drop
wi h Fischer Triax
g t Ange Tp 0.03 n. Drop
cro o
⁄ 1 in. Shielded
sc er Tr ax
⁄ 1 in. Shielded 1
in. hielde
16
n. hielde
1
in. hielde
16
n. hielde. n. - P 2- MP 2- TF 2- MTF 2- P - TF -
. n. -4 P 2-4 MP 2-4 TF 2-4 MTF 2-4 P -4 TF -4
. n. -4 P 2-4 MP 2-4 TF 2-4 MTF 2-4 P -4 TF -4
. n. - P 2- MP 2- TF 2- MTF 2- P - TF -
. n. - P 2- MP 2- TF 2- MTF 2- P - TF -
. n. - P 2- MP 2- TF 2- MTF 2- P - TF -
. n. -7 P 2-7 MP 2-7 TF 2-7 MTF 2-7 P -7 TF -7
. n. - P 2- MP 2- TF 2- MTF 2- P - TF -
. n. - P 2- MP 2- TF 2- MTF 2- P - TF -
. n. -1 P 2-1 MP 2-1 TF 2-1 MTF 2-1 P -1 TF -1
1. n. -11 P 2-11 MP 2-11 TF 2-11 MTF 2-11 P -11 TF -112. n. -12 P 2-12 MP 2-12 TF 2-12 MTF 2-12 P -12 TF -12
Right Angle Tip 0.2 in. Drop Right Angle Tip 0.03 in. Drop
Add to end of partnumber if other thanstandard
B: bent handle
C: curved angle drop (0.3 in. or greater)
FX: exible copper shaft
/200K-1M, /1-3M: frequency (MP)
/200K-1M, /1-6M: frequency (MTF)
8/18/2019 Ndteng Olympus
22/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Microdot connector Fischer triax connector
Note: probes pictured on this page have the curved option
robe Lengt
45º Tp 0. n. Drop 45º Tp 0. n. Drop
Micro o Fischer Triax Micro o Fischer Triax1
in. hielde
1
in. hielde
1
in. hielde
1
in. hielde. n. - P4 - TF4 - P4 - TF4 -
. n. -4 P4 -4 TF4 -4 P4 -4 TF4 -4
. n. -4 P4 -4 TF4 -4 P4 -4 TF4 -4
. n. - P4 - TF4 - P4 - TF4 -
. n. - P4 - TF4 - P4 - TF4 -
. n. - P4 - TF4 - P4 - TF4 -
. n. -7 P4 -7 TF4 -7 P4 -7 TF4 -7
. n. - P4 - TF4 - P4 - TF4 -
. n. - P4 - TF4 - P4 - TF4 -
. n. -1 P4 -1 TF4 -1 P4 -1 TF4 -1
1. n. -11 P4 -11 TF4 -11 P4 -11 TF4 -112. n. -12 P4 -12 TF4 -12 P4 -12 TF4 -12
tandard Configuration
Wit Micro ot (T rea e )
• No balance coil• 50 kHz–500 kHz• Stainless steel shaft
• Black plastic handle
With Fischer ® Triax(Quick disconnect)
• With balance coil• 50 kHz–500 kHz• Stainless steel shaft• Black plastic handle
ext Page
Wit Micro ot (T rea e )
• No balance coil
• 50 kHz–500 kHz• Stainless steel shaft• ac p ast c an e
With Fischer Triax(Quick disconnect)
• With balance coi• 50 kHz–500 kHz• Stainless steel shaft• Black plastic handle
Unshielded surface probes are configured by
adding a U to the front of any surface probe
part number.
xample: UMP905-30
45º Tip (0.5 in. Drop) 45º Tip (0.3 in. Drop)
Add to end of partnumber if other thantandard
B: bent handle
C: curved angle drop (0.3 in. or greater)
FX: exible copper shaft
/200K-1M, /1-3M: frequency (MP)
/200K-1M, /1-6M: frequency (MTF)
8/18/2019 Ndteng Olympus
23/60wwww.ndteng.com • [email protected]
Length
Drop length
1/8 in. or 0.072 in. tip diameter
30º
Fischer triax connector
Note: probes pictured on this page have the curved option
robe Lengt
0º Tp 0. n. Drop
Microdot onnector Fischer Triax onnector Micro o Fischer Triax1
in. hielde
16
n. hielde
1
in. hielde
16
n. hielde
1
in. nshielde
1
in. nshielde. n. - P - MP - TF - MTF - MP305-3 MTF305-3
. n. -4 P -4 MP -4 TF -4 MTF -4 MP305-4 MTF305-4
. n. -4 P -4 MP -4 TF -4 MTF -4 MP305-4 MTF305-4
. n. - P - MP - TF - MTF - MP305-5 MTF305-5
. n. - P - MP - TF - MTF - MP305-6 MTF305-6
. n. - P - MP - TF - MTF - MP305-6 MTF305-6
. n. -7 P -7 MP -7 TF -7 MTF -7 MP305-7 MTF305-7
. n. - P - MP - TF - MTF - MP305-8 MTF305-8
. n. - P - MP - TF - MTF - MP305-9 MTF305-9
. n. -1 P -1 MP -1 TF -1 MTF -1 MP305-10 MTF305-10
1. n. -11 P -11 MP -11 TF -11 MTF -11 MP305-11 MTF305-112. n. -12 P -12 MP -12 TF -12 MTF -12 MP305-12 MTF305-12
30º Tip (0.5 in. Drop)
Options Add to end of partnumber if other thantandard
B: bent handle
C: curved angle drop (0.3 in. or greater)
FX: exible copper shaft
/200K-1M, /1-3M: frequency (MP)
/200K-1M, /1-6M: frequency (MTF)
8/18/2019 Ndteng Olympus
24/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
ractiona etric
Hole Probes
Nonferrous Nonferrous errous
nshielde hielde nshielde
.12 n. 1 ⁄ n. .1 mm DN- D N- DF-
.1 n. ⁄ 2 n. . DN-1 D N-1 DF-1
mm DN-4. D N-4.0 DF-4.
.1 n. ⁄ 6 n. .7 - D N-1 -
mm DN- . D N-5.0 DF- .
DN- . D N-6.0 DF- .
.2 n. 1 n. . DN-1 D N-1 DF-1
DN-7. D N-7.0 DF-7.. 1 n. ⁄ 6 n. . DN-2 D N-2 DF-2
DN- . D N-9.0 DF- .
. 7 n. ⁄ n. . - D N-2 -
DN-11. D N-11.0 DF-11.
.4 n. ⁄ 6 n. 1. DN-2 D N-2 DF-2
. n. 1 ⁄ n. 2. mm DN- D N-3 DF-
DN-1 . D N-13.0 DF-1 .
. n. ⁄ 6 n. 4.2 mm DN- D N-3 DF-
DN-1 . D N-15.0 DF-1 .
. 2 n. ⁄ n. . mm DN-4 D N-4 DF-4
. n. 11
⁄ 6
n. . - D N-4 -.7 n. n. . DN-4 D N-4 DF-4
tandard Configuration
• 2 in. working length• 4 in. overall length• ac p ast c an e
Next Page
Microdot connector • Black plastic tip• Brass shaft• ac p ast c an e
Hole Probes
Options Add to end of partnumber if other thantandard
/x.xWL: working length
Defectometer Probes
8/18/2019 Ndteng Olympus
25/60wwww.ndteng.com • [email protected]
Length
5/32 in. phenolic tipLEMO connector
ro e engt
Surface Probes
onferrous Unshielde onferrous hielde Ferrous Unshielde
traight 90º 0. n. rop traight 90º 0. n. rop traight 90º 0. n. rop
. n. - -2 -- N-2 -- -2 --
. n. - -3 905-3 N-3 N905-3 -3 902-3
. n. - -4 905-4 N-4 N905-4 -4 902-4
. n. -5 -5 905-5 N-5 N905-5 -5 902-5
. n. - -6 905-6 N-6 N905-6 -6 902-6
.5 n. - 5 -6 905-6 N-6 N905-6 -6 902-6
. n. -7 -7 905-7 N-7 N905-7 -7 902-7
. n. - -8 905-8 N-8 N905-8 -8 902-8
. n. - -9 905-9 N-9 N905-9 -9 902-9
. n. - -10 905-10 N-10 N905-10 -10 902-10
. n. - -11 905-11 N-11 N905-11 -11 902-11
. n. - -12 905-12 N-12 N905-12 -12 902-12
Surface Probes
Options Add to end of part
number if other thantandard
/LOO: LEMO connector
8/18/2019 Ndteng Olympus
26/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Low-Frequency Probes
Spot BridgeStandard Configuration
• 2-pin Microdot• ac case• Polished steel
ext Page
• -p n cro ot• Black case• Polished steel
Options Add to end of partnumber if other thantandard
/TF: Fischer triax connector
/4F: Four pin Fischer connector
/4L: Four pin LEMO connector
requency
ange
Spot Bridge
ase art num er
–5 z . 7 n. . 5 n. 013-
–5 z . n. .57 n. 015-
–5 z . 5 n. . n. 018-
–5 z . 5 n. . n. 019-
–5 z . n. . n. 0110-
–5 z . 5 n. . n. 0112-
z– z . 7 n. . n. 023-
z– z . 7 n. .7 n. 026-
z– z . n. . n. 0210-
z– z . 5 n. . n. 042-
z– z . n. . 7 n. 053-
z– z . 7 n. .55 n. 055-
z– z . n. . 7 n. 056-
z– z . n. . 5 n. 102-
z– z . n. . 7 n. 104-
z– z .5 n. .5 n. 105-
z– z . 7 n. . 7 n. 203-
z– z . n. . n. 204-
z– z .5 n. .57 n. 205-
z–2 z . 7 n. . n. 503-
z–2 z . n. . n. 504-
z–2 z .5 n. .57 n. 508-
z–3 z . n. . 5 n. 1002-
z–3 z . n. .5 n. 1005-
z–3 z . n. . n. 1008-
z–5 z . n. . 5 n. 2003-
z–5 z . n. .55 n. 2005-
z–5 z .5 n. .5 n. 1504-
8/18/2019 Ndteng Olympus
27/60
8/18/2019 Ndteng Olympus
28/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
requency
ange
pot Re ection
ase art num er
z– z . 1 n. . 7 n. 013-
z– z . n. . 7 n. 016-
z– z .7 n. .7 n. 017-
z– z . n. . n. 018-
z– z . 2 n. . n. 019-z– z . n. . n. 0110-
z– z . n. .12 n. 0110-
z– z .7 n. . n. 0118-
z– z .44 n. . 2 n. 023-
z– z . n. . n. 028-
z– z . n. .7 n. 036-
z–1 z . 1 n. . n. 053-
z–1 z . 1 n. . 7 n. 053-
z–1 z . n. .4 n. 054-
z–1 z . n. . 7 n. 055-
z–1 z . 1 n. .7 n. 057-z–1 z . 1 n. . 7 n. 203-
z–1 z .42 n. .4 n. 204-
z–1 z .4 n. . n. 204-
z–1 z . n. . n. 205-
Hz–2 z . n. . n. 093-
Hz–2 z . n. .42 n. 093-
Hz– z . 2 n. .42 n. 503-
Hz– z .4 n. . 2 n. 504-
Hz– z . n. . n. 508-
Hz– z . 2 n. .42 n. 803-
Hz–1 z . 7 n. . n. 1005-Hz–1 z . n. .1 n. 1010-
Spot ReflectionStandard Configuration
• 2-pin Microdot• ac case• Polished steel
ext Page
• -p n cro ot• Black case• Polished steel
Options Add to end of partnumber if other thantandard
/TF: Fischer triax connector
/4F: Four pin Fischer connector
/4L: Four pin LEMO connector
8/18/2019 Ndteng Olympus
29/60wwww.ndteng.com • [email protected]
IDOD
2-pin Microdot
requency Ring Reflection
art num er
z– z . n. . n. 018-
z– z .5 n. . n. 0110-
z– z . n. . n. 0112-
z– z .7 n. . n. 0113-
z– z . n. . n. 0114-
z– z . n. .5 n. 0115-
z– z . n. . n. 0116-
z– z . 5 n. .75 n. 017-
z– z .5 n. . n. 019-
z– z . n. . n. 0110-
z– z . n. .5 n. 0115-
z– z . n. . 5 n. 0115-
z– z . n. .7 n. 0119-
z– z . n. . 7 n. 0120-
z– z . 5 n. . n. 026-
z– z . n. .7 n. 028-
z– z . n. .75 n. 027-
z– z .5 n. . 5 n. 0210-
z– z .5 n. . n. 0211-
z–1 z . n. . n. 056-
z–1 z . n. . n. 058-
z–1 z . n. .75 n. 057-
z–2 z . 5 n. . 5 n. 206-
z–2 z . 5 n. .7 n. 207-
z–2 z . n. . n. 207-
z–8 z . n. . n. 1006-
z–8 z . 5 n. . n. 1009-
z–10 z . n. .55 n. 2007-
Ring Reflection
ptions Add to end of partnumber if other thanstandard
/TF: Fischer triax connector
/4F: Four pin Fischer connector
/4L: Four pin LEMO connector
8/18/2019 Ndteng Olympus
30/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Miscellaneous Probes
A
B
ype A
B C
A
Type B
Sliding ProbesStandard Configuration
Type A
• 2-pin Microdot• ac p eno c case• Tridirectional scan
• 1 in. diameter
Type
• 2 ea. 1-pin Microdot• Black Delrin case• Single-direction scan• Acrylic spacer
ype art um er requency
Sliding Probes
mens onsonnector
405- z– z . n. . n. -p n cro ot
1007- – z . n. . n. -p n cro ot
1004- – z . n. . n. -p n cro ot
1004- – z . n. . n. -p n cro ot
0419- z– z . n. . n. .7 n. 2 1-pin Microdot
201 z–1 z . n. .7 n. . n. 2 1-pin Microdot
0423- z–1 z . n. .7 n. . n. 2 1-pin Microdot
5010- – z . n. . n. . n. 2 1-pin Microdot
0210- – z . n. . n. . n. 2 1-pin Microdot
0210- –5 z . n. . n. . n. 2 1-pin Microdot
102 – z . n. .5 n. .7 n. 2 1-pin Microdot
Options Add to end of partnumber if other thantandard
/TF: Fischer triax connector
/4F: Four pin Fischer connector
8/18/2019 Ndteng Olympus
31/60wwww.ndteng.com • [email protected]
NDT Engineering Corp. can supply wheel probes and re erence standards or the most popular aircra t in service. Please have aircra tmake, model, and wheel manufacture when you talk to our sales staff for availability. If we do not carry what you are looking for, allwe need is a sample of the wheel in question; either a section cut from the wheel or a full wheel. Customer is responsible for returnshipping costs i they want the wheel returned in same condition as receive
Wheel Probes Wheel Standards
ircrafWheel Probes Wheel Standards
ain Nose Tail ain Nose Tail
- - -717 -717
- - -727 -727
37 100-20 P-737M 100-20 P-737N 100-20 -737M 100-20 -737N 100-20
- - -747 -747
7 P-7 7 P-7 7 -757 -757
7 P-7 7 P-7 7 -767 -767
2 P-A 2 P-A 2 -A320 -A320-9 3 P-D 9M 3 P-D 9N 3 -D 9M 3 -D 9
-1 P-D 10 P-D 10 -D 10 -D 10
D-80 eries P-MD P-MD -MD80 -MD80
ash P-DH M- 2 P-DH -DH8M-32 -DH8
-13 P-K 135 P-K 135 -K 135 -K 135
-13 P- 130 P- 130 - 130 - 130
- P-B 2 P-B 2 -B52 -B52
-15C Eagle, F-15D Eagle P-F15 D P-F15 D -F15 D -F15 D
-15E Strike Eagle P-F1 E P-F1 E -F15E -F15W
-1 P-F1 P-F1 -F16 -F16
-1 P-A1 P-A1 -A10 -A10H-6 P- H60 P- H60 - H60 - H60
8/18/2019 Ndteng Olympus
32/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
traight type - Top view
Angle type - Side view
traight finger probe
1.0 in.
ngth
Drop
Ø
1.0 in.
Angle finger probe
Finger
Part Num er ngle Drop Tip LengtTPF- . n.
TPF- . n. --
TPF- . n.
TPF- . n. --
TPF- . n.
TPF-4 4 . n. --
TPF-4 4 . n.
TPF- Straight . n.
TPF- Straight . n.
TPF- Straight . n.
TPF- Straight . n.TPF-1 Straight 1. n.
Blade Finger
Blade
art num er Angle c ness
.045-60 traight . 5 n.
.060-60 traight . n.
.090-60 traight . n.
90.045-60 . 5 n.
90.060-60 . n.
90.090-60 . n.
45.045-60 5 . 5 n.
45.060-60 5 . n.
45.090-60 5 . n.
30.045-60 . 5 n.
30.060-60 . n.
30.090-60 . n.
8/18/2019 Ndteng Olympus
33/60wwww.ndteng.com • [email protected]
The part numbers listed below are configured with 2-pin Microdot
connectors. To configure for Fischer® triax connector, refer to the
c art e ow.
Part numbers listed have a length of 6 in. Other lengths are configured by
adding the desired length, in inches or millimeters, to the end of the part
num er.
Example: BPU-16/FX8
• 1 ⁄ 1 in. diameter
n. wor ng engt
Spring Loaded
art Num er ange
N 375-2.5L 500 kHz– z
N 375-2.5L 200 – z
N 375-2.5L 50 –1 z
N 375-2.5L 20 – z
N 375-2.5L 10 – z
N 375-2.5L 5 –1 z
N 375-2.5L 2 –1 z
N 375-2.5L 1 – zN 375-2.5L 50 z z– z
Spring Loaded Flexshaft
Flexshaft
nstrument r ver art um er
n versa otor BPU-10 FX1
oerster otor BDP-10 FX
Elotest tandard Rotor BPE-10 FX
otest n otor BPEM-10 FX
ec otor BPRA-10 FX
P 5 Rotor P 5-10 FX
etec otor BPZ-10 FX
izes listed are based on standard measurement of 1 ⁄ 4 in. increments.
or examp e: -10=1 ⁄ 4 , ⁄ 2. or m meters, su st tute w t metr c s zes.Example: BPRA-11M/FX203M
Options Add to end of partnumber if other thantandard
/TF: Fischer triax connector
8/18/2019 Ndteng Olympus
34/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Cables and Adapters
Rotary AdaptorsReference Coil Adapters and Cables
InstrumentProbe Connector
Reference Coil Adaptors (BNC) icro o ischer oax
Zetec MIZ-10, MIZ-20, MIZ-2 Z-M-6 50-500 Z- F-6 - AZ-BN -
Zetec MIZ-2 Z21-M-6 - Z21- F-6 - AZ21-BN -
Nortec NDT-18, NDT-19, NDT-23, NDT-2 BR-M-6 - BR- F-6 - ABR-BN -
Nortec 1000, 200 N16-M-6 - N16- F-6 - AN16-BN -
Hocking Phasec 1.1, AV-10, AV10 H-M-6 - H- F-6 - AH-BN -
Hocking Phasec 2, 220 H22-M-6 - H22- F-6 - AH22-BN -
Foerster Defectoscope SD 2.832, AF 2.83 D-M-6 - D- F-6 - AD-BN -
Elotest B1, B A B1-M-6 - A B1- F-6 - AB1-BN -* ther lengths are available.
Reference coil adapters are used with manuallyoperated, single-coil probes such as the MP-
type surface probes or the BPM-type manual
bolt hole probes and must be used with a
BM-type cable.
Ask for cable CBM-6 when placing an order.
Probe Connection
niversa oerster echi PElotes
tandar
Elotest Min Zetec
niversal Rotor -- RA - RA -R RA -P RA - RA -E R -
Foerster Rotor RAD- - RAD-P - - -
Rechii Rotor RARA- - -- RARA-P - - -
P 5 Rotor RAP5- RAP - RAP -R RAP - RAP -E RP -
Elotest tandard Rotor RAE- - - RAE-P -- - -
Elotest Mini Rotor RAEM- - - RAEM-P - -
Zetec Rotor RAZ- - - RAZ-P - - --
Physical Acoustics Rotor RAA- - RAA-P - - -
* For Hocking Phasec 1.1 Rotor and Elotest Mini-Rotor
8/18/2019 Ndteng Olympus
35/60wwww.ndteng.com • [email protected]
Bridge Cables and Adapters
nstrumenProbe connector
-Pin Micro ot Fischer Triax 4-pin Fischer Dual Micro ot
etec MIZ-10, MIZ-20, and MIZ-2 Z-2M- Z-TF- Z-4F- Z-M E-etec MIZ-2 Z21-2M- Z21-TF- Z21-4F- Z21-M E-
ortec NDT-18, NDT-19, NDT-23, and NDT-24 BR-2M- BR-TF- BR-4F- BR-M E-
ortec 1 an 2 N16-2M- N16-TF- N16-4F- N16-M E-
ocking Phasec 1.1, AV-10, and AV10 H-2M- H-TF- H-4F- H-M E-
ocking Phasec 2, 220 H22-2M- H22-TF- H22-4F- H22-M E-
oerster Defectoscope SD 2.832, AF 2.83 F D-2M- F D-TF- F D-4F- F D-M E-
lotest B1 an B B1-2M- B1-TF- B1-4F- B1-M E-
D Tech mni can MX E -2M- -TF- -4F- -MFE-
* Can be used on Nortec 1000 and 2000 with 8-pin adaptor.
nstrument Cable Connector IZ-1 - DT-1 DT-1 hasec 1.1 hasec 22
etec MIZ-10, MIZ-20, and MIZ-2 -- - - Z-N1 - -
etec MIZ-2 - - Z21-N1 - -
ortec NDT-18, 19, 23, and 2 - - -- BR-N1 - -
ortec NDT-1000, 200 N1 - N1 -Z2 N1 -B N1 - N1 -H2
ocking Phasec 1.1, AV-10, and AV-10 - - - H-N1 -- -
ocking Phasec 2, 220 - - H22-N1 -
oerster Defectoscope SD 2.832, AF.
F D- F D-Z2 F D-B F D-N1 F D- F D-H2
lotest B1 an B - - - B1-N1 - -
D Tech mni can MX E - -Z2 -B -N1 - -H2* Includes probe connections for those under instrument list.
-
8/18/2019 Ndteng Olympus
36/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Reflection Cables and Adapters
-
nstrumentProbe Connector
- n cro ot sc er r ax 4- n sc er ua cro ot
etec -10, -20, an -2 Z-2M- Z-TF- Z-4F- Z-M E-
etec -2 Z21-2M- Z21-TF- Z21-4F- Z21-M E-
ortec -18, 19, 23, an 24 RBR-2M- RBR-TF- RBR-4F- RBR-M E-
ortec 1000 an 200 RN16-2M- RN16-TF- RN16-4F- RN16-M E-
oc ng asec 1.1, -10, 10 RH-2M- RH-TF- RH-4F- RH-M E-
oc ng asec 2, 220 RH22-2M- RH22-TF- RH22-4F- RH22-M E-
oerster De ectoscope RF D-2M- RF D-TF- RF D-4F- RF D-M E-
otest 1 an B1-2M- B1-TF- B1-4F- B1-M E-
D Tech mni can MX E R -2M- R -TF- R -4F- R -M E-
* Can be used on Nortec 1000 and 2000 with 8-pin adaptor.
nstrumentCable Connector
IZ-1 - DT-1 DT-1 hasec 1.1 hasec 22
etec MIZ-10, MIZ-20, and MIZ-2 - - RZ-N1 - -
etec MIZ-2 - -- - RZ21-N1 - -
ortec NDT-18, 19, 23, and 2 - - RBR-N1 - -
ortec NDT-1000, 200 RN1 - RN1 -Z2 RN1 -B -- RN1 - RN1 -H2
ocking Phasec 1.1, AV-10, and AV-10 - - - RH-N1 -
ocking Phasec 2, 220 - - RH22-N1 - --
oerster Defectoscope RF D- RF D-Z2 RF D-B RF D-N1 RF D- RF D-H2
lotest B1 an B - - - RB1-N1 - -
D Tech mni can MX E R - R -Z2 R -B R -N1 R - R -H2* ncludes probe connections for those under instrument list
8/18/2019 Ndteng Olympus
37/60wwww.ndteng.com • [email protected]
Hole Probes Surface Probes Low-frequency Probes
art um er ontents art um er ontents art um er ontents
-1064-38 pro es
⁄ 2 n. t roug 1. n.n 1 ⁄ 2 n. ncrements
--30, 902-40
P905-50B, MP455-50PF-902, BM-
-
803-1, L 203-1,058-1, 019-1,0112-
ables as require
-1064- 8 pro es
⁄32 n. t roug 1. n. n ⁄32 n. ncrements
- -5 p us:
-50, 905-5 -
-7 p us:0419-1, 058-
-1048-30 BPU probes ⁄32 n. through 3⁄ n. n ⁄32 n. increments
-PK-7 plus:
-60 , 9003-50 ,BM-
-1
FK-7 plus:S2003-1, LR0115-TW1004-1, LTW1007-ables as require
-1040 pro es cover ngole sizes from 5⁄3 n. to ⁄4 n.
-1
-9 p us:PF-30, MP902-50 ,P305-50
902-60 , 9003-0, BM-
Probe KitsHole Probes
Surface Probes
Low-Frequency Probes
8/18/2019 Ndteng Olympus
38/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Ultrasound Products
Ordering InformationQuality of workmanship takes priority at NDT Engineering Corporation. Components and materials used in the manufacture of ourtransducers are checked to ensure that they comply with NDT Engineering Corporation specifications. Attention is paid to every aspectof design, production, and assembly of all NDT Engineering Corporation transducers.
The transducer is one of the most critical components of any ultrasonic system. A great deal of attention should be paid to selecting theproper transducer for the application. Consideration should be given to the use of focused transducers, transducers with wear surfacesthat are appropriate for the test material, and the choice of the appropriate frequency and element diameter.
While these guidelines are quite useful, each application is unique and performance will be dependent on transducer configuration,frequency, and element diameter. The summaries below provide a general impression of the characteristics of each transducer seriesfound in this section of the catalog.
Transducer Series DescriptionSUC Contact transducers
SCD and SCDR Delay line transducers
SUD and SUDR Dual element transducersSX 0.187 in. element shear wave transducers
SUSM 0.187 in. element shear wave transducers
SUM 0.250 in. element shear wave transducers
SU and S 0.375 in. and 0.500 in. element shear wave transducers
SCT and SCW Quickfit™ shear wave transducers and wedges
SUI and SUSI Immersion transducers
Except for our line of standard contact transducers (SUC) found on page 37, all transducers follow a specific numbering format that iseasy to use in selecting both the proper transducer from this catalog and the design of special requirement transducers.
SUI 10 37
Frequency
Element size
SX 5 45 A S
Transducerseries
Frequency Angle Materialprojected
Connectorposition
Transducerseries
Part Number SX 545AS (page 40)0.187 in. shear wave transducer5 MHz frequency45º in aluminumSide-mounted Microdot
Part Number SUI 1037 (page 45)Standard immersion transducer10 MHz frequency0.375 in. element
8/18/2019 Ndteng Olympus
39/60wwww.ndteng.com • [email protected]
Contact TransducersStandard
Element imensionsart Num er
requency iameter
. z . 7 n. . 2 n. . n. 157-
. z . n. . n. . 2 n. 17
. z .7 n. . n. . n. 15
. z . n. .1 n. .2 n. 15
.2 z .2 n. .4 n. . n. 16
.2 z . 1 n. .4 n. . n. 161-
.2 z . 7 n. . 2 n. . n. 16
.2 z . n. . n. . 2 n. 16
.2 z .7 n. . n. . n. 15
.2 z . n. .12 n. .2 n. 15
.2 z .12 n. .27 n. .2 n. 23
. z .1 n. .2 n. . n. 166-1
. z .1 n. .2 n. . n. 166-1A
. z .1 n. . 1 n. . n. 166-1
. z .2 n. . 7 n. .4 n. 169
. z .2 n. . 7 n. . n. 166
. z .2 n. . 7 n. .7 n. 706
. z .2 n. . 7 n. .2 n. 166-3
. z . 1 n. .4 n. . n. 166-
. z . 1 n. . 2 n. . n. 16
. z . 7 n. . 2 n. . 2 n. 16
. z . n. . 2 n. . 2 n. 47
. z .7 n. . n. . n. 16
. z .1 n. .2 n. .4 n. 168-1A
. z .1 n. . 1 n. . n. 168-1
. z .2 n. . 1 n. .4 n. 168B
. z .2 n. . n. .4 n. 168A
. z .2 n. . 7 n. . n. 168
. z .2 n. . 7 n. .7 n. 726
. z . 1 n. .4 n. . n. 168-
. z . 7 n. . 2 n. . n. 16
. z . n. . n. . n. 167-
. z . n. . n. . 2 n. 167-
. z .12 n. .1 n. . n. 185
. z .12 n. .2 n. .4 n. 180*
* mooth no-knurle grip.
** This transducer also has a 6-ft BNC cable attached.
8/18/2019 Ndteng Olympus
40/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Delay Line
requency Element izeermanent De ay L ne ep acea e De ay L ne
art um er ameter e g art um er ameter e g
. z .5 n. D 15 . n. . 5 n. DR 15 . n. . n.
. z . 5 n. D 22 . 7 n. . n. DR 22 .57 n. .5 n.
. z . 7 n. D 23 .5 n. . n. DR 23 .75 n. .75 n.
. z .5 n. D 25 . n. . 5 n. DR 25 . n. . n.
. z . 5 n. D 52 . 7 n. . n. DR 52 .57 n. .5 n.
. z . 7 n. D 53 .5 n. . n. DR 53 .75 n. .75 n.
. z .5 n. D 55 . n. . 5 n. DR 55 . n. . n.
. z .75 n. D 57 . n. .7 n. DR 57 . 5 n. . 5 n.
. z . n. D 510 . 5 n. . n. DR 510 .5 n. . n.
. z . n. D 101 . n. . n. DR 101 . n. . n.
. z . 5 n. D 102 . 7 n. . n. DR 102 .57 n. .5 n.
. z . 7 n. D 103 .5 n. . n. DR 103 .75 n. .75 n.
. z .5 n. D 105 . n. . 5 n. DR 105 . n. . n.
5. z . n. D 151 . n. . n. DR 151 . n. . n.
5. z . 5 n. D 152 . 7 n. . n. DR 152 .57 n. .5 n.
5. z . 7 n. D 153 .5 n. . n. DR 153 .75 n. .75 n.
5. z .5 n. D 155 . n. . 5 n. DR 155 . n. . n.
– z . n. D 201 . n. . n. DR 201 . n. . n.
– z . 5 n. D 202 . 7 n. . n. DR 202 .57 n. .5 n.
– z . 7 n. D 203 .5 n. . n. DR 203 .75 n. .75 n.
8/18/2019 Ndteng Olympus
41/60wwww.ndteng.com • [email protected]
Dual Element - Cylindrical
Dual Element Cylindrical Contact Transducers
Element imensionsart Num er
requency iameter
. z .2 n. . 7 n. . n. D 12
. z . 1 n. .4 n. . 7 n. D 13
. z . 7 n. . n. . 2 n. D 13
. z . n. . 2 n. .7 n. D 15
.2 z .2 n. . 7 n. . n. D 22
.2 z . 1 n. .4 n. . 7 n. D 23
.2 z . 7 n. . n. . 2 n. D 23
.2 z . n. . 2 n. .7 n. D 25
. z .2 n. . 7 n. . n. D 52
. z . 1 n. .4 n. . 7 n. D 53
. z . 7 n. . n. . 2 n. D 53
. z . n. . 2 n. .7 n. D 55
. z .2 n. . 7 n. . n. D 102
. z . 1 n. .4 n. . 7 n. D 103
. z . 7 n. . n. . 2 n. D 103
. z . n. . 2 n. .7 n. D 105
. z .2 n. . 7 n. . n. D 152
. z . 1 n. .42 n. . 7 n. D 153
. z . 7 n. . n. . 2 n. D 153
. z . n. . 2 n. .7 n. D 155
8/18/2019 Ndteng Olympus
42/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Shear Wave TransducersMicro Miniature
op mount connectoride mount connector
emenMicro Miniature with Side Mount Connector Micro Miniature with Top Mount Connector
art um er art um er
requency ng e um num tee um num tee
. z 5 X 235A X 235 X 235A X 235
. z 5 X 245A X 245 X 245A X 245
. z 60 X 260A X 260 X 260A X 260
. z 70 X 270A X 270 X 270A X 270
. z 5 X 535A X 535 X 535A X 535
. z 5 X 545A X 545 X 545A X 545
. z 0 X 560A X 560 X 560A X 560
. z 70 X 570A X 570 X 570A X 570
. z 5 X 1035A X 1035 X 1035A X 1035
. z 5 X 1045A X 1045 X 1045A X 1045
. z 0 X 1060A X 1060 X 1060A X 1060
. z 70 X 1070A X 1070 X 1070A X 1070
8/18/2019 Ndteng Olympus
43/60wwww.ndteng.com • [email protected]
ElementSubminiature with Side Mount Connector Subminiature with Top Mount Connector
art Num er art Num er
requency Angle luminum tee luminum tee
.2 z 5˚ M 235A M 235 M 235A M 235
.2 z ˚ M 245A M 245 M 245A M 245
.2 z 60˚ M 260A M 260 M 260A M 260
.2 z ˚ M 270A M 270 M 270A M 270
.2 z 0˚ M 290A M 290 M 290A M 290
. z ˚ M 535A M 535 M 535A M 535
. z 5˚ M 545A M 545 M 545A M 545
. z ˚ M 560A M 560 M 560A M 560
. z 70˚ M 570A M 570 M 570A M 570
. z ˚ M 590A M 590 M 590A M 590
. z 5˚ M 1035A M 1035 M 1035A M 1035
. z ˚ M 1045A M 1045 M 1045A M 1045
. z 60˚ M 1060A M 1060 M 1060A M 1060
. z 70˚ M 1070A M 1070 M 1070A M 1070
. z ˚ M 1090A M 1090 M 1090A M 1090
Subminiature
Top mount connector ide mount connector
8/18/2019 Ndteng Olympus
44/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
ElementMiniature with Side Mount Connector Miniature with Top Mount Connector
art Num er art Num er
requency Angle luminum tee luminum tee
.2 z º M 235A M 235 M 235A M 235
.2 z º M 245A M 245 M 245A M 245
.2 z º M 260A M 260 M 260A M 260
.2 z º M 270A M 270 M 270A M 270
.2 z º M 290A M 290 M 290A M 290
. z º M 535A M 535 M 535A M 535
. z º M 545A M 545 M 545A M 545
. z º M 560A M 560 M 560A M 560
. z º M 570A M 570 M 570A M 570
. z º M 590A M 590 M 590A M 590
. z º M 1035A M 1035 M 1035A M 1035
. z º M 1045A M 1045 M 1045A M 1045
. z º M 1060A M 1060 M 1060A M 1060
. z º M 1070A M 1070 M 1070A M 1070
. z º M 1090A M 1090 M 1090A M 1090
Miniature
ide mount connector Top mount connector
8/18/2019 Ndteng Olympus
45/60wwww.ndteng.com • [email protected]
1.25 in. 0.625 in.
0.750 in.
1.000 in. 0.500 in.
0.625 in.
To configure with top mount connector, replace “S” at the end of part number with a “T”.
Element
Shear Wave Transducers
. 7 in. Element . in. Element
art num er art num er
requency Angle luminum tee luminum tee
.2 z 5˚ 235A 235 235A 235
.2 z ˚ 245A 245 245A 245
.2 z 60˚ 260A 260 260A 260
.2 z ˚ 270A 270 270A 270
.2 z 0˚ 290A 290 290A 290
. z ˚ 535A 535 535A 535
. z 5˚ 545A 545 545A 545
. z ˚ 560A 560 560A 560
. z 70˚ 570A 570 570A 570
. z ˚ 590A 590 590A 590
. z 5˚ 1035A 1035 1035A 1035
. z ˚ 1045A 1045 1045A 1045
. z 60˚ 1060A 1060 1060A 1060
. z 70˚ 1070A 1070 1070A 1070
. z ˚ 1090A 1090 1090A 1090
0.375 in. Element 0.500 in. Element
8/18/2019 Ndteng Olympus
46/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
SwiftChange™ Transducers and Wedges
C
BA
Standard
with top mount connector
Microdot
Frequency lemen
ize
SwiftChange ™
rans ucers
Standard with Top
Mount onnector
Part Num er
1. z .2 n. T 12
1. z . 7 n. T 13
1. z . n. T 15
2.2 z .2 in. T 22
2.2 z . 7 n. T 23
2.2 z . n. T 25
. z .2 n. T 52
. z . 7 n. T 53
. z . n. T 55
1 . z .2 n. T 102
1 . z . 7 n. T 103
1 . z . n. T 105
hear Angle
Wedge for ⁄ 1 in. Elementrans ucer
Wedge for ⁄ in. Elementrans ucer
Wedge for ⁄ 1 in. Elementrans ucer
art Num er art Num er art Num er
luminum tee luminum tee luminum tee
30˚ T-25-30 T-25-30 T-37-30 T-37-30 T-50-30 T-50-30
˚ T-25-35 T-25-35 T-25-35 T-25-35 T-25-35 T-25-35
40˚ T-25-40 T-25-40 T-25-40 T-25-40 T-25-40 T-25-40
˚ T-25-45 T-25-45 T-25-45 T-25-45 T-25-45 T-25-45
50˚ T-25-50 T-25-50 T-25-50 T-25-50 T-25-50 T-25-50
˚ T-25-60 T-25-60 T-25-60 T-25-60 T-25-60 T-25-60
70˚ T-25-70 T-25-70 T-25-70 T-25-70 T-25-70 T-25-70
80˚ T-25-80 T-25-80 T-25-80 T-25-80 T-25-80 T-25-80 ˚ T-25-90 T-25-90 T-25-90 T-25-90 T-25-90 T-25-90
edge Dimensions (in in.
lement
size
efracte
angle
.250 n. 5 . .5
. .
7 . 7 .5
. .. 7 in. 4 . 1 .
. .
7 .2 .
. .7
.500 n. 5 . .
. .7
7 . .
. .7
8/18/2019 Ndteng Olympus
47/60wwww.ndteng.com • [email protected]
Immersion Transducers
Standard and Slim-Line
requency tandard Immersion Transducers
.1 n. Element .2 n. Element . 7 n. Element . n. Element
. z I 11 I 12 I 13 I 15
.2 z I 21 I 22 I 23 I 25
. z I 51 I 52 I 53 I 55
. z I 101 I 102 I 103 I 105
. z I 151 I 152 I 153 I 155
–2 z I 201 I 202 I 203 I 205
Slim-line Immersion Transducers
.1 n. ement . 5 n. ement
. z U I 11 U I 12
. z U I 21 U I 22
. z U I 51 U I 52
. z U I 101 U I 102
5. z U I 151 U I 152
– z U I 201 U I 202
8/18/2019 Ndteng Olympus
48/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Cables, Kits, and Miscellaneous UT Accessories
DT Engineering Corporation remains highlyedicated to its position as a leading providerf custom made UT kits, which include certified
transducers, reference standards, and guides.his means that we can work with you on any
special pro ect at no additional cost until a wora le solution has een achieve .n addition to providing guides and positionersor all ma or airplane manufacturers, we have
also been responsible for projects on the militaryaircraft listed in the following table:
Cables and Extensions Custom Kits and Guides
Cables and extensions
escr pt on art um er engt
6 ft BN to Microdot BM- f
12 ft BN to Microdot BM-1 t15 ft BN to Microdot BM-1 ft
6 ft BNC to right-angle Microdot BMR- ft
12 ft BN to right-angle Microdot BMR-1 2 t
15 ft BN to right-angle Microdot BMR-1 5 t
6 ft BN to BN BB- t
12 ft BN to BN BB-1 2
6 ft miniature Microdot to BN BMM- ft
6 ft dual BN s to dual Microdots 2BM-M E- ft
6 ft dual BNCs to 2-pin Microdot 2BN-2M- ft
1 in. female Microdot to male right-angle Microdot AMF-MR-1 in.
in. emale Microdot to male Microdot - -1 0 n.
8/18/2019 Ndteng Olympus
49/60wwww.ndteng.com • [email protected]
Waveform Analysis Frequency Spectrum Analysis
Beam Profile
Note: Certification is a method to show transducer performance. Please refer to the inspection procedure for the proper instru-ment setup for your inspection.
Approved techniques and instrumentation are used to supply waveform, damping factor, frequency spectrum, and beam profiles. Cus-tomers requiring certification of transducers should specify the type of certification, as described below, when ordering.
Certification Level 1
• Certificate of conformance by letter
Certification Level 2
• Waveform analysis
• Frequency spectrum analysis
Transducer Certification
8/18/2019 Ndteng Olympus
50/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Roller Probes, Yokes, and Gimbals
Roller probe yokes, though limited in application, o er the considerable advantage o eliminating the inconvenience o water requiredwith jet yokes. The design of the roller probe yokes has been extensively improved to meet US Air Force requirements. The current de-sign is unique in that it provides constant roller probe contact pressure and alignment throughout inspection of widely varying materialthicknesses up to the limits o the yoke opening.
Roller probe yokes are shipped with two cables BNC to right-angle Microdot number CBMR-12 (see page ). Roller probes and gim-bals are separate unless purchased as part o a kit.
ypeRoller Probe Yokes
art um er roat engt roat t
o er pro e yo e on y -242 4 n. 0–20 n.
-322 2 n. 0–20 n.
-362 6 n. 0–20 n.
-402 0 n. 0–30 n.
-482 8 n. 0–30 n.
o er pro e yo e ts -242 4 n. 0–20 n.
-322 2 n. 0–20 n.
-402 0 n. 0–30 n.
art Num er requency Element ize
R-58 . z . 7 n. × . n.
R-58 . z . 7 n. × .7 n.
R-58 .2 z . 7 n. × . n.
R-58 .2 z . 7 n. × .7 n.
R-58 . z . 7 n. × . n.R-58 . z . 7 n. × .7 n.
Part Num er Description
A-58 Fits all DCR roller probes and RPTW roller probe
yokes.
8/18/2019 Ndteng Olympus
51/60wwww.ndteng.com • [email protected]
Waterjet Yokes, Nozzles, and Nozzle Transducers
ype
Waterjet Yoke
art um er roat engt hroat apozzle ap
Approximate
Fixed length and widt TW-12 n. in. n.
TW-24 n. in. n.
JTW-30 30 n. 8 n. n.
JTW-36 36 n. 8 n. n.
JTW-42 42 n. 8 n. n.
ar a e engt an w t JTWX-14 1 14 n. usts to 10 n. n.
TWX-30 1 in. Ad usts to 14 in. n.
TWX-40 1 4 in. Ad usts to 17 in. n.
Handheld waterjet yokes, also called wands, provide a simple, cost-e ective means o inspecting composites and bonded structures.Although the most common application is for the inspection of small parts and details not easily or efficiently inspected with the largescanning systems, field inspection of installed structures can be performed as well.
Yokes are supplied with two nozzles (JTN 1.5 × 0.75 —nozzles and two CBMR-12 cables (cables found on page ).
Transducers are designed to fit all nozzles. They are interchangeable, and frequencies ranging from 0.5 MHz to 5.0 MHz are available.The most commonly used requency or TTU applications is 1.0 MHz.
Nozzles
art um ermens ons ep acement p
art um ere g ameter
TN-501 xxx 1. n. . n. I-501 xxx
- . n. . 5 n. -
JTN-70V xxx . n. . n. JI-70V xxx
PTIONS:/xxx is required inside the diameter of nozzle tip in choices of 0.125 in.,.187 in. and 0.250 in.
Nozzle Transducers
art um er requency ement ameter
A4-.5 . . z . in.
A4-1.0 . . z . in.
A4-2.25 . . 5 z .5 n.
A4-5.0 . . z .5 n.
8/18/2019 Ndteng Olympus
52/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857
Aircraft StandardsReference Standards
Boeing
rcra t eries Part Numbers
oe ng 70 ee NT
oe ng 72 ee NT
oe ng 73 ee NT
oe ng 74 ee NT
oe ng 75 ee NT
oe ng 76 ee NT
oe ng 77 ee NT
Note: Manufacturers continually add new reference standard numbers. Please
contact our sales department for updated lists.
Other Manufacturers
NDT Engineering Corporation can manufacture reference standards for any aircraft manu-acturer. Due to low demand we don’t carry
ull maintaince manuals on these aircra t.
Drawings may e require to ensure youreceive the most current revision.
Airbus
rcra t eries Part Numbers
r us 30 ee A300 NT
r us 300-60 ee A300-600 NT
r us 31 ee A310 NT
r us 318, 319, 320, 32 ee A318 NTM, A319 NTM, A320 NTM, and A321 NT
r us 32 ee A320 NT
r us 33 ee A330 NT
r us 34 ee A340 NT
* Each series is nonspecific and found in the NDI Manuals for all aircraft listed.
Note: Manufacturers continually add new reference standard numbers.
ease contact our sa es epartment or up ate sts.
essna
Em raer
Fairchil
Falcon
Fokkerulfst
Top Related