Ndteng Olympus

8/18/2019 Ndteng Olympus

1/60

Product Catalo

• Eddy Current Probes

• Ultrasonic Transducers

• Engine Probes

• EC and UT Reference Standards

920-087


2/60

• Eddy current probes

• Ultrasonic transducers

• Engine probes

• EC and UT referencestandards

• Probe kits

• TTU equipment for graphite

and bonded structures

• Connecting cables and

adapters

• Probes and tooling for

restricted access and precise

positioning

• Repair services

• Full service EDM notching for

reference standards

NDT Engineering Corporation19620 Russell Rd.Kent, WA 98032USATelephone: (1) (253) 872-3565Fax: (1) (253) 872-0857

www.ndteng.com

[email protected]

Olympus NDTOlympus NDT is a leading global manufac-turer of innovative nondestructive testinginstruments that are used in industrial andresearch applications ranging from aero-space, energy, automotive, and electronicsto manufacturing. Olympus NDT instru-ments contribute to the quality of products

and add to the safety of infrastructureand facilities. They include flaw detectors,thickness gages, bond testers, pulser-receiv-ers, transducers, and advanced systemsfor inline applications. Our leading edgetechnologies include ultrasound, ultrasound phased array, eddy current, and eddy cur-rent array.

Olympus NDT offers products and ser-vices from several high quality brands: R/DTech® , Panametrics-NDT ™ , NDT Engineer-ing, Sonic® , and Nortec® . For many decades

these brands have earned excellent reputa-tions for providing cost-effective solutionsand excellent support and customer service.

Based in Waltham, Massachusetts, USA, thecompany has sales and service centers inall principal industrial locations worldwide.Visit www.olympusNDT.com for applica-tions and sales assistance near you.

NDT Engineering Corporation

NDT Engineering Corporation, a subsidiary ofOlympus NDT inc., is one of the world’s largestdesigner, manufacturer, and marketer of probes

and transducers for EC and UT inspection. Ourproducts include eddy current probes, ultra-sonic transducers, engine probes, and referencestandards in addition to the full service capabili-ties of EDM and repair services. Our productscan be found in commercial, commuter, andmilitary aircraft NDT documents.

NDT Engineering offers over 10,000 standardand custom-designed EC probes, UT transduc-ers, reference standards, and accessory itemsfor virtually every application. This catalog is arepresentative sample of our total product line.For applications that require a nonstandard

product, we proudly offer the most compre-hensive custom probe and application servicesavailable anywhere.


3/60

Table of ContentsIntroduction..................................................iiOlympus NDT ...............................................ii

NDT Engineering Corporation ............................ ii

General Information..................................... 2

Eddy Current Products .............................. 3

Ordering Information................................... 3Bolt Hole Probe Sizing Chart ...................... 4Bolt Hole Probes ......................................... 5

Universal Rotor....................................................5Foerster Rotor ..................................................... 5Nortec Rechii Rotor.............................................6Nortec PS5 Rotor................................................6Zetec® Rotor........................................................7Elotest Standard Rotor........................................8Elotest Mini Rotor................................................8Rotary Countersink .............................................9Manual Standard ..............................................10

Manual Countersink .......................................... 11Manual for Locator UHB ................................... 11 Adjustable Diameter.......................................... 12 Adjustable Diameter.......................................... 13 Adjustable Diameter.......................................... 14 Adjustable Diameter.......................................... 15

Surface Probes.......................................... 16Straight - Microdot............................................ 16Straight - Fischer® Triax.....................................16Straight - Microtip ............................................. 17Straight - Plastic Tip..........................................17Right Angle Tip 0.5 in. Drop .............................. 18

Right Angle Tip 0.2 in. Drop .............................. 19Right Angle Tip 0.03 in. Drop ............................ 1945º Tip (0.5 in. Drop)..........................................2045º Tip (0.3 in. Drop)..........................................2030º Tip (0.5 in. Drop)..........................................21

Defectometer Probes................................ 22Hole Probes ......................................................22Surface Probes..................................................23

Low-Frequency Probes............................. 24Spot Bridge ....................................................... 24Ring Bridge........................................................25Spot Reection..................................................26

Ring Reection..................................................27Miscellaneous Probes............................... 28Sliding Probes ................................................... 28Wheel Probes.................................................... 29Wheel Standards...............................................29Blade ................................................................. 30Finger ................................................................30Spring Loaded...................................................31Flexshaft............................................................31

Cables and Adapters................................. 32Reference Coil Adapters and Cables................32Rotary Adaptors ................................................ 32

Bridge Cables and Adapters ............................ 33Reection Cables and Adapters .......................34

Probe Kits .................................................. 35Hole Probes.......................................................35Surface Probes..................................................35Low-Frequency Probes.....................................35

Ultrasound Products................................ 36

Ordering Information................................. 36Contact Transducers................................. 37Standard............................................................37Delay Line..........................................................38Dual Element - Cylindrical.................................39

Shear Wave Transducers .......................... 40Micro Miniature..................................................40Subminiature ..................................................... 41Miniature............................................................420.375 in. Element...............................................430.500 in. Element...............................................43SwiftChange™ Transducers and Wedges .......... 44

Immersion Transducers............................. 45Standard and Slim-Line.....................................45Cables, Kits, and MiscellaneousUT Accessories.......................................... 46

Cables and Extensions......................................46Custom Kits and Guides ................................... 46Transducer Certification .................................... 47Roller Probes, Yokes, and Gimbals...................48Waterjet Yokes, Nozzles, andNozzle Transducers...........................................49

Reference Standards................................. 50 Aircraft Standards ............................................. 50

Hole Standards..................................................51Surface Standards.............................................51Ultrasonic Standards.........................................52Composite Standards ....................................... 53

Technical Notes ........................................ 54Eddy Current Tutorial andProbe Selection Information ..................... 54Probe Types and Their Usage................... 56Troubleshooting......................................... 57Legal Notices............................................. 58Disclaimer.................................................. 58Legal Notices............................................. 59Disclaimer.................................................. 59


4/60

NDT EngineeringWe Would Like to Help You!

• By continuing to develop solutions concerning inspection requirements for commercial and military

aircraft.

• By solving your eddy current and ultrasonic inspection problems.

• By meeting your aircraft on ground (AOG) or other on time delivery requirements.

• By shipping you quality products that are backed by a lifetime guarantee against manufacturingdefects.

• By providing no-cost, quality, technical support by phone, fax, or e-mail.

General Information

Fast Delivery

Because we know that fast delivery is important for most of ourcustomers, we work very hard to meet or exceed all deliveryrequirements. Whether it is an AOG or some other urgent require-ment and that our customer must have it by a specific date, thatdelivery will become our very highest priority.

The Best Quality and Service

As with any company, the day-to-day capability lays with itsemployees, and we are fortunate to have outstanding talentswith experience dating back to the early days of EC and UTimplementation in the 1950s. We also boast major upgrades andimprovements in both equipment and personnel to our EDMshop and our quality control. We are now able to facilitate all ofour customer needs while maintaining the strictest of controls onthe quality of our products. This enables us to quickly serve themarketplace with products of exceptional quality and value. NDTEngineering’s commitment to providing the very best customerservice is evidenced by ongoing investments in manufacturing

technology and productivity-enhancing equipment.New Products

Numerous products are not included in this catalog as we areconstantly developing new probes and transducers to solveproblems for an ever-changing industry. To that end, we havedeveloped a team of highly qualified individuals who are at yourdisposal, ready to design and manufacture a solution for yournext problem. So, if what you are looking for is not in this cata-log, call us and we will get you what you need.

Repair Services

NDT Engineering will replace defective probes or transducer fromany manufacturer at a repair cost:

Eddy current probes

Engine probes

UT transducers

Adapters

Cable assemblies

TTU equipmentWe guarantee to return repaired items in like-new condition withnew product warranty at a price of 15% to 40% below the cost ofnew. Cost depends on the extent of repair and replacement partsrequired. Items can be submitted for a price quote prior to repair,but if the customer decides against repair, the cost of return ship-

ping will be the responsibility of the customer.

Warranty

All items sold by Olympus NDT under the NDT Engineeringbrand are warranted against manufacturing defects. Wear, dam-age, misuse, and corrosion are not covered by warranty. War-ranty length is per the following table:

Items Warranty Length

EC Probes Lifetime

UT Transducers Six (6) months

Adapters Lifetime

Reference Standards Lifetime

All items returned under warranty must reference an RMA num-ber (returned material authorization), which must be requestedfrom our office and visibly written on returned goods packaging.

If it is determined that wear, damage, or corrosion is due to faultymaterials or design, the item will be replaced at no charge. War-ranted items will be repaired to like new condition or replaced asdetermined by NDT Engineering. These items will have a full war-ranty starting at the date the customer receives the returned item.

The customer will pay shipping and duty costs as applicable, andthen ship the item to:

NDT Engineering Corporation19620 Russell Road, Kent, WA 98032USA

NDT Engineering will pay return shipping costs via the most eco-nomical means that have a shipping period of less that 10 days.Shipping period is defined as the length of time in transit betweenthe departure from our plant and the arrival at destination. Thisexcludes delays such as customs in the destination country.


5/60

Eddy Current Products

Ordering InformationThe basic part numbers found in this catalog follow a logical, easy to use, numbering format; however, when adding options, it isimportant to remember the three following rules:

1. Every item in this catalog begins with a letter or letters that relate to its corresponding product such

as ”BP” for bolt hole probe, ”MP”for micro (surface) probe, etc.

2. Letters are then followed by a set of numbers that signify either a hole size, length, OD, or angle and

drop length (in the case of surface probes), etc.

3. Option letters are added at the end of the basic part number to designate special inspection

requirements or user requirements (see following lists).

Option list 1 – without slash (placed after basic part number on surface probes)

FX 1⁄8 in. diameter flexible shaft

B bent shaft convenient handle

C curved angle drop (offered on all angled surface probes 0.30 in. drop or longer)

Option list 2 – with slash (placed after basic part number or any option from list 1)

/SE spread-end tip

/SS stainless steel body

/TF Fischer® triax connector

/4F 4-pin Fischer connector

/7L Staveley PowerLink™

/200K-1M 500 kHz center frequency

/1-3M 2 MHz center frequency for MP

/1-6M 2 MHz center frequency for MTF only

/x.xWL working length in inches

/x.xMWL working length in millimeters

/x.xOAL overall length in inches

/x.xMOAL overall length in millimeters

With these options in mind, part numbers can be built as shown in the examples below.

MP905-50FX/1-3M BPU-5.0M/SS/50MWL LR017-1/TF

Basic part number:

Shielded surface probe with a rightangle 1 ⁄ 2 in. drop and a 5 in. length.

Basic part number:

Universal rotary bolt hole probewith a 5 mm diameter.

Basic part number:

Low-frequency, bridge type ringprobe center frequency at 100 Hzand an OD of 0.7 in.

Options:

FX: flexible copper shaft/1-3M: center frequency 2 MHz

Options:

/SS: stainless steel/50MWL: 50 mm working length

Options:

/TF: Fischer triax connector

Note: not all options are available for all products


6/60

Bolt Hole Probe Sizing Chart

Size 8 9 10 11 12 13 14 15 16 17

Head

diameter

1 ⁄ 8 in. 9 ⁄ 64 in. 5 ⁄ 32 in. 11 ⁄ 64 in. 3 ⁄ 16 in. 13 ⁄ 64 in. 7 ⁄ 32 in. 15 ⁄ 64 in. 1 ⁄ 4 in. 17 ⁄ 64 in.

0.125 0.140 0.156 0.171 0.187 0.203 0.218 0.234 0.250 0.265

3.18 mm 3.57 mm 3.97 mm 4.37 mm 4.76 mm 5.16 mm 5.56 mm 5.95 mm 6.35 mm 6.75 mmSize 18 19 20 21 22 23 24 25 26 27

Head

diameter


0.281 0.296 0.312 0.328 0.343 0.359 0.375 0.390 0.406 0.421

7.14 mm 7.54 mm 7.94 mm 8.33 mm 8.73 mm 9.13 mm 9.52 mm 9.92 mm 10.32 mm 10.72 mm

Size 28 29 30 31 32 33 34 35 36 37

Head

diameter


0.437 0.453 0.468 0.484 0.500 0.515 0.531 0.546 0.562 0.578


Size 38 39 40 41 42 43 44 45 46 47

Head

diameter


0.593 0.609 0.625 0.640 0.656 0.671 0.687 0.703 0.718 0.734


Size 48 49 50 51 52 53 54 55 56 57

Head

diameter


0.750 0.765 0.781 0.793 0.812 0.828 0.843 0.859 0.875 0.890


Size 58 59 60 61 62 63 64 68 72 76

Head

diameter

29 ⁄ 32 in. 59 ⁄ 64 in. 15 ⁄ 16 in. 61 ⁄ 64 in. 31 ⁄ 32 in. 63 ⁄ 64 in. 1 1 1 ⁄ 16 in. 1 1 ⁄ 8 in. 1 3 ⁄ 16 in.

0.906 0.921 0.937 0.953 0.968 0.984 1 1.062 1.125 1.187


Size 80 84 88 92 96 104 112 120 128 136

Head

diameter

1 1 ⁄ 4 in. 1 5 ⁄ 16 in. 1 3 ⁄ 8 in. 1 7 ⁄ 16 in. 1 1 ⁄ 2 1 5 ⁄ 8 in. 1 3 ⁄ 4 in. 1 7 ⁄ 8 in. 2.00 2 1 ⁄ 8 in.

1.250 1.312 1.375 1.437 1.500 1.625 1.750 1.875 2.00 2.125


Size 144 152 160 168 176 184 192

Head

diameter

2 1 ⁄ 4 in. 2 3 ⁄ 8 in. 2 1 ⁄ 2 2 5 ⁄ 8 in. 2 3 ⁄ 4 in. 2 7 ⁄ 8 in. 3.0

2.250 2.375 2.500 2.625 2.750 2.875 3.00

57.15 mm 60.33 mm 63.5 mm 66.68 mm 69.85 mm 73.03 mm 76.2 mm


7/60wwww.ndteng.com • [email protected]

Bolt Hole Probes

Hole size Universal Rotor Foerster Rotor

ecima Fractiona Metric nshielde hielde nshielde hielde

.12 n. 1 ⁄ n. .1 BP - N BPD- N

.1 n. 2 n. . BP -1 BP F-1 BPD-1 BPDF-1

BP -4.0 BP F-4.0 BPD-4. BPDF-4.

.1 n. 3 6 n. 4.7 BP -1 BP F-1 - -

BP -5.0 BP F-5.0 BPD- . BPDF- .

BP -6.0 BP F-6.0 BPD- . BPDF- .

.2 n. 1 ⁄ n. . BP -1 BP F-1 BPD-1 BPDF-1

BP -7.0 BP F-7.0 BPD-7. BPDF-7.

. 1 n. ⁄ 6 n. 7. BP -2 BP F-2 BPD-2 BPDF-2

BP -9.0 BP F-9.0 BPD- . BPDF- .

. 7 n. ⁄ n. . mm BP -2 BP F-2 - -

BP -11.0 BP F-11.0 BPD-11. BPDF-11.

.4 n. 7 ⁄ 6 n. 11. mm BP -2 BP F-2 BPD-2 BPDF-2

. n. 1 ⁄ n. 12. BP -3 BP F-3 BPD- BPDF-

1 mm BP -13.0 BP F-13.0 BPD-1 . BPDF-1 .

. n. ⁄ 6 n. 14.2 BP -3 BP F-3 BPD- BPDF-

1 BP -15.0 BP F-15.0 BPD-1 . BPDF-1 .

. 2 n. ⁄ n. 1 . BP -4 BP F-4 BPD-4 BPDF-4

. n. 11 6 n. . BP -4 BP F-4 - -

.7 n. ⁄ n. 1 . BP -4 BP F-4 BPD-4 BPDF-4The universal rotor is suitable for the following rotary guns: Hocking mini drive, Rohmann mini-rotor, Nortec MiniMite (with 4-pin Fischer) and Spitfire 2000, Uniwest

R scanner and Zetec Z -4 high speed scanner.

Standard Configuration

Universa Rotor

• 100 kHz–2 MHz• Black plastic body

Foerster Rotor • z– z• Black plastic body

ext Page

Rechii Rotor

• kHz–2 MHz• ac p ast c o y

Working length for Rechii rotor is per

the following table:

ize range WL

Less then -18 1.1 in.

-18 or greater 1.5 in.

-18/SE or greater .0 in.

Universa , Foerster anPS5 Rotor


Working length is per the ollowing table:

ize range WL

8–15 1.1 in.

16–64 .0 in.

Universal Rotor Foerster Rotor

Options Add to end of partnumber if other thanstandard

/SE: spread end

/SS: stainless steel

/x.xWL: working length

/x.xOAL: overall length


8/60NDT Engineering • Tel. 1-253-872-3565 • Fax 1-253-872-0857

o e s ze Nor ec Rec Ro or or ec P 5 Ro or

ec ma ract ona etr c ns e e hielde ns e e hielde

. n. 1 ⁄ n. . - A 5- A

. 5 n. ⁄ 2 n. . -1 -1 5-1 5F-1

-4.0 -4.0 5-4.0 5F-4.0

. n. ⁄ 6 n. .7 -1 -1 5-1 5F-1

-5.0 -5.0 5-5.0 5F-5.0

-6.0 -6.0 5-6.0 5F-6.0

. 5 n. 1 ⁄ n. . mm -1 -1 5-1 5F-1

-7.0 -7.0 5-7.0 5F-7.0

. n. ⁄ 6 n. . mm -2 -2 5-2 5F-2

-9.0 -9.0 5-9.0 5F-9.0

. 7 n. ⁄ n. .5 mm -2 -2 5-2 5F-2

-11.0 -11.0 5-11.0 5F-11.0

. n. 7 6 n. . -2 -2 5-2 5F-2

.5 n. 1 ⁄ n. . -3 -3 5-3 5F-3

-13.0 -13.0 5-13.0 5F-13.0

.5 n. ⁄ 6 n. . -3 -3 5-3 5F-3

5 -15.0 -15.0 5-15.0 5F-15.0

. n. ⁄ n. 5. -4 -4 5-4 5F-4

. n. 11 ⁄ 6 n. 7. -4 -4 5-4 5F-4

.75 n. ⁄ n. . -4 -4 5-4 5F-4

Nortec Rechii RotorRA 19, RA 2000, or MiniMite (with 4-pin LEMO)

Nortec PS5 Rotor

Options Add to end of partnumber if other thantandard

/SE: spread end






Zetec® Rotor

o e s zeZetec Rotor

so ute erent a


. n. 1 ⁄ n. . A - A

. 5 n. ⁄ 2 n. . -1 -1 -1 -1

-4.0 -4.0 -4.0 -4.0

. n. ⁄ 6 n. .7 -1 -1 -1 -1

-5.0 -5.0 -5.0 -5.0

-6.0 -6.0 -6.0 -6.0

. 5 n 1 ⁄ n. . mm -1 -1 -1 -1

-7.0 -7.0 -7.0 -7.0

. n. ⁄ 6 n. . mm -2 -2 -2 -2

-9.0 -9.0 -9.0 -9.0

. 7 n. ⁄ n. .5 mm -2 -2 -2 -2

-11.0 -11.0 -11.0 -11.0

. n. 7 6 n. . -2 -2 -2 -2

.5 n. 1 ⁄ n. . -3 -3 -3 -3

-13.0 -13.0 -13.0 -13.0

.5 n. ⁄ 6 n. . -3 -3 -3 -3

5 -15.0 -15.0 -15.0 -15.0

. n. ⁄ n. 5. -4 -4 -4 -4

. n. 11 ⁄ 6 n. 7. -4 -4 -4 -4

.75 n. ⁄ n. . -4 -4 -4 -4


Zetec Rotor

• Frequency: see chart• ac p ast c o y

Next Page

Elotest Standard Rotor

• 100 kHz–2 MHz• ac p ast c o y

Elotest Mini Rotor


Working length is per the ollowing table:

Size range WL

–15 1.1 in.

16–64 2.0 in.

Options Stan ar requency Add to end of partnumber if other thantandard

/SE: spread end Absolute probe: 50 kHz–500 kHz

/SS: stainless steel Differential probe: 300 kHz–1 MHz





Elotest Standard RotorRohmann SR1, SR2

Elotest Mini RotorRohmann SMR4, MR3

o e s ze Elo es an ar Ro or o es M n Ro or


. n. 1 ⁄ n. . - A - A

. 5 n. ⁄ 2 n. . -1 -1 -1 -1

-4.0 -4.0 -4.0 -4.0

. n. ⁄ 6 n. .7 -1 -1 -1 -1

-5.0 -5.0 -5.0 -5.0

-6.0 -6.0 -6.0 -6.0

. 5 n 1 ⁄ n. . mm -1 -1 -1 -1

-7.0 -7.0 -7.0 -7.0

. n. ⁄ 6 n. . mm -2 -2 -2 -2

-9.0 -9.0 -9.0 -9.0

. 7 n. 3 ⁄ n. .5 mm -2 -2 -2 -2

-11.0 -11.0 -11.0 -11.0

. n. 6 n. . -2 -2 -2 -2

.5 n. 1 ⁄ n. . -3 -3 -3 -3

-13.0 -13.0 -13.0 -13.0

.5 n. ⁄ 6 n. . -3 -3 -3 -3

5 -15.0 -15.0 -15.0 -15.0

. n. ⁄ n. 5. -4 -4 -4 -4

. n. 11 ⁄ 6 n. 7. -4 -4 -4 -4

.75 n. 3 ⁄ n. . -4 -4 -4 -4


/SE: spread end






ole sizen versa Rotor otest M n Rotor etec otor Rec Rotor

Decima ractiona etric

.12 n. 1 ⁄ n. .1 100- EM100- Z100- RA100-

.1 n. ⁄ 2 n. . 100-1 EM100-1 Z100-1 RA100-1

mm 100-4.0 EM100-4.0 Z100-4.0 RA100-4.0

.1 n. ⁄ 6 n. .7 100-1 EM100-1 Z100-1 RA100-1

mm 100-5.0 EM100-5.0 Z100-5.0 RA100-5.0

100-6.0 EM100-6.0 Z100-6.0 RA100-6.0

.2 n. 1 ⁄ n. . mm 100-1 EM100-1 Z100-1 RA100-1

100-7.0 EM100-7.0 Z100-7.0 RA100-7.0. 1 n. 6 n. . 100-2 EM100-2 Z100-2 RA100-2

100-9.0 EM100-9.0 Z100-9.0 RA100-9.0

. 7 n. ⁄ n. . 100-2 EM100-2 Z100-2 RA100-2

100-11.0 EM100-11.0 Z100-11.0 RA100-11.0

.4 n. ⁄ 6 n. 1. 100-2 EM100-2 Z100-2 RA100-2

. n. 1 ⁄ n. 2. 100-3 EM100-3 Z100-3 RA100-3

100-13.0 EM100-13.0 Z100-13.0 RA100-13.0

. n. ⁄ 6 n. 4.2 mm 100-3 EM100-3 Z100-3 RA100-3

100-15.0 EM100-15.0 Z100-15.0 RA100-15.0

. 2 n. ⁄ n. . mm 100-4 EM100-4 Z100-4 RA100-4

. n. 11

⁄ 6

n. . 100-4 EM100-4 Z100-4 RA100-4.7 n. ⁄ n. . mm 100-4 EM100-4 Z100-4 RA100-4

Rotary Countersink

ptions Overall length Add to end of partnumber if other thanstandard

/SS: stainless steel Universal rotor: 2.5 in.

/x.xWL: working length Mini rotor: 2.125 in.

/x.xOAL: overall length Zetec rotor: 2.225 in.

Other angles are available by replacing the “100” with the

required countersink angle in the part numberRechii rotor: 2.0 in.

Foerster rotor: 2.2 in.



Manual Standard

o e s zeManual Standard

–5 z z– z


. n. ⁄ 1 n. . - A PM-8 200K-1 A

. 5 n. ⁄ 2 n. . -1 -1 PM-10 200K-1 PMF-10 200K-1

-4.0 -4.0 PM-4.0M 200K-1 PMF-4.0M 200K-1

. n. ⁄ 6 n. .7 -1 -1 PM-12 200K-1 PMF-12 200K-1

-5.0 -5.0 PM-5.0M 200K-1 PMF-5.0M 200K-1

-6.0 -6.0 PM-6.0M 200K-1 PMF-6.0M 200K-1

. 5 n. ⁄ 1 n. . mm -1 -1 PM-16 200K-1 PMF-16 200K-1

-7.0 -7.0 PM-7.0M 200K-1 PMF-7.0M 200K-1

. n. ⁄ 6 n. . mm -2 -2 PM-20 200K-1 PMF-20 200K-1

-9.0 -9.0 PM-9.0M 200K-1 PMF-9.0M 200K-1

. 7 n. ⁄ n. .5 mm -2 -2 PM-24 200K-1 PMF-24 200K-1

-11.0 -11.0 PM-11.0M 200K-1 PMF-11.0M 200K-1

. n. 6 n. . -2 -2 PM-28 200K-1 PMF-28 200K-1

.5 n. ⁄ 1 n. . -3 -3 PM-32 200K-1 PMF-32 200K-1

-13.0 -13.0 PM-13.0M 200K-1 PMF-13.0M 200K-1

.5 n. ⁄ 6 n. . -3 -3 PM-36 200K-1 PMF-36 200K-1

5 -15.0 -15.0 PM-15.0M 200K-1 PMF-15.0M 200K-1

. n. ⁄ n. 5. -4 -4 PM-40 200K-1 PMF-40 200K-1

. n. 11 ⁄ 6 n. 7. -4 -4 PM-44 200K-1 PMF-44 200K-1

.75 n. ⁄ n. . -4 -4 PM-48 200K-1 PMF-48 200K-1


Manua Stan ar(Compatible with Hockinglocator at 200 kHz)

• z– z,

200 kHz center frequency• Black plastic body

ext Page

Manual Countersink

• 100˚ Countersink• 2 in. overall length• 50 kHz–500 kHz• Black plastic body

Manual for Locator UHB

• 500 kHz or 6 MHz• ac p ast c o y

Working length is per the following table:

ize range WL

–15 1.1 in.

16–64 2.0 in.


/200K-1M, /1-3M: frequency





Manual for Locator UHBManual Countersink

o e s ze Manual oun ersin Manual for Loca or H


. n. 1 ⁄ n. . M100- A LM-8 500 A

. 5 n. ⁄ 2 n. . M100-1 MF100-1 LM-10 500 LMF-10 500

M100-4.0 MF100-4.0 LM-4.0M 500 LMF-4.0M 500

. n. ⁄ 6 n. .7 M100-1 MF100-1 LM-12 500 LMF-12 500

M100-5.0 MF100-5.0 LM-5.0M 500 LMF-5.0M 500

M100-6.0 MF100-6.0 LM-6.0M 500 LMF-6.0M 500

. 5 n. 1 ⁄ n. . mm M100-1 MF100-1 LM-16 500 LMF-16 500

M100-7.0 MF100-7.0 LM-7.0M 500 LMF-7.0M 500

. n. ⁄ 6 n. . mm M100-2 MF100-2 LM-20 500 LMF-20 500

M100-9.0 MF100-9.0 LM-9.0M 500 LMF-9.0M 500

. 7 n. ⁄ n. .5 mm M100-2 MF100-2 LM-24 500 LMF-24 500

M100-11.0 MF100-11.0 LM-11.0M 500 LMF-11.0M 500

. n. 6 n. . M100-2 MF100-2 LM-28 500 LMF-28 500

.5 n. 1 ⁄ n. . M100-3 MF100-3 LM-32 500 LMF-32 500

M100-13.0 MF100-13.0 LM-13.0M 500 LMF-13.0M 500

.5 n. ⁄ 6 n. . M100-3 MF100-3 LM-36 500 LMF-36 500

5 M100-15.0 MF100-15.0 LM-15.0M 500 LMF-15.0M 500

. n. ⁄ n. 5. M100-4 MF100-4 LM-40 500 LMF-40 500

. n. 11 ⁄ 6 n. 7. M100-4 MF100-4 LM-44 500 LMF-44 500

.75 n. ⁄ n. . M100-4 MF100-4 LM-48 500 LMF-48 500


/500K or /6M: frequency







Adjustable Diameter

Range of Hole izesStandard Manual Universal Rotor

ype ype ype ype

. n.–0.15 n. A A A YU-8 1

. 5 n.–0.18 n. A A A YU-10 1

mm– XM-5M 6 A XU-5M 6 YU-5M 6

. n.–0.25 n. XM-12 1 A XU-12 1 YU-12 1

mm– XM-6M 8 A XU-6M 8 YU-6M 8

. 5 n.–0.31 n. XM-16 2 A XU-16 2 YU-16 2

. n.–0.37 n. XM-20 2 A XU-20 2 YU-20 2

mm– mm XM-8M 10 A XU-8M 10 YU-8M 10

. 7 n.–0.43 n. XM-24 2 A XU-24 2 YU-24 2

mm– mm XM-10M 12 A XU-10M 12 YU-10M 12

. n.–0.50 n. XM-28 3 A XU-28 3 YU-28 3

mm– XM-12M 15 A XU-12M 15 YU-12M 15

.5 n.–0.62 n. XM-32 4 A XU-32 4 YU-32 4

5 mm– XM-15M 18 A XU-15M 18 YU-15M 18

. n.–0.75 n. XM-40 4 A XU-40 4 YU-40 4

mm– BXM-18M/21M N/A XU-18M 21 YU-18M 21

.75 n.–0.82 n. XM-48 5 A XU-48 5 YU-48 5

mm– XM-21M 24 A XU-21M 24 YU-21M 24

. n.–1. n. XM-56 6 A XU-56 6 YU-56 6

Drawings or this item are on next page

tandard Configuration

Standard Manual

• kHz–5 kHz,00 kHz center requency

• Black plastic body

Universal Rotor


Next Page

X type adjustable

orking length on X type is

per the following table:

ize range WL

10/12–12/16 1.1 in.

16/20 and up 2.0 in.

Y type adjustable

or ng engt on type s

per the following table:

ize range WL

8/10 1.3 in.

0/12 1.3 in.

12/16–16/20 1.8 in.

0/24 and up 2.0 in.







X probes have a thumbscrew that allows user to adjust coil

away rom rough-sur ace holes and is excellent or oversized

holes.

X Type Adjustable

Y Type Adjustable

probes have an outer sleeve that allows user to inspect blind holes

hile taking advantage of a screw-type adjustment.

Range of Hole izesFoerster Rotor Rechii Rotor PS5 Rotor

ype ype ype ype ype ype

. n.–0.15 n. A YD-8 1 A YRA-8 1 A Y5-8 1

. 5 n.–0.18 n. A YD-10 1 A YRA-10 1 A Y5-10 1

mm– XD-5M 6 YD-5M 6 XRA-5M 6 YRA-5M 6 X5-5M 6 Y5-5M 6

. n.–0.25 n. XD-12 1 YD-12 1 XRA-12 1 YRA-12 1 X5-12 1 Y5-12 1


. 5 n.–0.31 n. XD-16 2 YD-16 2 XRA-16 2 YRA-16 2 X5-16 2 Y5-16 2

. n.–0.37 n. XD-20 2 YD-20 2 XRA-20 2 YRA-20 2 X5-20 2 Y5-20 2

mm– mm XD-8M 10 YD-8M 10 XRA-8M 10 YRA-8M 10 X5-8M 10 Y5-8M 10

. 7 n.–0.43 n. XD-24 2 YD-24 2 XRA-24 2 YRA-24 2 X5-24 2 Y5-24 2

mm– mm XD-10M 12 YD-10M 12 XRA-10M 12 YRA-10M 12 X5-10M 12 Y5-10M 12

. n.–0.50 n. XD-28 3 YD-28 3 XRA-28 3 YRA-28 3 X5-28 3 Y5-28 3


.5 n.–0.62 n. XD-32 4 YD-32 4 XRA-32 4 YRA-32 4 X5-32 4 Y5-32 4

5 mm– XD-15M 18 YD-15M 18 XRA-15M 18 YRA-15M 18 X5-15M 18 Y5-15M 18

. n.–0.75 n. XD-40 4 YD-40 4 XRA-40 4 YRA-40 4 X5-40 4 Y5-40 4


.75 n.–0.82 n. XD-48 5 YD-48 5 XRA-48 5 YRA-48 5 X5-48 5 Y5-48 5


. n.–1. n. XD-56 6 YD-56 6 XRA-56 6 YRA-56 6 X5-56 6 Y5-56 6




Adjustable Diameter



ype Adjustable

X probes have a thumbscrew that allows user to adjust coil away from rough-surface

holes and is excellent for oversized holes.

Range of Hole izesElotest Standard Rotor Elotest Mini Rotor

ype ype ype ype

. n.–0.15 n. A YE-8 1 A YEM-8 1

. 5 n.–0.18 n. A YE-10 1 A YEM-10 1

mm– XE-5M 6 YE-5M 6 XEM-5M 6 YEM-5M 6

. n.–0.25 n. XE-12 1 YE-12 1 XEM-12 1 YEM-12 1


. 5 n.–0.31 n. XE-16 2 YE-16 2 XEM-16 2 YEM-16 2

. n.–0.37 n. XE-20 2 YE-20 2 XEM-20 2 YEM-20 2

mm– mm XE-8M 10 YE-8M 10 XEM-8M 10 YEM-8M 10

. 7 n.–0.43 n. XE-24 2 YE-24 2 XEM-24 2 YEM-24 2


. n.–0.50 n. XE-28 3 YE-28 3 XEM-28 3 YEM-28 3

mm – XE-12M 15 YE-12M 15 XEM-12M 15 YEM-12M 15

.5 n.–0.62 n. XE-32 4 YE-32 4 XEM-32 4 YEM-32 4

5 mm– XE-15M 18 YE-15M 18 XEM-15M 18 YEM-15M 18

. n.–0.75 n. XE-40 4 YE-40 4 XEM-40 4 YEM-40 4


.75 n.–0.82 n. XE-48 5 YE-48 5 XEM-48 5 YEM-48 5

mm– mm XE-21M 24 YE-21M 24 XEM-21M 24 YEM-21M 24

. n.–1. n. XE-56 6 YE-56 6 XEM-56 6 YEM-56 6



Working length on X type is per the following

table:

ize range WL

10/12 - 12/16 1.1 in.

16/20 and up .0 in.

ext Page

etec otor

• 50–500 kHz/absolute• Hz–1 MHz/differential• Black plastic body

otor

• 50 kHz–500 kHz• Black plastic body

Working length on Y type is per the following

table:

ize range WL

8/10 1.3 in.

0/12 1.3 in.

12/16–16/20 1.8 in.

0/24 and up 2.0 in.

Adjustable Diameter

Options Add to end of partnumber if other than

tandard





Type Adjustable

Y probes have an outer sleeve that allows user to inspect blind holes while taking

dvantage of a screw-type adjustment.

Range of Hole Sizes

etec rotor Physical Acoustics Rotor

A solute A solute Differentia A solute A solute Differentia

X” Type Y” Type X” Type X” Type Y” Type X” Type

.12 n.– .1 n. A YZ-8 1 A A YA-8 1 A

.1 n.– .1 n. A YZ-10 1 A A YA-10 1 A

mm– XZ-5M 6 YZ-5M 6 XZD-5M 6 XA-5M 6 YA-5M 6 XAD-5M 6

.1 n.– .2 n. XZ-12 1 YZ-12 1 XZD-12 1 XA-12 1 YA-12 1 XAD-12 1


.2 n.– . 1 n. XZ-16 2 YZ-16 2 XZD-16 2 XA-16 2 YA-16 2 XAD-16 2

. 1 n.– . 7 n. XZ-20 2 YZ-20 2 XZD-20 2 XA-20 2 YA-20 2 XAD-20 2mm–1 XZ-8M 10 YZ-8M 10 XZD-8M 10 XA-8M 10 YA-8M 10 XAD-8M 10

. 7 n.– .4 n. XZ-24 2 YZ-24 2 XZD-24 2 XA-24 2 YA-24 2 XAD-24 2


.4 n.– . n. XZ-28 3 YZ-28 3 XZD-28 3 XA-28 3 YA-28 3 XAD-28 3

mm –1 XZ-12M 15 YZ-12M 15 XZD-12M 15 XA-12M 15 YA-12M 15 XAD-12M 15

. n.– . 2 n. XZ-32 4 YZ-32 4 XZD-32 4 XA-32 4 YA-32 4 XAD-32 4

mm–1 XZ-15M 18 YZ-15M 18 XZD-15M 18 XA-15M 18 YA-15M 18 XAD-15M 18

. 2 n.– .7 n. XZ-40 4 YZ-40 4 XZD-40 4 XA-40 4 YA-40 4 XAD-40 4


.7 n.– . 2 n. XZ-48 5 YZ-48 5 XZD-48 5 XA-48 5 YA-48 5 XAD-48 5

mm– XZ-21M 24 YZ-21M 24 XZD-21M 24 XA-21M 24 YA-21M 24 XAD-21M 24. 2 n.–1. n. XZ-56 6 YZ-56 6 XZD-56 6 XA-56 6 YA-56 6 XAD-56 6

Options Add to end of partnumber if other than

standard



Adjustable Diameter



Surface Probes

Microdot connector Fischer triax connector

Probe lengtStraight with Microdot Straight with Fischer Triax

1

in. hielde

1

in. nshielde

1

in. hielde

1

in. nshielde. n. -1 P-1 MP-1

. n. -2 P-2 MP-2 TF-2 MTF-2

. n. - P- MP-3 TF- MTF-3

. n. -4 P-4 MP-4 TF-4 MTF-4

. n. - P- MP-5 TF- MTF-5

. n. - P- MP-6 TF- MTF-6

. n. -7 P-7 MP-7 TF-7 MTF-7

. n. - P- MP-8 TF- MTF-8

. n. - P- MP-9 TF- MTF-9

. n. -1 P-1 MP-10 TF-1 MTF-10

1. n. -11 P-11 MP-11 TF-11 MTF-112. n. -12 P-12 MP-12 TF-12 MTF-12


Wit Micro ot (T rea e )

• No balance coil• 50 kHz–500 kHz,

200 kHz center frequency

• Stainless steel shaft• Black plastic handle

Wit Fisc er ® Triax (Quic isconnect)

• With balance coil• 50 kHz–500 kHz,

200 kHz center frequency• Stainless steel shaft• Black plastic handle

ext Page

With Microdot (Threaded)

• No balance coil• 0 z–50 z• Stainless steel shaft• Black plastic handle

Wit Fisc er Triax (Quic isconnect)

• With balance coil• 50 kHz–500 kHz• Stainless steel shaft• ac p ast c an e

Straight - Microdot Straight - Fischer® Triax


FX: exible copper shaft

/200K-1M, /1-3M: frequency (MP)

/200K-1M, /1-6M: frequency (MTF)



Length

1/8 in. tapered plastic tip


ro e engtStraight – Microtip Straight – Plastic Tip

cro ot sc er r ax cro ot sc er r ax

. n. - -1 -- -1 --

. n. - -2 -2 -2 -2

. n. - -3 -3 -3 -3

. n. - -4 -4 -4 -4

. n. -5 -5 -5 -5 -5

. n. - -6 -6 -6 -6

. n. -7 -7 -7 -7 -7

. n. - -8 -8 -8 -8

. n. - -9 -9 -9 -9

. n. - -10 -10 -10 -10

. n. - -11 -11 -11 -11

. n. - -12 -12 -12 -12

Straight - Microtip Straight - Plastic Tip




O ptions Add to end of partnumber if other thanstandard

/200K-1M, /1-3M: frequency (UP)

/200K-1M, /1-6M: frequency (UTF)




ro e engt

Right Angle Tip 0.5 in. Drop

with Microdot


with Fischer Triax

1 in. hielde 0.072 in. hielde 1 in. hielde 0.072 in. hielde

. n. - 905-3 905-3 905-3 905-3

. n. - 905-4 905-4 905-4 905-4

.5 n. - 5 905-4 905-4 905-4 905-4

. n. -5 905-5 905-5 905-5 905-5

. n. - 905-6 905-6 905-6 905-6

.5 n. - 5 905-6 905-6 905-6 905-6

. n. -7 905-7 905-7 905-7 905-7

. n. - 905-8 905-8 905-8 905-8

. n. - 905-9 905-9 905-9 905-9

. n. - 905-10 905-10 905-10 905-10

. n. - 905-11 905-11 905-11 905-11

. n. - 905-12 905-12 905-12 905-12



• No balance coil• 50 kHz–500 kHz

200 kHz center frequency

• Stainless steel shaft• Black plastic handle

Wit Fisc er ® Triaxuic isconnect

• With balance coil• 50 kHz–500 kHz• Stainless steel shaft• ac p ast c an e

Unshielded surface probes are configured by

adding a U to the front of most surface probe

part num er.

Example: UMP905-30


B: bent handle

C: curved angle drop (0.3 in. or greater)







Length

Drop length


ro e engt


wi h Micro o


wi h Fischer Triax

g t Ange Tp 0.03 n. Drop

cro o

⁄ 1 in. Shielded

sc er Tr ax

⁄ 1 in. Shielded 1

in. hielde

16

n. hielde

1

in. hielde

16

n. hielde. n. - P 2- MP 2- TF 2- MTF 2- P - TF -

. n. -4 P 2-4 MP 2-4 TF 2-4 MTF 2-4 P -4 TF -4

. n. -4 P 2-4 MP 2-4 TF 2-4 MTF 2-4 P -4 TF -4

. n. - P 2- MP 2- TF 2- MTF 2- P - TF -

. n. - P 2- MP 2- TF 2- MTF 2- P - TF -

. n. - P 2- MP 2- TF 2- MTF 2- P - TF -

. n. -7 P 2-7 MP 2-7 TF 2-7 MTF 2-7 P -7 TF -7

. n. - P 2- MP 2- TF 2- MTF 2- P - TF -

. n. - P 2- MP 2- TF 2- MTF 2- P - TF -

. n. -1 P 2-1 MP 2-1 TF 2-1 MTF 2-1 P -1 TF -1

1. n. -11 P 2-11 MP 2-11 TF 2-11 MTF 2-11 P -11 TF -112. n. -12 P 2-12 MP 2-12 TF 2-12 MTF 2-12 P -12 TF -12

Right Angle Tip 0.2 in. Drop Right Angle Tip 0.03 in. Drop

Add to end of partnumber if other thanstandard

B: bent handle








Note: probes pictured on this page have the curved option

robe Lengt

45º Tp 0. n. Drop 45º Tp 0. n. Drop

Micro o Fischer Triax Micro o Fischer Triax1

in. hielde

1

in. hielde

1

in. hielde

1

in. hielde. n. - P4 - TF4 - P4 - TF4 -

. n. -4 P4 -4 TF4 -4 P4 -4 TF4 -4

. n. -4 P4 -4 TF4 -4 P4 -4 TF4 -4

. n. - P4 - TF4 - P4 - TF4 -

. n. - P4 - TF4 - P4 - TF4 -

. n. - P4 - TF4 - P4 - TF4 -

. n. -7 P4 -7 TF4 -7 P4 -7 TF4 -7

. n. - P4 - TF4 - P4 - TF4 -

. n. - P4 - TF4 - P4 - TF4 -

. n. -1 P4 -1 TF4 -1 P4 -1 TF4 -1

1. n. -11 P4 -11 TF4 -11 P4 -11 TF4 -112. n. -12 P4 -12 TF4 -12 P4 -12 TF4 -12



• No balance coil• 50 kHz–500 kHz• Stainless steel shaft

• Black plastic handle

With Fischer ® Triax(Quick disconnect)

• With balance coil• 50 kHz–500 kHz• Stainless steel shaft• Black plastic handle

ext Page


• No balance coil

• 50 kHz–500 kHz• Stainless steel shaft• ac p ast c an e

With Fischer Triax(Quick disconnect)

• With balance coi• 50 kHz–500 kHz• Stainless steel shaft• Black plastic handle

Unshielded surface probes are configured by

adding a U to the front of any surface probe

part number.

xample: UMP905-30

45º Tip (0.5 in. Drop) 45º Tip (0.3 in. Drop)

Add to end of partnumber if other thantandard

B: bent handle







Length

Drop length

1/8 in. or 0.072 in. tip diameter

30º

Fischer triax connector

Note: probes pictured on this page have the curved option

robe Lengt

0º Tp 0. n. Drop

Microdot onnector Fischer Triax onnector Micro o Fischer Triax1

in. hielde

16

n. hielde

1

in. hielde

16

n. hielde

1

in. nshielde

1

in. nshielde. n. - P - MP - TF - MTF - MP305-3 MTF305-3

. n. -4 P -4 MP -4 TF -4 MTF -4 MP305-4 MTF305-4

. n. -4 P -4 MP -4 TF -4 MTF -4 MP305-4 MTF305-4

. n. - P - MP - TF - MTF - MP305-5 MTF305-5

. n. - P - MP - TF - MTF - MP305-6 MTF305-6

. n. - P - MP - TF - MTF - MP305-6 MTF305-6

. n. -7 P -7 MP -7 TF -7 MTF -7 MP305-7 MTF305-7

. n. - P - MP - TF - MTF - MP305-8 MTF305-8

. n. - P - MP - TF - MTF - MP305-9 MTF305-9

. n. -1 P -1 MP -1 TF -1 MTF -1 MP305-10 MTF305-10

1. n. -11 P -11 MP -11 TF -11 MTF -11 MP305-11 MTF305-112. n. -12 P -12 MP -12 TF -12 MTF -12 MP305-12 MTF305-12

30º Tip (0.5 in. Drop)


B: bent handle







ractiona etric

Hole Probes

Nonferrous Nonferrous errous

nshielde hielde nshielde

.12 n. 1 ⁄ n. .1 mm DN- D N- DF-

.1 n. ⁄ 2 n. . DN-1 D N-1 DF-1

mm DN-4. D N-4.0 DF-4.

.1 n. ⁄ 6 n. .7 - D N-1 -

mm DN- . D N-5.0 DF- .

DN- . D N-6.0 DF- .

.2 n. 1 n. . DN-1 D N-1 DF-1

DN-7. D N-7.0 DF-7.. 1 n. ⁄ 6 n. . DN-2 D N-2 DF-2

DN- . D N-9.0 DF- .

. 7 n. ⁄ n. . - D N-2 -

DN-11. D N-11.0 DF-11.

.4 n. ⁄ 6 n. 1. DN-2 D N-2 DF-2

. n. 1 ⁄ n. 2. mm DN- D N-3 DF-

DN-1 . D N-13.0 DF-1 .

. n. ⁄ 6 n. 4.2 mm DN- D N-3 DF-

DN-1 . D N-15.0 DF-1 .

. 2 n. ⁄ n. . mm DN-4 D N-4 DF-4

. n. 11

⁄ 6

n. . - D N-4 -.7 n. n. . DN-4 D N-4 DF-4


• 2 in. working length• 4 in. overall length• ac p ast c an e

Next Page

Microdot connector • Black plastic tip• Brass shaft• ac p ast c an e

Hole Probes



Defectometer Probes



Length

5/32 in. phenolic tipLEMO connector

ro e engt

Surface Probes

onferrous Unshielde onferrous hielde Ferrous Unshielde

traight 90º 0. n. rop traight 90º 0. n. rop traight 90º 0. n. rop

. n. - -2 -- N-2 -- -2 --

. n. - -3 905-3 N-3 N905-3 -3 902-3

. n. - -4 905-4 N-4 N905-4 -4 902-4

. n. -5 -5 905-5 N-5 N905-5 -5 902-5

. n. - -6 905-6 N-6 N905-6 -6 902-6

.5 n. - 5 -6 905-6 N-6 N905-6 -6 902-6

. n. -7 -7 905-7 N-7 N905-7 -7 902-7

. n. - -8 905-8 N-8 N905-8 -8 902-8

. n. - -9 905-9 N-9 N905-9 -9 902-9

. n. - -10 905-10 N-10 N905-10 -10 902-10

. n. - -11 905-11 N-11 N905-11 -11 902-11

. n. - -12 905-12 N-12 N905-12 -12 902-12

Surface Probes

Options Add to end of part

number if other thantandard

/LOO: LEMO connector



Low-Frequency Probes

Spot BridgeStandard Configuration

• 2-pin Microdot• ac case• Polished steel

ext Page

• -p n cro ot• Black case• Polished steel



/4F: Four pin Fischer connector

/4L: Four pin LEMO connector

requency

ange

Spot Bridge

ase art num er

–5 z . 7 n. . 5 n. 013-

–5 z . n. .57 n. 015-

–5 z . 5 n. . n. 018-

–5 z . 5 n. . n. 019-

–5 z . n. . n. 0110-

–5 z . 5 n. . n. 0112-

z– z . 7 n. . n. 023-

z– z . 7 n. .7 n. 026-

z– z . n. . n. 0210-

z– z . 5 n. . n. 042-

z– z . n. . 7 n. 053-

z– z . 7 n. .55 n. 055-

z– z . n. . 7 n. 056-

z– z . n. . 5 n. 102-

z– z . n. . 7 n. 104-

z– z .5 n. .5 n. 105-

z– z . 7 n. . 7 n. 203-

z– z . n. . n. 204-

z– z .5 n. .57 n. 205-

z–2 z . 7 n. . n. 503-

z–2 z . n. . n. 504-

z–2 z .5 n. .57 n. 508-

z–3 z . n. . 5 n. 1002-

z–3 z . n. .5 n. 1005-

z–3 z . n. . n. 1008-

z–5 z . n. . 5 n. 2003-

z–5 z . n. .55 n. 2005-

z–5 z .5 n. .5 n. 1504-


27/60



requency

ange

pot Re ection

ase art num er

z– z . 1 n. . 7 n. 013-

z– z . n. . 7 n. 016-

z– z .7 n. .7 n. 017-

z– z . n. . n. 018-

z– z . 2 n. . n. 019-z– z . n. . n. 0110-

z– z . n. .12 n. 0110-

z– z .7 n. . n. 0118-

z– z .44 n. . 2 n. 023-

z– z . n. . n. 028-

z– z . n. .7 n. 036-

z–1 z . 1 n. . n. 053-

z–1 z . 1 n. . 7 n. 053-

z–1 z . n. .4 n. 054-

z–1 z . n. . 7 n. 055-

z–1 z . 1 n. .7 n. 057-z–1 z . 1 n. . 7 n. 203-

z–1 z .42 n. .4 n. 204-

z–1 z .4 n. . n. 204-

z–1 z . n. . n. 205-

Hz–2 z . n. . n. 093-

Hz–2 z . n. .42 n. 093-

Hz– z . 2 n. .42 n. 503-

Hz– z .4 n. . 2 n. 504-

Hz– z . n. . n. 508-

Hz– z . 2 n. .42 n. 803-

Hz–1 z . 7 n. . n. 1005-Hz–1 z . n. .1 n. 1010-

Spot ReflectionStandard Configuration

• 2-pin Microdot• ac case• Polished steel

ext Page

• -p n cro ot• Black case• Polished steel







IDOD

2-pin Microdot

requency Ring Reflection

art num er

z– z . n. . n. 018-

z– z .5 n. . n. 0110-

z– z . n. . n. 0112-

z– z .7 n. . n. 0113-

z– z . n. . n. 0114-

z– z . n. .5 n. 0115-

z– z . n. . n. 0116-

z– z . 5 n. .75 n. 017-

z– z .5 n. . n. 019-

z– z . n. . n. 0110-

z– z . n. .5 n. 0115-

z– z . n. . 5 n. 0115-

z– z . n. .7 n. 0119-

z– z . n. . 7 n. 0120-

z– z . 5 n. . n. 026-

z– z . n. .7 n. 028-

z– z . n. .75 n. 027-

z– z .5 n. . 5 n. 0210-

z– z .5 n. . n. 0211-

z–1 z . n. . n. 056-

z–1 z . n. . n. 058-

z–1 z . n. .75 n. 057-

z–2 z . 5 n. . 5 n. 206-

z–2 z . 5 n. .7 n. 207-

z–2 z . n. . n. 207-

z–8 z . n. . n. 1006-

z–8 z . 5 n. . n. 1009-

z–10 z . n. .55 n. 2007-

Ring Reflection

ptions Add to end of partnumber if other thanstandard






Miscellaneous Probes

A

B

ype A

B C

A

Type B

Sliding ProbesStandard Configuration

Type A

• 2-pin Microdot• ac p eno c case• Tridirectional scan

• 1 in. diameter

Type

• 2 ea. 1-pin Microdot• Black Delrin case• Single-direction scan• Acrylic spacer

ype art um er requency

Sliding Probes

mens onsonnector

405- z– z . n. . n. -p n cro ot

1007- – z . n. . n. -p n cro ot

1004- – z . n. . n. -p n cro ot

1004- – z . n. . n. -p n cro ot

0419- z– z . n. . n. .7 n. 2 1-pin Microdot

201 z–1 z . n. .7 n. . n. 2 1-pin Microdot

0423- z–1 z . n. .7 n. . n. 2 1-pin Microdot

5010- – z . n. . n. . n. 2 1-pin Microdot

0210- – z . n. . n. . n. 2 1-pin Microdot

0210- –5 z . n. . n. . n. 2 1-pin Microdot

102 – z . n. .5 n. .7 n. 2 1-pin Microdot






NDT Engineering Corp. can supply wheel probes and re erence standards or the most popular aircra t in service. Please have aircra tmake, model, and wheel manufacture when you talk to our sales staff for availability. If we do not carry what you are looking for, allwe need is a sample of the wheel in question; either a section cut from the wheel or a full wheel. Customer is responsible for returnshipping costs i they want the wheel returned in same condition as receive

Wheel Probes Wheel Standards

ircrafWheel Probes Wheel Standards

ain Nose Tail ain Nose Tail

- - -717 -717

- - -727 -727

37 100-20 P-737M 100-20 P-737N 100-20 -737M 100-20 -737N 100-20

- - -747 -747

7 P-7 7 P-7 7 -757 -757

7 P-7 7 P-7 7 -767 -767

2 P-A 2 P-A 2 -A320 -A320-9 3 P-D 9M 3 P-D 9N 3 -D 9M 3 -D 9

-1 P-D 10 P-D 10 -D 10 -D 10

D-80 eries P-MD P-MD -MD80 -MD80

ash P-DH M- 2 P-DH -DH8M-32 -DH8

-13 P-K 135 P-K 135 -K 135 -K 135

-13 P- 130 P- 130 - 130 - 130

- P-B 2 P-B 2 -B52 -B52

-15C Eagle, F-15D Eagle P-F15 D P-F15 D -F15 D -F15 D

-15E Strike Eagle P-F1 E P-F1 E -F15E -F15W

-1 P-F1 P-F1 -F16 -F16

-1 P-A1 P-A1 -A10 -A10H-6 P- H60 P- H60 - H60 - H60



traight type - Top view

Angle type - Side view

traight finger probe

1.0 in.

ngth

Drop

Ø

1.0 in.

Angle finger probe

Finger

Part Num er ngle Drop Tip LengtTPF- . n.

TPF- . n. --

TPF- . n.

TPF- . n. --

TPF- . n.

TPF-4 4 . n. --

TPF-4 4 . n.

TPF- Straight . n.

TPF- Straight . n.

TPF- Straight . n.

TPF- Straight . n.TPF-1 Straight 1. n.

Blade Finger

Blade

art num er Angle c ness

.045-60 traight . 5 n.

.060-60 traight . n.

.090-60 traight . n.

90.045-60 . 5 n.

90.060-60 . n.

90.090-60 . n.

45.045-60 5 . 5 n.

45.060-60 5 . n.

45.090-60 5 . n.

30.045-60 . 5 n.

30.060-60 . n.

30.090-60 . n.



The part numbers listed below are configured with 2-pin Microdot

connectors. To configure for Fischer® triax connector, refer to the

c art e ow.

Part numbers listed have a length of 6 in. Other lengths are configured by

adding the desired length, in inches or millimeters, to the end of the part

num er.

Example: BPU-16/FX8

• 1 ⁄ 1 in. diameter

n. wor ng engt

Spring Loaded

art Num er ange

N 375-2.5L 500 kHz– z

N 375-2.5L 200 – z

N 375-2.5L 50 –1 z

N 375-2.5L 20 – z

N 375-2.5L 10 – z

N 375-2.5L 5 –1 z

N 375-2.5L 2 –1 z

N 375-2.5L 1 – zN 375-2.5L 50 z z– z

Spring Loaded Flexshaft

Flexshaft

nstrument r ver art um er

n versa otor BPU-10 FX1

oerster otor BDP-10 FX

Elotest tandard Rotor BPE-10 FX

otest n otor BPEM-10 FX

ec otor BPRA-10 FX

P 5 Rotor P 5-10 FX

etec otor BPZ-10 FX

izes listed are based on standard measurement of 1 ⁄ 4 in. increments.

or examp e: -10=1 ⁄ 4 , ⁄ 2. or m meters, su st tute w t metr c s zes.Example: BPRA-11M/FX203M





Cables and Adapters

Rotary AdaptorsReference Coil Adapters and Cables

InstrumentProbe Connector

Reference Coil Adaptors (BNC) icro o ischer oax

Zetec MIZ-10, MIZ-20, MIZ-2 Z-M-6 50-500 Z- F-6 - AZ-BN -

Zetec MIZ-2 Z21-M-6 - Z21- F-6 - AZ21-BN -

Nortec NDT-18, NDT-19, NDT-23, NDT-2 BR-M-6 - BR- F-6 - ABR-BN -

Nortec 1000, 200 N16-M-6 - N16- F-6 - AN16-BN -

Hocking Phasec 1.1, AV-10, AV10 H-M-6 - H- F-6 - AH-BN -

Hocking Phasec 2, 220 H22-M-6 - H22- F-6 - AH22-BN -

Foerster Defectoscope SD 2.832, AF 2.83 D-M-6 - D- F-6 - AD-BN -

Elotest B1, B A B1-M-6 - A B1- F-6 - AB1-BN -* ther lengths are available.

Reference coil adapters are used with manuallyoperated, single-coil probes such as the MP-

type surface probes or the BPM-type manual

bolt hole probes and must be used with a

BM-type cable.

Ask for cable CBM-6 when placing an order.

Probe Connection

niversa oerster echi PElotes

tandar

Elotest Min Zetec

niversal Rotor -- RA - RA -R RA -P RA - RA -E R -

Foerster Rotor RAD- - RAD-P - - -

Rechii Rotor RARA- - -- RARA-P - - -

P 5 Rotor RAP5- RAP - RAP -R RAP - RAP -E RP -

Elotest tandard Rotor RAE- - - RAE-P -- - -

Elotest Mini Rotor RAEM- - - RAEM-P - -

Zetec Rotor RAZ- - - RAZ-P - - --

Physical Acoustics Rotor RAA- - RAA-P - - -

* For Hocking Phasec 1.1 Rotor and Elotest Mini-Rotor



Bridge Cables and Adapters

nstrumenProbe connector

-Pin Micro ot Fischer Triax 4-pin Fischer Dual Micro ot

etec MIZ-10, MIZ-20, and MIZ-2 Z-2M- Z-TF- Z-4F- Z-M E-etec MIZ-2 Z21-2M- Z21-TF- Z21-4F- Z21-M E-

ortec NDT-18, NDT-19, NDT-23, and NDT-24 BR-2M- BR-TF- BR-4F- BR-M E-

ortec 1 an 2 N16-2M- N16-TF- N16-4F- N16-M E-

ocking Phasec 1.1, AV-10, and AV10 H-2M- H-TF- H-4F- H-M E-

ocking Phasec 2, 220 H22-2M- H22-TF- H22-4F- H22-M E-

oerster Defectoscope SD 2.832, AF 2.83 F D-2M- F D-TF- F D-4F- F D-M E-

lotest B1 an B B1-2M- B1-TF- B1-4F- B1-M E-

D Tech mni can MX E -2M- -TF- -4F- -MFE-

* Can be used on Nortec 1000 and 2000 with 8-pin adaptor.

nstrument Cable Connector IZ-1 - DT-1 DT-1 hasec 1.1 hasec 22

etec MIZ-10, MIZ-20, and MIZ-2 -- - - Z-N1 - -

etec MIZ-2 - - Z21-N1 - -

ortec NDT-18, 19, 23, and 2 - - -- BR-N1 - -

ortec NDT-1000, 200 N1 - N1 -Z2 N1 -B N1 - N1 -H2

ocking Phasec 1.1, AV-10, and AV-10 - - - H-N1 -- -

ocking Phasec 2, 220 - - H22-N1 -

oerster Defectoscope SD 2.832, AF.

F D- F D-Z2 F D-B F D-N1 F D- F D-H2

lotest B1 an B - - - B1-N1 - -

D Tech mni can MX E - -Z2 -B -N1 - -H2* Includes probe connections for those under instrument list.

-



Reflection Cables and Adapters

-

nstrumentProbe Connector

- n cro ot sc er r ax 4- n sc er ua cro ot

etec -10, -20, an -2 Z-2M- Z-TF- Z-4F- Z-M E-

etec -2 Z21-2M- Z21-TF- Z21-4F- Z21-M E-

ortec -18, 19, 23, an 24 RBR-2M- RBR-TF- RBR-4F- RBR-M E-

ortec 1000 an 200 RN16-2M- RN16-TF- RN16-4F- RN16-M E-

oc ng asec 1.1, -10, 10 RH-2M- RH-TF- RH-4F- RH-M E-

oc ng asec 2, 220 RH22-2M- RH22-TF- RH22-4F- RH22-M E-

oerster De ectoscope RF D-2M- RF D-TF- RF D-4F- RF D-M E-

otest 1 an B1-2M- B1-TF- B1-4F- B1-M E-

D Tech mni can MX E R -2M- R -TF- R -4F- R -M E-

* Can be used on Nortec 1000 and 2000 with 8-pin adaptor.

nstrumentCable Connector

IZ-1 - DT-1 DT-1 hasec 1.1 hasec 22

etec MIZ-10, MIZ-20, and MIZ-2 - - RZ-N1 - -

etec MIZ-2 - -- - RZ21-N1 - -

ortec NDT-18, 19, 23, and 2 - - RBR-N1 - -

ortec NDT-1000, 200 RN1 - RN1 -Z2 RN1 -B -- RN1 - RN1 -H2

ocking Phasec 1.1, AV-10, and AV-10 - - - RH-N1 -

ocking Phasec 2, 220 - - RH22-N1 - --

oerster Defectoscope RF D- RF D-Z2 RF D-B RF D-N1 RF D- RF D-H2

lotest B1 an B - - - RB1-N1 - -

D Tech mni can MX E R - R -Z2 R -B R -N1 R - R -H2* ncludes probe connections for those under instrument list



Hole Probes Surface Probes Low-frequency Probes

art um er ontents art um er ontents art um er ontents

-1064-38 pro es

⁄ 2 n. t roug 1. n.n 1 ⁄ 2 n. ncrements

--30, 902-40

P905-50B, MP455-50PF-902, BM-

-

803-1, L 203-1,058-1, 019-1,0112-

ables as require

-1064- 8 pro es

⁄32 n. t roug 1. n. n ⁄32 n. ncrements

- -5 p us:

-50, 905-5 -

-7 p us:0419-1, 058-

-1048-30 BPU probes ⁄32 n. through 3⁄ n. n ⁄32 n. increments

-PK-7 plus:

-60 , 9003-50 ,BM-

-1

FK-7 plus:S2003-1, LR0115-TW1004-1, LTW1007-ables as require

-1040 pro es cover ngole sizes from 5⁄3 n. to ⁄4 n.

-1

-9 p us:PF-30, MP902-50 ,P305-50

902-60 , 9003-0, BM-

Probe KitsHole Probes

Surface Probes

Low-Frequency Probes



Ultrasound Products

Ordering InformationQuality of workmanship takes priority at NDT Engineering Corporation. Components and materials used in the manufacture of ourtransducers are checked to ensure that they comply with NDT Engineering Corporation specifications. Attention is paid to every aspectof design, production, and assembly of all NDT Engineering Corporation transducers.

The transducer is one of the most critical components of any ultrasonic system. A great deal of attention should be paid to selecting theproper transducer for the application. Consideration should be given to the use of focused transducers, transducers with wear surfacesthat are appropriate for the test material, and the choice of the appropriate frequency and element diameter.

While these guidelines are quite useful, each application is unique and performance will be dependent on transducer configuration,frequency, and element diameter. The summaries below provide a general impression of the characteristics of each transducer seriesfound in this section of the catalog.

Transducer Series DescriptionSUC Contact transducers

SCD and SCDR Delay line transducers

SUD and SUDR Dual element transducersSX 0.187 in. element shear wave transducers

SUSM 0.187 in. element shear wave transducers

SUM 0.250 in. element shear wave transducers

SU and S 0.375 in. and 0.500 in. element shear wave transducers

SCT and SCW Quickfit™ shear wave transducers and wedges

SUI and SUSI Immersion transducers

Except for our line of standard contact transducers (SUC) found on page 37, all transducers follow a specific numbering format that iseasy to use in selecting both the proper transducer from this catalog and the design of special requirement transducers.

SUI 10 37

Frequency

Element size

SX 5 45 A S

Transducerseries

Frequency Angle Materialprojected

Connectorposition

Transducerseries

Part Number SX 545AS (page 40)0.187 in. shear wave transducer5 MHz frequency45º in aluminumSide-mounted Microdot

Part Number SUI 1037 (page 45)Standard immersion transducer10 MHz frequency0.375 in. element



Contact TransducersStandard

Element imensionsart Num er

requency iameter

. z . 7 n. . 2 n. . n. 157-

. z . n. . n. . 2 n. 17

. z .7 n. . n. . n. 15

. z . n. .1 n. .2 n. 15

.2 z .2 n. .4 n. . n. 16

.2 z . 1 n. .4 n. . n. 161-

.2 z . 7 n. . 2 n. . n. 16

.2 z . n. . n. . 2 n. 16

.2 z .7 n. . n. . n. 15

.2 z . n. .12 n. .2 n. 15

.2 z .12 n. .27 n. .2 n. 23

. z .1 n. .2 n. . n. 166-1

. z .1 n. .2 n. . n. 166-1A

. z .1 n. . 1 n. . n. 166-1

. z .2 n. . 7 n. .4 n. 169

. z .2 n. . 7 n. . n. 166

. z .2 n. . 7 n. .7 n. 706

. z .2 n. . 7 n. .2 n. 166-3

. z . 1 n. .4 n. . n. 166-

. z . 1 n. . 2 n. . n. 16

. z . 7 n. . 2 n. . 2 n. 16

. z . n. . 2 n. . 2 n. 47

. z .7 n. . n. . n. 16

. z .1 n. .2 n. .4 n. 168-1A

. z .1 n. . 1 n. . n. 168-1

. z .2 n. . 1 n. .4 n. 168B

. z .2 n. . n. .4 n. 168A

. z .2 n. . 7 n. . n. 168

. z .2 n. . 7 n. .7 n. 726

. z . 1 n. .4 n. . n. 168-

. z . 7 n. . 2 n. . n. 16

. z . n. . n. . n. 167-

. z . n. . n. . 2 n. 167-

. z .12 n. .1 n. . n. 185

. z .12 n. .2 n. .4 n. 180*

* mooth no-knurle grip.

** This transducer also has a 6-ft BNC cable attached.



Delay Line

requency Element izeermanent De ay L ne ep acea e De ay L ne

art um er ameter e g art um er ameter e g

. z .5 n. D 15 . n. . 5 n. DR 15 . n. . n.

. z . 5 n. D 22 . 7 n. . n. DR 22 .57 n. .5 n.

. z . 7 n. D 23 .5 n. . n. DR 23 .75 n. .75 n.

. z .5 n. D 25 . n. . 5 n. DR 25 . n. . n.

. z . 5 n. D 52 . 7 n. . n. DR 52 .57 n. .5 n.

. z . 7 n. D 53 .5 n. . n. DR 53 .75 n. .75 n.

. z .5 n. D 55 . n. . 5 n. DR 55 . n. . n.

. z .75 n. D 57 . n. .7 n. DR 57 . 5 n. . 5 n.

. z . n. D 510 . 5 n. . n. DR 510 .5 n. . n.

. z . n. D 101 . n. . n. DR 101 . n. . n.

. z . 5 n. D 102 . 7 n. . n. DR 102 .57 n. .5 n.

. z . 7 n. D 103 .5 n. . n. DR 103 .75 n. .75 n.

. z .5 n. D 105 . n. . 5 n. DR 105 . n. . n.

5. z . n. D 151 . n. . n. DR 151 . n. . n.

5. z . 5 n. D 152 . 7 n. . n. DR 152 .57 n. .5 n.

5. z . 7 n. D 153 .5 n. . n. DR 153 .75 n. .75 n.

5. z .5 n. D 155 . n. . 5 n. DR 155 . n. . n.

– z . n. D 201 . n. . n. DR 201 . n. . n.

– z . 5 n. D 202 . 7 n. . n. DR 202 .57 n. .5 n.

– z . 7 n. D 203 .5 n. . n. DR 203 .75 n. .75 n.



Dual Element - Cylindrical

Dual Element Cylindrical Contact Transducers

Element imensionsart Num er

requency iameter

. z .2 n. . 7 n. . n. D 12

. z . 1 n. .4 n. . 7 n. D 13

. z . 7 n. . n. . 2 n. D 13

. z . n. . 2 n. .7 n. D 15

.2 z .2 n. . 7 n. . n. D 22

.2 z . 1 n. .4 n. . 7 n. D 23

.2 z . 7 n. . n. . 2 n. D 23

.2 z . n. . 2 n. .7 n. D 25

. z .2 n. . 7 n. . n. D 52

. z . 1 n. .4 n. . 7 n. D 53

. z . 7 n. . n. . 2 n. D 53

. z . n. . 2 n. .7 n. D 55

. z .2 n. . 7 n. . n. D 102

. z . 1 n. .4 n. . 7 n. D 103

. z . 7 n. . n. . 2 n. D 103

. z . n. . 2 n. .7 n. D 105

. z .2 n. . 7 n. . n. D 152

. z . 1 n. .42 n. . 7 n. D 153

. z . 7 n. . n. . 2 n. D 153

. z . n. . 2 n. .7 n. D 155



Shear Wave TransducersMicro Miniature

op mount connectoride mount connector

emenMicro Miniature with Side Mount Connector Micro Miniature with Top Mount Connector

art um er art um er

requency ng e um num tee um num tee

. z 5 X 235A X 235 X 235A X 235

. z 5 X 245A X 245 X 245A X 245

. z 60 X 260A X 260 X 260A X 260

. z 70 X 270A X 270 X 270A X 270

. z 5 X 535A X 535 X 535A X 535

. z 5 X 545A X 545 X 545A X 545

. z 0 X 560A X 560 X 560A X 560

. z 70 X 570A X 570 X 570A X 570

. z 5 X 1035A X 1035 X 1035A X 1035

. z 5 X 1045A X 1045 X 1045A X 1045

. z 0 X 1060A X 1060 X 1060A X 1060

. z 70 X 1070A X 1070 X 1070A X 1070



ElementSubminiature with Side Mount Connector Subminiature with Top Mount Connector

art Num er art Num er

requency Angle luminum tee luminum tee

.2 z 5˚ M 235A M 235 M 235A M 235

.2 z ˚ M 245A M 245 M 245A M 245

.2 z 60˚ M 260A M 260 M 260A M 260

.2 z ˚ M 270A M 270 M 270A M 270

.2 z 0˚ M 290A M 290 M 290A M 290

. z ˚ M 535A M 535 M 535A M 535

. z 5˚ M 545A M 545 M 545A M 545

. z ˚ M 560A M 560 M 560A M 560

. z 70˚ M 570A M 570 M 570A M 570

. z ˚ M 590A M 590 M 590A M 590

. z 5˚ M 1035A M 1035 M 1035A M 1035

. z ˚ M 1045A M 1045 M 1045A M 1045

. z 60˚ M 1060A M 1060 M 1060A M 1060

. z 70˚ M 1070A M 1070 M 1070A M 1070

. z ˚ M 1090A M 1090 M 1090A M 1090

Subminiature

Top mount connector ide mount connector



ElementMiniature with Side Mount Connector Miniature with Top Mount Connector

art Num er art Num er


.2 z º M 235A M 235 M 235A M 235

.2 z º M 245A M 245 M 245A M 245

.2 z º M 260A M 260 M 260A M 260

.2 z º M 270A M 270 M 270A M 270

.2 z º M 290A M 290 M 290A M 290

. z º M 535A M 535 M 535A M 535

. z º M 545A M 545 M 545A M 545

. z º M 560A M 560 M 560A M 560

. z º M 570A M 570 M 570A M 570

. z º M 590A M 590 M 590A M 590

. z º M 1035A M 1035 M 1035A M 1035

. z º M 1045A M 1045 M 1045A M 1045

. z º M 1060A M 1060 M 1060A M 1060

. z º M 1070A M 1070 M 1070A M 1070

. z º M 1090A M 1090 M 1090A M 1090

Miniature

ide mount connector Top mount connector



1.25 in. 0.625 in.

0.750 in.

1.000 in. 0.500 in.

0.625 in.

To configure with top mount connector, replace “S” at the end of part number with a “T”.

Element

Shear Wave Transducers

. 7 in. Element . in. Element

art num er art num er


.2 z 5˚ 235A 235 235A 235

.2 z ˚ 245A 245 245A 245

.2 z 60˚ 260A 260 260A 260

.2 z ˚ 270A 270 270A 270

.2 z 0˚ 290A 290 290A 290

. z ˚ 535A 535 535A 535

. z 5˚ 545A 545 545A 545

. z ˚ 560A 560 560A 560

. z 70˚ 570A 570 570A 570

. z ˚ 590A 590 590A 590

. z 5˚ 1035A 1035 1035A 1035

. z ˚ 1045A 1045 1045A 1045

. z 60˚ 1060A 1060 1060A 1060

. z 70˚ 1070A 1070 1070A 1070

. z ˚ 1090A 1090 1090A 1090

0.375 in. Element 0.500 in. Element



SwiftChange™ Transducers and Wedges

C

BA

Standard

with top mount connector

Microdot

Frequency lemen

ize

SwiftChange ™

rans ucers

Standard with Top

Mount onnector

Part Num er

1. z .2 n. T 12

1. z . 7 n. T 13

1. z . n. T 15

2.2 z .2 in. T 22

2.2 z . 7 n. T 23

2.2 z . n. T 25

. z .2 n. T 52

. z . 7 n. T 53

. z . n. T 55

1 . z .2 n. T 102

1 . z . 7 n. T 103

1 . z . n. T 105

hear Angle

Wedge for ⁄ 1 in. Elementrans ucer

Wedge for ⁄ in. Elementrans ucer

Wedge for ⁄ 1 in. Elementrans ucer

art Num er art Num er art Num er

luminum tee luminum tee luminum tee

30˚ T-25-30 T-25-30 T-37-30 T-37-30 T-50-30 T-50-30

˚ T-25-35 T-25-35 T-25-35 T-25-35 T-25-35 T-25-35

40˚ T-25-40 T-25-40 T-25-40 T-25-40 T-25-40 T-25-40

˚ T-25-45 T-25-45 T-25-45 T-25-45 T-25-45 T-25-45

50˚ T-25-50 T-25-50 T-25-50 T-25-50 T-25-50 T-25-50

˚ T-25-60 T-25-60 T-25-60 T-25-60 T-25-60 T-25-60

70˚ T-25-70 T-25-70 T-25-70 T-25-70 T-25-70 T-25-70

80˚ T-25-80 T-25-80 T-25-80 T-25-80 T-25-80 T-25-80 ˚ T-25-90 T-25-90 T-25-90 T-25-90 T-25-90 T-25-90

edge Dimensions (in in.

lement

size

efracte

angle

.250 n. 5 . .5

. .

7 . 7 .5

. .. 7 in. 4 . 1 .

. .

7 .2 .

. .7

.500 n. 5 . .

. .7

7 . .

. .7



Immersion Transducers

Standard and Slim-Line

requency tandard Immersion Transducers

.1 n. Element .2 n. Element . 7 n. Element . n. Element

. z I 11 I 12 I 13 I 15

.2 z I 21 I 22 I 23 I 25

. z I 51 I 52 I 53 I 55

. z I 101 I 102 I 103 I 105

. z I 151 I 152 I 153 I 155

–2 z I 201 I 202 I 203 I 205

Slim-line Immersion Transducers

.1 n. ement . 5 n. ement

. z U I 11 U I 12

. z U I 21 U I 22

. z U I 51 U I 52

. z U I 101 U I 102

5. z U I 151 U I 152

– z U I 201 U I 202



Cables, Kits, and Miscellaneous UT Accessories

DT Engineering Corporation remains highlyedicated to its position as a leading providerf custom made UT kits, which include certified

transducers, reference standards, and guides.his means that we can work with you on any

special pro ect at no additional cost until a wora le solution has een achieve .n addition to providing guides and positionersor all ma or airplane manufacturers, we have

also been responsible for projects on the militaryaircraft listed in the following table:

Cables and Extensions Custom Kits and Guides

Cables and extensions

escr pt on art um er engt

6 ft BN to Microdot BM- f

12 ft BN to Microdot BM-1 t15 ft BN to Microdot BM-1 ft

6 ft BNC to right-angle Microdot BMR- ft

12 ft BN to right-angle Microdot BMR-1 2 t

15 ft BN to right-angle Microdot BMR-1 5 t

6 ft BN to BN BB- t

12 ft BN to BN BB-1 2

6 ft miniature Microdot to BN BMM- ft

6 ft dual BN s to dual Microdots 2BM-M E- ft

6 ft dual BNCs to 2-pin Microdot 2BN-2M- ft

1 in. female Microdot to male right-angle Microdot AMF-MR-1 in.

in. emale Microdot to male Microdot - -1 0 n.



Waveform Analysis Frequency Spectrum Analysis

Beam Profile

Note: Certification is a method to show transducer performance. Please refer to the inspection procedure for the proper instru-ment setup for your inspection.

Approved techniques and instrumentation are used to supply waveform, damping factor, frequency spectrum, and beam profiles. Cus-tomers requiring certification of transducers should specify the type of certification, as described below, when ordering.

Certification Level 1

• Certificate of conformance by letter

Certification Level 2

• Waveform analysis

• Frequency spectrum analysis

Transducer Certification



Roller Probes, Yokes, and Gimbals

Roller probe yokes, though limited in application, o er the considerable advantage o eliminating the inconvenience o water requiredwith jet yokes. The design of the roller probe yokes has been extensively improved to meet US Air Force requirements. The current de-sign is unique in that it provides constant roller probe contact pressure and alignment throughout inspection of widely varying materialthicknesses up to the limits o the yoke opening.

Roller probe yokes are shipped with two cables BNC to right-angle Microdot number CBMR-12 (see page ). Roller probes and gim-bals are separate unless purchased as part o a kit.

ypeRoller Probe Yokes

art um er roat engt roat t

o er pro e yo e on y -242 4 n. 0–20 n.

-322 2 n. 0–20 n.

-362 6 n. 0–20 n.

-402 0 n. 0–30 n.

-482 8 n. 0–30 n.

o er pro e yo e ts -242 4 n. 0–20 n.

-322 2 n. 0–20 n.

-402 0 n. 0–30 n.

art Num er requency Element ize

R-58 . z . 7 n. × . n.

R-58 . z . 7 n. × .7 n.

R-58 .2 z . 7 n. × . n.

R-58 .2 z . 7 n. × .7 n.

R-58 . z . 7 n. × . n.R-58 . z . 7 n. × .7 n.

Part Num er Description

A-58 Fits all DCR roller probes and RPTW roller probe

yokes.



Waterjet Yokes, Nozzles, and Nozzle Transducers

ype

Waterjet Yoke

art um er roat engt hroat apozzle ap

Approximate

Fixed length and widt TW-12 n. in. n.

TW-24 n. in. n.

JTW-30 30 n. 8 n. n.

JTW-36 36 n. 8 n. n.

JTW-42 42 n. 8 n. n.

ar a e engt an w t JTWX-14 1 14 n. usts to 10 n. n.

TWX-30 1 in. Ad usts to 14 in. n.

TWX-40 1 4 in. Ad usts to 17 in. n.

Handheld waterjet yokes, also called wands, provide a simple, cost-e ective means o inspecting composites and bonded structures.Although the most common application is for the inspection of small parts and details not easily or efficiently inspected with the largescanning systems, field inspection of installed structures can be performed as well.

Yokes are supplied with two nozzles (JTN 1.5 × 0.75 —nozzles and two CBMR-12 cables (cables found on page ).

Transducers are designed to fit all nozzles. They are interchangeable, and frequencies ranging from 0.5 MHz to 5.0 MHz are available.The most commonly used requency or TTU applications is 1.0 MHz.

Nozzles

art um ermens ons ep acement p

art um ere g ameter

TN-501 xxx 1. n. . n. I-501 xxx

- . n. . 5 n. -

JTN-70V xxx . n. . n. JI-70V xxx

PTIONS:/xxx is required inside the diameter of nozzle tip in choices of 0.125 in.,.187 in. and 0.250 in.

Nozzle Transducers

art um er requency ement ameter

A4-.5 . . z . in.

A4-1.0 . . z . in.

A4-2.25 . . 5 z .5 n.

A4-5.0 . . z .5 n.



Aircraft StandardsReference Standards

Boeing

rcra t eries Part Numbers

oe ng 70 ee NT

oe ng 72 ee NT

oe ng 73 ee NT

oe ng 74 ee NT

oe ng 75 ee NT

oe ng 76 ee NT

oe ng 77 ee NT

Note: Manufacturers continually add new reference standard numbers. Please

contact our sales department for updated lists.

Other Manufacturers

NDT Engineering Corporation can manufacture reference standards for any aircraft manu-acturer. Due to low demand we don’t carry

ull maintaince manuals on these aircra t.

Drawings may e require to ensure youreceive the most current revision.

Airbus

rcra t eries Part Numbers

r us 30 ee A300 NT

r us 300-60 ee A300-600 NT

r us 31 ee A310 NT

r us 318, 319, 320, 32 ee A318 NTM, A319 NTM, A320 NTM, and A321 NT

r us 32 ee A320 NT

r us 33 ee A330 NT

r us 34 ee A340 NT

* Each series is nonspecific and found in the NDI Manuals for all aircraft listed.

Note: Manufacturers continually add new reference standard numbers.

ease contact our sa es epartment or up ate sts.

essna

Em raer

Fairchil

Falcon

Fokkerulfst

Ndteng Olympus

Documents

Transcript of Ndteng Olympus