Download - Microwave Antennas - moc-ltd.commoc-ltd.com/MOC-Webpage/Products/Antennas & Combiners/Catalogs... · Microwave antennas Page 14. PRO GHz LIGHTWEIGHT-LINK SERIES Series of Parabolic

Microwave Antennas

making the world smaller www.procom.dk

http://www.procom.dk

MICROWAVE ANTENNAS

10 GHzOmnidirectional Antennas

WGSL 10 2

Parabolic Antennas

PRO-10-001/25 3PRO-10-001/50 4

Accessories

PRO-10-... 5

24 GHzParabolic Antennas

PRO-24-001 6

Accessories

PRO-24-... 7


PRO-47-001 8

Accessories

PRO-47-... 9


PRO-76-001 10

Accessories

PRO-76-... 11


PRO-145-001 12

Accessories

PRO-145-... 13

AccessoriesParabolic Antennas

PRO GHz LIGHTWEIGHT-LINK SERIES 14

Professional Link Antennas

PRO GHz LIGHTWEIGHT-LINK SERIES 15

Accessories

5L SMAF LOAD DC-0-25 GHz 16BPF 2.5G/7-... 17BPF 47G/2 18BPF 10G/9 19BPF 24G/7 20

Index

______________________________________________________________________________________________________________________________________________________________________________________________________________________________

Table of Content

Microwave Antennas10 GHz24 GHz47 GHz76 GHz140 GHzAccessories

_______________________________________________________________________________________________________________

Page 1

WGSL 10

ORDERING DESIGNATIONS

TYPE PRODUCT NO.

WGSL 10 150000099

SPECIFICATIONS

ELECTRICAL

MODEL WGSL 10

ANTENNA TYPE Slot 2 x 12 slots

FREQUENCY 10.15 - 10.45 GHz

IMPEDANCE Nom. 50 Ω

RADIATION Omnidirectional

POLARIZATION Horisontal

GAIN > 12 dBi

BANDWIDTH 300 MHz

SWR ≤ 1.6

MAX. POWER 50 W

MECHANICAL

CONNECTOR N-female

WIND SURFACE 0.0136 m²

WIND LOAD 20 N @ 160 km/h

COLOUR Brass

MATERIALS Brass

TOTAL HEIGHT 323 mm

WIDTH TOP END Approx. 48 mm

DIA. IN BOTTOM END Approx. 25.4 mm

WEIGHT Approx. 0.4 kg

MOUNTING 4 x M4 screws

_______________________________________________________________________________________________________________

Typical gain and SWR curves

SWR _ _ _ Gain dBi ____

f[GHz]

_______________________________________________________________________________________________________________

TYPICAL RADIATION PATTERN (E-PLANE) TYPICAL RADIATION PATTERN (H-PLANE)

_______________________________________________________________________________________________________________

Microwave antennas Page 2

PRO-10-001/2525 cm Parabolic Dish Antenna for the 10 GHz band


TYPE PRODUCT NO. MODEL

PRO-10-001/25 150000115 Without radome

PRO-10-001/25/D 150000116 With radome

SPECIFICATIONS

ELECTRICAL

MODEL PRO-10-001/25


GAIN Approx. 25 dBi

POLARIZATION Linear, horizontal or vertical

BEAMWIDTH (-3dB) Horizontal: Approx. 7.8°Vertical: TBD

1st SIDE LOBE LEVEL Approx. -20 dB

F/B RATIO > 30 dB (See curves)

SWR < 1.5

MAX. POWER 100 W

MECHANICAL

WAVEGUIDE WR90

CONNECTION Standard flange UBR100

WIND SURFACE Approx. 0.06m2

WIND LOAD Approx. 80 N @ 160 km/t / 80 N @ 100 mph

MATERIALS Parabolic dish: AluminiumWaveguide and feed horn: Brass

COLOUR White RAL9010

DIMENSIONS ø267 mm / ø10.51 in.,Depth 160 mm / 6.30 in. (incl. feeding)

WEIGHT Without radome: 400 g / 0.88 lb.With radome: 710 g / 1.57 lb.

_______________________________________________________________________________________________________________

Main lobe : Horizontal polarization Total RPE : Horizontal polarization

_______________________________________________________________________________________________________________


PRO-10-001/5050 cm Parabolic Dish Antenna for the 10 GHz band

SPECIFICATIONS

ELECTRICAL

MODEL PRO-10-001/50


GAIN Approx. 31 dBi

POLARIZATION Linear, horizontal or vertical

BEAMWIDTH (-3dB) Horizontal: Approx. 3.9°Vertical: TBD

1st SIDE LOBE LEVEL Approx. -20 dB

F/B RATIO > 40 dB (See curves)

SWR < 1.5 @ 10.0 - 10.5 GHz< 2.0 @ 9.5 - 11.5 GHz

MAX. POWER 100 W

MECHANICAL

WAVEGUIDE WR90

CONNECTION Standard flange UBR100

WIND SURFACE Approx. 0.25m2 / 2.67 ft2

WIND LOAD Approx. 316 N @ 160 km/t / 316 N @ 100 mph

MATERIALS Parabolic dish: AluminiumWaveguide and feed horn: Brass

COLOUR White RAL9010

DIMENSIONS ø480 mm / ø18.90 in.,Depth 225 mm / 8.86 in. (incl. feeding)

WEIGHT Without radome: 950 g / 2.10 lb.With radome: 1600 g / 3.53 lb.

_______________________________________________________________________________________________________________

Main lobe : Horizontal polarization Total RPE : Horizontal polarization

_______________________________________________________________________________________________________________


PRO-10-...


TYPE NO. PRODUCT NO.

PRO-10-002 150000008

PRO-10-004 150000010

PRO-10-006 150000006

PRO-10-007 150000007

PRO-10-008 150000002

PRO-10-002

10 GHZ PARABOLIC DISHDia. = 48 cm, F/D = 0.4.

White coated but without text and without central hole for waveguide feedthrough.

PRO-10-004

PRO-10-006

10 GHZ FLANGE FOR WR 90,made of brass.

PRO-10-007

10 GHZ COAXIAL/WAVEGUIDE TRANSITION(N-female connector).

Made of gilt brass.

SWR at f o : < 1.3.

PRO-10-008_______________________________________________________________________________________________________________


10 GHZ WAVEGUIDE SECTION WR 90,made of brass. L = 227 mm

(length suiting parabolic dish antenna).

Frequency range: 8.2 - 12.6 GHz

10 GHZ COAXIAL/WAVEGUIDE TRANSITION(SMA-female connector).

Made of gilt brass.

SWR at f o : < 1.5.

PRO-24-00124 GHz Parabolic Antenna


TYPE PRODUCT NO.

PRO-24-001 150000070

PRO-24-001

36 dBd, Dia. = 48 cm, F/D = 0.4.

Completely assembled parabolic dish antenna, white coated, with band

designation, waveguide, flange and feed horn.

SWR at f o : < 1.25. Opening angle: 1.9°.

_______________________________________________________________________________________________________________


PRO-24-...

Ordering designations


PRO-24-002 150000020

PRO-24-004 150000022

PRO-24-006 150000023

PRO-24-007 150000019

PRO-24-008 150000018

PRO-24-002



PRO-24-004

24 GHZ WAVEGUIDE SECTIONWR 42.Made of brass. L = 240 mm (length suiting parabolic dish antenna).

Frequency range: 18 - 26.5 GHz.

PRO-24-006

24 GHZ FLANGE FOR WR 42.Made of brass.

PRO-24-007

_______________________________________________________________________________________________________________




TYPE PRODUCT NO.

PRO-47-001 150000077

PRO-47-001

36 dBd, Dia. = 25 cm, F/D = 0.4.

Completely assembled parabolic dish antenna, white coated, with band

designation, waveguide, flange and subreflector.

Opening angle: 1.9°.

_______________________________________________________________________________________________________________


PRO-47-...



PRO-47-002 150000028

PRO-47-004 150000032

PRO-47-006 150000030

PRO-47-008 150000031

PRO-47-002



PRO-47-004

PRO-47-006

47 GHZ FLANGE FOR WR 19Made of brass.

PRO-47-008

47 GHZ COAXIAL/WAVEGUIDE TRANSITION(2.4 mm connector).

Made of gilt copper/brass.

_______________________________________________________________________________________________________________




TYPE PRODUCT NO.

PRO-76-001 150000078

PRO-76-001

41 dBd, dia. = 25 cm, F/D = 0.4.

Completely assembled parabolic dish antenna, white coated and with

band designation, waveguide, flange and subreflector.


_______________________________________________________________________________________________________________


PRO-76-...



PRO-76-004 150000041

PRO-76-006 150000039

PRO-76-004

76 GHz Waveguide Section,WR 12

Made of copper.

L = 91.6 mm (length suiting parabolic dish antenna).

Frequency range: 60 - 90 GHz

PRO-76-006

76 GHz Flange for WR 12

Made of brass.

_______________________________________________________________________________________________________________


PRO-145-001145 GHz Parabolic Antenna.



PRO-145-001 150000085

PRO-145-001

44 dBd, dia. = 25 cm, F/D = 0.4.

Completely assembled parabolic dishantenna, white coated, with band

designation, waveguide, flange and subreflector.


_______________________________________________________________________________________________________________


PRO-145-...



PRO-145-004 150000051

PRO-145-006 150000048

PRO-145-004

145 GHz Waveguide Section,WR 7

Made of copper.

L = 91.6 mm (length suiting parabolic dish antenna).

Frequency range: 110 - 170 GHz

PRO-145-006

145 GHz Flange for WR 7

Made of brass.

_______________________________________________________________________________________________________________


PRO GHz LIGHTWEIGHT-LINK SERIESSeries of Parabolic Antennas with Housing for Electronic Equipment for LinkApplications in the Microwave Bands


TYPE PRODUCT NO.

PRO 47-001/TSV/25/D 150000112

PRO 76-001/TSV/25/D 150000113

PRO 5.7-001/TSV/50/D 150000098

PRO 10-001/TSV/50/D 150000064

PRO 24-001/TSV/50/D 150000060

MODEL SURVEY/ORDERING DESIGNATIONS

DISH SIZE FREQUENCY GHZ

5.7 GHz5.65-5.85

10 GHz10–10.5

24 GHz24–24.25

47 GHz47–47.2

76 GHz75.5–81

25 cm incl. dome - - - PRO 47-001/TSV/25/D

PRO 76-001/TSV/25/D

48 cm incl. dome PRO 5.7-001/TSV/50/D

PRO 10-001/TSV/50/D

PRO 24-001/TSV/50/D

- -

FREQUENCY DEPENDENT SPECIFICATIONS

MODE PRO 5.7-001/TSV/50/D

PRO 10-001/TSV/50/D

PRO 24-001/TSV/50/D

PRO 47-001/TSV/25/D

PRO 76-001/TSV/25/D

FREQUENCY GHz 5.65–5.85 10–10.5 24–24.25 47–47.2 75.5–81

APPROXIMATEGAIN, .../TSV/25D

- - - 36 dBd38 dBi

41 dBd43 dBi


24 dBd26 dBi

30 dBd32 dBi

36 dBd38 dBi

- -

____________________________________________________________

PRO 10-001/TSV/50/D

SPECIFICATIONS

MODEL PRO...-001/TSV/25/D PRO...-001/TSV/50/D

ELECTRICAL

ANTENNA TYPE Parabolic dish antenna with radome, housing andmounting bracket


POLARIZATION Horizontal

SWR < 1.5 within the band

MAX. POWER 250 W

MECHANICAL

CONNECTION Antenna: SMA (female) (coaxial/waveguide transitioninside housing)Housing: N (female) (for connection of the downleadcable)

WIND SURFACE Approx. 0.05 m² Approx. 0.18 m²

WIND LOAD Approx. 64 N @ 160km/h

Approx. 228 N @ 160 km/h

COLOUR Radome: Light greyHousing, brackets: Grey

MATERIALS Parabolic dish: AluminiumWaveguide components: Brass and copperHousing: PlasticBrackets: Iron, hot galvanized

DIMENSIONS,dish diameter

250 mm 480 mm

DIMENSIONS,housing(H x W x D)

Outside: 220 x 170 x 140 mmInside: 214 x 162 x 129 mm

DIMENSIONS, totaldepth

Approx. 350 mm Approx. 400 mm

WEIGHT Approx. 4 kg

MOUNTING Mast mounting with supplied bracket on 38–65 mmmast tube

_______________________________________________________________________________________________________________

TYPICAL RADIATION PATTERN (H-PLANE)

_______________________________________________________________________________________________________________


PRO GHz LIGHTWEIGHT-LINK SERIESSeries of Parabolic Antennas with Housing for Electronic Equipment for LinkApplications in the Microwave Bands


TYPE PRODUCT NO.

PRO 47-001/TSV/25/D 150000112

PRO 76-001/TSV/25/D 150000113

PRO 5.7-001/TSV/50/D 150000098

PRO 10-001/TSV/50/D 150000064

PRO 24-001/TSV/50/D 150000060

MODEL SURVEY/ORDERING DESIGNATIONS

DISH SIZE FREQUENCY GHZ

5.7 GHz5.65-5.85

10 GHz10–10.5

24 GHz24–24.25

47 GHz47–47.2

76 GHz75.5–81

25 cm incl. dome - - - PRO 47-001/TSV/25/D

PRO 76-001/TSV/25/D

48 cm incl. dome PRO 5.7-001/TSV/50/D

PRO 10-001/TSV/50/D

PRO 24-001/TSV/50/D

- -

FREQUENCY DEPENDENT SPECIFICATIONS

MODE PRO 5.7-001/TSV/50/D

PRO 10-001/TSV/50/D

PRO 24-001/TSV/50/D

PRO 47-001/TSV/25/D

PRO 76-001/TSV/25/D

FREQUENCY GHz 5.65–5.85 10–10.5 24–24.25 47–47.2 75.5–81


- - - 36 dBd38 dBi

41 dBd43 dBi


24 dBd26 dBi

30 dBd32 dBi

36 dBd38 dBi

- -

____________________________________________________________

PRO 10-001/TSV/50/D

SPECIFICATIONS

MODEL PRO...-001/TSV/25/D PRO...-001/TSV/50/D

ELECTRICAL

ANTENNA TYPE Parabolic dish antenna with radome, housing andmounting bracket


POLARIZATION Horizontal

SWR < 1.5 within the band

MAX. POWER 250 W

MECHANICAL

CONNECTION Antenna: SMA (female) (coaxial/waveguide transitioninside housing)Housing: N (female) (for connection of the downleadcable)

WIND SURFACE Approx. 0.05 m² Approx. 0.18 m²

WIND LOAD Approx. 64 N @ 160km/h

Approx. 228 N @ 160 km/h

COLOUR Radome: Light greyHousing, brackets: Grey

MATERIALS Parabolic dish: AluminiumWaveguide components: Brass and copperHousing: PlasticBrackets: Iron, hot galvanized

DIMENSIONS,dish diameter

250 mm 480 mm

DIMENSIONS,housing(H x W x D)

Outside: 220 x 170 x 140 mmInside: 214 x 162 x 129 mm

DIMENSIONS, totaldepth

Approx. 350 mm Approx. 400 mm

WEIGHT Approx. 4 kg

MOUNTING Mast mounting with supplied bracket on 38–65 mmmast tube

_______________________________________________________________________________________________________________

TYPICAL RADIATION PATTERN (H-PLANE)

_______________________________________________________________________________________________________________


5L SMAF LOAD DC-0-25 GHzLoad DC-0-25-GHz



5L SMAF LOAD DC-0-25 GHz 210000523

5L SMAF

Load DC-0-25-GHz

Frequency: DC-25 GHz.

Typical VSWR: 1.20:1 DC-12 GHz..

Typical VSWR: 1.60:1 12GHz-25 GHz

Impedance: 50 Ω

Power (continuous): 5 W/25° C ambient.

Power (3 min.): 10 W/25° C ambient.

Connector: SMA female.

_______________________________________________________________________________________________________________


BPF 2.5G/7-...Interdigital Band-Pass Filter for the 2.5 GHz Band



BPF 2.5G/7-... 200000803

Specifications

ELECTRICAL

MODEL BPF 2.5G/7-...

FILTER TYPE Interdigital band-pass filter

CENTRE FREQUENCY To be stated within 2250 and 2750 MHz

PASS RANGE WIDTH Approx. 100 MHz

INSERTION LOSS <1.0 dB, typ.

ATTENUATION AROUNDPASSBAND

± 120 MHz rel. fc: > 60 dB


MAX. POWER 10 watts

MECHANICAL

TEMP. RANGE –30° C → +60° C

CONNECTORS SMA-female

MATERIALS Housing: Silvered brassConnectors: Goldplated CuBe

DIMENSIONS(L x W x H)

215 x 30 x 30 mm(230 x 55 x 30 mm incl. connectors, adjustmentscrews and mounting brackets)

WEIGHT Approx. 430 g

_______________________________________________________________________________________________________________

TYPICAL RESPONSE CURVES

_______________________________________________________________________________________________________________


BPF 47G/2Band-Pass Filter for the 47 GHz Band



BPF 47G/2 200001844

Specifications

ELECTRICAL

MODEL BPF 47G/2

FILTER TYPE Cavity filter

CENTRE FREQUENCY 47.088 GHz

MAX. INPUT POWER 10 W

PASS RANGE WIDTH Approx. 50 MHz

INSERTION LOSS ≤1.5 dB typ.

REJECTION fo-144 MHz Approx. 30 dB

REJECTION fo-288 MHz Approx. 50 dB

MECHANICAL

TEMP. RANGE –30°C → +60°C

CONNECTION Fits Procom waveguidePRO-47-006

DIMENSIONS (L x W x H) 20 x 20 x 26 mmincl. adj. screws.

WEIGHT Approx. 70 g

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

INSERTION LOSS

F[GHz]

_______________________________________________________________________________________________________________


BPF 10G/9Interdigital Band-Pass Filter for the 10 GHz Band


TYPE PRODUCT NO.

BPF 10G/9 200000936

SPECIFICATIONS

ELECTRICAL

MODEL BPF 10G/9


CENTRE FREQUENCY To be stated within 9.5 and 11.5 GHz


PASS RANGE WIDTH 500 MHz


ATTENUATION AROUND PASSBAND ± 400 MHz rel. fc: approx. 30 dB± 500 MHz rel. fc: approx. 60 dB

ATTENUATION OUTSIDE PASS-RANGE > 70 dB, typ. > 75–80 dB


SWR < 1.5

MECHANICAL


FREQ. STABILITY Approx. 8 ppm/° C


DIMENSIONS (L x W x H) 104 x 10 x approx. 20 mmincl. conn.

WEIGHT Approx. 100 g

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

Filters ≤ 50 mm cavities & resonators Page 19

BPF 24G/7Interdigital Band-Pass Filter for the 24 GHz Band


TYPE PRODUCT NO.

BPF 24G/7 200000801

SPECIFICATIONS

ELECTRICAL

MODEL BPF 24G/7


CENTRE FREQUENCY To be stated within 20 and 25 GHz


PASS RANGE WIDTH 1 GHz


ATTENUATION AROUND PASSBAND ± 1 GHz rel. fc: approx. 30 dB± 2 GHz rel. fc: approx. 60 dB

ATTENUATION OUTSIDE PASS-RANGE > 70 dB, typ. > 75 – 80 dB


SWR < 1.5

MECHANICAL


FREQ. STABILITY Approx. 8 ppm/° C


DIMENSIONS (L x W x H) 65 x 6.8 x approx. 18 mm incl. conn.

WEIGHT Approx. 60 g

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

_______________________________________________________________________________________________________________

Filters ≤ 50 mm cavities & resonators Page 20

PROCOM A/S

Smedetoften 12

3600 Frederikssund

Denmark

Tel: +45 48 27 84 84

Fax: +45 48 27 85 48