©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
3 in 1 Air Bubble Remover Machine
Product Link: http://www.xicart.com/latest-3-in-1-air-
bubble-remover-machine-autoclave-for-cell-phone-lcd-
refurbishment.html
©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
1. Safety rules---------------------------------
2. Specifications---------------------------------
3. Features------------------------------------
4. Operating process as Air Compressor-------
5. Operating process as Vacuum Pump-------
6. Operating process of Air bubble removing-----
7. Maintenance---------------------------------
420mm
300mm
31
0m
m
©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
1.Safety rules For your personal safety, please read the manual carefully, be
familiar with the machine's applications and limitations, as well as the
related potential danger .
A. Please read the manual carefully before usage. B. Do not start device before closing the doors.
C. Do not force to open the debubblers door or screwing the screws
before eliminateing air bubbles or existing cavity pressure.
D. Using a third ground connection,poor ground line may cause
equipment damage or endanger personal safety.
E. Only professional man can open electrical boxes.
2.Machine technicals Machine driver:AC220V 900W
Optional for AC110V /AC220V
Working environment:20-30℃,clean and dustfree.
Efficiency : 1H/80pcs(defoaming assisted type)
Heating mode: constant temperature heating
Device size:420*310*300mm
Device weight(NT):32kg
Device power:900W
Defoaming parameters
Cavity size:H 200m,Diameter 120mm(put into 15pcs 7-inch screen
one-time)
Working temperature:Suggested set 35°C~45°C(can be adjustable
according to different OCA temperature)
Defoaming time:Suggested 8~10 minutes(it is best)
©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
Air compressor parameters
Pressure: 6Mpa Tank:6.5L
Vacuum Pump parameters
Power:AC220V 50Hz 20uF 550W Rated current 2.6A
©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
3. Operation Process of Air compressor 1. Closed the door;
2. Turn on the Inflatable key ;
3. Wait the pressure from tank to get at the setting ;
4. Connect the targed machine by tube with this machine ;
5. Turn on the Valve of air compressor.
4. Operation Process of Vacuum Pump 1. Power on ;
2. Connect the targed machine by tube with this machine ;
3. Press Vacuum Bottom;
4.Handle the Vacuum Time by operator ;
5. Press Vacuum botton again when you need stop vacuum .
5. Operation Process of Bubble removing Note:The bubble will be larger after fitting, because of OCA
glue.we can remove bubbles as following tip。
1:
1. Put the LCD with OCA glue onto foam(Note stagger cable foam
of IC position)
2. Open the door and put into the tray to compartment
3. Close the door
4. Push button
5. Set the time according to remaining bubbles.
6. Push button again and take out.
2:
1. Used defoaming assisted type for debubblers.
2. Put product into the debubblers cavity, 15pcs 7-inch screen one-
time.
©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
3. Close door.
4. Set the time and press start button for debubblers. (Time suggest
10mins, temperature suggest 32 Celsius. )
5. Debubblers was deflated completely after setting time,also take
out from the door.
6. Features * Can be used by Autoclave, Air compressor, Vacuum Pump ;
* Can be working with KO No.1 Vacuum OCA Laminating machine ;
* No more installation, just plug on can start to work ;
* Small vibration, quiet, safe and durable;
* Debubblers cavity materials is 304 15mm stainless steel,safe ;
* The components are imported from Japan ;
* Simple one-touch operation ;
* Japan temperature control, temperature can be accurate to + / - 1 ℃ ;
* Debubblers mode does not affect on the operation mode of air
compressor and vacuum pump ;
©Global Cell Phone Repair Parts & LCD Refurbishing Machines Wholesale Online
Store
Tel: +86 13528895042 Mail: [email protected]
Skype: sales.xicart Website: www.xicart.com
* Small Volume. Compact and Convenient. Three functions in one
machine.
7. Maintenance Item Pay Attention
Tank check and clean odds and ends
Filter valve Regularly Release water(Suggest
one time each two weeks)
Cooling network check and clean odds and ends
Top Related