Fladungen
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen Tel.: 09778–7480-200 [email protected] www.brandverhalten.de
Prüfinstitut für das Brandverhalten von Bauprodukten, Dipl.-Ing. (FH) Andreas Hoch Bauaufsichtlich anerkannte Prüf-, Überwachungs- und Zertifizierungsstelle
P06-02-FB01 Rev05
Mitglied der
Durch die DAkkS nach DIN EN ISO/IEC 17025 akkreditiertes Prüflaboratorium. notified body no.: 1508 Die Akkreditierung gilt für die in der Urkunde aufgeführten Prüfverfahren
Prüfinstitut Hoch, Lerchenweg 1, D-97650 Fladungen
Fladungen, March 14th 2014 Georg+Otto Friedrich Wirkwarenfabrik KG z.Hd. Herrn Marco Vellmer Waldstraße 73 D-64846 Groß-Zimmern Tel. 06071 492-57 Fax 06071 492-39 [email protected]
Our sign: K-Hoch-140110-3
fire test according DIN EN 13823 (SBI) and DIN EN ISO 11925-2 (small burner) with the following materials:
PN 18553: PES-Lightbox with „INKTeX+® FL Ausrüstung“ - white polyester fabric with flame-retardant finishes and PU-coating the laboratory dertermined the following figures: thickness: ≈ 0,28 mm area weight: ≈ 191 g/m²
PN 18554: PES-Blockout with „INKTeX+® FL Ausrüstung“ - polyester fabric with flame-retardant finishes
side A: black side B: white
the laboratory dertermined the following figures: thickness: ≈ 0,28 mm area weight: ≈ 268 g/m²
Dear Mr. Vellmer,
with the delivered materials we did SBI- and Single-flame source tests with the following results:
1. Both product pass the Single-flame source tests with a flame exposure period of 30 seconds.
2. The measured value of the SBI test: a. PES-Lightbox mit „INKTeX+® FL Ausrüstung“ are in the class B-s1,d0 b. PES-Blockout mit „INKTeX+® FL Ausrüstung“ are in the class B-s2,d0.
The results are on the next pages. This short report consists of 12 pages.
futher procedure:
For a classification according DIN EN 13501-1 of the products PES-Lightbox with „INKTeX+® FL Ausrüstung“ and PES-Blockout with „INKTeX+® FL Ausrüstung“ additional SBI tests according DIN EN 13823 and single-flame source tests according DIN EN ISO 11925-2 are necessary.
However, as discussed you by phone on 03.02.2014, no further test should be performed.
The remained sample material will be disposed in the week 7.
In case you do have questions, please do not hesitate to contact us.
Yours sincerely
Tina Zitzmann
extensions: int-49-9778-7480
Andreas Hoch: -201 Jürgen Hammer: -204
Thomas Peter: -205 Tina Zitzmann: -206
Jens Rieger: -207 Diana Günzel: -202
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 2 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
1. results of the single-flame source tests according DIN EN ISO 11925-2:
From the delivered material samples were cut for the edge and surface test with the dimensions length of the sample 250 mm x width 90 mm.
The samples were conditioned according DIN EN 13238:2010 and reached constant weight.
PN 18553 PES-Lightbox with „INKTeX+® FL Ausrüstung“
edge exposure surface exposure
dim
ensio
n
flame exposure period 30 seconds
substrate material none / tested freely suspended
sample No. 1 2 3 4 5 1 2 3 4 5 --
side and direction AK BK AS BS -- AK BK AS BS BK --
ignition1) Yes Yes Yes Yes -- Yes Yes Yes Yes Yes --
sart of flame formation1) 1 1 1 1 -- 3 3 3 3 3 s
top flames at the limit1)2) -/- -/- -/- -/- -- -/- -/- -/- -/- -/- s
max. flame height 5 9 7 7 -- 7 12 10 6 11 cm
time 1)2) 5 4 3 4 -- 5 10 8 5 8 s
self-extinguishing of the flames 1) 6 5 4 5 -- 9 12 14 9 12 s
the flames was extinguished after1) -/- -/- -/- -/- -- -/- -/- -/- -/- -/- s
smoke development (visually) high high --
ignition of the filter paper1)2) -/- -/- -/- -/- -- -/- -/- -/- -/- -/- s
The material was cone-shaped or drop-shaped burned / discolored with a max. width of 2,7 cm x height 12,0 cm.
1) time from the beginning
2) within 60 Seconds
-/- no occurance -- no data K = warp direction S = weft direction A = side A B = side B
notes:
The material pass the freely suspended single-flame source tests, with a flame exposure period of 30 seconds and an observation period of 60 seconds.
The measure mark of 15 cm was not exceeded.
For a classification according DIN EN 13501-1 additional single-flame source tests according DIN EN ISO 11925-2 are necessary.
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 3 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
PN 18554 PES-Blockout with „INKTeX+® FL Ausrüstung“
edge exposure surface exposure
dim
ensio
n
flame exposure period 30 seconds
substrate material none / tested freely suspended
sample No. 1 2 3 4 5 1 2 3 4 5 --
side and direction AK BK AS BS -- AK BK AS BS -- --
ignition1) Yes Yes Yes Yes -- Yes Yes Yes Yes -- --
sart of flame formation1) 1 1 1 1 -- 3 4 4 3 -- s
top flames at the limit1)2) -/- -/- -/- -/- -- -/- -/- -/- -/- -- s
max. flame height 10 4 12 11 -- 10 9 12 10 -- cm
time 1)2) 6 3 7 6 -- 7 8 11 11 -- s
self-extinguishing of the flames 1) 7 4 13 8 -- 9 15 15 14 -- s
the flames was extinguished after1) -/- -/- -/- -/- -- -/- -/- -/- -/- -- s
smoke development (visually) high high --
ignition of the filter paper1)2) -/- -/- -/- -/- -- -/- -/- -/- -/- -- s
The material was cone-shaped or drop-shaped burned / discolored with a max. width of 2,6 cm x height 10,0 cm.
1) time from the beginning
2) within 60 Seconds
-/- no occurance -- no data K = warp direction S = weft direction A = side A B = side B
notes:
The material pass the freely suspended single-flame source tests, with a flame exposure period of 30 seconds and an observation period of 60 seconds.
The measure mark of 15 cm was not exceeded.
For a classification according DIN EN 13501-1 additional single-flame source tests according DIN EN ISO 11925-2 are necessary.
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 4 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
2. Results of the SBI-test according DIN EN 13823:2010:
preperation and conditioning of the samples
The samples were conditioned according DIN EN 13238:2010 and reached constant weight. The samples were weighed again after 24 h and showed a mass loss of less than 0,1 g.
arrangement of the samples by the SBI-tests:
a. The samples were fixed on the specimen holder according to EN 14716: 2004 (D): “Stretched ceilings – Requirements and test methods”; see also sketch in appendix 1.
b. Mounting of the backing board according DIN EN 13823, topic 4.4.10.
c. The distance of the backing board (calcium silicate board: 11 ± 2 mm, 870 ± 50 kg/m³ according to 13238:2010) was 80 mm.
d. The lateral closing plate from the SBI trolley were removed according to DIN EN 13823 / 5.2.2 a and article 4.4.11.
Mounting and fixing
EN 14716: 2004 (D): “Stretched ceilings – Requirements and test methods”
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 5 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
results of the indicative SBI-tests:
test-no.: SBI_3987 SBI_3986 limit values according
DIN EN 13501-1
name: PES-Lightbox with
„INKTeX+® FL Ausrüstung“
PES-Blockout with „INKTeX+® FL Ausrüstung“
--
date of test: 20.01.2014 20.01.2014 -- sample-no.: PN 18553 PN 18554 -- flame impingement: side A / warp direction -- maximum heat release: 1,6 kW (average value) 1,6 kW (average value) --
FIGRA_02 MJ 0,00 W/s 0,00 W/s ≤ 120 W/s for class A2 ≤ 120 W/s for class B
FIGRA_04 MJ 0,00 W/s 0,00 W/s ≤ 250 W/s for class C ≤ 750 W/s for class D
THR 600s 0,28 MJ 0,28 MJ ≤ 7,5 MJ for class A2 ≤ 7,5 MJ for class B ≤ 15 MJ for class C
SMOGRA 0,00 m²/s² 6,54 m²/s² ≤ 30 m²/s² for s1 ≤ 180 m²/s² for s2
TSP 600s 23,07 m² 52,03 m² ≤ 50 m² for s1 ≤ 200 m² for s2
LFS < edge of specimen < edge of specimen
lateral flame spread no longer then the outside edge of the specimen
(big specimen wing) for class A2 up to C
FDP 0 s 0 s FDP < 10 second (d1) FDP > 10 second (d2)
d0 / d1 / d2 d0 d0
d0 = no flaming droplets within 600sec d1 = no flaming droplets longer than 10 sec within 600 sec d2 = neither do nor d1
photos and graphs on page:
7 up to 9 10 up to 12 --
possible classification: B-s1,d0 B-s2,d0 --
notes to the tables:
Figra0,2MJ: Fire Growth Rate in consideration of the total heat release threshold of 0,2 MJ [W/s] Figra0,4MJ: Fire Growth Rate in consideration of the total heat release threshold of 0,4 MJ [W/s] THR600s: Total heat released over the first 10 minutes [MJ] SMOGRA: Smoke Growth Rate [m²/s²] TSP600s: Total smoke production over the first 10 minutes [m²] LSF: lateral flame spread
FDP: flaming droplets / particles [s]
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 6 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
commentary the results:
SBI_3987: PES-Lightbox with „INKTeX+® FL Ausrüstung“
heat release: For this test, the measured data of heat release (FIGRA-result and THR-result) reach the class B.
smoke production:
Concerning the smoke development, the SMOGRA-result and TPS-result reach the smoke class s1.
droplets / particles:
The product does not showed flaming droplets and would be thus classified in d0.
SBI_3986: PES-Blockout with „INKTeX+® FL Ausrüstung“
heat release: For this test, the measured data of heat release (FIGRA-result and THR-result) reach the class B.
smoke production:
Concerning the smoke development, the SMOGRA-result reach the smoke class s1. But the total smoke production (TSP600s) of the product is above the limit of 50m² for the smoke class s1, thus the product can only be classified in the smoke class s2.
notes: The smoke class s1 can be achieved with the adoption of the alternative smoke calculation method according EN 13823:2010 topic A.6.1.2.
It must be performed on the same day then the sample material is tested, an additional test with calcium silicate board. Thereby it comes to a lager scope of tests and additional costs. Furthermore it is listed in the classification report that the smoke class dis obtained with the alternative method.
droplets / particles:
The material ignited once again after 673 seconds flame impingement. Some parts of the material fall down outside the burner area and burned longer than 10 seconds.
However the product must be classified in this test as non- burning droplet, because it was outside the observation period of 600 seconds. The product would be classified in this test in d0.
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 7 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
SBI_3987
PES-Lightbox with „INKTeX+® FL Ausrüstung“ flame impingement: side A / warp direction
photo before the test
photo after the test
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 8 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
SBI_3987 PES-Lightbox with „INKTeX+® FL Ausrüstung“
flame impingement: side A / warp direction
0
10
20
30
40
50
60
20,6
20,65
20,7
20,75
20,8
20,85300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
Tem
p. [C
°]
Sau
ers
toff
[ %
]
[Zeit]
Sauerstoff/ Temp.
O2 Temperatur
VN3987_PES-Lightbox_PN18553_0120
0,00Figra 02 [W/s]
Figra 04 [W/s]
THR 600 s [MJ]
0,00
0,28
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
HR
R , H
RR
av [
kw
]
[Zeit]
HRR, HRR av (t)
3 KW HRR av HRR
VN3987_PES-Lightbox_PN18553_0120
0,00
0,00
0,28
Figra 02 [W/s]
Figra 04 [W/s]
THR 600 s [MJ]
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 9 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
SBI_3987 PES-Lightbox with „INKTeX+® FL Ausrüstung“
flame impingement: side A / warp direction
0%10%20%30%40%50%60%70%80%90%
100%300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
[ %
]
[ Zeit ]
Licht VN3987_PES-Lightbox_PN18553_0120
Smogra [m²/s²]
TSP
0,00
23,07
0
0,02
0,04
0,06
0,08
0,1
0,12
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
SP
R ,
SP
R a
v [
m²/
s ]
[ Zeit ]
SPR,SPR av ( t )
SPR SPR av SPR 0,1m²/s
VN3987_PES-Lightbox_PN18553_0120
TSP
0,00
23,07
Smogra [m²/s²]
0
10
20
30
40
50
60
0
5
10
15
20
25
30
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
TS
P t
[ m
² ]
SM
OG
RA
[ m
²/s
² ]
[ Zeit ]
Smogra / TSP ( t )
SMOGRA TSP TSP 6 m²
VN3987_PES-Lightbox_PN18553_0120
23,07
0,00Smogra [ m²/s²]
TSP 600s
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 10 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
SBI_3986 PES-Blockout with „INKTeX+® FL Ausrüstung“
flame impingement: side A / warp direction
photo before the test
photo after the test
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 11 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
SBI_3986 PES-Blockout with „INKTeX+® FL Ausrüstung“
flame impingement: side A / warp direction
0
10
20
30
40
50
60
20,6220,6420,6620,68
20,720,7220,7420,7620,78
20,820,82
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
Tem
p. [C
°]
Sau
ers
toff
[ %
]
[Zeit]
Sauerstoff/ Temp.
O2 Temperatur
VN3986_PES-Blockout_PN18554_0120
0,00Figra 02 [W/s]
Figra 04 [W/s]
THR 600 s [MJ]
0,00
0,28
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
HR
R , H
RR
av [
kw
]
[Zeit]
HRR, HRR av (t)
3 KW HRR av HRR
VN3986_PES-Blockout_PN18554_0120
0,00
0,00
0,28
Figra 02 [W/s]
Figra 04 [W/s]
THR 600 s [MJ]
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
page 12 of 12 of the short report K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
SBI_3986 PES-Blockout with „INKTeX+® FL Ausrüstung“
flame impingement: side A / warp direction
0%10%20%30%40%50%60%70%80%90%
100%300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
[ %
]
[ Zeit ]
Licht VN3986_PES-Blockout_PN18554_0120
Smogra [m²/s²]
TSP
6,54
52,03
0
0,05
0,1
0,15
0,2
0,25
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
SP
R ,
SP
R a
v [
m²/
s ]
[ Zeit ]
SPR,SPR av ( t )
SPR SPR av SPR 0,1m²/s
VN3986_PES-Blockout_PN18554_0120
TSP
6,54
52,03
Smogra [m²/s²]
0
10
20
30
40
50
60
70
80
90
100
0
5
10
15
20
25
30
35
40
45
50
300
360
420
480
540
600
660
720
780
840
900
960
1020
1080
1140
1200
1260
1320
1380
1440
1500
TS
P t
[ m
² ]
SM
OG
RA
[ m
²/s
² ]
[ Zeit ]
Smogra / TSP ( t )
SMOGRA TSP TSP 6 m²
VN3986_PES-Blockout_PN18554_0120
52,03
6,54Smogra [ m²/s²]
TSP 600s
Prüfinstitut Hoch
Lerchenweg 1 D-97650 Fladungen
Anlage 1 zum Kurzbericht K-Hoch-140110-3
P06-02-FB01 Rev05
Fladungen
Top Related