• Flexible circuit design These D iode modu les provide complete powercontrol in a single package, up to 100 Ampsvarious circuit design with connections forpanel mounting or Fast on. Ceramic base with 2500 Vrms isolation.UL recognition pending.
POWER CONTROL SOLUTIONS
CES SERIES
ELECTRICAL SPECIFICATION 50 100
SYMBOL SPECIFICATION RATINGS
ID Maximum DC Output Current (Tc = 85°C)
VF Maximum Voltage Drop @ Amps Peak 1.35V @ IF=60A 1.2V @ IF=100A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs] 500V/µs
600 (240 Vac)
VRRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 800A 1500A
I2T Maximum I2T for Fusing (t=8.3ms) [A2 sec] 2650
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 0.45°C/W 0.30°C/W
VISOL Isolation Voltage 2500 VRMS 2500 VRMS
MECHANICAL SPECIFICATIONS
Weight: (typical) 4.7 oz. (163g)
PART NUMBER IDENTIFICATION
500V/µs
9350
60 Amps 100 Amps
EX.: CESB50/12
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support
Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
• Low profile
• Terminals in fast on or Screw format
Circuit Type Current Voltage
CES - Case style 06 - 60008 - 80010 - 100012 - 1200
50 - 60 Amps100 - 100 Amps
Circuit Type
( See schematics diagram )
14 - 140016 - 1600
1400 (530 Vac)1600 (600 Vac)
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales SupportC3 Semiconductors, LLC. 501 West Broadway Street Suite 800, San Diego, CA 92101Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
AC
AC
AC
+
--
AC
AC
+
--
AC
+
--
AC
+
ACAC
AC
AC +
B
H
D
E G
Flexible mounting, for Printed Circuit Board or Panel These m o d u l e s provide complete powercontrol in a single package, up to 42.5 Ampsvarious circuit design with connections forprinted circuit board or panel mounting. Ceramic base with 2500 Vrms isolation.UL recognition pending.
POWER CONTROL SOLUTIONS
T SERIES
ELECTRICAL SPECIFICATION 5 6
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.80V @ IF=25A 1.60V @ IF=42.5A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/μs 100A/μs
dv/dt Critical Rate of Rise of Off-State Voltage [V/μs] 200V/μs
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 300A 600A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec] 375
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 0.9°K/W 0.7°K/W
V ISOL Isolation Voltage 2500 V RMS 2500 V RMS
MECHANICAL SPECIFICATIONS
Weight: (typical) 1.7 oz. (43g)
PART NUMBER IDENTIFICATION
200V/μs
1500
25 Amps 42.5 Amps
EX.: CT674
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support
Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
Low profile
Terminals in fast on or pin format
Current Circuit type Voltage
T - Case style 1 - 1202 - 2403 - 2804 - 480
5 - 25 Amps6 - 42.5 Amps
Circuit Type
( See schematics diagram )
Any type of BridgeFree Wheeling Diode “F”
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
SERIES T CIRCUITS
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
+
--
AC1
AC2
G1 G2
+
--
AC1
AC2
G1 G2
+
--
AC1
AC2
G3 G4
G2G1
1 2 4
Package Dimensions mm SIDE 5 and 6 Models
1
G1
7
2
3
High Thermal EfficiencyComplete Power ControlCircuits in a SinglePackage
These modu les provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CSDH SERIES
ELECTRICAL SPECIFICATION 100 160
MECHANICAL SPECIFICATIONS
Weight: (typical)
PART NUMBERIDENTIFICATION
Series Type Half Controlled Current Circuit Type Voltage
CSD-Case style (see schematicdiagram)
Three Phase BridgeHalf ControlledRectifier Bridge
16 - 1600
12 - 120014 - 1400
100 - 110 Amps160 - 170 Amps
EX.: CSDH160/16
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact:USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689For recommended applications and more information contact:USA : Sales Support
H
sgnitaR mumixaMsnoitidnoC tseTlobmyS
IdAV TC = 85 1011eludom ;C 70 AIFRMS, ITRMS A9885gel rep
IFSM, ITSM TVJ = 45 C; t = 10 ms (50 Hz), sine 1150 1500 AVR = 0 t = 8.3 ms (60 Hz), sine 1230 1600 A
TVJ = TVJM t = 10 ms (50 Hz), sine 1000 1350 AVR = 0 t = 8.3 ms (60 Hz), sine 1070 1450 A
I2t TVJ = 45 C t = 10 ms (50 Hz), sine 6600 11200 A2sVR = 0 t = 8.3 ms (60 Hz), sine 6280 10750 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 5000 9100 A2sVR = 0 t = 8.3 ms (60 Hz), sine 4750 8830 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 50 A 150 A/ sf =400 Hz, tP =200 sVD = 2/3 VDRMIG = 0.3 A, non repetitive, 500 A/ sdiG/dt = 0.3 A/ s, IT = 1/3 • IdAV
(dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM 1000 V/ sRGK = ; method 1 (linear voltage rise)
VRGM 10 V
PGM TVJ = TVJM tp = 30 s 10 WIT = ITAVM tp = 500 s 5 W
tp = 10 ms 1 WPGAVM 0.5 WTVJ -40...+125 CTVJM 125 CTstg -40...+125 C
VISOL ~V0052nim 1 = tSMR ,zH 06/05IISOL ~V0003s 1 = tAm 1
Md 5)6M( euqrot gnitnuoM 15 % NmTerminal connection torque (M6) 5 15 % Nm
Weight typ. 265 g
High Thermal EfficiencyComplete Power ControlCircuits in a SinglePackage
These modu les provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CSDH SERIES
ELECTRICAL SPECIFICATION 100 160
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact:USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689For recommended applications and more information contact:USA : Sales Support
seulaV citsiretcarahCsnoitidnoC tseTlobmyS
IR, ID VR = VRRM; VD = VDRM TVJ = TVJM 5 mATVJ = 25 C 0.3 mA
VF, VT IF, IT = 200 A, TVJ = 25 C 1.75 1.57 V
VT0 For power-loss calculations only 0.85 0.85 VrT (TVJ = 125 m5.36)C
VGT VD = 6 V; TVJ = 25 C 1.5 VTVJ = -40 C 1.6 V
IGT VD = 6 V; TVJ = 25 C 100 mATVJ = -40 C 200 mA
VGD TVJ = TVJM; VD = 2/3 VDRM 0.2 VIGD TVJ = TVJM; VD = 2/3 VDRM 5 mA
IL IG = 0.3 A; tG = 30 s TVJ = 25 C 450 mAdiG/dt = 0.3 A/ s
IH TVJ = 25 C; VD = 6 V; RGK = 200 mA
tgd TVJ = 25 C; VD = 1/2 VDRM 2 sIG = 0.3 A; diG/dt = 0.3 A/ s
RthJC per thyristor (diode); DC current 0.65 0.46 K/WW/K770.0801.0eludom rep
RthJH per thyristor (diode); DC current 0.8 0.55 K/WW/K290.0331.0eludom rep
dS mm01ecafrus no ecnatsid gnipeerCdA mm4.9ria ni ecnatsid egapeerCa s/m05noitarelecca elbawolla .xaM 2
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
SERIES CSDHCIRCUIT
Package Dimensions for 100 and 160 Amp Models
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact:USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689For recommended applications and more information contact:USA : Sales Support
A
B
EDC
2 3 1
M6x10
73
30
27 6.5
6.5C ~ D ~ E ~
A + B -
54
15
122566
26 26728094
45
6
3
1
2
10-3 10-2 10-1 100 101100
200
300
400
500
600
700
800
900A
s
IFSM
t
50 Hz80% VRRM
TVJ = 45°C
TVJ = 125°C
Fig. 3 Surge overload current IFSM: Crest value, t: duration
VVZ 110
10-3 10-2 10-1 100 1010.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
st
K/W
ZthJC
Fig. 4 Transient thermal impedancejunction to case (per leg)
VVZ 110
0 50 100 1500
20
40
60
80
100
120
A
IdAV
°CTC
Fig. 2 DC output current at casetemperature
VVZ 110
Fig. 1 Gate trigger characteristics
1 10 100 10000.1
1
10
IG
VG
mA
1: IGT, TVJ = 125°C2: IGT, TVJ = 25°C3: IGT, TVJ = -40°C
V
4: PGAV = 0.5 W5: PGM = 5 W6: PGM = 10 WIGD, TVJ = 125°C
4
2
15
63
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CSD SERIES
ELECTRICAL SPECIFICATION 160 210 250
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.65V @ IF=300A 1.43V @ IF=300A 1.43V @ IF=300A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs] 1000V/µs
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)1400 (530 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 1800A 2200A 2750A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec] 16200 45000
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 0.65°K/W 0.45°K/W 0.45°K/W
V ISOL Isolation Voltage 2500 V RMS 2500 V RMS 2500 V RMS
MECHANICAL SPECIFICATIONS
Weight: (typical) 9.5 oz. (270g)
PART NUMBER IDENTIFICATION
1000V/µs 1000V/µs
36000
Series Type Current VoltageCSD-Case style 06 - 600
- 0 Amps02 - 210
0 Amps25 -250
08 - 800180 10 - 1000
1600 (600 Vac)
16 - 1600
160 Amps
180 Amps 250 Amps200 Amps
12 - 120014 - 1400
62 - 60 Amps82 - 80 Amps
EX.: CSD250/16
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support
Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CSD SERIES
ELECTRICAL SPECIFICATION 62 82
MECHANICAL SPECIFICATIONS
Weight: (typical)
PART NUMBER IDENTIFICATION
Series Type Current Circuit Type VoltageCSD-Case style (see schematic 06 - 600
- 0 Amps02 - 210
0 Amps25 -250
diagram) 08 - 800180 10 - 1000Three Phase Bridge
16 - 1600
160 Amps12 - 120014 - 1400
62 - 60 Amps82 - 80 Amps
EX.: CSD250/16
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.8V @ IF=150 1.6V @ IF=150A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs] 1000V/µs
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)1400 (530 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 550 A 740 A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec] 1520
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 1.45°K/W 1.1°K/W
V ISOL Isolation Voltage 2500 V RMS 2500 V RMS
1000V/µs
2800
1600 (600 Vac)
60 Amps 80 Amps
5.64 oz. (160g)
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
AC
AC
AC
+
--
SERIES CSD CIRCUIT
Package Dimensions for 180-250 Amp Models
Package Dimensions for 60 and 80 Amp Models
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Threestandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
MECHANICAL SPECIFICATIONS
Weight: (typical) 0.75 oz. (21g)
Series Type Circuit Type Current Voltage
CS-Case style 06 - 600-
08 - 80035
10 - 1000
16 - 1600
35 Amps
12 - 120014 - 1400
B - Single phaseD - Three phase
POWER CONTROL SOLUTIONS
25 - 35 Amp • DIODE Module
ELECTRICAL SPECIFICATIONS
PART NUMBER IDENTIFICATION
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
Ex.: CSD35/16
- 25 25 Amps
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.05V @ IF=17.5A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs]
800 (280 Vac)V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)
1200 (480 Vac)1400 (530 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 500A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec]
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 1.2°C/W
V ISOL Isolation Voltage 2500 V RMS
1000V/µs
1000
1600 (600 Vac)
35 Amps
600 (240 Vac)
25 Amps
1.1V @ IF=12.5A
350A
374
1.3°C/W
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Threestandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
Series Type Circuit Type Current Voltage
CS-Case style 06 - 600-
08 - 80035
10 - 1000
16 - 1600
35 Amps
12 - 120014 - 1400
B - Single phaseD - Three phase
POWER CONTROL SOLUTIONS
25 - 35 Amp • DIODE Module
PART NUMBER IDENTIFICATION
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
Ex.: CSD35/16
- 25 25 Amps
MECHANICAL DIMENSIONSSERIES CS CIRCUITS
16 8
6.25 6.25
10
φ
Dimmensions in mm.
AC
AC
+
--
AC
AC
AC
+
B
D
--
F
7 F
F
7
G
7 F
80
F
F8
H
8
H
I I
High Thermal Ef�ciencyComplete Power ControlCircuits in a SinglePackage
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal ef�ciency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CMDS SERIES
ELECTRICAL SPECIFICATION 160 210 250
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.65V @ IF=300A 1.43V @ IF=300A 1.43V @ IF=300A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs 100A/µs
dv/dt Critical Rate of Rise of O�-State Voltage [V/µs] 1000V/µs
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)1400 (530 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 1800A 2200A 2750A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec] 16200 45000
RqJC Maximum Thermal Resistance Junction toCeramic Base per Chip 0.65°K/W 0.45°K/W 0.45°K/W
V ISOL Isolation Voltage 2500 V RMS 2500 V RMS 2500 V RMS
MECHANICAL SPECIFICATIONS
Weight: (typical) 9.5 oz. (270g)
PART NUMBER IDENTIFICATION
1000V/µs 1000V/µs
36000
Series Type Current Circuit Type VoltageCMDS-Case style (see schematic 06 - 600
-0 Amps02- 2100 Amps25-250
diagram) 08 - 800180 10 - 1000Three Phase Bridge
1600 (600 Vac)
16 - 1600
160 Amps
180 Amps 250 Amps200 Amps
12 - 120014 - 1400
62 - 60 Amps82 - 80 Amps
EX.: CMDS250/16
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact:USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689For recommended applications and more information contact:USA : Sales Support
High Thermal Ef�ciencyComplete Power ControlCircuits in a SinglePackage
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal ef�ciency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CMDS SERIES
ELECTRICAL SPECIFICATION 62 82
MECHANICAL SPECIFICATIONS
Weight: (typical)
PART NUMBER IDENTIFICATION
Series Type Current Circuit Type VoltageCSD-Case style (see schematic 06 - 600
-0 Amps02- 2100 Amps25-250
diagram) 08 - 800180 10 - 1000Three Phase Bridge
16 - 1600
160 Amps12 - 120014 - 1400
62 - 60 Amps82 - 80 Amps
EX.: CMDS250/16
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact:USA : Sales SupportC3 Semiconductors, LLC. 501 West Broadway Street, Suite 800, San Diego CA 92101Email : [email protected]
(888) 882-8689For recommended applications and more information contact:USA : Sales Support
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.8V @ IF=150 1.6V @ IF=150A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs
dv/dt Critical Rate of Rise of O�-State Voltage [V/µs] 1000V/µs
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)1400 (530 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 550 A 740 A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec] 1520
RqJC Maximum Thermal Resistance Junction toCeramic Base per Chip 1.45°K/W 1.1°K/W
V ISOL Isolation Voltage 2500 V RMS 2500 V RMS
1000V/µs
2800
1600 (600 Vac)
60 Amps 80 Amps
5.64 oz. (160g)
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
AC
AC
AC
+
--
SERIES CMDS CIRCUIT 3 PHASE
Package Dimensions for 150-250 Amp Models
Package Dimensions for 25 and 100 Amp Models
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact:USA : Sales SupportC3 Semiconductors, LLC. 501 West Broadway Street Suite 800, San Diego CA 92101Email : [email protected]
(888) 882-8689For recommended applications and more information contact:USA : Sales Support
Package Dimensions TOP 25-50 Amp Models
Package Dimensions SIDE 25 and 50 Amp Models
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Onestandard model, provides 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
ELECTRICAL SPECIFICATIONS 160
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.43V @ IF=300A
TJ Operating Junction Temperature Range -40°C to +150°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs]
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)1400 (530 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 1500 A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec]
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 0.73°K/W
V ISOL Isolation Voltage 2500 V RMS
MECHANICAL SPECIFICATIONSWeight: (typical) 6.21 oz. (176g)
1000V/µs
9300
1600 (600 Vac)
160 Amps
PART NUMBER IDENTIFICATION
Current Series Type Circuit Type Voltage
MT - Case style (see schematic 60 - 600-diagram) 80 - 800
160
100 - 1000Three Phase Bridge
160 - 1600
160 Amps
120 - 1200140 - 1400
POWER CONTROL SOLUTIONS
EX.: 160MT120C3
C3 SemiconductorsC3
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
160 AMP THREE PHASE BRIDGE
160MT Series
AC
AC
AC
+
--
MECHANICAL DIMENSIONS
SERIES 160MT CIRCUIT
2
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Onestandard model, provides 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
PART NUMBER IDENTIFICATION
Current Series Type Circuit Type Voltage
MT - Case style (see schematic 60 - 600-diagram) 80 - 800
160
100 - 1000Three Phase Bridge
160 - 1600
160 Amps
120 - 1200140 - 1400
POWER CONTROL SOLUTIONS
EX.: 160MT120C3
C3 SemiconductorsC3
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
--
160MT Series160 AMP THREE PHASE BRIDGE
• High Thermal Efficiency
• Complete Power Control Circuits in a Single Package
These m o d u l e s provide complete powercontrol in a single package, utilizinghigh thermal efficiency to assure longlife and reliable performance. Sixstandard models provide 2500 Vrmsisolation from all terminals to ceramicbase and are UL recognition pending.
POWER CONTROL SOLUTIONS
CMD SERIES
ELECTRICAL SPECIFICATION 25 40
SYMBOL SPECIFICATION RATINGS
I D Maximum DC Output Current (Tc = 85°C)
V F Maximum Voltage Drop @ Amps Peak 1.65V @ IF=25A 1.60V @ IF=40A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs] 500V/µs
400 (120 Vac)600 (240 Vac)
V RRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 250A 600A
I2T Maximum I 2T for Fusing (t=8.3ms) [A 2 sec] 260
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 0.9°K/W 0.7°K/W
V ISOL Isolation Voltage 2500 V RMS 2500 V RMS
MECHANICAL SPECIFICATIONS
Weight: (typical) 1.7 oz. (43g)
PART NUMBER IDENTIFICATION
500V/µs
1500
Series Type Current VoltageCMD-Case style 06 - 600
08 - 80010 - 1000
25 Amps 40 Amps
12 - 1200
25 - 25 Amps40 - 40 Amps
EX.: CMD25/12
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support
Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
SERIES CMD CIRCUIT
Package Dimensions TOP 25-40 Amp Models
Package Dimensions SIDE 25 and 40 Amp Models
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
• Flexible mounting, for Printed Circuit Board or Panel These modu les provide complete powercontrol in a single package, up to 42.5 Ampsvarious circuit design with connections forprinted circuit board or panel mounting. Ceramic base with 2500 Vrms isolation.UL recognition pending.
POWER CONTROL SOLUTIONS
CLD SERIES
ELECTRICAL SPECIFICATION 25 40
SYMBOL SPECIFICATION RATINGS
ID Maximum DC Output Current (Tc = 85°C)
VF Maximum Voltage Drop @ Amps Peak 1.65V @ IF=25A 1.60V @ IF=42.5A
TJ Operating Junction Temperature Range -40°C to +125°C
di/dt Critical Rate of Rise of On-State Current @ TJ=125°C 100A/µs 100A/µs
dv/dt Critical Rate of Rise of Off-State Voltage [V/µs] 500V/µs
400 (120 Vac)600 (240 Vac)
VRRM Repetitive Peak Reverse Voltage (AC Line) 1000 (380 Vac)1200 (480 Vac)
ITSM Maximum Non-Repetitive Surge Current(1/2Cycle, 60Hz) 300A 600A
I2T Maximum I2T for Fusing (t=8.3ms) [A2 sec] 375
RqJC Maximum Thermal Resistance Junction to Ceramic Base per Chip 0.9°K/W 0.7°K/W
VISOL Isolation Voltage 2500 VRMS 2500 VRMS
MECHANICAL SPECIFICATIONS
Weight: (typical) 1.7 oz. (43g)
PART NUMBER IDENTIFICATION
500V/µs
1500
25 Amps 42.5 Amps
EX.: CLDA25/12F
Power Modules
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales Support
Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
• Low profile
• Terminals in fast on or pin format
Circuit Type Current Voltage
CLD - Case style 06 - 60008 - 80010 - 100012 - 1200
25 - 25 Amps40 - 42.5 Amps
Circuit Type
( See schematics diagram )
Any type of BridgeFree Wheeling Diode “F”
MECHANICAL DIMENSIONS AND CIRCUIT DIAGRAM
SERIES CLD CIRCUITS
C3 Semiconductors, LLC. All rights are reserved
WEB SITE: http://www.C3semi.com
For recommended applications and more information contact: USA : Sales SupportC3 Semiconductors, LLC. 2320 Paseo de las Americas, Ste. 104, San Diego, CA 92154Email : [email protected]
(888) 882-8689
For recommended applications and more information contact: USA : Sales Support
+
--
AC1
AC2
G1 G2
+
--
AC1
AC2
G1 G2
+
--
AC1
AC2
G3 G4
G2G1
A B C
Package Dimensions mm SIDE 25 and 40 Models
Package Dimensions mm TOP 25 and 40 Models
ul
Top Related