Download - Calibratiion Format

of 15

CHECKLIST OF EQUPMENTS

Sl. NoTS

EQUIPMENT DESCRIPTIONAs per contract Available Calibration Due date of Shortfall/

Remarks

S/No requirement in lab done calibration excess

1 1/d Pan balance with full set of weight capacity 5Kg 4 Set 1 Set Yes 2/4/2010 3 Set

2 1/b 600 gm capacity semi- indicating electronic type ,2 Set 1 Set Yes 2/4/2009 1 Set

2Kg/ electronic avail

accuracy:0.01gms acc:0.01gms

3 1/a 7 to 10 Kg capacitty semi- indicating electronic type2 Set 1 Set Yes 2/4/2009 1 Set

30Kg/ electronic avail

accuracy:1 gm acc:0.1gms

4 1/c Chemical balance 100 gms capacity1 Set _ _ _ 1 Set

Not available in

accuracy:0.0001gms laboratory

5 2/a Ovens electrically operated themostatically controlled

1 Set 1 Set Yes – –

Spot calibration done

including thermometer stainless steel interior during inspection

range ambient to 300ºCsensitivity 1ºC,capacity:120 ltr

6 3 Sieves as per IS 2386/PART1

Not specified 1 Set Yes – –


3/a Standard test size 450 mm dia complete with lid and pan during inspection

of sieve size 40,25,20,16,12.5,10,4.75,2.36.mm

3/c Standard test size 200 mm dia complete with lid and pan1 Set Yes – _


during inspection

7 4 Complete of taking 200 mm and 450 mm dia sieves

1 Nos 1 Nos – – –

Spot inspection done

electrically operated with time switch assembly as per IS 1440 RPM

specification

8 5 200 tonnes compressive testing machine electrically cum

1 Nos 1 Nos Yes 19/12/2008 _

Calibration report

manually operated fitted with 3 dial gauges attached

0-2000X10 KN;0-1000X5KN;0-500X2.5KN

7 8/d Circular plates of 200 mm dia 6 Nos 8 Nos Yes – – Spot calib done

8 52 Vicat's needle apparatus for setting time with plunger 1 Set 1Set Yes _ _


as per IS 269-1968 during inspection

9 6/a Soundness testing apparatus for cement 1 Set 3 Set Yes – 2 Set Spot calib done

10 53/b 150 mm cube mould and 100 mm (each size) as per IS Spot calibration done

150mm cube mould with base plate 36 Nos 36 Nos Yes – during inspection

100mm cube mould with base plate 36 Nos 06 Nos Yes – 30 Nos do

70.6mm cube mould with base plate – 12 Nos Yes – 12 Nos do

50mm cube mould with base plate – 09 Nos Yes – 09 Nos do

11 54 High frequency mortar cube vibrator for cement testing 1 Nos 1 Nos – – – Spot inspection done

12 60 LOS ANGELES apparatus as per IS 2386/PART IV 1 Nos – – – – Not available in lab

13 62 Equipment for slump test (C-143) compacting factor 4 Set 4 Set Yes – –

Slump cone avail

apparatus complete Spot inspection done

14 Electrically operated and thermostatically controlled1 Nos 1 Nos No – –

Calibration not

waterbath, sensitivity 1ºC done

15Steel trowels

Not specified2 Nos – – –

Not RequiredSmall

Medium 5 Nos – – –

Big 1 Nos – – –

of sieve size 4.75,2.36,1.18,1mm,600,300,250,150,125,90, 75mic.

of 15

Sl. NoTS


Remarks


Contractor's Representative Consultant's Representative

16 12 Spatula set of 100mm and 200 mm long

2 Nos – – – 2 Nos Not Required100mm

200mm 2 Nos 2 Nos – – –

17 40/b Glass type (mercury in glass) themometer in range of 2 Nos 1 Nos – – 1 Nos Not Required

0-110ºC

18 Digital thermometer Not specified 1 Nos Yes – 1 Nos Not Required

19 Stop watch Not specified 1 Nos – – 1 Nos Not Required

20 55 Concrete mixer power driven ,capacity 1cft(tilting) 1 Nos 1 Nos Yes – – Not Required

21 33 Aggregate impact value testing apparatus as per1 Nos 1 Nos Yes – –


IS :2386/PART IV-1964 during inspection

22 31 Flakiness and elongation test gauges as per IS 23862 Nos 1 Nos Yes – –


PART 1 -1963 during inspection

23 34/a Specific gravity determination test apparatus 2 Set 2 Set – – – Not Required

with pycnometer bottle

34/b A wire busket of not more than 6.3 mm mesh 1 Nos 1 Nos – – – Spot inspection done

24 7 Hot plate 200 mm dia-1500 watt 1 Nos 1 Nos Not Required – – Spot inspection done

2532 Standard measure of 30,15,3 ltr capacity

2 Sets 2 Sets Yes

– –

3ltr-150mm dia/170mm ht/3.15mm thk

15ltr-250mm dia/300 mm ht/4.00mm thk

30 ltr-350mm dia/300mm ht/5.00mm thk

26 6 Glass measuring cylinder-BOROSIL

Not specified Not Required – Not Required

100ml 1 Nos

250ml 1 Nos

500ml 1 Nos

1000ml 1 Nos

Glass beaker

Not specified 2 Nos – Not Required200ml

250ml –

Plastic measuring cylinder

Not specified Not Required Not Required

100ml 1 Nos –

200ml –

250ml 1 Nos –

500ml 2 Nos –

1000ml 1 Nos –

27 8 Enamel tray

Not specified Not Required Not Requireda)600x450x50mm 1 Nos –

b)450x300x40mm 1 Nos –

c)300x250x40mm 1 Nos –

28 Aluminium tray

Not specified Not Required Not Required600x600x50mm 1 Nos –

900x600x50mm 1 Nos –

300x250x40mm 1 Nos –

29 Hydrometer(sp gr)- range 1000 to 1200 Not specified 1 Nos Not Required – Not Required

Calibration done in Laboratory

of 15

Sl. NoTS


Remarks



CALIBRATION OF BULK DANSITY MEASURING CYLINDER

Lab. Calibration No : Date: 16/04/2008

Testing Location : Ch: 1030+700

A. Capacity of Measuring Cylinder : 3 ltr.

A(a) Cylinder Nos : 01

Sl. No Description Unit Trial-01 Trial-02 Trial-03 Remarks

1 Cylinder Weight Kg 2.728 2.729 2.729

2 Cylinder Weight+Water Kg 5.731 5.731 5.73

3 Weight of Water Kg 3.002 3.002 3.001

4 Mean Kg 3.002

A(b) Cylinder Nos : 02





4 Mean Kg 2.989

B. Capacity of Measuring Cylinder : 15 ltr.

B(a) Cylinder Nos : 01





4 Mean Kg 14.652

B(b) Cylinder Nos : 01





4 Mean Kg 14.696


I.D.=0.150 mtr. HT.=0.170 mtr.

I.D.=0.150 mtr. HT.=0.170 mtr.

I.D.=0.250 mtr. HT.=0.300 mtr.

I.D.=0.250 mtr. HT.=0.300 mtr.

SPOT CALIBRATION OF CUBE MOULD (SIZE-150x150x150)

Lab. Calibration No : Date: 16/04/2008Testing Location : Ch: 1030+700A . Quantity = 36 nos

Sl. No Description UnitDimension

RemarksL B H

1 Cube Mould MM 150 150 150

2 -do- MM 150 150 150

3 -do- MM 150 150 150

4 -do- MM 150 150 150

5 -do- MM 150 150 150

6 -do- MM 150 150 150

7 -do- MM 150 150 150

8 -do- MM 150 150 150

9 -do- MM 150 150 150

10 -do- MM 150 150 150

11 -do- MM 150 150 150

12 -do- MM 150 150 150

13 -do- MM 150 150 150

14 -do- MM 150 150 150

15 -do- MM 150 150 150

16 -do- MM 150 150 150

17 -do- MM 150 150 150

18 -do- MM 150 150 150

19 -do- MM 150 150 150

20 -do- MM 150 150 150

21 -do- MM 150 150 150

22 -do- MM 150 150 150

23 -do- MM 150 150 150

24 -do- MM 150 150 150

25 -do- MM 150 150 150

26 -do- MM 150 150 150

27 -do- MM 150 150 150

28 -do- MM 150 150 150

29 -do- MM 150 150 150

30 -do- MM 150 150 150

31 -do- MM 150 150 150

32 -do- MM 150 150 150

33 -do- MM 150 150 150

34 -do- MM 150 150 150

35 -do- MM 150 150 150

36 -do- MM 150 150 150


SPOT CALIBRATION OF CUBE MOULD

Lab. Calibration No : Date: 16/04/2008Testing Location : Ch: 1030+700

A . CUBE MOULD SIZE- 100x100x100Quantity = 6 nos


RemarksL B H


2 -do- MM 100 100 100

3 -do- MM 100 100 100

4 -do- MM 100 100 100

5 -do- MM 100 100 100

6 -do- MM 100 100 100

B CUBE MOULD SIZE- 70.6x70.6x70.6Quantity = 12 nos

Sl. No Description UnitDimension Remarks

L B H

1 Cube Mould MM 70.6 70.6 70.6

2 -do- MM 70.6 70.6 70.6

3 -do- MM 70.6 70.6 70.6

4 -do- MM 70.6 70.6 70.6

5 -do- MM 70.6 70.6 70.6

6 -do- MM 70.6 70.6 70.6

7 -do- MM 70.6 70.6 70.6

8 -do- MM 70.6 70.6 70.6

9 -do- MM 70.6 70.6 70.6

10 -do- MM 70.6 70.6 70.6

11 -do- MM 70.6 70.6 70.6

12 -do- MM 70.6 70.6 70.6


SPOT CALIBRATION OF CUBE MOULD


A . CUBE MOULD SIZE- 50x50x50

Quantity = 9 nos


RemarksL B H


2 -do- MM 50 50 50

3 -do- MM 50 50 50

4 -do- MM 50 50 50

5 -do- MM 50 50 50

6 -do- MM 50 50 50

7 -do- MM 50 50 50

8 -do- MM 50 50 50

9 -do- MM 50 50 50


SPOT CALIBRATION OF SIEVE


A SIEVE SIZE- 450 MM DIA COMPLETE WITH LID

Quantity = 1 set


RemarksL B H

1 Sieve Size 40 mm MM 40 40




5 Sieve Size 12.5 mm MM 12.5 12.5


7 Sieve Size 4.75 mm MM 4.75 4.75

8 Sieve Size 2.36 mm MM 2.36 2.36

B SIEVE SIZE- 250 MM DIA COMPLETE WITH LID

Quantity=1 set


RemarksL B H

1 Sieve Size 4.75 mm MM 4.75 4.75

2 Sieve Size 2.36 mm MM 2.36 2.36

3 Sieve Size 1.18 mm MM 1.18 1.18


5 Sieve Size 600 mic. MIC. 600 600

6 Sieve Size 300 mic MIC. 300 300

7 Sieve Size 150 mic MIC. 150 150


SPOT CALIBRATION OF TRAY (ENAMAL/ALUMINIUM)

Lab. Calibration No : Date: 16/04/2008Testing Location : Ch: 1030+700A . Quantity = 2 set


RemarksL B H

ENAMAL TRAY

1 a) 600x450x50 MM 600 450 50

2 b) 450x300x40 MM 450 300 40

3 c) 300x250x40 MM 300 250 40

ALLUMINIUM TRAY

1 a) 600x600x50 MM 600 600 50

2 b) 900x600x50 MM 900 600 50

3 c) 300x250x40 MM 300 250 40


SPOT INSPECTION REPORT

Lab. Calibration No:Location: 1030+700Quantity: 1DATE: 16-04-08

Name of equipment: ELECTRICALLY OPERATED OVEN

BRAND MODEL SL. NO REMARKS

HOT AIR OVEN AMBRO

CALIBRATION OF ELECTRICALLY OPERATED OVEN

REMARKS:

MACHINE WORKING IN GOOD CONDITION

100ºC 100ºC

110ºC 110ºC

150ºC 150ºC

200ºC 200ºC

CONTRACTOR'S REPRESENTATIVE CONSULTANT'S REPRESENTATIVE

TEMPERATURE OF OVEN

TEMPERATURE OF THERMOMETER

50ºC 50ºC


Lab. Calibration No:Location: 1030+700Quantity: 1Date: 16-04-08

Name of equipment: VICATS APPRATUS

SL. NO DESCRIPTION OF PARTS DIMENSION OF PARTS REMARKS:

1 MOULD 80 MM DIA 40 MM HEIGHT

DIMENSIONS ARE AS PER IS2 PLUNGER 10 MM DIA 50 MM HEIGHT

3 NEEDLE


1 MM²



Name of equipment: MORTAR CUBE VIBRATOR FOR CEMENT TESTING

BRAND MODEL SL. NO REMARKS

PRITEC AC INDUCTION MOTOR S-2007


MACHINE WORKING IN GOOD CONDITION



Name of equipment: SLUMP CONE

SL. NO DESCRIPTION OF PARTS DIMENSION OF PARTS (MM) REMARKS

1 TOP DIA 100

2 BOTTOM DIA 200

3 HEIGHT 300

4 SLUMP ROD 610 16 MM DIA


DIMENSIONS ARE AS PER IS



Name of equipment: AGGREGRATE IMPACT VALUE TESTING MACHINE

SL. NO DESCRIPTION OF PARTS A/U DIMENSION OF PARTS REMARKS

1 TOTAL WEIGHT KG 60

2 WEIGHT OF HAMMER KG 14

3 HEIGHT OF FALL CM 38





Name of equipment: LE-CHATELIER APPRATUS

SL. NO DESCRIPTION OF PARTS A/U DIMENSION OF PARTS REMARKS

1 HEIGHT OF MOULD MM 30


2 DIA OF MOULD MM 30

3 THICKMESS OF MOULD MM 0.5

4 MM 165


CENTRE OF MOULD TO END OF POINTOR