ZD Company Presentation
-
Upload
cheng-xinxian -
Category
Documents
-
view
224 -
download
0
Transcript of ZD Company Presentation
-
7/30/2019 ZD Company Presentation
1/38
To Make Consumer Satisfied is Our Eternal Subject
Zhengzhou City Zhengdie Valve Co., Ltd
Presentation
-
7/30/2019 ZD Company Presentation
2/38
Brief Introduction
Workshop Overview
Technology & Products
Quality Control
Sales & Service
-
7/30/2019 ZD Company Presentation
3/38
Brief Introduction
-
7/30/2019 ZD Company Presentation
4/38
NASDAQ : CVVT
-
7/30/2019 ZD Company Presentation
5/38
Founded in 1993 480 Employees Area 46,800
ZD Valve Factory
-
7/30/2019 ZD Company Presentation
6/38
Workshop Overview
-
7/30/2019 ZD Company Presentation
7/38
Machining Workshop
Annual Production Capacity: 16,000T
-
7/30/2019 ZD Company Presentation
8/38
5m & 6.2m Numerical Control Lathe
3.4m Numerical Control Lathe
Imported From France
Machining
-
7/30/2019 ZD Company Presentation
9/38
Machining
3.5m Double Arms Vertical Lathe
Z80 Drill Machine
Boring Machine
-
7/30/2019 ZD Company Presentation
10/38
Assemble Workshop
Area:6050m
-
7/30/2019 ZD Company Presentation
11/38
-
7/30/2019 ZD Company Presentation
12/38
Casting & heat treatment
-
7/30/2019 ZD Company Presentation
13/38
Technology & Products
-
7/30/2019 ZD Company Presentation
14/38
Rubber-lined
Butterfly Valve
Triple OffsetButterfly Valve
DN3600 Bi-Directional Rubber
Seated Butterfly Valve
(ductile iron)
Hydraulic Control
Butterfly
CheckValve
Bi-Directional
Rubber Seated
Butterfly Valve
Tilting Disc
Check Valve
EccentricPlug Valve
Resilient Seated
Gate Valve
-
7/30/2019 ZD Company Presentation
15/38
DN3600 Bi-Directional Rubber Seated Butterfly Valve(Body & Disc : one piece casting ductile iron) ,
Used for Guangzhou West River Diversion Project
Quality establishes future
-
7/30/2019 ZD Company Presentation
16/38
DN1004000mm PN640 Suitable temperature: -10120 Body & DiscDI, CS, SS, Al bronze etc. Shaft: SS420, SS431, 17-4PH etc.
Disc seat synthetic rubberEPDM/NBR/VITON/Silicon rubber,
PTFE, RPTFE etc.
Body seal ring : SS304, SS316, Al-bronze etc.
Bi-directional Rubber Seated
Butterfly Valve
Quality establishes future
-
7/30/2019 ZD Company Presentation
17/38
Rubber-lined Butterfly Valve DN1004000mm PN640 Suitable temperature: -1080
Body & Disc: DI, CS etc. Shaft: Duplex SS, Super austenitic SS, Monel etc.
Seat: EPDM/NBR
Lining inside surface:
- Ebonite lining, EPDM lining,
- PO(Propylene Oxide)lining,
- Copper alloy lining, Nickel alloy lining,
- Duplex SS lining, SS lining etc.
Quality establishes future
-
7/30/2019 ZD Company Presentation
18/38
-
7/30/2019 ZD Company Presentation
19/38
Triple Offset Metal SeatedButterfly Valve
DN2002000mm
PN10150Class 150~900lb Suitable temperature :-20425 Body & Disc: CS, SS, AS etc.
Shaft: SS, AS etc.
Body Seal: Hard alloy deposited
Disc seal: Laminated metal seal, or
solid metal seal etc.
.
Quality establishes future
-
7/30/2019 ZD Company Presentation
20/38
Quality establishes future
Eccentric Plug Valve
DN1001600mm
PN1040 Suitable temperature :-29425 Body & Disc: CS, SS
Seal: hard alloy
Shaft: SS420 etc.
-
7/30/2019 ZD Company Presentation
21/38
Eccentric Plug Valves(DN100-DN200) with High abrasion resistant
sealing face, Used for Blast Furnace Gas(dry ash)Filter Bag Dust
Removing System of Wuhan Steel Company.
Service medium: Dry Ash (grain
diameter 0-1mm)
Service temperature : 180 ~ 280 Flow speed: 25m/s
Quality establishes future
If with the Ordinary hardness sealing face, thevalves need to be replaced at least every month.
For these valves with new sealing face material,
by now, they have been in service almost two
years, and in good operation now.
The Main Working Data as below:
-
7/30/2019 ZD Company Presentation
22/38
Quality establishes future
Resilient Seated Gate Valve
DN50600mm PN1016 Suitable temperature :-1080 Body & bonnet: DI
Disc: DI + EPDM or NBR
Stem: St.St.
-
7/30/2019 ZD Company Presentation
23/38
DN4005500mm PN640 Suitable temperature: -20425
Hydraulic Control ButterflyCheck Valve
Body: DI, CS, SS, Bronze etc.
Disc: DI, CS, SS, Bronze etc.
Shaft: SS, Duplex SS, Monel etc.
Seat: synthetic rubber, SS, hard alloy
Quality establishes future
-
7/30/2019 ZD Company Presentation
24/38
R&D Center
Strong technical team
Quality establishes future
-
7/30/2019 ZD Company Presentation
25/38
Quality Control
-
7/30/2019 ZD Company Presentation
26/38
Quality Certificates
ISO 9001
CE
API 6D
WRAS
TS
ISO 14001
GOST
ISO 18001
-
7/30/2019 ZD Company Presentation
27/38
Inspection & Test
Chemical composition & Metallographic Test
Impact Test Tensile Strength Test
-
7/30/2019 ZD Company Presentation
28/38
Inspection & Test
PMI
Non-Destructive Test (UT)
Carbon-Sulfur Analysis
Hydro-static Test
-
7/30/2019 ZD Company Presentation
29/38
Sales & Service
-
7/30/2019 ZD Company Presentation
30/38
Sales of Recent 4 Years
Unit: Thousand US$
2009 2010 2011 2012
Sales
$29,000
$42,000
$52,000
$62,000
-
7/30/2019 ZD Company Presentation
31/38
Oversea Market
Oversea SaleEurope
Asia
Middle East
Africa
Austrilia and
AmericaOversea Market:
Germany America Italy France Iran Norway Sudan Czech Korea Malaysia Singapore Algeria
-
7/30/2019 ZD Company Presentation
32/38
Some Installation Site in Water
Company
A Pump Station Installation Site in
Kuwait
Dalian Water Group Installation Site
-
7/30/2019 ZD Company Presentation
33/38
Some Installation Site in Steel IndustryShanghai Baosteel Group Corporation Anyang Iron & Steel Group Co., Ltd
-
7/30/2019 ZD Company Presentation
34/38
DN 3600 Valve Installation Site in West River
Diversion Project
-
7/30/2019 ZD Company Presentation
35/38
Some Installation Site in
Power PlantPhilippine AES Power Plant
-
7/30/2019 ZD Company Presentation
36/38
Installation Site in
Petrochemical Plant
-
7/30/2019 ZD Company Presentation
37/38
Water supply
Power plant
Petrochemical
Metallurgy
Sewage treatment etc.
Sea water desalination
Service Industry
-
7/30/2019 ZD Company Presentation
38/38
Thanks for your time
ZD valve