Nothing else is even close

Zamboni Electric Edger EZ IIIThe Power to Perform

This brochure is a PDF internet version posted on our website for reference only. The Zamboni Company assumes no responsibility for its content or use. For product and sales information, please contact the Zamboni Company.

• 36 volt, 100 amp continuous electrical system.

• The 6.5HP (4.8kW) electrical motor at 36 volts is significantly more powerful than competitive edgers.

• Wide 14-inch (356 mm) cut includes eight-sided cutters that last longer and reduce replacement time and cost.

• Contoured snow chute directs snow toward center of ice, away from the boards and operator. Replaceable board guide is standard.

• Heavy duty steel plate body and runners provide stable wander-free control. Baked-on powder paint and zinc electroplating is used throughout for corrosion protection.

• Rubber wheels raise the machine up for transport away from the ice.

• Depth control is infinitely variable and not limited to factory presets. Controls are conveniently located on the handle near the operator.

• 12 volt absorbed glass mat batteries approved for air, ground, or water transport.

• Weight: 250 pounds (113kg) including batteries.

Zamboni USAFrank J. Zamboni & Co., Inc.15714 Colorado Ave., Paramount, CA USA 90723-4211Phone (562) 633-0751 Fax (562) 633-9365

Zamboni Canada / EuropeZamboni Company Ltd.38 Morton Ave. East, Box 1388, Brantford, ON Canada N3T 5T6 Phone (519) 758-5000 Fax (519) 758-0500

www.zamboni.com

Get an edge with these features:

This brochure has been prepared only as a general guide for the customer. Every effort has been made to assure that the information is correct at the time of its printing. Some features described or shown may be optional at extra cost and prices, colors, materials, specifications and models are subject to change. Some options are required in combination with other options. ZAMBONI and the configuration of the Zamboni® ice resurfacing machine are registered trademarks of Frank J. Zamboni & Co., Inc. ©Zamboni 2014.

This brochure is a PDF internet version posted on our website for reference only. The Zamboni Company assumes no responsibility for its content or use. For product and sales information, please contact the Zamboni Company.

Wide 14-inch (356 mm) cut includes eight-sided cutters

Powered by three 12 Vbatteries for zero emissionsand quiet operation.

The fully automated battery charger supplied with the edger can be conveniently wall mounted or alternately hung from the fine adjustment handle.