YLPP-25-1-50-R - IPG Photonics
Transcript of YLPP-25-1-50-R - IPG Photonics
YLPP-25-1-50-R ultrashort pulse fiber lasers provides pulses with 25 μJ pulse energy with scalable average output power of 50 W and selectable pulse durations in the range of 1 to 5 ps at full operational repetition rate range of 50-5500 kHz. IPG monolithic all-spliced-fiber design is “beyond state-of-the-art”, enabling an incredibly compact laser that is inherently more power efficient, reliable and robust than conventional bulk-rod or disk based DPSS USP lasers yet priced significantly lower than legacy products. The novel design architecture and flexible control electronics provide conveniently short warm-up times and allow adjustment of both pulse energy and repetition rate without affecting the output beam parameters.
Models can be designed within specified maximum power, maximum pulse energy and pulse durations in 1 to 5 ps range. Burst mode option, shorter pulsed durations and higher pulse energies are available upon request.
FEATURES �Wavelength 1030 nm
�Average Power 50 W
�Pulse Duration Options 1-5 ps
�Pulse Energy 25 μJ
�Repetition Rate 50 kHz to 5.5 MHz
�Ultra-Compact and Light Laser Head
�Burst Mode Option
�Warm Start in Seconds
�Cold Start in Seconds
� Integrated Delivery Fiber to Remote Head
� Integrated Scanner Option
APPLICATIONS �Precision Micromachining
�Sapphire LED Wafer Scribing
�Black Marking of Stainless Steel or Aluminum
�Thin Film Ablation for Solar/PV/Flat Panel Display
�Surface Microstructuring & Texturing
�Cutting and Drilling Glass/Sapphire
�Multilayer Polymer Film Cutting
�Precise Marking of Metals/Polymers/Glass
�Battery and Thin Metal Foil Cutting
�Micromachining of Ceramics
YLPP-1-5 ps, 10-50 WAll-Fiber Picosecond Pulsed Laser
0
5
10
15
20
25
30
50 100 200 500 1000 1200 1500 2000
Ener
gy /
Pul
se m
J
Repetition Rate, kHz
Pulse Energy as a Function of Rep Rate
μJ
50 W Average Power1 - 5 picoseconds
YLPP-1-5 ps, 10-50 WAll-Fiber Picosecond Pulsed Laser
Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained herein shall legally bind IPG only if it is specifically incorporated into the terms and conditions of a sales agreement. Some specific combinations of options may not be available. The user assumes all risks and liability whatsoever in connection with use of a product or its application. IPG, IPG Photonics, The Power to Transform and IPG Photonics’ logo are trademarks of IPG Photonics Corporation. © 2022 IPG Photonics Corporation. All rights reserved.
MAX. AVERAGE OUTPUT POWER: 100 WMAX. PEAK OUTPUT POWER: 50 MW
PULSE DURATION: 1-5 psPULSE REPETITION RATE: 50-2,000 kHz
WAVELENGTH RANGE: 900-1200 nm
DANGER - INVISIBLE LASERRADIATION AVOID EYE OR SKIN
EXPOSURE TO DIRECT ORSCATTERED RADIATION
CLASS 4 LASER PRODUCT
IEC 60825-1:2014
5.2 R13 1/22
General Characteristics YLPP-25-1-50-R
Control Unit Dimensions, mm 448 × 580 × 132
Optical Head Dimensions, mm 65 × 370 × 70
Cooling Water
Supply Voltage, Single-phase 50-60 Hz, VAC 100-240
Power Consumption, W <300
Optical Characteristics YLPP-25-1-50-R
Wavelength, nm 1030
Mode of Operation Pulsed
Average Power, W 50
Pulse Energy, µJ 25
Pulse Duration, ps 1-5
Repetition Rate, kHz 50-5500
Beam Quality, M2 <1.4 (1.2 Typ.)
+1 (508) 373-1100; IPGPhotonics.com/contact www.ipgphotonics.com