ISUZU 2012 D-MAXTJM T13 OUTBACK BULL BARThe TJM T13 Outback bull bar is available now for your Isuzu D-Max. TJM bull bars are put through a comprehensive design criteria and testing process. This ensures that all TJM bull bars are air bag compatible and ADR compliant.

Features › Designed for improved approach angle › Lower wing and centre guards › Full cato straps, uniquely styled to the vehicle for incredible strength anddamage deflection

› 51mmø tubes › Integrated fog lights (fog lights, wiring harness & switches included) › Flush mounted L.E.D. indicator/park lenses › Re-inforced recovery jack points (suits the TJM recovery jack) › Low profile winch mount (TJM recommends fitment up to TJM 9,500lb cable and plasma winches)

› Accommodates large driving lights (up to Britax Xray Vision 220 series) › Provision for fitment of dual aerials on outer loops › Airbag compatible and ADR compliant › Does not void your new vehicle warranty

DESCRIPTION: TJM T13 OUTBACK, ISUZU 2012 D-MAXPART NUMBER: 070SB13N34EFITTING TIME: APPROXIMATELY 3.5HRS

Note: This is pre-release product, photos are for illustration purposes only. TJM Products Pty Ltd has made every effort for the information contained within this release to be correct at time of release. However TJM Products Pty Ltd reserve the right to alter any specifications upon final release.

11409|230513

For your nearest retailer contact07 3865 9999 | www.tjm.com.au /TJM4x4

ISUZU 2012 D-MAXTJM AIR BAG COMPATIBLEMODULAR SIDE BAR & STEPSTJM is proud to announce its new air bag compatible (ABC) side step mounts are available for your Isuzu 2012 D-Max. An extensive engineering development and testing program was undertaken to ensure optimal performance for off road driving and user operation while still providing maximum vehicle safety compliance. In the event of a side impact accident the unique design of the TJM ABC side step mounts provide a crumple zone that keeps the vehicle from deploying air bags unnecessarily. Unnecessary deployment of air bags can cause injury and significant repair costs for the end user. TJM ensures the safety of the end user by engineering all accessories in compliance with vehicle OE safety systems.

TJM modular side bars & steps offer excellent wheel arch, flare, sill and panel protection but the unique feature of these modular side bars and steps is if you choose, you can install just the side steps and then fit the side bar kit at a later date. This unique design is only available through TJM.

Features

› Large 50mmØ tubing

› Engineered air bag compatible heavy duty mounting system

› Provides unrivalled wheel arch, flare, sill & panel protection

› Durable, light weight checker plate steps provide easy access to and from the cab, as well as added side protection

› Air bag compatible and does not void your new vehicle warranty

DESCRIPTION: TJM ABC MODULAR SIDE STEPS, ISUZU 2012 D-MAXPART NUMBER: 735SBSSA32PFITTING TIME: APPROXIMATELY 2HRS

DESCRIPTION: TJM ABC MODULAR SIDE BAR KIT, ISUZU 2012 D-MAXPART NUMBER: 780SBKIT34EFITTING TIME: APPROXIMATELY 1HR

For your nearest retailer contact07 3865 9999 | www.tjm.com.au /TJM4x4

11410|080513

ISUZU D-MAXTJM T15 ALLOY DELUXE BULL BARThe T15 alloy deluxe bull bar shape is signified by a strong centre loop, accompanied by two refined side loops protecting the headlights. This bar is light weight, strong and looks the part too. Adding guaranteed class to your four wheel drive, the T15 alloy deluxe is sure to make others green with envy.

Features › Designed for improved approach angles

› Lower wing and centre guards

› 76mmØ centre tube 50mmØ outer tubes

› Integrated fog lights (fog lights, wiring harness & switches included)

› Flush mounted L.E.D. polycarbonate indicator/park lenses

› Low profile winch mount (TJM recommends fitment up to TJM 9,500lb cable and plasma winches)

› Accommodates large driving lights (Up to Britax Xray Vision 220 series)

› Provision for fitment of dual aerials

› Air bag compatible and ADR compliant

› Does not void your new vehicle warranty

DESCRIPTION: TJM T15 ALLOY DELUXE BULL BAR, ISUZU D-MAXPART NUMBER: 070AP15N34EFITTING TIME: APPROXIMATELY 4 HRS

For your nearest retailer contact07 3865 9999 | www.tjm.com.au

11429|230913

/TJM4x4

TJM RB6 rear bar shown with TJM recovery hitch, TJM recovery hitch available separately.

ISUZU 2012 DMAXTJM RB6 REAR BARIt’s when approaching and departing rises in the terrain that the rear of your vehicle is susceptible to heavy bumps and damage. To offer the best possible protection to counter this, TJM’s RB6 rear step bar is manufactured from strong steel tube and chassis mounted for strength, providing your vehicle’s rear panels withsolid protection.

Features › 63.5mmØ steel pipework offers excellent rear protection

› Durable and light weight alloy checker plate step provides easy access to the rear ofthe vehicle

› Reinforced T-slot recovery jack points (Suits the TJM recovery jack)

› Provision for parking sensors

› Trailer socket mount

› ADR62 certified, class 4 heavy duty towbar

› Does not void your new vehicle warranty

› Maximum towbar capacity 3000kg - maximum towball down load 300kg

Trailer plugs and tow ball are not included

DESCRIPTION: TJM RB6 REAR BAR, ISUZU 2012 DMAXPART NUMBER: 081SB27232PFITTING TIME: APPROXIMATELY 30 MINS

11422|160813

For your nearest retailer contact07 3865 9999 | www.tjm.com.au /TJM4x4

ISUZU DMAX 2012+TJM UNDERBODY GUARDSTo protect the most vulnerable components underneath the vehicle TJM underbody guards are constructed from 3mm thick steel sheet and incorporates strategic folds for incredible strength. They are electro coated black for corrosion resistance of up to 500 hours. The advantages of electro coating is that it gets into all the nooks and crannies and is much more resilient to chipping when knocked around, unlike powder-coated varieties.

Features › 3mm thick steel

› Provides excellent underbody protection

› Electro coated black for up to 500 hours of corrosion resistance

› Press folded in strategic areas for absolute maximum strength

› Drain access holes where necessary

DESCRIPTION: TJM FRONT UNDERBODY GUARD (F.U.G.), ISUZU DMAX 2012+PART NUMBER: 077SBFUG32PFITTING TIME: APPROXIMATELY 30 MINS

DESCRIPTION: TJM SUMP GUARD, ISUZU DMAX 2012+PART NUMBER: 077SBSUM32PFITTING TIME: APPROXIMATELY 30 MINS

DESCRIPTION: TJM TRANSMISSION GUARD, ISUZU DMAX 2012+PART NUMBER: 077SBTRA32PFITTING TIME: APPROXIMATELY 30 MINS

11463|130214

For your nearest retailer contact07 3865 9999 | www.tjm.com.au /TJM4x4

SCAN THIS CODE WITH

YOUR SMART DEVICE TO

VIEW ONLINE

F.U.G. (077SBFUG32P), SUMP (077SBSUM32P) & TRANSMISSION (077SBTRA32P) GUARDS SHOWN

F.U.G. (077SBFUG32P)

SUMP GUARD (077SBSUM32P)