Www.turkuai.fi Electronic Workshop Team The demo consists of Abloy door automatics and Deltabit...
-
Upload
chase-chopin -
Category
Documents
-
view
215 -
download
1
Transcript of Www.turkuai.fi Electronic Workshop Team The demo consists of Abloy door automatics and Deltabit...
www.turkuai.fi
Electronic Workshop Team
The demo consists of Abloy door automatics and Deltabit fingerprint recognition electronics. The competition task
will be performed as pair work.
The task begins with the assembly of the Abloy door and repairing of the fault in its electronic unit. The following
parts of the task are the CAD-design, assembly and, finally, programming of a driving unit for Deltabit finger
print recognition electronics.
www.turkuai.fi
Electronic Workshop TeamAssembly and Testing of Abloy Door Automatics
The competitors will be told about the assembly task, but there can also be other problems in the apparatus. The competing pair will
get the material and documents of the apparatus. They will have 15 minutes to acquaint themselves with the data. After that they can
ask about the problems.
www.turkuai.fi
Electronic Workshop TeamDesign of PCB card on CAD
The competing pair will get a circuit diagram and a simulated model of the object to be designed. They will have 10 minutes time to acquaint themselves with the material. After
that they can discuss with the experts and, possibly, get additional information. Competitors use Eagle CAD (freeware version) which can be found from this link
http://www.cadsoftusa.com/.
www.turkuai.fi
Electronic Workshop TeamMOUNTING AND TESTING OF A CIRCUIT BOARD
Mount the circuit board that you made! The quality of your work as well as your working methods will all be assessed, so be careful when soldering, extra tin splashes, corrected tin
bridges and the rest of it all will be examined. You can only complete a mounting procedure of components in one way: by doing it well! Pay attention even to the smallest
details.
Deltabit fingerprint recognition electronics
www.turkuai.fi
Electronic Workshop TeamStructure and editing of the program
In writing a program a competitor has to follow a editing pattern that corresponds to the original program. If he/she changes or adds a code it has to be well commented on. The
constants of the program have to be named and defined according to European standards of definition that describes them. In the program code he/she has to use
conditional and repetitive structures in an appropriate way./**************************************************************************Euroskills 2007Embedded programmingName: (Write your name here)**************************************************************************/#include "Mega48.h"#include "Deltabit.h"#define TIME_3S 6 // 3 seconds time constant
// Return values of Fingerprint library functions#define T_OK 0 // - no error#define T_ERROR 1 // - error detectedunsigned char RelayCounter; // Relay on timer as 0,5 s pulsesunsigned char LedCounter; // Led timer as 0,5 s pulsesvoid ReadKey()
www.turkuai.fi
Electronic Workshop TeamFinal Programming
The competing pair will have to program the equipment so that the finger data given by the finger print detector will open the door. The pair will demonstrate the operation to the judge.
Implementation of the program
Fingerprint registration 0 … 9 Before an identification of a fingerprint can take place, the finger must be registered.There are ten possible memory locations available. A registration is started by using
number switch 0-9. The number sets the memory location at the same time.Make sure that the fingerprint reader is in a stand-by position (only the red led is on)
www.turkuai.fi
Electronic Workshop TeamTimetable for Demo
9.00 Assembly and Testing of Abloy Door Automatics 11.30 Demonstration and Test of Door
12.00-12.45 Lunch12.45Design of PCB card on CAD
14.30 Assembly and Programming of PCB Card16.30 Demonstration and Test
17.00 End