WT Henley 54182-19, SP&N, 100Amp House Service Cut-out
2
Underground Distribution Fuse Service Equipment Series 5 House Service Cutouts 240/415V The Series 5 range has been designed as a replacement for existing PILC installations. Interchangeable phase and neutral/earth terminals enable simple installation, without the need to disturb cable polarity. They are equally suited both to paper and polymeric insulated cables. Sharply serrated bores give complete contact stability with all conductors, copper or aluminium, stranded or solid. The generously sized sealing chamber makes jointing easier and obviates the need for tight cable bends. Silver-plated fuse clip contacts wipe silver on first carrier insertion, ensuring reliable ling term service. The range is available in a choice of ratings 60/80A or 100A. Outgoing cable entries are provided with an auxiliary moulded seal, to accept the sheath as well as the insulation of the cables and are tapered to provide a close fit on the sheathing. Four incoming cable entries (two at the base and one at each side) are supplied with blanking plugs and two stepped rubber grommets for maximum versatility. Arrangement suits any direction of the existing cable. • Manufactured from glass reinforced polyester. • Precise contact pips on fuse-clips together with tightly tolerance phosphor-bronze pressurising springs give consistently low contact resistance – every time. • Fuse and neutral compartments are interchangeable so that fuse can be orientated on the left or the right side. • Integral design. WT Henley Church Manorway, Belvedere, Erith, Kent DA8 1EX ENGLAND A Division of Sicame UK Limited Telephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: [email protected] Website: www.sicameuk.co.uk Registered office: Church Manorway, Erith, Kent DA8 1EX United Kingdom - Registration No 3319466 VAT Registration No GB 683822508
-
Upload
thorne-derrick -
Category
Technology
-
view
34 -
download
1
Transcript of WT Henley 54182-19, SP&N, 100Amp House Service Cut-out
UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn
Fuse Service Equipment
Series 5 House Service Cutouts 240/415V
The Series 5 range has been designed as a replacementfor existing PILC installations. Interchangeable phase andneutral/earth terminals enable simple installation, withoutthe need to disturb cable polarity. They are equally suitedboth to paper and polymeric insulated cables.
Sharply serrated bores give completecontact stability with all conductors,copper or aluminium, stranded or solid.
The generously sized sealing chambermakes jointing easier and obviates theneed for tight cable bends.
Silver-plated fuse clip contacts wipe silveron first carrier insertion, ensuring reliableling term service.
The range is available in a choice of ratings60/80A or 100A.
Outgoing cable entries are provided withan auxiliary moulded seal, to accept thesheath as well as the insulation of thecables and are tapered to provide a closefit on the sheathing.
Four incoming cable entries (two at thebase and one at each side) are suppliedwith blanking plugs and two steppedrubber grommets for maximum versatility.Arrangement suits any direction of theexisting cable.
• Manufactured from glassreinforced polyester.
• Precise contact pips on fuse-clipstogether with tightly tolerancephosphor-bronze pressurisingsprings give consistently lowcontact resistance – every time.
• Fuse and neutral compartmentsare interchangeable so that fusecan be orientated on the left or theright side.
• Integral design.
WT Henley Church Manorway, Belvedere, Erith, Kent DA8 1EX ENGLANDA Division of Sicame UK LimitedTelephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: [email protected] - Website: www.sicameuk.co.uk
Registered office: Church Manorway, Erith, Kent DA8 1EX United Kingdom - Registration No 3319466 VAT Registration No GB 683822508
14688 Series 5 House Service Cutouts:Layout 1 7/2/14 09:21 Page 1
Jack Nottidge
T&D
Jack Nottidge
T&D
UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn
Fuse Service Equipment
Description Product Code
60/80A 100A
Single Pole and Neutral Cutout* 54181-91 54182-19
Tripe Pole and Neutral Cutout* 54184-01 54182-63
Accessories Product Code
60/80A Carrier 54365-16
100A Carrier 54365-98
Fuselink to suit 60/80A Carrier. BS HD 60259-3 2010
16 x 22 x 57mm 16 x 30 x 57mm
30A 58332-04 30A 58332-06
60A 58333-07 60A 58333-11
80A 58334-08 80A 58334-04
100A 58334-09 100A 58334-06
Overall Dimensions (mm)
Model Length Width Depth
SP/N 192 121 98
TP/N 230 217 98
16
57
22
16
57
30
All dimensions in mm
Fuselink to BS HD 60259-3 2010’ for use with60A/80A carrier
Fuselink Options
Fuselink to BS HD 60259-3 2010’ for use with100A carrier
General Note: The equipment in this publication should be installed by a suitably qualified person. Sicame UK Limited reserves theright to make changes in product specification without notice or liability. All information is subject to Sicame UK’s own data and isconsidered accurate at time this document was created.
© 2014 Sicame UK Limited. All rights reserved. No part of this document may be copied or reproduced in whole or in part without prior writtenapproval of Sicame UK Limited.
14688 2014-02-01
14688 Series 5 House Service Cutouts:Layout 1 7/2/14 09:21 Page 2
Jack Nottidge
T&D
