World Marine of Mississippi, LLC€¢ Primarily use ShipConstructor® for 3D modeling and production...
Transcript of World Marine of Mississippi, LLC€¢ Primarily use ShipConstructor® for 3D modeling and production...
Location
The Pascagoula East Yard is a 94 acre full service facility. It is purpose-built for heavy marine fabrication and rig upgrades, repairs and conversions. Facilities include an automated surface preparation wheelabrator, N/C cutting machines, automated panel line, a large machine shop and a fully-equipped pipe shop. The covered fabrication shop area encompasses 100,000 sq. ft. with an additional 360,000 sq. ft. heavy build area outside. The East Yard’s wide array of craneage includes one 125t and one 150t rail-mounted gantry cranes, two each 150t barge-mounted ringer cranes, a 20t and a 40t platen bridge cranes. The deep quayside is 2,000 LF with a 500 ft. X 300 ft. X 60 ft. deep hole beside. The Dual Carrier floating dry dock has a 20,000 MT capacity. The World Marine West Yard is a 13 acre facility offering 1100 LF of deep quayside. Facilities include a crawler crane, shops, warehousing and offices to support rig repair and conversion projects.
World Marine of Mississippi is your best choice for rig repair and topsides fabrication in the Gulf.
Safety is #1 Priority
Safety
Safety is #1 Priority
Safety Mission Statement
World Marine of Mississippi, LLC believes that all accidents are preventable and strives to maintain an accident free workplace for everyone involved in World Marine operations. Safety achievement begins with a comprehensive health and safety management system, which is an integral part of all World Marine sites. The system includes a combination of individual accountability, performance recognition, system enhancements, and contractor safety measures.
Safety is #1 Priority
QA/QC World Marine of Mississippi, LLC is committed to providing superior products and services, meeting all Customer and Regulatory requirements. Superior products and services are ensured through the application of a Quality Management System that is ISO 9001:2008 registered. Customer satisfaction is the key element of this system, and each employee is responsible for understanding and fulfilling these requirements.
Range of Services
Conversions and Upgrades • Bare-decks to drilling rigs • Drilling rigs to accommodations units • Drilling rigs to production platforms • Rig upgrade enhancements • Thruster Work
Rig Repair • Steel, piping, equipment, electrical, joiner additions & renewals • Blasting and painting • Refurbishments • Emergency repairs
Offshore Services • Structural, mechanical, electrical, joiner, blasting & painting services • Installation of heavy weldments • Leg-ups, quarters mods, and platform installations • Resumes of key offshore crewmembers available • 3D laser scanning services
Core Competencies • Relentless enforcement of our safety
culture • Strong project management policy • Letters of commendation from loyal customers • Strict budget & schedule adherence • Primavera – project scheduling Technical Services • Structural, mechanical & electrical detail design • 3D modeling and 3D laser scanning services • Field engineering and dimensional control
New Construction Capabilities
• OSV’s, LNG and Power barges, tugs, specialty vessels, ATB’s • Launch ways, panel lines, covered build areas with overhead cranes • Manufacturing processes with Primavera driven work packages • Modular construction with a high degree of pre-outfitting • Panels, sub-assemblies, assemblies, units, modules, vessel • Can support series production or one-off’s • Launch directly from rail way to dry-dock • Diesel – electric, diesel direct drive • Dimensional accuracy control • Primarily use ShipConstructor® for 3D modeling and production drawings
RYERSON PLATES & SHAPES
SUB UNIT ASSEMBLY
UNIT ASSEMBLY
PANEL FABRICATION
BARGE LOAD OUT
Laser Scanning
Laser Scanning Benefits
World Marine is equipped with state-of-the-art laser scanning equipment and experienced technicians. Survey information is collected faster, more accurately and safer vs. conventional
survey methods Survey data is stored in a database for future use
Scans from multiple vantage points Creates highly detailed 3-D surveys Orthographic Images Captures existing pipe, structure and geometric shapes Instant point and click measurements
Accuracy retained when exported into 3D Modeling Programs Accuracy: +/- 2mm at 25m Range: 0.6m – 76m Data collection rate: 120,000 points/second Up to 700 million points/scan
Multiple scans are combined to create a 3-D Point Cloud Model Completed survey: 8 hours
Generated from Model Accurate bill of material General and piping arrangements Equipment details and pipe spool drawings Virtual walkthroughs
Deep Draft Rig Solutions (DDRS) A GOM Deepwater Site for Thruster Removal and Installation
Location: Viosca Knoll 248 Width Restrictions: None Distance from World Marine East Facility: 38 miles Water Depth: 120’ (36.6m) – minimal slope Sea Conditions: Minimal Current & Wave Impact No Loop Currents
DDRS Advantages
• Deep Draft Rig mooring location near full-service yards • A benign sea-state, deep-hole, nearby site for thruster change out • Turnkey full service solution with a single prime contractor • Thruster work done by specialized team with 14+ years of thruster install/pull experience • Extensive experience working with thruster OEM technical representatives • World Marine recommends, customer reviews/chooses subs; one-stop-shop accountability • Fully integrated master execution plan updated in real-time • Well equipped onshore facility with dedicated shops for thruster work, space for storage of OFE • Easy access and minimal transit for crew change-out • Onshore housing available at our shipyard location • Work barges and mobile cranes at the offshore worksite • Utilize World Marine facilities in Pascagoula, MS or Mobile, AL for support
Yard Equipment Cranes •Overhead shop bridge cranes from 5 tons to 40 tons
capacity • (1) 125 ton and (1) 150 ton rail mounted gantry cranes • 20 ton and 40 ton platen bridge cranes •Two 150 ton barge mounted 4100 ringers •Two crawlers - 200 ton and 300 ton Shops and Equipment •Full service machine shop •ŸTandem 40 ft., 750 ton press brake •Full service pipe shop •2” plate roll •Automated wheelabrator with 12 ft. roller bed •CNC shape cutting robot •Automated panel line with 300 ft. conveyor system •CNC plasma/oxy cutting plate •50’ x 100’ x 25’ high indoor blast/paint facility burning
tables Dry Dock •20,000 MT Dual Carrier 364’ x 203’ floating dry dock
Yard Equipment
20,000 Ton Dual Carrier Floating Dry Dock
Profile Cutter/West Bay
Tandem 40’ 750 Ton Press Brake
Automated Panel Line
Joe Roche Vice President of Sales & Marketing
+1.281.899.2121 direct +1.713.557.4397 cell
Rob Busby Vice President of Business Development
+1.281.899.2122 direct +1.713.557.4517 cell
Michael Knight Sales Representative +1.281.415.0174 cell
www.worldmarine.com
SHIPBUILDER’S COUNCIL
OF AMERICA
TRC 00360