WOOD ROBOT TUTORIAL - Instructables
Transcript of WOOD ROBOT TUTORIAL - Instructables
![Page 1: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/1.jpg)
WOOD ROBOT
TUTORIAL
RAIVAN 1305003591
![Page 2: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/2.jpg)
MATERIAL 1. Pine wood [Thickness 2cm]
2. Pine wood [Thickness 5mm]
3. Mahogani [Thickness 2mm]
4. Dowel [Diameter 1cm]
5. Dowel [Diameter 7mm]
![Page 3: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/3.jpg)
TOOLS
1. Sawatau Screw Saw
2. PVAc Glue
3. Drill 8mm
4. Pencil dan ruler
5. Sandpaper rough and fine
6. Klem
![Page 4: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/4.jpg)
ROBOT SIZE
4 x 4 CM [2 pieces]
2 x 5 x 3 CM [2 pieces]
2 x 6 x 3 CM [2 pieces]
2 x 6 x 4 CM [2 pieces]
2.5 x 2 x 6 CM [2 pieces]
2 x 6.5 x 4 CM [2 pieces]
2 CM
1.5 CM
8 CM
3 CM
3 pieces
2 x 3 x 3 CM [2 pieces]
![Page 5: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/5.jpg)
DRAW ROBOT PATTERN ON THE PINE WOOD
![Page 6: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/6.jpg)
Nip the pine wood
that already have a pattern with table
klem.
Cut the wood with
saw.
![Page 7: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/7.jpg)
TA
Cut all the pattern on the pine wood for
hands and legs so it will become 4 pieces
for hands and 4 pieces for legs.
Hands Legs
![Page 8: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/8.jpg)
Use rough sandpaper to make the edges curved.
![Page 9: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/9.jpg)
Cut the side of the wood between arms dan
legs for joinery with screw saw.
5 ML
2 CM
![Page 10: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/10.jpg)
Joinery between upper hand and lower arms
and also between thigh and calf.
4 CM
3 CM
Hand
Leg
![Page 11: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/11.jpg)
Make 1 CM gap between
the upper hand and lower hand. Do the same with
the legs part
1 CM
Drill both part with 8mm
drill bit.
![Page 12: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/12.jpg)
Cut the dowel [2 CM] and put in through the holes.
Do the same things to the leg parts.
![Page 13: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/13.jpg)
Draw patterns for the hand parts [3 x 3 CM]
Cut and drill the hand parts and the wrist.
Put the dowel with diameter 7mm [1.5 CM] and join the hand and the wrist.
Cut the pine wood for the feet parts.
Make the holes on the feet and the leg parts.
Put the dowel with diameter 7mm [1.5CM] through the holes
Use rough sand paper to make the feet smoother.
![Page 14: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/14.jpg)
Cut the mahagoni wood for the body part into 3 pieces.
![Page 15: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/15.jpg)
Glue 3 pieces of the body with
PVAc gLue.
Hold the body with the
klem and leave it for a
day so the glue will stick
perfectly.
![Page 16: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/16.jpg)
Cut the head parts into 2
pieces and glue it with
PVAc glue
Hold the head part
with klem for a day
until the glue stick
perfectly.
![Page 17: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/17.jpg)
Make a 3 holes on the upper
side for the head and the left and the right side for hands by
using drill.
Drill the lowe body
part for the leg.
![Page 18: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/18.jpg)
Cut the 7mm dowel [5.5CM]
![Page 19: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/19.jpg)
Put the dowel 7mm through the hole between legs and
the body part.
![Page 20: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/20.jpg)
Make hole on the upper side hands and put the dowel
through the hands and the body’s part. The length of the
dowel is 1.5 CM.
![Page 21: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/21.jpg)
Drill the head part for
the dowel.
Put the dowel in the body
part and the head part.
The length of the dowel is
1.5cm
![Page 22: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/22.jpg)
Attach all the part until it become one and smooth
the surface with the fine sandpaper.
![Page 23: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/23.jpg)
Cut the two dowels (diameter : 1 cm, length 2-3 mm).
Use sandpaper for the upper side of the dowel to make
the expression for the robot (optional), you can also make eyebrow for your robot. You can make your own
ekspression.
![Page 24: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/24.jpg)
Attach both eyes and the eyebrow with PVAc glue however you want it.
![Page 25: WOOD ROBOT TUTORIAL - Instructables](https://reader031.fdocuments.net/reader031/viewer/2022012015/615a660471164328451a83bd/html5/thumbnails/25.jpg)
Have Fun With
Your Robot
RAIVAN 1305003591