Wood-firing at its simplest -...
Transcript of Wood-firing at its simplest -...
Wood-firing atits simplest
Wood heating
broad range
32
THE BENEFITS OF WOOD
• RENEWABLE ENERGY SOURCE
• ENVIRONMENTALLY FRIENDLY
• IT DOESN’T GET ANY CHEAPER
• LOWER ELECTRICITY CONSUMPTION
• WIDE CHOICE OF SUPPLIERS
• FREE IF YOU HAVE YOUR OWN SOURCE OF WOOD
maintenance-friendly wood-fired boilers
THE CHEAPEST WAY OF HEATING YOUR HOME
The topic of the cheapest way to heat a house is
a frequently occurring one. Wood is undoubtedly the
cheapest way by far. Even if you buy your wood ready-cut
and chopped, your fuel costs will be lower than if you use
a heat pump or district heating for example.
If you have your own source of wood or someone with
a source of wood that you can help out, you can get
free wood for relatively little effort. Modern machinery
makes cutting and chopping fast and simple. Your heating
needs for the whole year to be met in just a few hours.
It is common to get together with other wood-fired boiler
owners and rent or buy machines together.
LARGE RANGE
Värmebaronen has Sweden’s largest range of wood-fired
boilers. Our range of products offers models to suit all require-
ments. Common to them all is the easy maintenance, which
results in high efficiency, saving both time and effort.
• Combimax 30, Vedolux 40 & 50 – natural ventilation boilers
• Vedolux 30 & 37 – wood-fired boilers with a suction fan
• Vedolux CU – with integrated hot water heater
• Biomax – combines pellets and wood
WOOD-FIRINGBurning wood! Mankind’s original way
of generating warmth when it was cold
outside. Modern wood burners store
the heat from the boiler in accumulator
tanks and benefit from even heating
throughout the day.
HOW DOES IT WORK?Pile the wood in the boiler, ideally
with smaller sticks at the bottom.
Fill the entire boiler. Light with the
LPG igniter supplied for around one
minute. The boiler will now heat the
accumulator tanks.
FILM ABOUT WOODA film about wood is available on our
website www.varmebaronen.com
www.varmebaronen.seTel. +46 (0) 44 22 63 20
VÄRMEBARONEN’S SOLUTIONS
Värmebaronen has been manufacturing heating products
since 1975. Our wood-fired systems have undergone
many changes and improvements over the years. In other
words, they are proven, durable and worry-free products.
Manufacturing at our own factory in Sweden gives us an
overview of the entire production process and guarantees
the highest possible quality. A safe buy!
tried and tested
the cheapest way of heating your home
54
carbon dioxide neutral
MAINTENANCE-FRIENDLY AND EFFICIENT BOILERS
MEAN CARBON DIOXIDE-NEUTRAL HEATING
Wood is a biofuel which, when used in the right wood-fired
boiler and fired in the right way, has minimal environ-
mental impact. The carbon dioxide that is released during
combustion is the same amount of carbon dioxide that the
wood gives off when it dies and decomposes.
NATURALLY, ALL OUR WOOD-FIRED BOILERS
ARE ENVIRONMENTALLY APPROVED
All Värmebaronen’s products intended for biofuel have
been tested by the Technical Research Institute of Sweden
(SP). Because they are so easy to maintain, it is easy to
maintain the excellent characteristics. This saves both
wood and the environment.
the convenience ofmodern wood-firing
FORGET ALL ABOUT TRADITIONAL WOOD-FIRING
Forget everything you’ve heard about traditional heating
with wood. With a modern system from Värmebaronen,
you will always have an even temperature in the house,
plenty of hot water and a future-proof system which can
be connected to other heat sources such as solar panels,
pellets or heat pumps. You will also be heating your house
the environmentally friendly way!
IDEAL FOR USE IN URBAN AREAS TOO
Using Värmebaronen’s environmentally approved
systems, you can also use a wood-fired boiler in urban
areas. If you use a wood-fired boiler in the right way with
dry wood, you needn’t worry about irritating your neigh-
bours. In the past, wood was burned with minimal oxygen
in order to make it last longer. Now, firing continues
throughout the day and the heat is stored in accumulator
tanks. Pollutants and odours are eliminated.
CHOOSE AN ACCUMULATOR TANK CAREFULLY
There are many different types of accumulator tank avail-
able on the market. The simplest basically just consists
of an oil drum and associated connections. You should
choose well-equipped accumulator tanks instead. We
believe our Aqualux Teknik range offers the best and most
flexible choice. The tanks are packed full of ingenious solu-
tions to make heating as simple and efficient as possible.
A GOOD CHOICE FOR THE FUTURE
Värmebaronen’s wood-fired boilers are built to a high level
of quality using thoroughly tested materials to ensure a
long lifetime. The firebox is ceramic to enable it to tolerate
the high temperatures required for environmentally friendly
combustion. The most important factor however is that
our wood-fired boilers are the easiest on the market to
maintain.
76
Simple control panel.
Hatches which remain tight
throughout the life-time of the boiler.
Solid handles. Spacious combustion
chamber, takes 50cm wood.
Using the ash rake, you drag
the ash and soot down into the ash
box. The ash is then stored safely
in the ash box.
Ready-fitted suction fan.
Flue is included in the
delivery.
Soft rounded tubes without
awkward corners makes the boiler easy to sweep.
Using the soot brush, the boiler
can be swept from a single hatch.
Good for your back and your knees!
Fast ignition using the LPG igniter
supplied.
Cooling coil
Made in Sweden of course!
This is how a good wood-fired boiler should be constructed
THE CHEAPEST WAY OF HEATING YOUR HOME
Wood is undoubtedly the cheapest way of heating your
home by far. If you have your own source of wood or
someone with a source of wood that you can help out, you
can get free wood for little effort. Modern machinery enables
your heating needs for the whole year to be met in just a
few hours. It is common to get together with other wood-
fired boiler owners and rent or buy machines together.
For ultimate convenience, buy ready-chopped wood.
Wood is still the cheapest method of heating.
LOW MAINTENANCE COSTS
Insurance companies regularly carry out surveys of
the durability, lifetime and reliability of heating boilers.
Värmebaronen has come out well in all these surveys.
Careful material selection and many years of experience
have resulted in robust products without any irritating
minor faults. As in all wood-fired boilers, ceramic is a
consumable item. In our boilers, the ceramic consists of a
number of components and is cheap and easy to replace
when necessary. A benefit that saves money.
THE SECURITY OF A SINGLE MANUFACTURER
Naturally, you can combine our wood-fired boilers with
accumulator tanks from other manufacturers. However,
we recommend our own accumulators. This will give you
piece of mind, knowing that all the components in your
wood-fired system were made by the same manufacturer.
All components have been designed and tested to work
optimally together.
Wood-firing gives cheap home heating
98
five minutes which save both wood and time
SWEEP, REFILL AND LIGHT IN FIVE MINUTES
As people today often have hectic schedules juggling work
and family, the less time spent in the boiler room, the better.
Our philosophy is that you must be able to light the fire
without getting dirty in no more than minutes per day.
In this time, you should be able to sweep out the soot, add
new wood and light the fire. You can leave the boiler room
with a healthy conscience, happy in the knowledge that you
have not cut corners on maintenance and that the boiler
is burning efficiently. Värmebaronen is the only company
in the market to offer you this convenience and peace of
mind. No other wood-fired boilers come close to being this
maintenance-friendly.
ALWAYS MAINTAIN A HIGH LEVEL OF EFFICIENCY
When choosing a wood-fired boiler, you should always start
by looking at how you sweep and remove the ashes from
the old fire. If access is awkward, maintenance will be left
undone and the heat will be lost up the chimney. Choose
Värmebaronen instead. Your chimney-sweep will thank you
too, as his job will be easier too.
THE STAND WILL SAVE YOUR BACK
When you choose a boiler, you choose a friend that you
will have for many years to come. As you get older, you will
find that your working position is becoming more and more
important. The stand will ensure a comfortable working
position and a good working height; all maintenance is
carried out from the front. Convenient!
it really is this simple:
EASY ACCESSOn Värmebaronen’s wood-fired boilers, all ducts are swept
from just one hatch on the front. All hatches on the boiler
have a quick-release handle. No tools are required.
As the flue gas ducts are round, there are no awkward
corners to reach into when sweeping. You will be in a
comfortable working position and have complete control
over what you are doing.
Sweeping the flue gas ducts takes about half a minute. If
you have turbulators in the flue gas ducts, you can add
around a minute before you are done.
QUICK, SAFE AND CLEANTo avoid having to kneel while adding wood and raking
ashes, the boiler can be placed on a stand.
The stand includes a practical ash box which stores the
ashes safely. The ashes can be raked straight into the box,
preventing dirt from getting onto you and the floor.
Raking out the ashes takes no more than a minute.
LIGHTING THE FIRE REALLY IS THIS EASYLighting the boiler is done quickly. Place a small bundle of
sticks in the bottom and then fill the entire firebox with wood.
Using the LPG igniter supplied, you then light the fire
directly in about a minute. The fire establishes itself quickly,
giving environmentally friendly combustion in no time at all.
You also avoid having to wait for the bed of embers before
topping up the wood.
a healthy conscience with a well-maintained wood-fired boiler
1110
Vedolux 30 Vedolux 37
wood-fired boilers suction fan
THE LEAST DEMANDING CHIMNEY REQUIREMENTS
Thanks to the integrated fans, the Vedolux 30 and Vedolux
37 have some of the least demanding chimney require-
ments on the market. If you have a chimney with low
suction, these boilers are therefore an excellent choice.
The fan is of the suction type, which eliminates the risk of
drawing smoke into the house.
SUCTION FAN
The fan is started with a single press of a button when you
start firing. When the fire goes out, the fan will stop auto-
matically. This is important to ensure that the boiler does
not cool down, as this would reduce its efficiency.
50CM WOOD
Both boilers are designed for 50cm wood. They do not
have an integrated hot water heater, so it is important there
is a water heater in one of the accumulator tanks to which
they are connected.
A stand is available as an accessory and has a built-in ash
box for the safe storage of the ash.
POWER OUTPUT AND HATCHES – DIFFERENCES
In addition to the difference in power output, the boilers
also differ in terms of the type of hatch used. The Vedolux
37 uses the same type of hatch as the natural ventilation
boilers, with a removable plate for the pellet burner. The
Vedolux 30 is equipped with replaceable hatches instead.
wood-fired boilers natural ventilation
Combimax 30 UB Vedolux 50 UB Vedolux 40 UB Vedolux CU
WITH NATURAL VENTILATION OF COURSE
If you have a traditional chimney with sufficient height and
a suitable diameter pipe, the choice is simple – make use
of your chimney and choose a natural ventilation boiler! If
you are unsure, contact our heating advisors who will help
you with your questions.
All boilers are prepared for Viking Bio pellet burners.
COMBIMAX 30 UB
Small natural ventilation boiler with a firebox depth of
40cm. The same robust construction as its bigger brothers.
Ceramic firebox with reverse combustion.
Solid and reliable hatches which last the lifetime of the boiler.
Stand available as an accessory. Easy to fit pellet burner.
VEDOLUX 40 & VEDOLUX 50
Natural ventilation boilers with a firebox depth of no less
than 57cm, with a good margin built-in for 50cm wood.
Ceramic firebox with reverse combustion and solid and
reliable hatches which last the lifetime of the boiler. The
stand is an accessory for the Vedolux 40, included with the
Vedolux 50. Easy to fit pellet burner.
VEDOLUX CU WITH HOT WATER HEATER
The best choice if you have accumulator tanks without
a hot water heater. The Vedolux CU has a substantial
copper-lined heater and a 57cm firebox depth and is
otherwise the same design as the Vedolux 40 & 50. Two
sockets for immersion heaters. Stand not available as an
accessory. Easy to fit pellet burner.
1312
THE HEART OF YOUR HEATING SYSTEM
The cosy heat from your wood-fired boiler is stored in
one or more accumulator tanks. These tanks can contain
several thousand litres of water, depending on the heating
needs of the house. The accumulator tanks can also store
heat from other heat sources, such as solar panels, pellets
or heat pumps.
ENVIRONMENTALLY FRIENDLY AND CONVENIENT
A modern wood-fired boiler is designed to operate at full
power at all times. This ensures efficient combustion and
minimal environmental impact. A control system ensures
that the accumulator tanks are charged optimally. This
greatly reduces firing frequency.
Aqualux accumulator tanksWELL-INSULATED AND COMPACT
Accumulator tanks must be well-insulated, take up little
space and, above all, be as flexible as possible. This
enables you to connect a number of different heat sources
at the same time, e.g. solar panels, pallets and/or heat
pumps. Solar panels are a good choice for anyone with a
wood-fired boiler, as they can produce heat and hot water
during the summer months. Convenient! Värmebaronen
also offers more basic accumulator tanks; see our cata-
logue for our range of accumulator tanks.
THE IDEAL TANK FOR WOOD/SOLAR POWER
Aqualux Teknik can handle a number of heat sources
simultaneously whilst maintaining stratification in the tank.
We believe the Aqualux Teknik is the only tank on the
market that can do this. This makes it unique and means
you save even more money on your heating bills. The
Aqualux Teknik features an integrated solar coil to transfer
heat from the solar panels. A large, copper-lined hot water
heater ensures there is plenty of hot water on tap.
Aqualux TeknikAccumulator tanks withsolar coil and hot water heater160 litres
Ordinary water stores the heat
Using our Aqualux Teknik tanks, you can combine wood with solar heating.
Acktank CU/UB, basic tanks with fewer connection options.
1514
AQUALUX 500 | 750 | 1000 TEKNIK
The obvious choice when you want the best and to be
prepared for anything. You can connect any heat source
and combine heat sources as you wish. Unique functions
ensure that the vital stratification in the tank water remains.
This is essential for the efficient operation of an accumu-
lator tank.
ACKTANK CU/UB
Basic tanks without solar coils. When one heat source at a
time is used, these tanks have excellent stratification prop-
erties. Read more in the separate catalogue.
A GOOD TANK IS FUTURE-PROOF
Energy prices often fluctuate depending on supply and
on the decisions of politicians. It wasn’t that long ago that
mains powered electric radiators were recommended in all
new houses. It is therefore important to look forward and
make sure you are prepared for the future.
With the right accumulator tank, you can connect a variety
of heat sources and use them according to what is most
appropriate at any one time. Fire with wood when you
have the time and run the heat pump when you feel like
it. If the price of electricity soars, install a pellet burner in
the wood-fired boiler’s custom-made outlet. Pellets are
always cheap. In the spring, take a 6-month break from
using wood and let the solar panels produce the heat and
hot water.
It’s the tank that counts.
Flow reducers
Stratification plates
Electrical connections
Thermometers for the top, middle and bottom of the tank are placed together, so you don’t have to bend down in order to read them.All sensor connections are easily accessible. The servicing cover can be removed with a single screw.The tank is also prepared for the concealed installation of an electric immersion heater.
Thermometers
The Aqualux Teknik range. 500, 750 and 1000 litres.
Vedolux 30, Aqualux 500 Teknik and Aqualux 500 UB
K2 solar panels
Hot water heater160 litres, copper-lined.The height of the heater improves the stratification characteristics of the tank.Copper solar coil
500: 10m750: 12m
90mm insulation in jacket and at top
combine heat sources
1716
Zzzz...
Zzzz...
With solar panels, both you and your heating system can have six months’ rest. Of course, your time off will vary according to the weather and the type of house.
TAKE SIX MONTHS OF THE YEAR OFF WITH
SOLAR PANELS!
Forget about your heating from April to October. As a
wood-fired boiler owner, it’s nice not to have to plan when
to fire up the boiler for hot water for showers, baths and
dishwashing.
MANY ADVANTAGES
• Free energy from the sun means very low heating costs
• Minimal effort, boiler firing season halved
• No environmental impact
• Simple maintenance gives a high degree of comfort
FREE HOT WATER FOR SIX MONTHS OF THE
YEAR
With solar panels of the correct dimensions, you will only
need solar panels to produce hot water during the summer
months. This means you don’t have to fire up the boiler in
order to get hot water. Even in the north of Sweden, solar
panels produce sufficient heat. It is important to arrange for
a professional to determine the number and size of solar
panels on the accumulators.
ORDER CATALOGUE K2 SOLAR PANELS
There is a separate catalogue available for Värmebaronen’s
K2 solar panels, which can be ordered or downloaded from
www.varmebaronen.com
On our website, you will also find some interesting reading
about solar heating, the perfect supplement to wood-firing.
Woodand K2 solar panels
K2SOLFÅNGARSYSTEM
January February March April May June JulY August September October November December
Boiler Boiler Boiler Sun Sun Sun Sun Sun Sun Boiler Boiler Boiler
Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday Tuesday Wednesday Thursday Friday Saturday
1918
MODERN BOILER WITH PROVEN TECHNOLOGY
Biomax gives you the freedom to choose your fuel
according to what you find most convenient and econom-
ical. The boiler works just as well using pellets as it does
with wood. The separate fireboxes make choosing your
energy source easy. The built-in 9kW boiler is also suffi-
cient for most homes.
COMPLETE FREEDOM
You can for example use wood during the spring
and autumn and pellets during the winter. During the
summer, you can use pellets or electricity for hot water.
You can choose what suits you best. When you don’t
want to use wood, pellets are still very economical.
The boiler’s integrated electric boiler is also available as
a backup.
SIMPLE WOOD-FIRING
The wood firebox is designed for reverse combustion with
ceramic grates and secondary combustion chamber in
the same way as our wood-fired boilers. In the case of
wood-firing, the Biomax must be connected to one or more
accumulator tanks.
CONVENIENT PELLET-FIRING
The Viking Bio pellet burner can always be left fitted to the
boiler. The burner hatch has a quick-release handle and
can be opened out so that the burner is suspended by the
side of the boiler. A removable ash box at the bottom of the
combustion chamber makes it easy to empty the boiler of
ash. The Biomax is of course environmentally approved.
Wood and pelletsBiomax
WHAT ARE FUEL PELLETS?
Pellets are a biofuel that is manufactured from some form
of sawdust. The actual pelleting process is a method of
preserving and concentrating the material. The timber is
dried and pressed together to form a rod, which is then
divided up into short lengths.
HOW DOES IT WORK?
The pellets are kept in a store which can be of varying
size. From there, the fuel is automatically fed by a screw
to a pellet burner. The pellet burner is thermostatically
controlled and starts and stops automatically. This method
gives convenient heating with little maintenance.
Fuel pellets
The rotating burner hatch and removable ash box make it easy to keep clean.
2120
A A
1488
+20
-0
343+2
0-0
1167
1510
+20
-0
1637
+20
-0
1265
1209
166
876
1145
+20
-021
489
868
95+2
0-0
145
210
181
133
Wood accessories Vedolux 30
No liability can be accepted for any printing or typographical errorsNo liability can be accepted for any printing or typographical errors
Minimum distance 200mm between the rear of the boiler and the wall!
Vedolux 30 Art No. 2206Weight empty
water-filled290 390
kg kg
Volume 100 litresDesign pressure 1.5 barMax. operating temperature
110 °C
Power output wood: nominal 30, max. 33 kWpellet 40 kW
Hearth volume 90 litresdepth 550 mm
Log length 500 mm
Log hatch w x h 300 x 246 mmChimney requirements
height ≥3,5 m
flue Ø ≥100 mmsuction -10 / -20 Pa
Voltage 230V~, 50HzFan 50 WEnclosure class P 21
1. Hot water outlet, riser, G32 int.2. Hot water outlet, return, G32 int.3. Flue, standard.4. Connections for cooling coils,Ø15mm CU.5. Lift, Expansion, Safety connection, G25 int.6. Suction fan20. Flue Up, accessory. Art No. 294221. Stand, accessory.
Complete delivery• Angled flue • Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Electrical wiring
Accessories• Flue Back/Up (see sketch)• Stand Art No. 2962• Pellet hatch kitArt No. 2970
2
3
4
5
1
4
5
5
20
6
21
• Stand Vedolux 30 Art No. 2962• Stand Vedolux 37 Art No. 2960• Stand Combimax 30 UB Art No. 2916• Stand Vedolux 40 UB Art No. 2903 All inclusive of ash box
Acc control 3 Art No. 2912Automatic charger for boilers without hot water heater
Acc control 11 Art No. 2923Automatic charger for boilers with hot water heater
Flue extensionArt No. 2907Black lacquered steel tube 1.0 metre
Flue Up Art No. 2921Combimax 30 UB
Flue UpArt No. 2938
Flue Back/UpArt No. 2942Vedolux 30/37
ACK VA VARM
Automatic hot tap water unit
Complete unit for production of
hot water. Connected to an accu-
mulator tank or a heating boiler.
RSK 652 54 91, Art No. 2952
Flue Down/UpArt No. 2909(Contact chimney-sweep before downward installation)Inclusive of soot hatch
Pellet hatch kit Vedolux 30Art No. 2970Suction hatch included. For pellet burners
Modification kit small wood hatchArt No. 3322For pellet burners
Modification kit large wood hatchArt No. 3321For pellet burners
Suction hatch 1Art No. 2910For pellet firing
Suction hatch Vedolux 30/37Art No. 2961Replaces the fan for pellet firing
Valve packArt No. 2927Aqualux Teknik
Shunt packArt No. 2918Aqualux Teknik
TurbulatorsCan improve the efficiencyof your wood-fired boiler. Checkthat the chimney suction is sufficientif you have a natural ventilation boiler.
Air separator Venting valve safeguardssystem operation.
2938
2907
2921
2942
2909
2938
2907
2921
2942
2909
2938
2907
2921
2942
2909
2938
2907
2921
2942
2909
2938
2907
2921
2942
2909
2322
1536
+20
, -0
327
+20,
-012
32
1692
+20
, -0
1559
+20
, -0
211
146
930
531
97 +
20, -
0
870
1209
+20
, -0
19
181
133
1310
1202
868
133
166
733
888
553
1083
+1
0 0
1133
+1
0 0
575
95
829
+10
-0
1570
+20
-0
425+
20 -0
1254
+10
-0
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180
1. Hot water outlet, riser, G32 int.2. Hot water outlet, return, G32 int.3. Flue, standard.4. Connections for cooling coils,Ø15mm CU.5. Lift, Expansion, Safety connection, G25 int.6. Sleeve, G20 int.20a. Flue Up, accessory. Art No. 293820b. Flue Up C30UB, accessory. Art No. 292120c. Flue Down/Up, accessory. Art No. 2909 + 290721. Stand, accessoryArt No. 2916
Complete delivery• Flue Back• Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Pressure and temperature gauges
Vedolux 37 Combimax 30 UB
No liability can be accepted for any printing or typographical errorsNo liability can be accepted for any printing or typographical errors
2
4
5
1
4
6
3
5
5 Minimum distance 200mm between the rear of the boiler and the wall!
Vedolux 37 Art No. 2202Weight empty
water-filled320 440
kg kg
Volume 120 litresDesign pressure 1.5 barMax. operating temperature
110 °C
Power output wood: nominal 37, max. 42 kWpellet 42 kW
Hearth volume 105 litresdepth 550 mm
Log length 500 mm
Log hatch w x h 290 x 230 mmChimney requirements
height ≥3,5 m
flue Ø ≥100 mmrecommended chimney area: Ø145 mm
suction -10 PaVoltage 230V~, 50HzFan 50 WEnclosure class P 21
1. Hot water outlet, riser, G32 int.2. Hot water outlet, return, G32 int.3. Flue, standard.4. Connections for cooling coils,Ø15mm CU.5. Lift, Expansion, Safety connection, G25 int.6. Suction fan20. Flue Up, accessory. Art No. 294221. Stand, accessory.
Complete delivery• Angled flue • Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Electrical wiring
Accessories• Flue Back/Up (see sketch)• Stand RSK Art No. 2960
Combimax 30 UB Art No. 2006Weight empty
water-filled240 390
kg kg
Volume 150 litresDesign pressure 1.5 barMax. operating temperature
100 °C
Power output wood: nominal 25, max. 30 kWpellet 25-50 kW
Hearth volume 70 litresdepth 400 mm
Log length 380 mmLog hatch w x h 290 x 235 mmChimney requirements
height ≥7 m
flue Ø ≥150 mmsuction -20 Pa
5
1
5
6
4
5
4
21
2
3
20a
20
21
20b 20c
2524
1600
+20
0
630
601
1182
1362
+2
0 0
973
110
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180
20a
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180 20c
855
63011
15+2
0 0
60010
5
1058
895
+20
-0
1600
+20
-0
425+
20 -0
1320
+20
-0
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180
20a120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180 20c
Vedolux 40 UB Vedolux 50 UB
No liability can be accepted for any printing or typographical errors No liability can be accepted for any printing or typographical errors
5
1
5
6
4
5
4
2
21
Vadelox 40 UB Art No. 2102Weight empty
water-filled350 483
kg kg
Volume 133 litresDesign pressure 1.5 barMax. operating temperature
100 °C
Power output wood: nominal 35, max. 40 kWpellet 25-50 kW
Hearth volume 120 litresdepth 575 mm
Log length 500 mmLog hatch w x h 290 x 230 mmChimney requirements
height ≥7 m
flue Ø ≥180 mmsuction -20 Pa
1. Hot water outlet, riser, G32 int.2. Hot water outlet, return, G32 int.3. Flue, standard.4. Connections for cooling coils,Ø15mm CU.5. Lift, Expansion, Safety connection, G25 int.6. Sleeve, G20 int.20a. Flue Up, accessory. Art No. 293820c. Flue Down/Up, accessory. Art No. 2909 + 290721. Stand, accessory.
Complete delivery• Flue Back• Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Pressure and temperature gauges
Accessories• Flue, several designs• Stand Art No. 2903
5
5 5
1
2
4 4
63
Vedolux 50 UB Art No. 2101Weight empty
water-filled400 655
kg kg
Volume 255 litresDesign pressure 1.5 barMax. operating temperature
100 °C
Power output wood: nominal 44, max. 50 kWpellet 40-60 kW
Hearth volume 165 litresdepth 575 mm
Log length 500 mmLog hatch w x h 290 x 230 mmChimney requirements
height ≥8 m
flue Ø ≥180 mmsuction -24 Pa
1. Hot water outlet, riser, G32 int.2. Hot water outlet, return, G32 int.3. Flue, standard.4. Connections for cooling coils,Ø15mm CU.5. Lift, Expansion, Safety connection, G25/G32 int.6. Sleeve, G20 int.20a. Flue Up, accessory. Art No. 293820c. Flue Down/Up, accessory. Art No. 2909 + 290721. Stand, included.
Complete delivery• Stand • Flue Back• Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Pressure and temperature gauges
Accessories• Flue, several designs
21
3
2726
181
145
210
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180
20a
120
418
180 Ø155INV
70
110
210
210
85
MIN
(155
) 295
MAX
122
5
180
130
450
205
150
Ø170 inv.Ø175 utv.
Ø147.2 inv.Ø152.4 utv.
50
180 20c
Vedolux CU Biomax
No liability can be accepted for any printing or typographical errorsNo liability can be accepted for any printing or typographical errors
1 2
3 3
4
5
6
3
9
22 22
Accessories• Flue, several designs• Pellet hatch kit (for burners from other manufacturers)• Conversion kit for oil burners
56
3
4
1 2
33
Vedolux CU Art No. 2110Weight empty
water-filled430 775
kg kg
Volume 215 litresHot water heater 130 litresDesign pressure 1.5 barMax. operating temperature
95 °C
Power output wood: nominal 28, max. 35 kWpellet 20-50 kW
electric 2x9 kWHearth volume 105 litres
depth 575 mmLog length 500 mmLog hatch w x h 290 x 230 mmChimney requirements height ≥7 m
flue Ø ≥180 mmsuction -20 Pa
1. Feed pipe, clamp ringØ 22mm2. Return pipe, clamp ringØ 22mm3. Lift, Expansion, Safety connection, G 25/32 int.4. Hot water outlet, G 32 int., provided on both sides of
the boiler.5. Incoming cold water, clamp ring – Ø 22mm.6. Hot tap water, clamp ring Ø 22mm.9. Sleeve G 20 int. Max. sensor tube depth 100mm20a. Flue Up, accessory. Art No. 293820c. Flue Down/Up, accessory. Art No. 2909 + 290722. Connection G 50 int. for immersion heaterComplete delivery• Suction regulator• Flue Back• Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Pressure and temperature gauges
Accessories• Flue, several designs
Biomax Art No. 2207Weight empty
water-filled350 640
kg kg
Volume 190 litresHot water heater 100 litresDesign pressure 1.5 barMax. operating temperature
95 °C
Power output wood 20 kWpellet 20 kW
Electric 9 kWHearth volume 55 litres
depth 400 mmLog length 380 mmLog hatch w x h 185 x 235 mmChimney requirements height ≥7 m
flue Ø ≥150 mmsuction -20 Pa
Voltage 400V 3N~, 50 HzPower 13.1 AEnclosure class IP 21
1. Feed pipe, clamp ringØ 22mm2. Return pipe, clamp ringØ 22mm3. Lift, Expansion, Safety connection, G 25 int.4. Hot water outlet, G 25 int., provided on both sides of
the boiler.5. Incoming cold water, clamp ring – Ø 22mm.6. Hot tap water, clamp ring Ø 22mm.20. Straight flue, accessory. Art No. 2936
Complete delivery• Flue with lockable backdraught hatch• Sweeping tool with bracket• LPG igniter (bottle excluded)• Flue gas thermometer• Drainage valve• Pressure and temperature gauges• Load monitor inc. transformers
20
WE MANUFACTURE ALL OUR PRODUCTS AT OUR OWN FACTORY IN SWEDEN.
Here at Värmebaronen, we believe it is important
to have complete control over the entire production
process from design to delivery. We also believe it is
important to protect Swedish jobs and the Swedish
environment. It is not just in the supermarket that it’s
important to buy local products.
At Värmebaronen, you will find pellet, wood and
combination boilers. You will also find pellet burners,
solar panels, electric boilers and additional heating
for heat pumps.
Värmebaronen ABArkelstorpsvägen 88SE-291 94 KristianstadTel +46 44 22 63 20Fax +46 44 22 63 [email protected]
ORDER MORE PRINTED MATTER
We have many more catalogues, folders and product
sheets. Call or visit www.varmebaronen.se and order.
• Economical and environmentally friendly pellet-firing
• Solar heating, K2 solar panel system
• Range, Accumulators
• Electric heating and additional heating
• Electric boilers for industrial and domestic use
• Approximate price list
• Servicing catalogue, spare parts
• Printed matter in English and German
• DVD films about wood, pellets and installation
Office and modern production facility at Österslöv, 10km north of Kristianstad in Skåne
VB In
hous
e 13
0212
• Ph
oto:
Jön
sson
s bi
lder
, Ben
ny O
lson,
Em
elie
Per
sson
• Pr
intin
g: w
ww.lit
ogra
fen.
se
No li
abilit
y ca
n be
acc
epte
d fo
r any
prin
ting
or ty
pogr
aphi
cal e
rrors
.
RETAILERS:
MADE IN SWEDEN