Wirepath Plastic Enclosures - SnapAV
2
A- Conduit Entry • The 1.75” knockouts on the top and bottom accommodate 1.25” conduit. B- Platform Attachment Slot • (8) Attachment points on the 30”, (12) Attachment points on the 42” C- Module Attachment Holes D- Enclosure Mounting Locations • Drive screws into the open screw slots located along the sides of the enclosure. E- Surface Mount Holes F- Removable Conduit Knockout Panel & Single Gang Knockouts • Large panel for Wattbox. Follow the installation instructions included with the WB-200-VB (sold separately). G- Drywall Markings • Drywall hole markings indicate 1/2”, 5/8”, or 3/4”. depths. • Standard hole track at the center allows for easier installation once in place. Note: Once installed, place the protective drywall cover on to protect the enclosure during drywalling. Wirepath Plastic Enclosures A B C E F G D WP-ENCL-30 WP-ENCL-42 Hardware Pack 1 1 Grommets 6 6 *Hardware Pack and grommets not shown Thank you for purchasing a great product from Wirepath Structured Wiring. The Wirepath Plastic Enclosure is designed to provide the most flexibility for your equipment installation. G ½˝ ⅝˝ ¾˝ WARNING: ELECTRICAL SHOCK HAZARD! Cutting or drilling into electrical wires or cables can cause death or serious personal injury! ALWAYS make certain the area behind mounting surfaces is free of electrical wires and cables before cutting, drilling, or installing fasteners. DANGER: IMPROPER WIRING CAN LEAD TO DEATH OR SEVERE PERSONAL INJURY! Grounding must be installed by qualified personnel using a UL Recognized No. 12 AWG Green and Yellow grounding wire connected to the grounding lug on the enclosure. Proper grounding of the unit should be verified by a waulified electrician and compliant with the National Electrical Code. ! !
Transcript of Wirepath Plastic Enclosures - SnapAV
A- Conduit Entry• The 1.75” knockouts on the top and bottom accommodate 1.25”
conduit.
B- Platform Attachment Slot• (8) Attachment points on the 30”, (12) Attachment points on the 42”
C- Module Attachment Holes
D- Enclosure Mounting Locations• Drive screws into the open screw slots located along the sides of
the enclosure.
E- Surface Mount Holes
F- Removable Conduit Knockout Panel & Single Gang Knockouts
• Large panel for Wattbox. Follow the installation instructions included with the WB-200-VB (sold separately).
G- Drywall Markings
• Drywall hole markings indicate 1/2”, 5/8”, or 3/4”. depths.• Standard hole track at the center allows for easier installation once
in place.
Note: Once installed, place the protective drywall cover on to protect the enclosure during drywalling.
Wirepath Plastic Enclosures
A
B
C
E
F
G
D
WP-ENCL-30 WP-ENCL-42Hardware Pack 1 1Grommets 6 6
*Hardware Pack and grommets not shown
Thank you for purchasing a great product from Wirepath Structured Wiring. The Wirepath Plastic Enclosure is designed to provide the most flexibility for your equipment installation.
G
½˝
⅝˝
¾˝
WARNING: ELECTRICAL SHOCK HAZARD! Cutting or drilling into electrical wires or cables can cause death or serious personal injury! ALWAYS make certain the area behind mounting surfaces is free of electrical wires and cables before cutting, drilling, or installing fasteners.
DANGER: IMPROPER WIRING CAN LEAD TO DEATH OR SEVERE PERSONAL INJURY! Grounding must be installed by qualified personnel using a UL Recognized No. 12 AWG Green and Yellow grounding wire connected to the grounding lug on the enclosure. Proper grounding of the unit should be verified by a waulified electrician and compliant with the National Electrical Code.
!
!
Limited Lifetime Warranty This Wirepath Product has a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified, or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
Lifetime
Rev: 191002-1630www.snapav.com Support: 800.838.5052
NOTE: Available accessories include the Doors with Trim Kit, Platform Kit, Drop in Wattbox and WirePath One Shelf.
Top View With Door
30" Front No Door 42" Front With Door
D
H
E
F
A
G
C
B
DIMENSIONS
Product MeasurementA B C D E F G H
WP-ENCL-3014.44” 4” 15.63” 2.06”
30”4.64” 8.75”
31.25”
WP-ENCL-42 42” 43.27”
