WELDING, HARD FACING, OVERLAY, & HEAT TREATMENT MACHINERYFeaturing: Tig, Pulse Mig, & Plasma Transfer Welding Systems, Wide Selection of Side Beam Systems With Oscillators,

Welding Positioners to 12,000 Lb., Welding Manipulators, Flame Hardening & Heat Treating Equipment,Forklifts, as New as 2002, Rolling Stock, High Quality Office Furniture, Much, Much More!

Plus Real Estate to Be Sold by Private Negotiation, See Page 11

At the premises of

ALLOY WELDING, INC.7218 Canal

HOUSTON, TEXAS 77011(See Directions on Back Page)

THURSDAY, DECEMBER 910:00 A.M.

INSPECTION: Wednesday, December 89:00 A.M. to 4:00 P.M. & Morning of Sale

A 10% BUYER’S PREMIUM WILL APPLY

Read Terms and Conditions on Back Page of BrochureLARGE CAPACITY WELDING SYSTEM CELL

WELDWIRE SUB-ARC WELDER & JETLINE WELDING LATHE

M&M CAR BOTTOM STRESS RELIEVING FURNACE

16' VERTICAL 12-HEADFLAME HARDENING MACHINE

AUCTION

Sale Conducted By:

PLANT & MACHINERY INC.AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE

Bob Braman TX #6362 • Ron Moore TX #7314Jack Introligator TX #11749 • Les Miles TX #6915

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: pmi@pmi-auction.comWEBSITE: www.pmi-auction.com

2

Auctioneer’s Note: Most of the welding machinery outlinedin this brochure is currently arranged into multi-function cells.Most cells feature a side beam positioning device (either apositioner or welding lathe), and an array of TIG, Pulse MIG, andSub-Arc welding equipment. The equipment in these cells will beoffered individually, AND as complete cells with each saleconfirmed to the highest bidder or bidders. Please contact theauctioneer for further details.

VIEW OF MANIPULATOR & POSITIONER CELL VIEW OF MULTIFUNCTION WELDING CELL

VIEW OF SUB-ARC WELDING CELL

LARGE CAPACITY WELDING SYSTEM CELL

PLASMA TRANSFERRED ARC WELDING CELL

EXTERNAL HARD BANDING SYSTEM CELL

At the premises of

ALLOY WELDING INC.7218 Canal • HOUSTON, TEXAS 77011

THURSDAY, DECEMBER 9 • 10:00 A.M. INSPECTION: Wednesday, December 89:00 A.M. to 4:00 P.M. & Morning of Sale

AUCTION

3

SIDE BEAM SYSTEMS(3) WELDWIRE CANTILEVERS, POWERED ELEVATION SUB-ARC,Mdl. 01-48, 180" beam length, 12" to 84" or 96" adj. beam height,Linde OM-48 rack and pinion welding carriage, J Governor, LincolnMdl. NA3N sub-arc welding head w/flux hopper, Gralab Mdl. 605 digitaltimer system, Lincoln Idealarc AC 600 welding pwr. supply, 600 ampoutput @ 44 v., 100% duty cycle.

WELDWIRE CANTILEVER,POWERED ELEVATION, 180" beam length,12" to 96" adj.beam height, Linde OM-48 rack and pinion welding carriage,J Governor, Gralab 600 digital timer, Miller oscillator and voltage control.

(2) WELDWIRE CANTILEVERS, POWERED ELEVATION, 180"beam length, 12" to 84" beam height, Linde OM-48 rack and pinionwelding carriage, J Governor, Gralab 600 digital timer, Miller oscillatorand voltage controls.

WELDWIRE CANTILEVER, POWERED ELEVATION, 144" beamlength, 12" to 84" adj. beam height, Linde OM-48 rack and pinion weldingcarriage, Type E electronic governor, Gralab Mdl. 600 weld timer, Millerweld oscillator and voltage controls, cold wire TIG welding head.

WELDWIRE CANTILEVER, POWERED ELEVATION, 120" beamlength, 12" to 96" adj. beam height, Linde OM-48 rack and pinion weldingcarriage, J Governor, Gralab Mdl. 605 weld timer, Miller oscillator andvoltage controls, plasma transferred arc head.

JETLINE MDL.TLK-72, 72" beam length, fixed height, welding carriage,S/N 8001.

JETLINE ENGINEERING MDL. TKX-24, adj. beam height, linearbearing slide w/24" travel, caster mounted frame, 8" vert. welding headadj., Miller oscillator and voltage controls, cold wire TIG welding head,S/N 82201.

WELDING MANIPULATORS(2) ARONSON 8' X 8', Mdl. G8VRA8CL-PK, 96" vert. travel, 96" reach,26" min. height, 125" max. height, Gralab 600 weld timer, Miller oscillatorand voltage controls, spider base, S/N 78383 arranged for internalhard banding, S/N 79393 eqpd. w/Tapco external hopper feed carbidehard banding system.

(5) ARONSON 4' X 4' “CRICKETS,” Mdl. 1C04MR04CL-MKMT, 48" lifttravel, 48" reach travel, Millermatic weld oscillator and voltage controls,Gralab 600 cycle timer, variable spd. travel controls, roller cart base, S/N8299, S/N 8046 and S/N 8053, eqpd. w/CK Worldwide Mdl.WF-3 coldwire TIG feeder, S/N 798 and S/N 7923 eqpd. w/flame hardening head.

WELDWIRE MDL.WW 4X4, 48" travel, 49" lift cap., roller base, Milleroscillator and voltage control, Gralab 600 cycle timer, control pedestal,S/N 9683.

WELDWIRE CANTILEVER PWR. ELEVATION SIDE BEAM SYSTEM

WELDWIRE SIDE BEAM SYSTEM & 10,000 LB. POSITIONER

JETLINE SIDE BEAM SYSTEM & ARONSON POSITIONER

ARONSON 8' X 8' MANIPULATOR & CUSTOM WELDING POSITIONERARONSON “CRICKET” 4' X 4'WELDING MANIPULATOR

8' X 8' ARONSON WELDING MANIPULATOR

8AVAILABLE

2AVA

ILABLE5

AVAILAB

LE

4

10,000 LB. ARONSONWELDING POSITIONER

12,000 LB. ARONSONPWR. ELEVATINGWELDING POSITIONER

2,500 LB. SCIAKYWELDING POSITIONER

4,500 LB. ARONSONWELDING POSITIONER

4AVAILABLE

At the premises of

ALLOY WELDING INC.7218 Canal • HOUSTON, TEXAS 77011

THURSDAY, DECEMBER 9 • 10:00 A.M. INSPECTION: Wednesday, December 89:00 A.M. to 4:00 P.M. & Morning of Sale

AUCTION

WELDING POSITIONERSARONSON 12,000 LB. CAP., Mdl. GE120-9, 16,800 lb. cap. @6" C. of G., 12,000 lb. cap. @12 " C. of G., 54" sq. platen, 9" hollowspindle thru platen, 25" 3-jaw chuck, w/10" hole thru, pwr. tilt,variable spd. rotation, geared power elevation, S/N 647.

ARONSON 10,000 LB. CAP., Mdl. DH100A, 10,000 lb. @ 12" C.of G., 48" sq. platen, 36" dia. 4-jaw independent chuck, pwr. tilt,variable spd. rotation, control pedestal, S/N 80442.

SCIAKY 5,000 LB. LOAD CAP., Mdl WP1-50-60, .02 min. and2.0 max. RPM, 60" round platen, 10" through hole, variable spd.rotation, pwr. tilt, adj. height, 24-3/4" dia. through hole 3-jaw universalchuck w/10" through hole, S/N 9840.

ARONSON 4,500 LB. CAP., Mdl. HD45A, 6,575 lb. cap., @ 6" C.of G., 4,500 lb. cap. @ 12" C. of G., 36" sq. platen, pwr. tilt androtation, adj. height base, S/N 81462.

ARONSON 3,000 LB. CAP., Mdl. SHD30A, 4,400 lb. cap. @ 6" C.of G., 3,000 lb. cap. @ 12" C. of G., 36" sq. platen, adj. height basegeared tilt, variable spd. rotation, 25" dia. 3-jaw universal chuck, 10"hollow spdl., pendant control, S/N 79407.

(4) SCIAKY 2,500 LB. CAP., Mdl. WP-2A, 42" dia. round weldingplaten, 9" dia. hole thru platen, adj. height base, variable spd. rotation,pwr. tilt, control pendant, 24-3/4" dia. 3-jaw universal chuck, w/10"through hole, S/N 6487, S/N 6042, S/N 6562, S/N 6475.

ARONSON 2,500 LB. CAP., Mdl. HD25A, 2,500 lb. cap. @ 6" loadcenter, 1,700 lb. cap. @ 12" load center, 30" sq. platen, 19-1/2" dia.3-jaw universal chuck, 7-1/2" hole, geared tilt, variable spd. rotation,pendant control, S/N 751223.

ARONSON 2,500 LB. CAP., Mdl. HD25EDC, 2,500 lb. cap. @6" C. of G., 1,700 lb. cap. @ 12" C. of G., 36" T-slotted round platen,19-1/2" dia. 3-jaw chuck with 7-1/2" through hole, S/N 66796.

RANSOME 2,500 LB. CAP., Mdl. 25-P, 2,500 lb. cap. @ 6" C.of G., geared tilt, variable spd. rotation, 36" dia. round platen,25" dia. 3-jaw universal chuck, w/10" hole, foot pedal, pendentcontrol, S/N 163632.

ARONSON 2,000 LB. CAP., Mdl. HD20A-PTVR2, 2,000 lb. cap.@ 6" C. of G. 1,000 lb. cap. @ 12" C. of G., adj. height base, 24"rd. platen, variable spd. rotation, pwr. tilt, S/N 811027.

ARONSON 1,000 LB. CAP., 30" dia. round slotted platen, variablespd. rotation, pwr. tilt, adj. height base, foot pedal and pendant control.

CUSTOM 1,000 LB. CAP. (APPROX.), 30" dia. platen, pwr. tilt androtation, adj. ht. base.

PRESTON-EASTON 500 LB. CAP., Mdl. PA-5MT, 500 lb. cap., @4" C. of G., 22" round platen, manual tilt, variable spd. rotation,S/N PA5-48.

ARONSON 300 LB. CAP., Mdl. AW3000A, on roller stand, 8" dia.platen, foot pedal control, S/N 7593.

(2) FRANK PENNY 300 LB. CAP., Mdl. 1 CV, 18" dia. roundplaten, 8" dia. 3-jaw universal chuck, 2-3/4" hole in chuck, pwr. tilt,variable spd. rotation, foot pedal control, on fabricated steel stand,S/N A14-4D, S/N N.A.

(3) ARONSON 200 LB. CAP., Mdl. D2A, 200 lb. @ 6" C. of G., 125lb. @ 12" C. of G., 12" dia. round platen, 8" dia. 3-jaw universalchuck, 2-3/8" spdl. hole, foot pedal control, manual tilt, variable spd.rotation, adj. height, S/N 7795, S/N 7794, S/N 7689.

PANDJIRIS MDL. 1VRHT WELDMORE, approx.150 lb. cap., manualtilt, variable spd. pwr. rotation, G.E. 1/3 HP drive motor, foot pedalcontrol, S/N 25-847-1.

(3) ARONSON 100 LB. CAP., Mdl. BL-A, 100 lb. cap. @ 1" C.of G., manual tilt, 14-1/2" round welding platen, variable spd.rotation, (2) w/6" dia. 3-jaw universal chucks, S/N 1027845, S/N1028687, S/N 1027844.

(2) MBC 100 LB. CAP., Mdl. BP-1, 12" dia. round platen, manualtilt, variable spd., rotation, 100 lb. cap. @ 1" C. of G., foot pedalcontrol, S/N 2252, S/N N.A.

MK PRODUCTS AIRCRAFTER MDL. 3, variable spd. rotation, 10"dia. round platen, foot pedal control, 5" dia. 3-jaw universal chuck,S/N 2457D84.

PROXY BIDSIf you cannot attend this sale we will bid on your behalf.Contact Houston office at (713) 691-4401 for instructions,or go to our website at: www.pmi-auction.com.

5

SEAM WELDERJETLINE MDL. LWP-72 HIGH PRECISION, 72" max. weldinglength, 6" min. part dia., 32" max. part dia., Heliarc Mdl. CWF10welding carriage, S/N 80251, arranged for cold wire TIG, S/N 80227.

WELDING LATHESJETLINE MDL. CW4-192, 30" max. dia., 192" max. length, 5,000max. part width, 3-jaw universal chuck, w/10" hollow spdl., air pwrd.tailstock w/10" dia. universal chuck, approx. tailstock mtd. on rollercarriage, flux recovery pans, control pedestal, S/N 7512.

(2) JETLINE MDL. CW4-120, 30" max. dia., 120" max. length,5,000 max. part wt., 3-jaw universal chuck w/10" hollow spdl., airpwrd. tailstock w/10" dia. universal chuck, approx. tailstock mtd. onroller carriage, flux recovery pans, S/N 7511, S/N 7510.

CUSTOM POWER TILTING HEADSTOCK SYSTEM, approx. 28"swing, 19-1/2" dia. 3-jaw chuck, 7-1/2" through hole, outer 2-wheelroller suppt., 60" max. dist. chuck to roller suppt., pwr. tilting framegeared tilt mechanism, variable spd. rotation, pendant control.

ORBITAL WELDING SYSTEMESAB MDL. LTD200, 160 amp output @ 24 v. - 100% duty cycle,200 amp output @ 28 v. - 60% duty cycle, 250 amp output @30 v. - 35% duty cycle, Mdl. A21PRMA orbital welding headcontroller and control pendant Mdl. A6 travel unit w/read-out,Mdl. A21-MTC20 wire feeder unit, S/N 319-545/5025.

ORBITAL WELDING HEADS, ESAB Mdl. PRB18-40; ESABMdl. PRB36-80; ESAB Mdl. PRB71-160.

WELDING ROTARY TABLESARONSON 20,000 LB. CAP. (APPROX.), 72" dia. round slottedplaten, 3 HP H.D. gear motor drive, variable spd. rotation, pendantcontrol.

ARONSON 12,000 LB. CAP., Mdl. FT12CS-3.4, 60" dia. roundplaten, variable spd. controls, rapid traverse, S/N 7465.

ARONSON 2,500 LB. CAP., Mdl. FT28, 60" dia., variable spd.rotation, S/N 711330.

VIEW OF CUSTOMWELDING POSITIONER

72" JETLINE PRECISION SEAM WELDER WELDWIRE SUB-ARC WELDER & JETLINE WELDING LATHE

ESAB MDL LTD-200 ORBITALTIG WELDING MACHINE

ESAB ORBITAL TIG WELDING HEADS ARONSON WELDING ROTARY TABLES

3AVA

ILABLE3

AVAILAB

LE

PLANT & MACHINERY INC.APPRAISAL DIVISION

Industrial Machinery & Equipment AppraisalsCall 1-800-282-8466

ARE YOU SELLINGYOUR PLANT?

CALL 1-800-282-8466 FOR ACONFIDENTIAL CONSULTATION

6

PIPE ROLLS(2) SETS ARONSON 3,000 LB. CAP.,Mdl. SPRD-3, 14" roll centers, (2) sets ofpower and idler, 3" rubber tire x 12" dia.,variable spd., foot pedal controls, (1) driverw/idler per set, S/N 79193, S/N 80216.

PLASMATRANSFERRED ARC

SURFACING SYSTEMSSTELLITE STARWELD 1 MDL. PTA300,300 amp output @ 32 v. - 100% duty cyclefor TIG, 100 amp output @ 24 v. - 100%duty cycle for plasma, Mdl. 300/300programmer, S/N 87WS01236.

CABOT WEAR TECHNOLOGY (STEL-LITE STARWELD) MDL. 8100, Stellitepulsing plasma transfer arc powder sur-facing system, Cyclonic Mdl. 266 arcvoltage control unit, S/N 125-1062.

UNIVERSALBALANCE POSITIONERS(2) ARONSON 1,000 LB. CAP., Mdl.C1000P40, 8" dia. rotating platen, 6" dia.3-jaw universal chuck, roller stand,S/N 742266-1419.

PORTABLEWELDING MACHINE

LINCOLN MDL. SA200, 200 amp output@ 40 v., 60% duty cycle, on welded frame,gasoline pwrd., S/N N.A.

TIG WELDINGMACHINES

(3) MILLER MDL. SYNCROWAVE 300AC/DC GAS TUNGSTEN ARC WELDINGMACHINES, 300 amp output, S/N JF8-77050, S/N N/A w/SP-2 programmer,S/N JE438851, w/Syncrowave Mdl. SP4weld programmer, TIG torch, fabricatedmetal stand.

(5) MILLER MDL. 330A/BP CONSTANTCURRENT AC ARC WELDING POWERSOURCES, 300 amp output @ 30 v.DC, 300 amp output @ 40 v. AC, 60%duty cycle, S/N HG084623, S/N JE78-4438, S/N JA369331, S/N JB514456,S/N HG084592.

(3) AIRCO 300 AMP AC/DC HELI-WELDERS, Mdl. A/DDR-224HPA/B-D,300 amp output @ 30 v., 60% duty cycleDC, 300 amp output @ 40 v., 60% dutycycle, AC TIG torch and control, S/N HF-831198, S/N HJ211910, S/N HJ211902.

WELDING ROD OVENSPHOENIX MDL. BT-110 - 9 KW ELEC-TRODE OVEN w/chart recorder, timerand digital temp. controls.

PHOENIX “DRY ROD” MDL. 510-NM - 9KW ELECTRODE OVEN.

PHOENIX “DRY ROD” MDL. 9C - 2,400WATT ELECTRODE OVEN.

PHOENIX “DRY ROD”MDL. 16A - 1,000WATT ELECTRODE OVEN.

MIG WELDING MACHINES(3) MILLER MDL. INTELLIWELD 650D WELDINGPOWER SOURCES, 650 amp output @ 44 v.,100% duty cycle, Miller digital wire feeder, time andvoltage read-outs, S/N JF841318, S/N JF841319,S/N JE782398.

MILLER MDL. SRH555(S) WELDING POWERSOURCES, 600 amp output @ 40 v., 60% dutycycle, S/N JB474498, Miller Digimeter 600 digitalamperage/voltage meter, Miller Mdl. HF251D1 fre-quency arc starter.

(3) MILLER MDL. SRH-444 DC ARC WELDINGPOWER SOURCES, 400 amp output @ 36 v., 60%duty cycle, on fabricated stand, Miller Mdl. HF250-1high freq. arc starter, S/N JB474403, S/N JB4-74395, S/N JA462525.

(4) LINDE MDL. SV1-400 WELDING POWERSOURCES, 400 amp output @ 40 v., 100% dutycycle, Linde MIG-35 wire feeder, fabricated metalstand, S/N D740039374, S/N D74101391, S/N D81-B27060, S/N D80A17174.

MILLER MDL. CP250TS WELDING POWERSOURCE, 250 amp output @ 35 v., 100% duty cycle,aluminum gun, fabricated stand, S/N S410630.

MILLER MDL. SR15GHE HIGH FREQUENCY“NEEDLE ARC” POWER SOURCE, 15 amp out-put @ 15 v., 100% duty cycle, foot pedal control,S/N N289798.

<STELLITEPLASMATRANSFERREDARC WELDINGSYSTEM

<1,000 LB. CAP.ARONSON UNIVERSALBALANCE POSITIONER

>MILLER SYNCROWAVE

300 TIG WELDER

<LINCOLNGAS POWEREDPORTABLEWELDER

>CABOT PLASMATRANSFERREDARC WELDING

SYSTEM

>PHOENIX DRY ROD

OVEN

2AVAILABLE3AVAILABLE

PROXY BIDSIf you cannot attend this sale we will bid on yourbehalf. Contact Houston office at (713) 691-4401 forinstructions, or go to our website at:www.pmi-auction.com.

PULSE MIGWELDING MACHINES

(5) AIRCO MDL. PULSE ARC 500 MIG ARCWELDING POWER SOURCES, 500 ampoutput @ 42 v., 60% duty cycle, on fabricatedmetal stand, Airco System II wire feederw/roller stand, Code No. 0906, S/N RH40-4148, S/N RH404176, S/N RH404186,S/N RH601125, (2) S/N’s N/A.

ESAB MDL. SVI450I CV/CC PULSE MIGWELDING POWER SOURCE, 450 ampoutput @ 38 v., 60% duty cycle, EsabDigipulse variable digital wire feeder, rollercart, S/N MJ152130-5.

(2) AIRCO MDL. PULSE ARC 250 WELDINGPOWER SOURCES, 350 output @ 36 v.,60% duty cycle, on fabricated stand, Airco-matic System II wire feeder, Pulse Arc 500remote control, Stock No. 1345-5150, S/NRH308153, S/N N.A.

(7) AIRCO MDL. PULSE ARC PA-3AWELDING POWER SOURCES, 300 ampoutput @ 30 v., 100% duty cycle, Linde MIG35 variable spd. wire feeder, on fabricatedmetal stand, S/N JA419969, S/N JE383036,S/N JB542498, S/N JB481651, S/N JB48-1655, S/N HK277516, S/N JB542483.

TUBULAR TORCH CUTTING SYSTEM

CUSTOM, elec. eye, control system, 30'material support bed, linear pattern reader,(2) linear rail guided carriages, rotationoptical template holders, Stewart WarnerMdl. ECT-150C control system, fabricatedsteel frame, variable speed drives.

MISCELLANEOUS WELDING EQUIPMENTTHERMAL DYNAMICS PAKMASTER 50XL PLASMA CUTTING UNIT,35 amp output @ 130 v., 60% duty cycle, S/N 071359A1912010.

MILLER MDL. NPS-20AFT SPOT WELDER, foot operated, 20 KVA cap. @50% duty cycle, 12" throat depth, S/N HK248337.

LENCO SPOT MARK II MDL. L4000 PORTABLE SPOT WELDER, (6)secondary volts, 4 KVA rating, S/N B13222.

SEVERAL C.K.WORLDWIDE MDL.WF3 COLD WIRE TIG WIRE FEEDERS.

LINDE MDL. CM779ER MOTORIZED TRACK TORCH, oxy. fuel cutting head,10' track.

CUSTOM VERTICAL ROTARY WELDING SYSTEM, for thin wall tubewelding up to 1-1/2" dia. x 5-1/2" L., 4" 3-jaw chuck, V/S pwr. rotation, TIGwelding equipment.

CHEMETRON MDL. PC1 WIRE FEEDER, on fabricated stand; COBRAMATICWIRE FEEDER; WELD TORCHES; GAS CONTROL HEADS; ROSEBUDS;REGULATOR SET-UPS; LARGE QTY. OF WELDING ACCESSORIES;LARGE QTY.TIG WELDING WIRE; ELECTRICAL FITTINGS; CROSSLIDES;MANIPULATOR BRACKETS; GEARS AND SPROCKETS; TORCHES;HOSES; PLASMA TORCHES; LARGE QTY.TORCH PARTS; NIPPLES.

7

650 AMP MILLER INTELLIWELDMIG WELDER

CUSTOM TUBULAR TORCH CUTTING SYSTEM

ESAB 450 AMP PULSEMIG WELDER

COOPERHEAT INDUCTIONLOCALIZED STRESSRELIEF UNIT

3AVAILABLE

PIPE WELDINGPRE-HEAT SYSTEMS

(2) CUSTOM, elec. fired, infeed support roller systemw/pneu. lift at entry and exit, Honeywell temp. controls,skid mounted.

C-FRAME SHAFTSTRAIGHTENING PRESS

CUSTOM APPROX. 50 T. CAP., 7" ram dia., 14" throatdepth, 20' max. dist. btn. centers, roller headstock and tail-stock w/hyd. lift, Texadraulics self-contained unitized hyd.system, (2) resistance blocks, various ram extensions,operator’s control console.

INDUCTION LOCALIZEDSTRESS RELIEVING SYSTEM

COOPERHEAT, chart recorder, Cooper master digitalheat treat program module, (6) digital heating controls,roller cabinet, Unit No. SMD-84-07-0017.

At the premises of

ALLOY WELDING INC.7218 Canal • HOUSTON, TEXAS 77011

THURSDAY, DECEMBER 9 • 10:00 A.M. INSPECTION: Wednesday, December 89:00 A.M. to 4:00 P.M. & Morning of Sale

AUCTION

8

CAR BOTTOM FURNACEM&M FURNACE, gas fired, Cerwool lined, (4) gas fired burners, 60" x 60" x144" internal dims., 60" x 144" car, bar grate base, geared roller chaintraverse mechanism, digital temp. controller, Honeywell round chartrecorder and strip chart recorder, cycle timer, 1,250 deg. operating temp.,approx. 1,400 deg. F. max. temp., S/N 66-50686-1-1.

STRESS RELIEF FURNACESLINDBERG MDL. 244818-GH BOX FURNACE, gas fired, Honeywell roundchart recorder and temp. controllers, 24" x 24" x 48" approx. internal dims.,1,250 deg. F. max. operating temp., pneu. door opener, S/N 4456.

M&M BOX FURNACE, (10) burners, gas fired, 24"W. x 18"H. x 23'L., 1,250deg. F. max. temp., digital temp. controls, round chart recorder, dbl. entrydoors, skid mtd., exhaust ducting.

CUSTOM ELECTRIC FIRED POT FURNACE, 1,800 deg. F. max temp., 24"dia. x 36" deep approx. internal dims., digital temp controls.

FLAME HARDENING MACHINESCUSTOM DESIGN 12-HEAD VERTICAL SHAFT, 16' vert.carriage travel, 4" to 12" shaft dia. capacity, 24" throat depth,gas controls, timer, variable spd. carriage w/delays, propanepre-heater torch, chiller unit.

CUSTOM DESIGN 6-HEAD VERTICAL SHAFT, 12' vert.carriage travel, 1" to 6" shaft dia. capacity, 24" throat depth,variable spd. carriage, delay timers.

CUSTOM DESIGN 3-HEAD VERTICAL SHAFT, 8' vert.carriage travel, 1-1/2" to 1/2" shaft dia. capacity, 24" throatdepth, variable spd. carriage, delay timers.

CUSTOM DESIGN VERTICAL SHAFT, approx. 13' vert.carriage travel, 24" throat depth.

CUSTOM DESIGN VERTICAL SHAFT, center type, 8' max.dist. center to clamping ring, Linde Mdl. M77SERA tracktorch w/flame hardening head.

FLAME HARDENING ACCESSORIESCUSTOM PIPE ROLLER SYSTEM, solid 3" dia. rolls,back-up roll on fabricated stand.

GLENN PACIFIC WATER CHILLER SYSTEM.

WIDE ARRAY OF FLAME HARDENING HEADS ANDFIXTURES.

<M&M CARBOTTOMSTRESSRELIEVINGFURNACE

M&M GAS FIRED STRESS RELIEVING FURNACE

16' VERTICAL 12-HEAD FLAMEHARDENING MACHINE

12' VERTICAL 6-HEAD FLAMEHARDENING MACHINE

CUSTOM PIPE PREHEAT SYSTEMS CUSTOM C-FRAME STRAIGHTENING PRESS

2AVA

ILABLE

9

PRECISION INSPECTION EQUIPMENTWILSON MDL. 40UR ROCKWELL HARDNESS TESTER w/variousaccessories, S/N 40UR-362; KING BRINELL PORTABLE HARDNESSTESTER; REMSCO X-RAY VIEWER; PORTABLE TOOLBOX w/assortedhandtools.

AIR COMPRESSORSGARDNER DENVER MDL. BCFOGB "ELECTRO-SCREW” SCREW TYPE,approx. 30 HP drive, fully enclosed, skid mounted, air cooled, S/N 772959.

GARDNER-DENVER VERTICAL RECIPROCATING TYPE, 200 PSI max.pressure, 20 HP motor, 100 gal. vert. receiving tank, skid mtd., S/N 144882.

RAW MATERIALHEAVY WALL PIPE; THIN WALL PIPE; I-BEAM, ANGLE, AND CHANNELCLIPS; DUPLEX STAINLESS STEEL HEAVY WALL TUBING; FLAT SHEETS.

ROLLER PIPE SUPPORT STANDS

STAINLESS WASH TANK PARTIAL VIEW OF C-CLAMPS

PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go to our website at: www.pmi-auction.com.

At the premises of

ALLOY WELDING INC.7218 Canal • HOUSTON, TEXAS 77011

THURSDAY, DECEMBER 9 • 10:00 A.M. INSPECTION: Wednesday, December 89:00 A.M. to 4:00 P.M. & Morning of Sale

AUCTION

PARTIAL VIEW OF SHEET METAL MACHINERY

SHEETMETAL MACHINERYPEXTO 16 GA. X 36" FOOT SHEAR, Mdl. 137L;DIACRO 24" FINGER BRAKE, Mdl. 12, on fabricatedstand, S/N FA-2506; PEXTO 22 GA. X 36" SLIP ROLL,Mdl. 381-D, S/N 2/76; DIACRO MDL. 2 SHEETMETALROLLER, 12"W. cap., S/N GA1992; PEXTO 20 GA.CAP. RING AND CIRCLE SHEAR, Mdl. 299C,S/N 4/76; ROPER WHITNEY 4 T. CAP. PUNCH, Mdl.218, 12" throat depth, assorted punches and dies,S/N 1712-10-78.

MISCELLANEOUS MACHINERYBRIDGEPORT MDL. J TURRET TYPE MILLINGMACHINE, 9" x 42" table, long. pwr. feed, Mdl. J beltdriven head, spds.: 80–2,720 RPM, S/N 105526; REDARROW 20 T. CAP. HYDRAULIC H-FRAME PRESS;LOCKDOWN SECURITIES INC. MDL. 2516 BARBENDER; KALAMAZOO 12" ABRASIVE CUT-OFFSAW, 5 HP drive motor, infeed roller stand; SEARSCRAFTSMAN RADIAL ARM SAW;SEVERAL PEDESTALGRINDERS; MILWAUKEE BENCH DRILL PRESS.

SHOP FURNISHINGS& EQUIPMENT

DOZENS OF HIGH QUALITY ROLLING WELDINGSHIELDS, steel panel construction w/ball caster base;PETLAW MDL. VERSA 100C PORTABLE STEAMCLEANER, diesel fired; CUSTOM STAINLESS STEELRINSE TANK, dims: 36" x 96" x 48" dp., expanded metalbase, large back splash, 2" dia. welded rail, (2) over flowpots; ACORN 60" SQ. WELDING PLATEN; LARGEASSORTMENT OF STEEL TOP WELDING TABLES;APPROX. (40) ADJUSTABLE HEIGHT ROLLER PIPESTANDS; BAR GRATE WELDING TABLE; WIDEASSORTMENT OF A-FRAME WELDED STEEL PIPERACKS; GAS BOTTLE RACKS; METAL STORAGECABINETS; (20) 14" X 38" PROPANE STORAGEBOTTLES; (5) 24" X 24" X 24" FABRICATED STEELTANKS w/aluminum covers; (4) BAR GRATE FURNACERACKS.

HAND & POWER TOOLSWIDE SELECTION OF C-CLAMPS up to 16" throatdepth; HAMMERS; COMBINATION WRENCHES;VISE GRIPS; SOCKETS; CRESCENT WRENCHES;HACKSAWS; SCREW DRIVERS; STRAIGHT ANDRIGHT ANGLE GRINDERS; IMPACT WRENCHES;ELECTRIC DRILLS up to 3/4" cap.; CIRCULAR SAWS;FLAT WHEEL GRINDERS; HOLE SAWS;TAPE GRIND-ING WHEELS; GLOVES; WELDING PROTECTIONEQUIPMENT; WELDING HOODS; BLACK & DECKER3/4" CAP. MAGNETIC BASE DRILL; SLEDGE HAM-MER; BOLT CUTTERS; AXE; LEVELS.

10

FORKLIFTSCLARK 10,000 LB. CAP., Mdl. C500-S100, dual front cushion tires,LP pwrd., 2-stage mast, 138" max. lift height, 48"L. forks, S/N685-340-4241.

TOYOTA 8,000 LB. CAP., Mdl. 7FGCU35, new 2002, 187" liftheight, 87" 3-stage mast, LPG, solid tires, side shifter, 42" forks,S/N 60927.

TOYOTA 8,000 LB. CAP., Mdl. 7FGCU35, new 2001, 132" liftheight, 87" 2-stage full free mast, LPG, solid tires, side shift, 36"forks, S/N 60016.

(2) TOYOTA 5,000 LB. CAP., Mdl. 7FGCU225, new 2000, 258"lift height, 87" 4-stage mast, LPG, solid tires, side shifter, 42" forks,S/N 67401, S/N 67315.

CLARK 4,600 LB. CAP., Mdl. CGC25, LP pwrd., side shifter,2-stage see-through mast, 130" max. lift height, cushion tire, 42"L.forks, S/N C365L-0147-9411FB.

FLATBED TRUCK1996 CHEVROLET CHEYENNE MDL. 3500 HD, 1 T. cap., auto.trans., 92" x 160" diamond plate steel bed, w/headache rack andstake pockets, welded side rails, Alcoa aluminum wheels, bed mtd.toolboxes, Odo: 114,000 miles, TX Lic. No. Alloy-2, VIN1GBKC34J1TJ110286.

COLUMN-MOUNTEDJIB CRANES

(16) CUSTOM, approx.20' beam length, Coffing 1 T.elec. chain hoist.

(9) CUSTOM 15'L., Coffing and Budgit 1 T. cap. elec. chain hoists.

ELECTRIC SHOP CARTCLUB CAR MDL. CARRY-ALL, surrey top, 36" x 42" drop bed onback battery pwrd., pneu. tires, charger, S/N F9419378759.

MISCELLANEOUSMATERIAL HANDLING EQUIPMENT

(4) BLUE GIANT P27X48 - 5,000 LB. CAP. HYDRAULIC PALLETJACKS; WEIGHTRONIX 10,000 LB. CAP. PLATFORM SCALE,48" x 48" platform, D.R.O.; WEIGHTRONIX 200 LB. CAP. SCALE,Mdl. BS2424A, D.R.O.; PENNSYLVANIA PLATFORM SCALE,Mdl. 7500 w/DRO; VERTICAL MATERIAL STORAGE RACKS;CANTILEVER BAR AND TUBE STORAGE RACKS; (4) 48" X 96"STEEL TOP TABLES on caster base; (4) A-FRAME DESIGNROLLER PIPE STANDS; STEEL WORKBENCHES WITH VISES;(7) SECTIONS OF ADJ. PALLET RACKING, 3 tiers in ht., 10'uprights, 48" depth; CUSTOM 4-WHEEL YARD BUGGY, pneu.tires, 12' overall length, 60" overall width, adj. tongue length.

PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) 691-4401 for instructions, or go toour website at: www.pmi-auction.com.

VIEW OF (1 OF 2) TOYOTA5,000 LB. FORKLIFTS

CLUB CAR CARRY-ALL ELECTRIC CART

VIEW OF CLARK FORKLIFTS VIEW OF (1 OF 2) 8,000 LB. FORKLIFTS

CHEVROLET CHEYENNE 3500 FLATBED TRUCK

2000

1996

NEW AS

2002

11

AIR HANDLER SYSTEMCARRIER MDL. 40RR024530, 230/460 v. pwr. indoor rating, S/N X497060.

PORTABLE AIR CONDITIONING SYSTEMS(3) QUIET COOL PORTABLE COOLING SYSTEMS, waterfall type cooler, 36" dia. fan.

OFFICE FURNITURE42" X 78" MAHOGANY CONFERENCE TABLE W/(2) END CHAIRS AND (4) SIDE CHAIRS; 48" SQ.MAHOGANY CHIPPENDALE STYLE COFFEE TABLE; SECTIONAL SOFA; 5-PIECE SECTIONALSOFA; MAHOGANY CHIPPENDALE STYLE SOFA TABLE; (2) 15' X 9' X 65" PANEL HT. OFFICECUBICLES; 30" X 60" BLONDE WOOD DESK W/MATCHING CREDENZA; 36" X 72" FORMICADESK W/MATCHING CREDENZA; EXECUTIVE SWIVEL CHAIR; 30" X 60" SECRETARIAL DESKW/RETURN AND SWIVEL CHAIR; (10) FRAMED OILFIELD PRINTS; 42" X 88" EXECUTIVEMAHOGANY DESK W/MATCHING CREDENZA; MATCHING 2-DOOR CABINET; 89"W. SIDECREDENZA W/BOOKSHELF; COFFEE TABLE; (2) 36" SQ. END TABLES; SOFA; 48" HEXAGONALCONFERENCE TABLE W/(4) SWIVEL CHAIRS; 30" X 60" SECRETARIAL DESK W/RETURN; (6)4-DRAWER LETTER SIZE LOCKING FILE CABINETS; (9) 2-DRAWER LATERAL LETTER SIZEFILE CABINETS; (2) 16" X 103" SECRETARIAL DESKS W/TYPING TABLE AND DUAL GLASSFRONT CABINETS; (2) 48" ROUND CONFERENCE TABLES; SOFA; (2) SIDE TABLES;MAHOGANY COFFEE TABLE; LAMPS; 36" X 60" GLASS COFFEE TABLE; SOFA; (2) END TABLES;COFFEE TABLE 36" X 60" FORMICA DESK W/MATCHING CREDENZA; 3-DRAWER LETTERSIZE LATERAL FILE CABINETS; (2) SHELF UNITS; 36" X 72" L-SHAPED DESK; 30" X 72" DOUBLEPEDESTAL EXECUTIVE DESK W/MATCHING CREDENZA; MUCH MUCH MORE!

OFFICE EQUIPMENT& SUPPLIES

OFFICE SUPPLIES; BINDERS;S TA M P S ; C O P Y PA P E R ;CALCULATORS; PRINTERS;CLEANING SUPPLIES; LANIERMDL. 6375 COPIER w/documentfe e d e r a n d c o l l a t o r ; G B CVELLOBIND MDL. 223 BINDINGMACHINE; IBICO LAMINATINGMACHINE; PAPER CUTTERS;

PERSONALCOMPUTERS

DELL PENTIUM II w/17" monitorand Hewlet t -Packard PhotoSmart 1115 printer; RELISYSP E N T I U M w / 1 5 " m o n i t o r ;COMPAQ PENTIUM III w/17"LCD monitor.

At the premises of

ALLOY WELDING INC.7218 Canal

HOUSTON, TEXAS 77011

AUCTION

THURSDAYDECEMBER 910:00 A.M.

INDUSTRIAL REAL ESTATE TO BE SOLD BY PRIVATE NEGOTIATION7218 Canal Street, Houston, Texas. Approximately 83,537 sq. ft. (1.918) Acres. 43,773 sq. ft. total building area, 34,581 sq. ft. manufacturingspace, crane served, HID lighting, heavy 3-phase electrical service, plumbed throughout for compressed air and welding gasses, 9,192sq. ft. finished office space. High finish executive office space w/Jacuzzi and sauna rooms. Site features asphalt parking areas,security fences, exterior lighting, and security system. To be sold by private negotiation. For more information contact Rodney Linehan (713) 526-3791.

CARRIER AIRHANDLER SYSTEM

EXECUTIVE SUITE FURNITURE

FRONT VIEW OF REAL ESTATE

IP-4152928

PROXY BIDSIf you cannot attend this sale we will bid on your behalf. Contact Houston office at(713) 691-4401 for instructions, or go to our website at: www.pmi-auction.com.

WELDING, HARD FACING,OVERLAY, & HEAT

TREATMENT MACHINERYFeaturing: Tig, Pulse Mig,

& Plasma Transfer Welding Systems, Wide Selection of Side Beam Systems With Oscillators, Welding Positionersto 12,000 Lb., Welding Manipulators,

Flame Hardening & Heat Treating Equipment,Forklifts, as New as 2002,

Rolling Stock, High Quality Office Furniture,Much, Much More!

Plus Real Estate to Be Sold by PrivateNegotiation, See Page 11

AUCTIONHOUSTON, TEXAS

A 10% Buyer’s Premium will apply.

Everything will be sold to the highest bidder or bidders forcash in accordance with the auctioneer’s Customary Termsof Sale, copies of which will be posted on the premises.

ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’SCHECK, WIRE TRANSFER OR COMPANY CHECK WITHBANK LETTER GUARANTEEING PAYMENT TO PLANT &MACHINERY, INC.

Here is an example of what your letter should be: Mr.“Customer Name” is a customer of this bank. This bank willguarantee unqualified payment to PMI on the account listedherein up to the amount of $______. This letter is good untilJanuary 10, 2005.

In default of payment of bills in full within the time thereinspecified, the Auctioneer in addition to all other remediesallowed by law, may retain all monies received as deposit orotherwise, as liquidated damages. All items must be removedby the time announced at the start of the sale.

Lots not paid for and/or removed within the time allowedmay be resold at public or private sale without further notice,and any deficiency, together with all expenses and chargeof resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspectedall of the assets upon which he will be bidding and/ordoes purchase.Buyer agrees to accept assets purchased “AS IS,” “WITHALL FAULTS” and “WITH REMOVAL AT BUYER’S RISKAND EXPENSE.”THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PARTOF THE AUCTIONEER AS AGENT AND THE SELLER, ANYWARRANTY AS TO FITNESS OR USABILITY OF ALL THEASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIMIN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSETPURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnifyand hold the auctioneer and seller harmless from any futureclaim which shall pertain to the fitness or use of that asset as

being purchased. Riggers, movers, electricians and buyersperforming work at the Auction Site must provide PMI withevidence of insurance. The insurance coverage must be at alevel acceptable to PMI and to the seller. PMI reserves theright to withdraw items, alter the order of the sale, accept bidsfrom the seller, and group lots as it may deem appropriate.

Although all information has been obtained from sourcesdeemed reliable, the auctioneer and seller make no warrantyor guarantee, expressed or implied, as to the accuracy ofthe information herein contained, or contained in our catalog.It is for this reason that buyers should avail themselves of theopportunity to make inspection prior to the auction. Althoughit is not likely, auction sales are subject to cancellation orpostponement. Kindly contact auctioneer prior to attendance.

These terms and conditions may be modified or supplementedby language in the catalog available at the sale site orby announcement at the start of the sale. Bidders shouldbe attentive to those announcements and to the cataloglanguage.

TERMS & CONDITIONS

PLANT & MACHINERY INC. APPRAISAL DIVISIONIndustrial Machinery & Equipment Appraisals Call 1-800-282-8466

ARE YOUSELLING

YOURPLANT?

CALL1-800-282-8466

FOR ACONFIDENTIALCONSULTATION

PLANT & MACHINERY INC.AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE

P.O. Box 19100Houston,TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

PUBLIC INVITEDTHURSDAY, DECEMBER 9 • 10:00 A.M.

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

DIRECTIONSFROM HOBBY AIRPORT: Exit airport using Broadway to I-45 North. Take I-45 (Gulf Freeway)north and proceed to the Wayside Exit. Turn right on Wayside and proceed to the split of Waysideand Macario Garcia Blvd. Proceed on Macario Garcia Blvd. to Canal St. Turn right on Canal St. andproceed approx. 1 mile to the auction site, 7218 Canal St., on your right. Watch for auction signs. FROM INTERCONTINENTAL AIRPORT: Exit the airport using John F. Kennedy Blvd. towards Beltway8 East. Take the Beltway 8 East (left) to US-59 South. Proceed on US-59 South about 12.5 miles.Merge onto I-10E/US-90E toward Beaumont/Baytown. Take Exit 771B toward Lockwood Dr. Turn righton Lockwood Dr. and proceed approx. 1.7 miles to Navigation Blvd. Turn left on Navigation Blvd.and proceed to Wayside Dr. Turn right on Wayside Dr. and proceed to Canal St. Turn left on Canal St.and proceed to auction site, 7218 Canal St. Watch for auction signs.

LODGINGHoliday Inn Intercontinental Airport ...................15222 John F. Kennedy Blvd. ....(281) 449-2311Marriott Intercontinental Airport .........................18700 John F. Kennedy Blvd. ....(281) 443-2310Ramada Limited Intercontinental Airport ...........15350 John F. Kennedy Blvd......(281) 442-1830Hampton Inn Hobby Airport ...............................8620 Airport Blvd. .....................(713) 641-6400Marriott Hobby Airport .......................................9100 Gulf Frwy. .........................(713) 943-7979